Re: How to use scan-s2?
|[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]|
Artem Makhutov schrieb: > Hello, > > I am wondering on how to use scan-s2. > > When running scan-s2 like this I am only getting 13 services: > > scan-s2 -a 2 -o zap /usr/share/dvb/dvb-s/Astra-19.2E > channels.conf > > when running > > scan-s2 -a 2 -n -o zap /usr/share/dvb/dvb-s/Astra-19.2E > channels.conf > > then I am getting 152 services. > > When running the old dvbscan application I am getting 1461 services: > > dvbscan -a 2 -o zap /usr/share/dvb/dvb-s/Astra-19.2E > channels.conf > > > Have I missed a parameter in scan-s2 or what else could be the problem? > > Thanks, Artem Hi Artem! I had the same "problem".When add no options I am only getting a few services. When I add the "-n" option I get some more services but all services I only get, when I am adding "-n -5". the "-5" means: multiply all filter timeouts by factor 5 for non-DVB-compliant section repitition rates The scan takes a long time then, but I get 1476 services (Astra 19.2). My device is a Pinnacle PCTV 452e (USB). Perhaps this switch is working with your device, too? Jens _______________________________________________ linux-dvb users mailing list For V4L/DVB development, please use instead linux-media@xxxxxxxxxxxxxxx linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb