The IS_ENABLED(CONFIG_COMEDI_AMPLC_PC236_ISA) and
IS_ENABLED(CONFIG_COMEDI_AMPLC_PC236_PCI) macro calls are a bit
long-winded. Define a couple of macros DO_ISA and DO_PCI as
abbreviations for them.
Signed-off-by: Ian Abbott <abbotti@xxxxxxxxx>
---
v2: + Changed position in sequence of patches.
---
drivers/staging/comedi/drivers/amplc_pc236.c | 17 +++++++++--------
1 files changed, 9 insertions(+), 8 deletions(-)
diff --git a/drivers/staging/comedi/drivers/amplc_pc236.c b/drivers/staging/comedi/drivers/amplc_pc236.c
index 88aa179..c644385 100644
--- a/drivers/staging/comedi/drivers/amplc_pc236.c
+++ b/drivers/staging/comedi/drivers/amplc_pc236.c
@@ -61,6 +61,9 @@ unused.
#define PC236_DRIVER_NAME "amplc_pc236"
+#define DO_ISA IS_ENABLED(CONFIG_COMEDI_AMPLC_PC236_ISA)
+#define DO_PCI IS_ENABLED(CONFIG_COMEDI_AMPLC_PC236_PCI)
+
/* PCI236 PCI configuration register information */
#define PCI_VENDOR_ID_AMPLICON 0x14dc
#define PCI_DEVICE_ID_AMPLICON_PCI236 0x0009
@@ -103,14 +106,14 @@ struct pc236_board {
enum pc236_model model;
};
static const struct pc236_board pc236_boards[] = {
-#if IS_ENABLED(CONFIG_COMEDI_AMPLC_PC236_ISA)
+#if DO_ISA
{
.name = "pc36at",
.bustype = isa_bustype,
.model = pc36at_model,
},
#endif
-#if IS_ENABLED(CONFIG_COMEDI_AMPLC_PC236_PCI)
+#if DO_PCI
{
.name = "pci236",
.devid = PCI_DEVICE_ID_AMPLICON_PCI236,
@@ -138,15 +141,13 @@ struct pc236_private {
/* test if ISA supported and this is an ISA board */
static inline bool is_isa_board(const struct pc236_board *board)
{
- return IS_ENABLED(CONFIG_COMEDI_AMPLC_PC236_ISA)
- && board->bustype == isa_bustype;
+ return DO_ISA && board->bustype == isa_bustype;
}
/* test if PCI supported and this is a PCI board */
static inline bool is_pci_board(const struct pc236_board *board)
{
- return IS_ENABLED(CONFIG_COMEDI_AMPLC_PC236_PCI)
- && board->bustype == pci_bustype;
+ return DO_PCI && board->bustype == pci_bustype;
}
/*
@@ -562,7 +563,7 @@ static int __devinit pc236_attach_pci(struct comedi_device *dev,
{
int ret;
- if (!IS_ENABLED(CONFIG_COMEDI_AMPLC_PC236_PCI))
+ if (!DO_PCI)
return -EINVAL;
dev_info(dev->class_dev, PC236_DRIVER_NAME ": attach pci %s\n",
@@ -621,7 +622,7 @@ static struct comedi_driver amplc_pc236_driver = {
.num_names = ARRAY_SIZE(pc236_boards),
};
-#if IS_ENABLED(CONFIG_COMEDI_AMPLC_PC236_PCI)
+#if DO_PCI
static DEFINE_PCI_DEVICE_TABLE(pc236_pci_table) = {
{ PCI_DEVICE(PCI_VENDOR_ID_AMPLICON, PCI_DEVICE_ID_AMPLICON_PCI236) },
{0}
--
1.7.8.6
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/devel
[Linux Driver Backports]
[Video for Linux]
[Linux USB Devel]
[Linux Audio Users]
[Photos]
[Yosemite Photos]
[Free Singles Community]
[Linux Kernel]
[Linux SCSI]
[XFree86]
[Yosemite Backpacking]