Re: Using ax25ipd

[David Ranch <linux-hams@xxxxxxxxxxx>]

Here are my notes I wrote down to get this working in a very manual 
fashion   Should be too hard to automate this in a script (see the URL 
below)

--David


09/04/2011

http://wiki.complete.org/LinuxPacketRadio#ax25ipd-1

  - requires changes to ax25-apps too --

1. Update /etc/ax25/axports and define the ipct port

2. /usr/sbin/kissnetd -p2 &
   - Please record the FIRST port and SECOND port out of that list
     for follow-on commands

3. /usr/sbin/kissattach -l /dev/pts/7 ipct 44.4.10.40
   - In this example, /dev/pts/7 camesfrom the output of the kissnetd
     command above.  44.4.10.40 is my AMPR IP address

4. From the output of command in step 2, take the SECOND port given (not the
   first port) and put that into /etc/ax25/ax25ipd.conf for the 
"device" line

5. run /usr/sbin/ax25ipd

6. Per db0fhn security, you MUST log into Echolink via the same egress IP
   address (easily done via NAT) as this AXUDP connection.

7. Connect to the remote station:

   call ipct db0fhn


--
To unsubscribe from this list: send the line "unsubscribe linux-hams" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html