[PATCH 3/4] staging: comedi: amplc_pc263: separately configure ISA and PCI

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]


The amplc_pc263 driver supports both ISA and PCI cards, but currently
it is only possible to select the driver if PCI is configured.  This
patch splits the configuration to make the ISA and PCI parts seperately
selectable, and changes the driver to only include the selected ISA
and/or PCI board types.

Also fix a conditionally mismatched brace in pc263_detach().

Signed-off-by: Ian Abbott <abbotti@xxxxxxxxx>
---
 drivers/staging/comedi/Kconfig               |   21 +++++++-
 drivers/staging/comedi/drivers/amplc_pc263.c |   65 ++++++++++++++++++--------
 2 files changed, 63 insertions(+), 23 deletions(-)

diff --git a/drivers/staging/comedi/Kconfig b/drivers/staging/comedi/Kconfig
index df6eb2a..391a713 100644
--- a/drivers/staging/comedi/Kconfig
+++ b/drivers/staging/comedi/Kconfig
@@ -233,6 +233,16 @@ config COMEDI_AMPLC_PC236_ISA
 	  To compile this driver as a module, choose M here: the module will be
 	  called amplc_pc236.
 
+config COMEDI_AMPLC_PC263_ISA
+	tristate "Amplicon PC263 relay board support"
+	select COMEDI_AMPLC_PC263
+	default N
+	---help---
+	  Enable support for Amplicon PC263 ISA relay board.
+
+	  To compile this driver as a module, choose M here: the module will be
+	  called amplc_pc263.
+
 config COMEDI_RTI800
 	tristate "Analog Devices RTI-800/815 ISA card support"
 	default N
@@ -814,11 +824,12 @@ config COMEDI_AMPLC_PC236_PCI
 	  To compile this driver as a module, choose M here: the module will be
 	  called amplc_pc236.
 
-config COMEDI_AMPLC_PC263
-	tristate "Amplicon PC263 and PCI263 relay board support"
+config COMEDI_AMPLC_PC263_PCI
+	tristate "Amplicon PCI263 relay board support"
+	select COMEDI_AMPLC_PC263
 	default N
 	---help---
-	  Enable support for Amplicon PC263 and PCI263 relay boards
+	  Enable support for Amplicon PCI263 relay board.
 
 	  To compile this driver as a module, choose M here: the module will be
 	  called amplc_pc263.
@@ -1414,3 +1425,7 @@ config COMEDI_AMPLC_PC236
 	def_tristate N
 	depends on COMEDI
 	select COMEDI_8255
+
+config COMEDI_AMPLC_PC263
+	def_tristate N
+	depends on COMEDI
diff --git a/drivers/staging/comedi/drivers/amplc_pc263.c b/drivers/staging/comedi/drivers/amplc_pc263.c
index 191ac0d..0f761c5 100644
--- a/drivers/staging/comedi/drivers/amplc_pc263.c
+++ b/drivers/staging/comedi/drivers/amplc_pc263.c
@@ -50,6 +50,14 @@ The state of the outputs can be read.
 
 #define PC263_DRIVER_NAME	"amplc_pc263"
 
+#ifdef CONFIG_COMEDI_AMPLC_PC263_ISA_MODULE
+#define CONFIG_COMEDI_AMPLC_PC263_ISA
+#endif
+
+#ifdef CONFIG_COMEDI_AMPLC_PC263_PCI_MODULE
+#define CONFIG_COMEDI_AMPLC_PC263_PCI
+#endif
+
 /* PCI263 PCI configuration register information */
 #define PCI_VENDOR_ID_AMPLICON 0x14dc
 #define PCI_DEVICE_ID_AMPLICON_PCI263 0x000c
@@ -73,13 +81,15 @@ struct pc263_board {
 	enum pc263_model model;
 };
 static const struct pc263_board pc263_boards[] = {
+#ifdef CONFIG_COMEDI_AMPLC_PC263_ISA
 	{
 	 .name = "pc263",
 	 .fancy_name = "PC263",
 	 .bustype = isa_bustype,
 	 .model = pc263_model,
 	 },
-#ifdef CONFIG_COMEDI_PCI
+#endif
+#ifdef CONFIG_COMEDI_AMPLC_PC263_PCI
 	{
 	 .name = "pci263",
 	 .fancy_name = "PCI263",
@@ -87,8 +97,6 @@ static const struct pc263_board pc263_boards[] = {
 	 .bustype = pci_bustype,
 	 .model = pci263_model,
 	 },
-#endif
-#ifdef CONFIG_COMEDI_PCI
 	{
 	 .name = PC263_DRIVER_NAME,
 	 .fancy_name = PC263_DRIVER_NAME,
@@ -99,14 +107,14 @@ static const struct pc263_board pc263_boards[] = {
 #endif
 };
 
-#ifdef CONFIG_COMEDI_PCI
+#ifdef CONFIG_COMEDI_AMPLC_PC263_PCI
 static DEFINE_PCI_DEVICE_TABLE(pc263_pci_table) = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_AMPLICON, PCI_DEVICE_ID_AMPLICON_PCI263) },
 	{0}
 };
 
 MODULE_DEVICE_TABLE(pci, pc263_pci_table);
-#endif /* CONFIG_COMEDI_PCI */
+#endif /* CONFIG_COMEDI_AMPLC_PC263_PCI */
 
 /*
  * Useful for shorthand access to the particular board structure
@@ -117,14 +125,14 @@ MODULE_DEVICE_TABLE(pci, pc263_pci_table);
    several hardware drivers keep similar information in this structure,
    feel free to suggest moving the variable to the struct comedi_device struct.
 */
-#ifdef CONFIG_COMEDI_PCI
+#ifdef CONFIG_COMEDI_AMPLC_PC263_PCI
 struct pc263_private {
 	/* PCI device. */
 	struct pci_dev *pci_dev;
 };
 
 #define devpriv ((struct pc263_private *)dev->private)
-#endif /* CONFIG_COMEDI_PCI */
+#endif /* CONFIG_COMEDI_AMPLC_PC263_PCI */
 
 /*
  * The struct comedi_driver structure tells the Comedi core module
@@ -144,8 +152,10 @@ static struct comedi_driver driver_amplc_pc263 = {
 	.num_names = ARRAY_SIZE(pc263_boards),
 };
 
+#ifdef CONFIG_COMEDI_AMPLC_PC263_ISA
 static int pc263_request_region(unsigned minor, unsigned long from,
 				unsigned long extent);
+#endif
 static int pc263_dio_insn_bits(struct comedi_device *dev,
 			       struct comedi_subdevice *s,
 			       struct comedi_insn *insn, unsigned int *data);
@@ -157,7 +167,7 @@ static int pc263_dio_insn_config(struct comedi_device *dev,
  * This function looks for a PCI device matching the requested board name,
  * bus and slot.
  */
-#ifdef CONFIG_COMEDI_PCI
+#ifdef CONFIG_COMEDI_AMPLC_PC263_PCI
 static int
 pc263_find_pci(struct comedi_device *dev, int bus, int slot,
 	       struct pci_dev **pci_dev_p)
@@ -225,7 +235,7 @@ static int pc263_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 {
 	struct comedi_subdevice *s;
 	unsigned long iobase = 0;
-#ifdef CONFIG_COMEDI_PCI
+#ifdef CONFIG_COMEDI_AMPLC_PC263_PCI
 	struct pci_dev *pci_dev = NULL;
 	int bus = 0, slot = 0;
 #endif
@@ -237,7 +247,7 @@ static int pc263_attach(struct comedi_device *dev, struct comedi_devconfig *it)
  * Allocate the private structure area.  alloc_private() is a
  * convenient macro defined in comedidev.h.
  */
-#ifdef CONFIG_COMEDI_PCI
+#ifdef CONFIG_COMEDI_AMPLC_PC263_PCI
 	ret = alloc_private(dev, sizeof(struct pc263_private));
 	if (ret < 0) {
 		printk(KERN_ERR "comedi%d: error! out of memory!\n",
@@ -247,10 +257,12 @@ static int pc263_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 #endif
 	/* Process options. */
 	switch (thisboard->bustype) {
+#ifdef CONFIG_COMEDI_AMPLC_PC263_ISA
 	case isa_bustype:
 		iobase = it->options[0];
 		break;
-#ifdef CONFIG_COMEDI_PCI
+#endif
+#ifdef CONFIG_COMEDI_AMPLC_PC263_PCI
 	case pci_bustype:
 		bus = it->options[0];
 		slot = it->options[1];
@@ -260,7 +272,7 @@ static int pc263_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 			return ret;
 		devpriv->pci_dev = pci_dev;
 		break;
-#endif /* CONFIG_COMEDI_PCI */
+#endif
 	default:
 		printk(KERN_ERR
 		       "comedi%d: %s: BUG! cannot determine board type!\n",
@@ -275,7 +287,7 @@ static int pc263_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 	dev->board_name = thisboard->name;
 
 	/* Enable device and reserve I/O spaces. */
-#ifdef CONFIG_COMEDI_PCI
+#ifdef CONFIG_COMEDI_AMPLC_PC263_PCI
 	if (pci_dev) {
 		ret = comedi_pci_enable(pci_dev, PC263_DRIVER_NAME);
 		if (ret < 0) {
@@ -289,9 +301,11 @@ static int pc263_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 	} else
 #endif
 	{
+#ifdef CONFIG_COMEDI_AMPLC_PC263_ISA
 		ret = pc263_request_region(dev->minor, iobase, PC263_IO_SIZE);
 		if (ret < 0)
 			return ret;
+#endif
 	}
 	dev->iobase = iobase;
 
@@ -322,12 +336,18 @@ static int pc263_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 	s->state = s->state | (inb(dev->iobase) << 8);
 
 	printk(KERN_INFO "comedi%d: %s ", dev->minor, dev->board_name);
-	if (thisboard->bustype == isa_bustype) {
+	switch (thisboard->bustype) {
+#ifdef CONFIG_COMEDI_AMPLC_PC263_ISA
+	case isa_bustype:
 		printk("(base %#lx) ", iobase);
-	} else {
-#ifdef CONFIG_COMEDI_PCI
+		break;
+#endif
+#ifdef CONFIG_COMEDI_AMPLC_PC263_PCI
 		printk("(pci %s) ", pci_name(pci_dev));
+		break;
 #endif
+	default:
+		break;
 	}
 
 	printk("attached\n");
@@ -348,10 +368,11 @@ static int pc263_detach(struct comedi_device *dev)
 	printk(KERN_DEBUG "comedi%d: %s: detach\n", dev->minor,
 	       PC263_DRIVER_NAME);
 
-#ifdef CONFIG_COMEDI_PCI
-	if (devpriv) {
+#ifdef CONFIG_COMEDI_AMPLC_PC263_PCI
+	if (devpriv)
 #endif
-#ifdef CONFIG_COMEDI_PCI
+	{
+#ifdef CONFIG_COMEDI_AMPLC_PC263_PCI
 		if (devpriv->pci_dev) {
 			if (dev->iobase)
 				comedi_pci_disable(devpriv->pci_dev);
@@ -359,8 +380,10 @@ static int pc263_detach(struct comedi_device *dev)
 		} else
 #endif
 		{
+#ifdef CONFIG_COMEDI_AMPLC_PC263_ISA
 			if (dev->iobase)
 				release_region(dev->iobase, PC263_IO_SIZE);
+#endif
 		}
 	}
 	if (dev->board_name) {
@@ -374,6 +397,7 @@ static int pc263_detach(struct comedi_device *dev)
  * This function checks and requests an I/O region, reporting an error
  * if there is a conflict.
  */
+#ifdef CONFIG_COMEDI_AMPLC_PC263_ISA
 static int pc263_request_region(unsigned minor, unsigned long from,
 				unsigned long extent)
 {
@@ -384,6 +408,7 @@ static int pc263_request_region(unsigned minor, unsigned long from,
 	}
 	return 0;
 }
+#endif
 
 /* DIO devices are slightly special.  Although it is possible to
  * implement the insn_read/insn_write interface, it is much more
@@ -429,7 +454,7 @@ static int pc263_dio_insn_config(struct comedi_device *dev,
  * A convenient macro that defines init_module() and cleanup_module(),
  * as necessary.
  */
-#ifdef CONFIG_COMEDI_PCI
+#ifdef CONFIG_COMEDI_AMPLC_PC263_PCI
 static int __devinit driver_amplc_pc263_pci_probe(struct pci_dev *dev,
 						  const struct pci_device_id
 						  *ent)
-- 
1.7.8.5

_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/devel


[Video for Linux]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Photos]     [Yosemite Photos]     [Free Singles Community]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Devices]     [Yosemite Backpacking]

Add to Google Powered by Linux