[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Hi,
On Tue, Mar 06 2012, Girish K S wrote:
> On 6 March 2012 17:59, Subhash Jadavani <subhashj@xxxxxxxxxxxxxx> wrote:
>> This patch fixes following issues when HS200 is enabled:
>>
>> 1. If executing_tuning() host ops is called without mmc_host_clk_hold(),
>> card clocks might get turned off (if MMC_CLK_GATING is enabled)
>> while execute_tuning() is in progress. So this patch makes sure
>> that execute_tuning() is called with mmc_host_clk_hold().
>>
>> 2. If host timing mode is set to HS200 mode, there should not be
>> any communication with the card until execute_tuning() is completed.
>> But there is a chance that CMD6 might be sent to enable set HPI_EN
>> (of HPI_MGMT field in EXT_CSD) before execute_tuning() is called.
>> So this patch moves this operation after execute_tuning() is completed.
>>
>> Signed-off-by: Subhash Jadavani <subhashj@xxxxxxxxxxxxxx>
>> ---
>> drivers/mmc/core/mmc.c | 38 +++++++++++++++++++++-----------------
>> 1 files changed, 21 insertions(+), 17 deletions(-)
>>
>> diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c
>> index a480663..d36d2c4 100644
>> --- a/drivers/mmc/core/mmc.c
>> +++ b/drivers/mmc/core/mmc.c
>> @@ -1030,22 +1030,6 @@ static int mmc_init_card(struct mmc_host
>> *host, u32 ocr,
>> }
>>
>> /*
>> - * Enable HPI feature (if supported)
>> - */
>> - if (card->ext_csd.hpi) {
>> - err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
>> - EXT_CSD_HPI_MGMT, 1, 0);
>> - if (err && err != -EBADMSG)
>> - goto free_card;
>> - if (err) {
>> - pr_warning("%s: Enabling HPI failed\n",
>> - mmc_hostname(card->host));
>> - err = 0;
>> - } else
>> - card->ext_csd.hpi_en = 1;
>> - }
>> -
>> - /*
>> * Compute bus speed.
>> */
>> max_dtr = (unsigned int)-1;
>> @@ -1094,9 +1078,12 @@ static int mmc_init_card(struct mmc_host
>> *host, u32 ocr,
>> * 4. execute tuning for HS200
>> */
>> if ((host->caps2 & MMC_CAP2_HS200) &&
>> - card->host->ops->execute_tuning)
>> + card->host->ops->execute_tuning) {
>> + mmc_host_clk_hold(card->host);
>> err = card->host->ops->execute_tuning(card->host,
>> MMC_SEND_TUNING_BLOCK_HS200);
>> + mmc_host_clk_release(card->host);
>> + }
>> if (err) {
>> pr_warning("%s: tuning execution failed\n",
>> mmc_hostname(card->host));
>> @@ -1216,6 +1203,23 @@ static int mmc_init_card(struct mmc_host
>> *host, u32 ocr,
>> }
>>
>> /*
>> + * Enable HPI feature (if supported)
>> + */
>> + if (card->ext_csd.hpi) {
>> + err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
>> + EXT_CSD_HPI_MGMT, 1,
>> + card->ext_csd.generic_cmd6_time);
>> + if (err && err != -EBADMSG)
>> + goto free_card;
>> + if (err) {
>> + pr_warning("%s: Enabling HPI failed\n",
>> + mmc_hostname(card->host));
>> + err = 0;
>> + } else
>> + card->ext_csd.hpi_en = 1;
>> + }
>> +
>> + /*
>> * If cache size is higher than 0, this indicates
>> * the existence of cache and it can be turned on.
>> */
>
> Reviewed-By: girish.shivananjappa@xxxxxxxxxx
Thanks, pushed to mmc-next for 3.4.
- Chris.
--
Chris Ball <cjb@xxxxxxxxxx> <http://printf.net/>
One Laptop Per Child
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
|