[PATCH 01/13] Heart Rate Profile API

[Rafal Garbat <rafal.garbat@xxxxxxxxx>]

From: Santiago Carot-Nemesio <sancane@xxxxxxxxx>

---
 doc/heartrate-api.txt |   74 +++++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 74 insertions(+)
 create mode 100644 doc/heartrate-api.txt

diff --git a/doc/heartrate-api.txt b/doc/heartrate-api.txt
new file mode 100644
index 0000000..2738e20
--- /dev/null
+++ b/doc/heartrate-api.txt
@@ -0,0 +1,74 @@
+BlueZ D-Bus Heart Rate API description
+****************************************
+
+Copyright (C) 2012	Santiago Carot-Nemesio <sancane@xxxxxxxxx>
+
+Heart Rate Profile hierarchy
+============================
+
+Service		org.bluez
+Interface	org.bluez.HeartRate
+Object path	[variable prefix]/{hci0,hci1,...}/dev_XX_XX_XX_XX_XX_XX
+
+Methods		dict GetProperties()
+
+			Returns all properties for the interface. See the
+			Properties section for the available properties.
+
+		RegisterWatcher(object agent)
+
+			Registers a watcher to monitor heart rate measurements.
+
+			Possible Errors: org.bluez.Error.InvalidArguments
+
+		UnregisterWatcher(object agent)
+
+			Unregisters a watcher.
+
+			Possible Errors: org.bluez.Error.InvalidArguments
+					org.bluez.Error.NotFound
+
+		Reset()
+
+			Restart the accumulation of energy expended from zero.
+
+			Possible Errors: org.bluez.Error.NotSupported
+
+Properties	boolean ResetSupported [readonly]
+
+			True if energy expended is supported.
+
+Heart Rate Watcher hierarchy
+
+============================
+Service		unique name
+Interface	org.bluez.HeartRateWatcher
+Object path	freely definable
+
+Methods		void MeasurementReceived(dict measure)
+
+			This callback is called whenever a heart rate
+			measurement is received from the heart rate device.
+			The unit for the Value is expressed in beats per
+			minute (bpm). The energy field is optional and
+			represents the accumulated energy expended in
+			kilo Joules since last time it was reset. Furthermore,
+			the device will be automatically reset when it
+			is needed.
+			The Contact field, if present, indicates
+			that the device supports contact sensor, besides it
+			will be true if skin contact is detected. The optional
+			interval field is an array containing RR-Interval
+			values which represent the time between two R-Wave
+			detections, where the RR-Interval value 0 is older
+			than the value 1 and so on.
+
+			Dict is defined as below:
+			{
+				"Value" : uint16,
+				"Energy" : uint16,
+				"Contact" : boolean,
+				"Location" : ("Other", "Chest", "Wrist","Finger",
+					"Hand", "Earlobe", "Foot"),
+				"Interval" : array{uint16}
+			}
-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe linux-bluetooth" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html