|
|
|
About HVR1250 cant load the driver | |
| [Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] | |
Dear Sirs:
I have tried to install HVR 1200 in my machine...
I follow the step on the website. But it seems like i didn't load the
driver. Could somebody tell me which step i did wrong?
Thank you so much!!!!
Audrey
1. Change into the v4l-dvb directory:
cd v4l-dvb
2. Build the modules:
make
3. Install the modules:
make install
4. Download the files from http://steventoth.net/linux/hvr1200/ and
follow the instructions in the readme.txt
(on this step i do sh extract.sh on one machine and then copy those
3 files to both /lib/firmware and /lib/firmware/2.6.26, because the
machine i am using now doesn't support unzip)
5. add this line to /etc/modules.d/dvb:
(on this step because there is no modules.d/dvb file in my machine
so i create it by mkdir)
after i reboot, and scan, it shows:
scanning /usr/share/dvb/dvb-t/uk-Oxford
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
initial transponder 578000000 0 3 9 1 0 0 0
initial transponder 850000000 0 2 9 3 0 0 0
initial transponder 713833000 0 2 9 3 0 0 0
initial transponder 721833000 0 3 9 1 0 0 0
initial transponder 690000000 0 3 9 1 0 0 0
initial transponder 538000000 0 3 9 1 0 0 0
>>> tune to:
578000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_3_4:FEC_AUTO:QAM_16:TRANSMISSION_MODE_2K:GUARD_INTERVAL_1_32:HIERARCHY_NONE
WARNING: >>> tuning failed!!!
>>> tune to:
578000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_3_4:FEC_AUTO:QAM_16:TRANSMISSION_MODE_2K:GUARD_INTERVAL_1_32:HIERARCHY_NONE
(tuning failed)
WARNING: >>> tuning failed!!!
_______________________________________________
linux-dvb users mailing list
For V4L/DVB development, please use instead linux-media@xxxxxxxxxxxxxxx
linux-dvb@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb