Re: ext4_fallocate

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 6/26/12 3:57 PM, Eric Sandeen wrote:
> On 6/26/12 3:30 PM, Ric Wheeler wrote:
> 
>> Thanks!  Eric is also running some tests to evaluate the impact of various techniques :)
>>
>> ric
> 
> Yup forgive me for interjecting actual numbers into the discussion ;)
> 
> I tried running this fio recipe on v3.3, which I think does a decent job of
> emulating the situation (fallocate 1G, do random 1M writes into it, with
> fsyncs after each):
> 
> [test]
> filename=testfile
> rw=randwrite
> size=1g
> filesize=1g
> bs=1024k
> ioengine=sync
> fallocate=1
> fsync=1
> 
> Stock ext4 (3 tests w/ file remove & cache drop in between):
> 
>   WRITE: io=1024.0MB, aggrb=16322KB/s, minb=16713KB/s, maxb=16713KB/s, mint=64243msec, maxt=64243msec
>   WRITE: io=1024.0MB, aggrb=16249KB/s, minb=16639KB/s, maxb=16639KB/s, mint=64528msec, maxt=64528msec
>   WRITE: io=1024.0MB, aggrb=16370KB/s, minb=16763KB/s, maxb=16763KB/s, mint=64052msec, maxt=64052msec

And as a sanity check, here are the rates for overwriting existing, written blocks in the file:

  WRITE: io=1024.0MB, aggrb=17778KB/s, minb=18205KB/s, maxb=18205KB/s, mint=58980msec, maxt=58980msec
  WRITE: io=1024.0MB, aggrb=17825KB/s, minb=18252KB/s, maxb=18252KB/s, mint=58826msec, maxt=58826msec
  WRITE: io=1024.0MB, aggrb=17769KB/s, minb=18195KB/s, maxb=18195KB/s, mint=59010msec, maxt=59010msec

so this does look like about ~10% overhead for converting the extents.

> With the patch which exposes other users' data:
> 
>   WRITE: io=1024.0MB, aggrb=17840KB/s, minb=18268KB/s, maxb=18268KB/s, mint=58776msec, maxt=58776msec
>   WRITE: io=1024.0MB, aggrb=17841KB/s, minb=18269KB/s, maxb=18269KB/s, mint=58773msec, maxt=58773msec
>   WRITE: io=1024.0MB, aggrb=17828KB/s, minb=18255KB/s, maxb=18255KB/s, mint=58816msec, maxt=58816msec

overwrites:

  WRITE: io=1024.0MB, aggrb=17768KB/s, minb=18194KB/s, maxb=18194KB/s, mint=59014msec, maxt=59014msec
  WRITE: io=1024.0MB, aggrb=17855KB/s, minb=18283KB/s, maxb=18283KB/s, mint=58726msec, maxt=58726msec
  WRITE: io=1024.0MB, aggrb=17838KB/s, minb=18266KB/s, maxb=18266KB/s, mint=58783msec, maxt=58783msec

As expected, overwriting stale data is no slower than overwriting file data.

> so about 10% faster than without.
> 
> XFS, FWIW:
> 
>   WRITE: io=1024.0MB, aggrb=24008KB/s, minb=24584KB/s, maxb=24584KB/s, mint=43675msec, maxt=43675msec
>   WRITE: io=1024.0MB, aggrb=24069KB/s, minb=24647KB/s, maxb=24647KB/s, mint=43564msec, maxt=43564msec
>   WRITE: io=1024.0MB, aggrb=24054KB/s, minb=24632KB/s, maxb=24632KB/s, mint=43591msec, maxt=43591msec

overwrites:

  WRITE: io=1024.0MB, aggrb=24108KB/s, minb=24687KB/s, maxb=24687KB/s, mint=43494msec, maxt=43494msec
  WRITE: io=1024.0MB, aggrb=24129KB/s, minb=24708KB/s, maxb=24708KB/s, mint=43456msec, maxt=43456msec
  WRITE: io=1024.0MB, aggrb=24164KB/s, minb=24744KB/s, maxb=24744KB/s, mint=43393msec, maxt=43393msec

looks like negligible overhead for the conversions here, < 1%.

-Eric

> which is 35% faster than ext4 with the risky patch.
> 
> Haven't yet tried overwrites or done any tracing or profiling, but I think the fio recipe is a decent demonstrator, I'll try the overwrites etc in a bit when I get a moment.
> 
> -Eric
> --
> To unsubscribe from this list: send the line "unsubscribe linux-ext4" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 


--
To unsubscribe from this list: send the line "unsubscribe linux-ext4" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Reiser Filesystem Development]     [Ceph FS]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux FS]     [Yosemite National Park]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Device Mapper]     [Linux Media]

  Powered by Linux