|
|
|
Not able to view HD-TV via Technisat Skystar HD 2 | |
| [Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] | |
Hi,
since 3 days I have a Technisat Skystar HD 2 in my Computer (PCI-card).
OS is Opensuse 11.0 (kernel 2.6.25) without vdr but with Kaffeine as
frontend. I installed the multiproto-mantis driver and got the card
working, so I can watch dvb-s with Kaffeine. But: not dvb-s2! Perhaps I
got the wrong version of scan, but scan works (scan -a 1 -x 0 -t 1
/usr/share/dvb/dvb-s/Astra-19.2E > ~/.szap/channels.conf), but does not
find any s2-channels. I tried some versions of dvb-utils and patches,
but none were done by make and I have no clue, where to get the right
versions of both. I've read about some options which could be given to
the modules, but I don't know which and how, the card starts (only now
by hand) with modprobe mantis and both the STB-modules come up too.
(Attention: there ist a dvb-t-reciever too which makes adapter0, see lsmod))
/sbin/lspci
00:09.0 Multimedia controller: Twinhan Technology Co. Ltd Mantis DTV PCI
Bridge Controller [Ver 1.0] (rev 01)
/sbin/lspci -vv
00:09.0 Multimedia controller: Twinhan Technology Co. Ltd Mantis DTV PCI
Bridge Controller [Ver 1.0] (rev 01)
Subsystem: Device 1ae4:0003
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort+ <MAbort- >SERR- <PERR- INTx-
Latency: 32 (2000ns min, 63750ns max)
Interrupt: pin A routed to IRQ 17
Region 0: Memory at fb000000 (32-bit, prefetchable) [size=4K]
Kernel driver in use: Mantis
/sbin/lsmod | grep dvb
dvb_pll 27656 1
dvb_usb_nova_t_usb2 25348 0
dvb_usb_dibusb_common 27780 1 dvb_usb_nova_t_usb2
dib3000mc 31368 2 dvb_usb_dibusb_common
dvb_usb 41228 2 dvb_usb_nova_t_usb2,dvb_usb_dibusb_common
dvb_core 117668 3 mantis_core,stv0299,dvb_usb
firmware_class 27776 1 dvb_usb
i2c_core 45344 18
mantis,mantis_core,tda665x,lnbp21,mb86a16,stb6100,tda10021,tda10023,zl10353,stb0899,stv0299,dvb_pll,mt2060,i2c_viapro,nvidia,dib3000mc,dibx000_common,dvb_usb
usbcore 188376 6
usb_storage,dvb_usb_nova_t_usb2,dvb_usb,ehci_hcd,uhci_hcd
dmesg
mantis stop feed and dma
stb6100_set_bandwidth: Bandwidth=61262500
stb6100_get_bandwidth: Bandwidth=62000000
stb6100_get_bandwidth: Bandwidth=62000000
stb6100_set_frequency: Frequency=1236000
stb6100_get_frequency: Frequency=1235988
stb6100_get_bandwidth: Bandwidth=62000000
mantis start feed & dma
What should I try?
Regards,
Spielmops-Hartmut
_______________________________________________
linux-dvb users mailing list
For V4L/DVB development, please use instead linux-media@xxxxxxxxxxxxxxx
linux-dvb@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb