Re: DVICO Dual Digital 4 DVB-T Revision2 : Strange Remote Control Issue

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



>Is there a way to test this and/or reset  the card to its original state?

I had an earlier model Dvico Dual Tuner with similar problems when I first tried to make it work (linux drivers were not part of the kernel at that stage).  It would work in windows, but had problems in linux.  To resolve the firmware issue I removed the power cord from my pc and left it overnight.  Leaving the power cord attached was not good enough.  That seemed to clear any firmware on the card.  Next time I used it linux told me it detected the card "cold" and loaded firmware.  I think windows did the same thing.  If it didn't, I removed and reinstalled the windows drivers.

Simply rebooting the pc did not work either.

Craig


      

_______________________________________________
linux-dvb users mailing list
For V4L/DVB development, please use instead linux-media@xxxxxxxxxxxxxxx
linux-dvb@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

[Index of Archives]     [Linux Media]     [Video 4 Linux]     [Asterisk]     [Samba]     [Xorg]     [Xfree86]     [Linux USB]

  Powered by Linux