Google
  Web www.spinics.net

Re: Upcoming DVB-T channel changes for HH (Hamburg)

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]


Hi all,

I've just conducted a little test using the de-Sachsen-Anhalt scan file. 
  As expected, only 3 lines actually worked (those muxes transmitted 
from Mt. Brocken).

The line for 498 Mhz (Ch24 Halle-Saale), which is

T 498000000 8MHz 2/3 NONE QAM64 8k 1/4 NONE # CH24: Das Erste, arte, 
Phoenix, EinsFestival

does actually tune to the Ch 24 from Braunschweig, but fails to 
recognize the stations there, because of QAM64:

 >>> tune to: 
498000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE
WARNING: filter timeout pid 0x0011
WARNING: filter timeout pid 0x0000
WARNING: filter timeout pid 0x0010

Using the correct setting of QAM16 gives:

using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
 >>> tune to: 
498000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_16:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE
0x0000 0x4015: pmt_pid 0x0150 RTL World -- RTL Television (running)
0x0000 0x4016: pmt_pid 0x0160 RTL World -- RTL2 (running)
0x0000 0x4017: pmt_pid 0x0170 RTL World -- Super RTL (running)
0x0000 0x4022: pmt_pid 0x0220 RTL World -- VOX (running)

Both testes 10 times....

BOUWSMA Barry schrieb:
>>=> Does it matter, e.g. would instead of the unreceivable Ch24 from 
>>Halle-Stadt the Braunschweig Ch24 be found? (I did not test this).
> 
> This all depends on the device.  At least some of my tuners
> effectively will lock a signal as if I've specified `AUTO'
> in place of everything, even when what I specify is wrong.

So for my Yakumo DVB-T stick it does matter :(

> In reality, when I've been in a new location and done a scan
> without knowing transmitter site details, I've just used a
> general purpose scanfile I've created which goes from 474 in
> 8MHz steps up to 850 or so, like
> ### Kanal 68 UHF
> T 850000000 8MHz AUTO AUTO AUTO AUTO AUTO AUTO

So why then not provide a generic scan file listing all freq with AUTO 
parameters?

Regards, Tobias

_______________________________________________
linux-dvb users mailing list
For V4L/DVB development, please use instead linux-media@xxxxxxxxxxxxxxx
linux-dvb@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

[Linux Media]     [Video 4 Linux]     [Video Technology]     [Asterisk]     [Photo]     [Samba]     [Xorg]     [Xfree86]     [Devices]     [DVB Maintainer]     [Linux USB]