Re: [RFC PATCH 02/12] pci: host: pcie-dra7xx: add support for pcie-dra7xx controller

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wednesday, March 26, 2014 10:58 PM, Kishon Vijay Abraham I wrote:
> 
> Added support for pcie controller in dra7xx. This driver re-uses
> the designware core code that is already present in kernel.
> 
> Signed-off-by: Kishon Vijay Abraham I <kishon@xxxxxx>

Hi Kishon,
Long time no see! I added trivial comments.

> ---
>  Documentation/devicetree/bindings/pci/ti-pci.txt |   35 ++
>  drivers/pci/host/Kconfig                         |   10 +
>  drivers/pci/host/Makefile                        |    1 +
>  drivers/pci/host/pcie-dra7xx.c                   |  411 ++++++++++++++++++++++

How about using 'pci-' prefix?
As it was discussed earlier, 'pci-' prefix is more proper.

>  4 files changed, 457 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/pci/ti-pci.txt
>  create mode 100644 drivers/pci/host/pcie-dra7xx.c

[.....]

> --- /dev/null
> +++ b/drivers/pci/host/pcie-dra7xx.c

[.....]

> +#define	PCIECTRL_TI_CONF_IRQSTATUS_MAIN		0x0024
> +#define	PCIECTRL_TI_CONF_IRQENABLE_SET_MAIN	0x0028

I don't think that it's good to add vendor names such as TI
to SFR names.

How about adding 'DRA7XX' or just removing 'TI'?

1. PCIECTRL_DRA7XX_CONF_IRQSTATUS_MAIN

2. PCIECTRL_CONF_IRQSTATUS_MAIN

[.....]

> +enum dra7xx_pcie_device_type {
> +	DRA7XX_PCIE_UNKNOWN_TYPE,
> +	DRA7XX_PCIE_EP_TYPE,
> +	DRA7XX_PCIE_LEG_EP_TYPE,
> +	DRA7XX_PCIE_RC_TYPE,
> +};

This driver can support only RC mode, so, these enum can be removed.

[.....]

> +	of_property_read_u32(node, "ti,device-type", &device_type);
> +	switch (device_type) {
> +	case DRA7XX_PCIE_RC_TYPE:
> +		dra7xx_pcie_writel(dra7xx->base,
> +			PCIECTRL_TI_CONF_DEVICE_TYPE, DEVICE_TYPE_RC);
> +		break;
> +	case DRA7XX_PCIE_EP_TYPE:
> +		dra7xx_pcie_writel(dra7xx->base,
> +			PCIECTRL_TI_CONF_DEVICE_TYPE, DEVICE_TYPE_EP);
> +		break;
> +	case DRA7XX_PCIE_LEG_EP_TYPE:
> +		dra7xx_pcie_writel(dra7xx->base,
> +			PCIECTRL_TI_CONF_DEVICE_TYPE, DEVICE_TYPE_LEG_EP);
> +		break;
> +	default:
> +		dev_dbg(dev, "UNKNOWN device type %d\n", device_type);
> +	}

Thus, this switch can be removed.
Others look good.

Best regards,
Jingoo Han

--
To unsubscribe from this list: send the line "unsubscribe linux-doc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux FS]     [Yosemite Forum]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux