Re: [RFC PATCH] PCIe: Add PCIe runtime D3cold support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

On Wed, Apr 18, 2012 at 4:43 AM, Rafael J. Wysocki <rjw@xxxxxxx> wrote:
> On Tuesday, April 17, 2012, huang ying wrote:
>> On Tue, Apr 17, 2012 at 10:12 AM, Yan, Zheng <zheng.z.yan@xxxxxxxxx> wrote:
>> > On 04/17/2012 01:07 AM, Rafael J. Wysocki wrote:
>> >
>> >> BTW, can you please explain to me what the #WAKE signal is and how it is
>> >> different from PME#?
>> >
>> > #WAKE signal is triggered by a pin connected to the root complex or other
>> > motherboard logic. PME# is triggered by PME message sent to the port.
>> PME# is a PCI pin, while WAKE# is a PCI Express pin.  In PCI Express,
>> there is no PME#, PME is delivered between end point device and root
>> port or root complex event collector via PME message, and the PME
>> message will trigger IRQ on root port or root complex event collector.
>>  WAKE# is not used for PCI Express D1, D2 and D3hot, it is just used
>> by D3cold.  When remote wakeup detected by end point device, it will
>> assert WAKE# to notify power controller (implemented via ACPI on some
>> platform), then power controller will turn on power for main link,
>> after link goes back to L0, PME message will be sent to root port or
>> root complex event collector by end point device.
> OK
> So do I understand correctly that the WAKE# signal here is the one described
> in Section Link Wakeup of PCI Express Base spec. 2.0?
> So what happens is that it triggers a GPE and that GPE has a _Lxx method
> associated with it, I suppose.  Is that correct?


Best Regards,
Huang Ying
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at

[Site Home]     [Linux IBM ACPI]     [Linux Power Management]     [Linux Kernel]     [Linux Laptop]     [Kernel Newbies]     [Share Photos]     [Security]     [Netfilter]     [Bugtraq]     [Rubini]     [Photo]     [Yosemite Photos]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux