Re: Running python from ax25d?
|[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]|
Gordon JC Pearce wrote:
#!/usr/bin/python2 -u # saved as /home/gordonjcp/test.py # corresponding line in ax25d.conf is # default * * * * * * - gordonjcp /home/gordonjcp/test.py test.py import sys a="" print "Hello" while(a.strip()!="stop"): a = sys.stdin.readline() print "you typed " + a
End-of-line problems maybe? On packet radio CR is the de facto EOL character. Python file objects readline() method probably seeks for a LF... Have you tried eg. sys.stdin.read(1) to see if you get what you wrote back one character at a time?
From ax25d, it prints "Hello" but does not respond to any keyboardinput. Furthermore, if I close down the connection from call(1) I get the following: Traceback (most recent call last): File "/home/gordonjcp/test.py", line 7, in <module> a = sys.stdin.readline() IOError: [Errno 107] Transport endpoint is not connected The IO error seems to suggest that there is no connection from stdin as handled by ax25d to Python. I'm not sure if this is because stdin goes away when the connection is closed, or because it was never there to begin with.
I'd say it's because the connection was closed. Although ENOTCONN is a somewhat strange error here... hmm. /Tomi -- To unsubscribe from this list: send the line "unsubscribe linux-hams" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html