Re: [PATCH v4] hwmon: Driver for TI TMP103 temperature sensor

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 06/17/2014 04:01 AM, Heiko Schocher wrote:
Hello Guenter

Am 17.06.2014 12:48, schrieb Guenter Roeck:
On 06/17/2014 01:11 AM, Heiko Schocher wrote:
Driver for the TI TMP103.

The TI TMP103 is similar to the TMP102. It differs from the TMP102
by having only 8 bit registers.

Signed-off-by: Heiko Schocher <hs@xxxxxxx>

[ ... ]
+#define TMP103_CONF_SD (TMP103_CONF_M0 | TMP103_CONF_M1)

Hello Heiko,

I thought this needs to be TMP103_CONF_M1, but from the datasheet it looks
like it does not matter if M0 is set if M1 is set as well. Did you test it,
though, to make sure that it works ? I feel slightly uncomfortable with it.

Yes, i tested it on an imx6 based board. I see no issues ... but I can
test it with "#define TMP103_CONF_SD TMP103_CONF_M1" and post a v5 with
this setting if it works ...


Hello Heiko,

I would appreciate that.

Thanks,
Guenter


--
To unsubscribe from this list: send the line "unsubscribe linux-doc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux FS]     [Yosemite Forum]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux