Re: Formatting of backing device

[Piergiorgio Sartor <piergiorgio.sartor@xxxxxxxx>]

Hi Adam,

thanks for the answer, see below.

On Wed, Feb 01, 2012 at 11:04:59AM -0800, Adam Berkan wrote:
> You can attach bcache to a drive with an existing file system, and it will
> continue as normal.  If you connect to a drive without a file system, then
> it will continue to not have a file system, but you can format it while
> attached.

Maybe I misused the term "format".

I did not mean filesystem format, but bcache format.

What I understood, maybe I'm wrong, is that the backing
device, before being used, must be "initialized" with
the bcache tool.

>From the docs:

Getting started:
You'll need make-bcache from the bcache-tools repository. Both the cache device
and backing device must be formatted before use.
  make-bcache -B /dev/sdb
  make-bcache -C -w2k -b1M -j64 /dev/sdc

I understand this as the backing device gets something
on written on it (note the term "formatted").

Am I wrong? I hope so...

Thanks again,

bye,

pg

> Attach/detach should work while the device is in use.  This isn't the most
> tested code path, especially with writeback on, but it's supposed to work.
>  Detaching while the cache is dirty requires flushing all that data so
> performance will be bad until the detach completes.
> 
> Let us know if you find any bugs.
> Adam
> 
> On Wed, Feb 1, 2012 at 2:10 AM, Piergiorgio Sartor <
> piergiorgio.sartor@xxxxxxxx> wrote:
> 
> > Hi all,
> >
> > first of all I would like to congratulate for this
> > project, I think it is one of the most promising
> > feature the Linux kernel can have.
> >
> > Wrote that, I've a question about the concept of
> > formatting the backing device.
> >
> > As far as I understood, the first concept of bcache
> > was to simply "register" or "attach" a cache to a
> > backing device, that is, the backing device had not
> > to be formatted.
> >
> > Lately, still if I understood it correctly, this
> > behaviour was changed and, now, the backing device
> > needs to be formatted.
> >
> > So, the question is:
> >
> > How about an already running device? Is it still
> > possible to attach a cache under such situation?
> >
> > In general, would it be possible to attach/detach
> > a cache to any already available device (in the
> > future)? Or the caching/backing setup must be planned
> > before the HW is available, so to speak?
> >
> > It would be useful (and cool too), to have the
> > possibility to attach/detach the SSD cache, on
> > the fly (at run-time) to any device it needs it.
> >
> > I hope the question(s) are clear, if not please
> > let me know.
> >
> > Thanks a lot in advance,
> >
> > bye,
> >
> > --
> >
> > piergiorgio
> > --
> > To unsubscribe from this list: send the line "unsubscribe linux-bcache" in
> > the body of a message to majordomo@xxxxxxxxxxxxxxx
> > More majordomo info at  http://vger.kernel.org/majordomo-info.html
> >

-- 

piergiorgio
--
To unsubscribe from this list: send the line "unsubscribe linux-bcache" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html