Fwd: About HVR1250 cant load the driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Hi there:
Can anyone tell me is that because my driver is not loaded or the
signal I got is not in the right frequency?

so when i do "dmesg | grep -i dvb"
it shows

     tveeprom 1-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L')
PAL(D/D1/K) ATSC/DVB Digital (eeprom 0xf4)
     cx23885_dvb_register() allocating 1 frontend(s)
     cx23885[0]: cx23885 based dvb card
     DVB: registering new adapter (cx23885[0])
     DVB: registering adapter 0 frontend 0 (NXP TDA10048HN DVB-T)...
     tda10048_firmware_upload: waiting for firmware upload
     firmware: requesting dvb-fe-tda10048-1.0.fw
     DVB: adapter 0 frontend 0 frequency 134513322 out of range

Thank you so much !!!!!!!

---------- Forwarded message ----------
From: Tu-Tu Yu <tutuyu@xxxxxxx>
Date: Thu, Apr 16, 2009 at 4:59 PM
Subject: About HVR1250 cant load the driver
To: linux-dvb@xxxxxxxxxxx

Dear Sirs:
I have tried to install HVR 1200 in my machine...
I follow the step on the website. But it seems like i didn't load the
driver. Could somebody tell me which step i did wrong?
Thank you so much!!!!

  1. Change into the v4l-dvb directory:

     cd v4l-dvb

  2. Build the modules:


  3. Install the modules:

     make install

  4. Download the files from and
follow the instructions in the readme.txt
  (on this step i do sh on one machine and then copy those
3 files to both /lib/firmware and /lib/firmware/2.6.26, because the
machine i am using now doesn't support unzip)

  5. add this line to /etc/modules.d/dvb:
  (on this step because there is no modules.d/dvb file in my machine
so i create it by mkdir)

after i reboot, and scan, it shows:

    scanning /usr/share/dvb/dvb-t/uk-Oxford
    using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
    initial transponder 578000000 0 3 9 1 0 0 0
    initial transponder 850000000 0 2 9 3 0 0 0
    initial transponder 713833000 0 2 9 3 0 0 0
    initial transponder 721833000 0 3 9 1 0 0 0
    initial transponder 690000000 0 3 9 1 0 0 0
    initial transponder 538000000 0 3 9 1 0 0 0
     >>> tune to:
    WARNING: >>> tuning failed!!!
    >>> tune to:
(tuning failed)
    WARNING: >>> tuning failed!!!

linux-dvb users mailing list
For V4L/DVB development, please use instead linux-media@xxxxxxxxxxxxxxx

[Linux Media]     [Video 4 Linux]     [Video Technology]     [Asterisk]     [Photo]     [Samba]     [Xorg]     [Xfree86]     [Devices]     [DVB Maintainer]     [Linux USB]