Hello all.I havent had to post anything to such a wide variety of knowledegable people before so forgive me if I have broken any etiquette, but I have a pretty big problem.
I recently spent a big wad of cash building a rig based on the GA-Z68AP-D3 motherboard. I built it primarily for audio production on linux using my Maudio Delta 66 Rev B sound card. The card works fine when no graphics card is installed but as soon as I install my NVIDIA 7900GTO card in the PCIex16 slot - alsa fails to see the soundcard. All I get listed in aplay -l is my onboard sound or, if I switch off onboard sound, no cards listed.
I have been on the Ubuntu Studio forums (this is the main OS I use for Audio) but have been unable to get a solution.
I have tried a few options. I have tried the 3 series kernel from upstream but that didnt help. I have tried installing the proprietary driver for th NVIDIA card which has allowed use of Message Signalled Interrupts but that has not helped. I have updated the BIOS version to the current one from the manufacturers website. I am also on my second motherboard as the first one was returned due to a defect.
I have also tested the sound card and graphics card on a friends Asus P8Z68 Deluxe motherboard. The soundcard is detected from a live CD with both my NVIDIA card installed and my friends ATI card. So it appears not to be an issue of defective card.
I have also tested the set up with Ubuntu 11.10 and AV Linux. They have the same basis so no difference.
I am pretty much out of options at this point. I dont know what to do. Using the system with just the ondboard graphics is not ideal as the Mobo only has HDMI out - which means I would need to buy a new monitor as mine doesnt support HDMI.
Below is some useful output ric@Ric:~$ aplay -l **** List of PLAYBACK Hardware Devices **** card 0: PCH [HDA Intel PCH], device 0: ALC889 Analog [ALC889 Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: PCH [HDA Intel PCH], device 1: ALC889 Digital [ALC889 Digital] Subdevices: 1/1 Subdevice #0: subdevice #0 ric@Ric:~$ lspci -vvv 00:00.0 Host bridge: Intel Corporation Device 0100 (rev 09)Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0 Capabilities: <access denied>00:01.0 PCI bridge: Intel Corporation Sandy Bridge PCI Express Root Port (rev 09) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 4 bytes Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 0000c000-0000cfff Memory behind bridge: f8000000-faffffff Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffffSecondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport Kernel modules: shpchp 00:02.0 Display controller: Intel Corporation Device 0112 (rev 09) Subsystem: Giga-byte Technology Device d000Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 Interrupt: pin A routed to IRQ 12 Region 0: Memory at fb800000 (64-bit, non-prefetchable) [size=4M] Region 2: Memory at e0000000 (64-bit, prefetchable) [size=256M] Region 4: I/O ports at ff00 [size=64] Capabilities: <access denied>00:16.0 Communication controller: Intel Corporation Cougar Point HECI Controller #1 (rev 04)
Subsystem: Giga-byte Technology Device 1c3aControl: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 Interrupt: pin A routed to IRQ 12 Region 0: Memory at fbfff000 (64-bit, non-prefetchable) [size=16] Capabilities: <access denied>00:1a.0 USB Controller: Intel Corporation Cougar Point USB Enhanced Host Controller #2 (rev 05) (prog-if 20)
Subsystem: Giga-byte Technology Device 5006Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 Interrupt: pin C routed to IRQ 18 Region 0: Memory at fbffe000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd00:1b.0 Audio device: Intel Corporation Cougar Point High Definition Audio Controller (rev 05)
Subsystem: Giga-byte Technology Device a002Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 4 bytes Interrupt: pin A routed to IRQ 22 Region 0: Memory at fbff8000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: HDA Intel Kernel modules: snd-hda-intel00:1c.0 PCI bridge: Intel Corporation Cougar Point PCI Express Root Port 1 (rev b5) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 4 bytes Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 00002000-00002fff Memory behind bridge: cc000000-cc1fffff Prefetchable memory behind bridge: 00000000cc200000-00000000cc3fffffSecondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport Kernel modules: shpchp00:1c.1 PCI bridge: Intel Corporation Cougar Point PCI Express Root Port 2 (rev b5) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 4 bytes Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 I/O behind bridge: 0000f000-00000fff Memory behind bridge: fbe00000-fbefffff Prefetchable memory behind bridge: 00000000fff00000-00000000000fffffSecondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport Kernel modules: shpchp00:1c.2 PCI bridge: Intel Corporation Cougar Point PCI Express Root Port 3 (rev b5) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 4 bytes Bus: primary=00, secondary=04, subordinate=04, sec-latency=0 I/O behind bridge: 0000e000-0000efff Memory behind bridge: fff00000-000fffff Prefetchable memory behind bridge: 00000000fbd00000-00000000fbdfffffSecondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport Kernel modules: shpchp 00:1c.3 PCI bridge: Intel Corporation 82801 PCI Bridge (rev b5) (prog-if 01)Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 4 bytes Bus: primary=00, secondary=05, subordinate=06, sec-latency=0 I/O behind bridge: 0000d000-0000dfff Memory behind bridge: fff00000-000fffff Prefetchable memory behind bridge: 00000000fff00000-00000000000fffffSecondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied>00:1d.0 USB Controller: Intel Corporation Cougar Point USB Enhanced Host Controller #1 (rev 05) (prog-if 20)
Subsystem: Giga-byte Technology Device 5006Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 Interrupt: pin A routed to IRQ 23 Region 0: Memory at fbffd000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:1f.0 ISA bridge: Intel Corporation Device 1c44 (rev 05) Subsystem: Giga-byte Technology Device 5001Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 Capabilities: <access denied> Kernel modules: iTCO_wdt00:1f.2 IDE interface: Intel Corporation Cougar Point 4 port SATA IDE Controller (rev 05) (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: Giga-byte Technology Device b002Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 Interrupt: pin B routed to IRQ 19 Region 0: I/O ports at fe00 [size=8] Region 1: I/O ports at fd00 [size=4] Region 2: I/O ports at fc00 [size=8] Region 3: I/O ports at fb00 [size=4] Region 4: I/O ports at fa00 [size=16] Region 5: I/O ports at f900 [size=16] Capabilities: <access denied> Kernel driver in use: ata_piix 00:1f.3 SMBus: Intel Corporation Cougar Point SMBus Controller (rev 05) Subsystem: Giga-byte Technology Device 5001Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 10 Region 0: Memory at fbffc000 (64-bit, non-prefetchable) [size=256] Region 4: I/O ports at 0500 [size=32] Kernel modules: i2c-i80100:1f.5 IDE interface: Intel Corporation Cougar Point 2 port SATA IDE Controller (rev 05) (prog-if 85 [Master SecO PriO])
Subsystem: Giga-byte Technology Device b002Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 Interrupt: pin B routed to IRQ 19 Region 0: I/O ports at f700 [size=8] Region 1: I/O ports at f600 [size=4] Region 2: I/O ports at f500 [size=8] Region 3: I/O ports at f400 [size=4] Region 4: I/O ports at f300 [size=16] Region 5: I/O ports at f200 [size=16] Capabilities: <access denied> Kernel driver in use: ata_piix01:00.0 VGA compatible controller: nVidia Corporation G71 [GeForce 7900 GT/GTO] (rev a1)
Subsystem: nVidia Corporation Device 042bControl: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 Interrupt: pin A routed to IRQ 29 Region 0: Memory at f8000000 (32-bit, non-prefetchable) [size=16M] Region 1: Memory at d0000000 (64-bit, prefetchable) [size=256M] Region 3: Memory at f9000000 (64-bit, non-prefetchable) [size=16M] Region 5: I/O ports at cf00 [size=128] [virtual] Expansion ROM at fa000000 [disabled] [size=128K] Capabilities: <access denied> Kernel driver in use: nvidia Kernel modules: nvidia, nvidiafb, nouveau 03:00.0 USB Controller: Device 1b6f:7023 (rev 01) (prog-if 30) Subsystem: Giga-byte Technology Device 5007Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 17 Region 0: Memory at fbef8000 (64-bit, non-prefetchable) [size=32K] Capabilities: <access denied> Kernel driver in use: xhci_hcd Kernel modules: xhci04:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06)
Subsystem: Giga-byte Technology Device e000Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 28 Region 0: I/O ports at ee00 [size=256] Region 2: Memory at fbdff000 (64-bit, prefetchable) [size=4K] Region 4: Memory at fbdf8000 (64-bit, prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: r8168 Kernel modules: r816805:00.0 PCI bridge: Integrated Technology Express, Inc. Device 8892 (rev 30) (prog-if 01) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 4 bytes Bus: primary=05, secondary=06, subordinate=06, sec-latency=32 I/O behind bridge: 0000d000-0000dfff Memory behind bridge: fff00000-000fffff Prefetchable memory behind bridge: 00000000fff00000-00000000000fffffSecondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr+ DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied>06:00.0 Multimedia audio controller: VIA Technologies Inc. ICE1712 [Envy24] PCI Multi-Channel I/O Controller (rev 02)
Subsystem: VIA Technologies Inc. Device d632Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 19
Region 0: I/O ports at dfc0 [size=32]
Region 1: I/O ports at dff0 [size=16]
Region 2: I/O ports at dfe0 [size=16]
Region 3: I/O ports at df80 [size=64]
Capabilities: <access denied>
Kernel modules: snd-ice1712
ric@Ric:~$ cat /proc/interrupts
CPU0 CPU1 CPU2 CPU3
0: 126 0 0 0 IO-APIC-edge timer
1: 31 0 259 18 IO-APIC-edge i8042
4: 2 0 0 0 IO-APIC-edge
7: 0 0 0 0 IO-APIC-edge
parport0
8: 1 0 0 0 IO-APIC-edge rtc0 9: 0 0 0 0 IO-APIC-fasteoi acpi17: 0 0 0 0 IO-APIC-fasteoi xhci_hcd:usb3 18: 244 0 0 3558 IO-APIC-fasteoi ehci_hcd:usb1 19: 8779 0 0 0 IO-APIC-fasteoi ata_piix, ata_piix 22: 732 0 779 0 IO-APIC-fasteoi HDA Intel 23: 1206 0 0 0 IO-APIC-fasteoi ehci_hcd:usb2
29: 651 10818 0 0 PCI-MSI-edge nvidia NMI: 0 0 0 0 Non-maskable interrupts LOC: 21411 21545 9745 7132 Local timer interrupts SPU: 0 0 0 0 Spurious interruptsPMI: 0 0 0 0 Performance monitoring interrupts
PND: 0 0 0 0 Performance pending work
RES: 290 381 302 269 Rescheduling interrupts
CAL: 80 148 153 155 Function call interrupts
TLB: 234 380 323 277 TLB shootdowns
TRM: 0 0 0 0 Thermal event interrupts
THR: 0 0 0 0 Threshold APIC interrupts
MCE: 0 0 0 0 Machine check exceptions
MCP: 2 2 2 2 Machine check polls
ERR: 0
MIS: 0
ric@Ric:~$ cat /proc/asound/cards
0 [PCH ]: HDA-Intel - HDA Intel PCH
HDA Intel PCH at 0xfbff8000 irq 22
ric@Ric:~$ uname -r
2.6.32-38-preempt
ric@Ric:~$ cat /proc/asound/version
Advanced Linux Sound Architecture Driver Version 1.0.21.
Again I apologise if this is the wrong place to post this but I am now
pretty desperate.
Any help will be gratefully received. Many Thanks _______________________________________________ Linux-audio-user mailing list Linux-audio-user@xxxxxxxxxxxxxxxxxxxx http://lists.linuxaudio.org/listinfo/linux-audio-user
[ALSA Users] [ALSA Devel] [Linux Media] [Kernel] [Online Dating] [Photo Sharing] [Gimp] [Yosemite News] [Video 4 Linux]
|
|