Strange rtraceroute behaviour.

[Toby Fisher <toby@xxxxxxxxxxxxxx>]

Hi all.

I have something very strange going on with Traceroute.

I have 3 ethernet interfaces, all to internal networks, eth0 eth1 and 
eth2, and ppp0 which is the interface for my pci dsl modem card.  However, 
traceroute will, unless I give it the -i switch, always usse eth0 to try 
and do a trace.  The rest of the network seems to work fine i.e. other 
programs know where their packets should be going.

My routing table i below.

Any Thoughts?

Thanks in advance.

Kernel IP routing table
Destination     Gateway         Genmask         Flags Metric Ref    Use 
Iface
lo1.plusnet.pth *               255.255.255.255 UH    0      0        0 
ppp0
192.168.3.0     *               255.255.255.0   U     0      0        0 
eth2
192.168.2.0     *               255.255.255.0   U     0      0        0 
eth1
192.168.1.0     *               255.255.255.0   U     0      0        0 
eth0
loopback        localhost       255.0.0.0       UG    0      0        0 lo
default         lo1.plusnet.pth 0.0.0.0         UG    0      0        0 
ppp0


--
Toby Fisher	Email: toby@xxxxxxxxxxxxxx
Tel.: +44(0)1480 417272	Mobile: +44(0)7974 363239
ICQ: #61744808
-
: send the line "unsubscribe linux-admin" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html