Re: Name: Juzer Golwala, Country:Saudi Arabia, Ubuntu Kernel: 2.6.32-54-generic

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Juzer,

While the mentioned Martian drivers will in principle  support your
modem in:  PCI bridge slot 00:0b.0
   0780 Communication controller: Agere Systems LT WinModem
      Primary device ID:  11c1:044c

there is a functional barrier which cannot easily be overcome:
----------
 Modem interrupt assignment and sharing:
 15:    3713133          0   IO-APIC-edge      pata_sis
 --- Bootup diagnostics for card in PCI slot 00:0b.0 ----
[    0.234109] pci 0000:00:0b.0: reg 10 32bit mmio: [0xe1106000-0xe11060ff]
[    0.234122] pci 0000:00:0b.0: reg 14 io port: [0xe000-0xe007]
[    0.234134] pci 0000:00:0b.0: reg 18 io port:
[0xe400-0xe4ff]
[    0.234197] pci 0000:00:0b.0: supports D2
[    0.234202] pci 0000:00:0b.0: PME# supported from D2 D3hot D3cold
[    0.234209] pci 0000:00:0b.0: PME# disabled
-----------
relates that acquisition of serving attention through "interrupt 15"
is shared with functionalities of
O-APIC-edge   and   pata_sis
These have been given such higher priority under the bootup kernel,
that service of the PCI slot has been disabled, as reported by:
 0.234209] pci 0000:00:0b.0: PME# disabled

On your particular PC, there is no particular fix for this problem.
It is in part due to the fact that the modem (though excellent in its
youth is now a few developental phases old.)

Your best option for attained robust Internet service is though
1) a wired etherent connection
2) a wireless connection to some Router, as is commonly available
either as an at home unit or in Coffee shops etc.

You could get local Linux advice through:
http://www.linkedin.com/groups/LUG-SA-Linux-User-Group-4631798

MarvS
scanModem
maintainer

On Wed, Jan 1, 2014 at 11:51 AM, Juzer Golwala <jgolwala@xxxxxxxxx> wrote:
> I am a newbie trying to configure my Winmodem for Ubuntu 10.04 LTS and request your help to get it working.
>
> The ModemData.txt file content is pasted below.  My country (Saudi Arabia) code is +966.
>
> Your help will be greatly appreciated.
>
> Regards.
> Juzer
> --------------------------  System information ----------------------------
> CPU=i686,  Ubuntu ,  ALSA_version=1.0.21
> Linux version 2.6.32-54-generic (buildd@lamiak) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5.1) ) #116-Ubuntu SMP Tue Nov 12 19:27:09 UTC 2013
>  scanModem update of:  2011_08_08
>
> Distrib_ID=Ubuntu
> DistribCodeName=lucid
> AptRepositoryStem=http://us.archive.ubuntu.com/ubuntu/
>
> Presently install your Linux Distributions dkms package. It provides for
> automated driver updates,
> following upgrade of your kernel.  For details see http://linux.dell.com/projects.shtml#dkms
>
>  There are no blacklisted modem drivers in /etc/modprobe*  files
>
>  Potentially useful modem drivers now loaded are:
>
> Attached USB devices are:
>  ID 045e:00f6 Microsoft Corp.
>  ID 0c45:613b Microdia Win2 PC Camera
> If a cellphone is not detected, see http://ubuntuforums.org/archive/index.php/t-878554.html
> A sample report is:  http://linmodems.technion.ac.il/bigarch/archive-nineth/msg00578.html
>
> If a USB modem or cellphone is attached and was not detected, please
> provide available information in your request to discuss@xxxxxxxxxxxxx
>
> Candidate PCI devices with modem chips are:
> 00:0b.0 Communication controller: Agere Systems LT WinModem (rev 02)
> High Definition Audio cards can host modem chips.
>
> For candidate card in slot 00:0b.0, firmware
> information and bootup diagnostics are:
>  PCI slot    PCI ID        SubsystemID    Name
>  ----------    ---------    ---------    --------------
>  00:0b.0    11c1:044c    11c1:044c    Communication controller: Agere Systems LT WinModem
>
>  Modem interrupt assignment and sharing:
>  15:    3713133          0   IO-APIC-edge      pata_sis
>  --- Bootup diagnostics for card in PCI slot 00:0b.0 ----
> [    0.234109] pci 0000:00:0b.0: reg 10 32bit mmio: [0xe1106000-0xe11060ff]
> [    0.234122] pci 0000:00:0b.0: reg 14 io port: [0xe000-0xe007]
> [    0.234134] pci 0000:00:0b.0: reg 18 io port:
> [0xe400-0xe4ff]
> [    0.234197] pci 0000:00:0b.0: supports D2
> [    0.234202] pci 0000:00:0b.0: PME# supported from D2 D3hot D3cold
> [    0.234209] pci 0000:00:0b.0: PME# disabled
>
>  The PCI slot 00:0b.0 of the modem card may be disabled early in
>  a bootup process,  but then enabled later. If modem drivers load
>  but the  modem is not responsive, read DOCs/Bootup.txt about possible fixes.
>  Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx
>  if help is needed.
>
> === Finished firmware and bootup diagnostics, next deducing cogent software. ===
>
> Predictive  diagnostics for card in bus 00:0b.0:
>     Modem chipset  detected on
> NAME="Communication controller: Agere Systems LT WinModem "
> CLASS=0780
> PCIDEV=11c1:044c
> SUBSYS=11c1:044c
> IRQ=5
> IDENT=Agere.DSP
>
>  For candidate
> modem in:  00:0b.0
>    0780 Communication controller: Agere Systems LT WinModem
>       Primary device ID:  11c1:044c
>  Support type needed or chipset:    Agere.DSP
>
>  The modem has a Lucent/Agere/LSI Mars or Apollo DSP (digital signal processing) chipset.
> Support packages for 2.6.n kernels are at:
>  http://linmodems.technion.ac.il/packages/ltmodem/kernel-2.6/martian/
>  http://packages.debian.org/sid/martian-modem-source/
> Always use the most update for kernels after 2.6.20, currently martian-full-20080625.tar.gz
> For kernels 2.6.20 and less, usr martian-full-20080407.tar.gz.
> There are corresponding packages for the Ubuntu distribution:
> martian-modem - ltmodem alternative driver providing support for Agere WinModem
> martian-modem-source - Source for the martian-modem driver
>
>  See DOCs/AgereDSP.txt for Details.
>
>  At
> http://linmodems.technion.ac.il/packages/ltmodem/kernel-2.6/martian/ get the martian-full-20080625.tar.gz and follow Readme-NOW.html
>  0x044c -- Mars 3 Perseus data/fax only:North America and Global board
>  0x044c -- Mars 3.2 Mercury data fax only when no eeprom is present, North America DAA
> -------------- end Agere Systems section -------------------
>
>  Completed candidate modem analyses.
>
>  The base of the UDEV device file system is: /dev/.udev
>
>  Versions adequately match for the compiler installed: 4.4.3
>              and the compiler used in kernel assembly: 4.4.3
>
>  Minimal compiling resources appear complete:
>    make utility - /usr/bin/make
>    Compiler version 4.4
>    linuc_headers base folder /lib/modules/2.6.32-54-generic/build
>
>  However some compilations and executable
> functions may need additional files,
>  in the FileNames.h (so called kernel "h"eaders) collection installed in  /usr/include/ .
>  For martian_modem, additional required packages are needed. The also required headers of package libc6 are commonly installed by default.
>  Compiling hsfmodem drivers does require linux-libc-dev and libc6-dev packages, for kernels 2.6.24 and later versions.
>  In not included on your install CD, search for them at http://packages.ubuntu.com
>  or comparable Repository for other Linux distros.
>  When compiling ALSA drivers, the utility "patch" will also be needed.
>
> If a driver compilation fails, with message including some lack of some FileName.h (stdio.h for example), then
> Some additional kernel-header files need installation to /usr/include. The minimal additional packages are libc6-dev
> and any of its dependents, under Ubuntu linux-libc-dev
>
> If an alternate
> ethernet connection is available,
> $  apt-get update
> $  apt-get -s install linux-kernel-devel
> will install needed packages.
> For Debian/Ubuntu related distributions, run the following command to display the needed package list:
>
> Otherwise packages have to be found through http://packages.ubuntu.com
> Once downloaded and transferred into a Linux partition,
> they can be installed alltogether with:
> $ sudo dpkg -i *.deb
>
> Checking pppd properties:
>     -rwsr-xr-- 1 root dip 273312 2010-03-07 06:59 /usr/sbin/pppd
>
> In case of an "error 17" "serial loopback" problem, see:
>     http://linmodems.technion.ac.il/linmodems/archive-sixth/msg02637.html
>
> To enable dialout without Root permission do:
>     $ su - root  (not for Ubuntu)
>         sudo chmod a+x /usr/sbin/pppd
> or under Ubuntu related Linuxes
>
>  sudo chmod a+x /usr/sbin/pppd
>
> Checking settings of:    /etc/ppp/options
> asyncmap 0
> noauth
> crtscts
> lock
> hide-password
> modem
> proxyarp
> lcp-echo-interval 30
> lcp-echo-failure 4
> noipx
>
> In case of a message like:
>    Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
> see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html
>
> For guidance on FAX usage, get from http://linmodems.technion.ac.il/packages/  get faxing.tar.gz
> It has samples for a modem using port /dev/ttySL0, which must be changed to match your modem's port.
>
> Read Modem/DOCs/YourSystem.txt concerning other COMM channels: eth0 eth1 eth2
> Which can interfere with Browser naviagation.
>
>  Don't worry about the following, it is for experts should trouble shooting be necessary.
> ==========================================================
>
>  Checking for
> modem support lines:
>  --------------------------------------
>      /device/modem symbolic link:
> slmodemd created symbolic link /dev/ttySL0:
>      Within /etc/udev/ files:
>
>      Within /etc/modprobe.conf files:
> /etc/modprobe.d/blacklist-modem.conf:# Uncomment these entries in order to blacklist unwanted modem drivers
> /etc/modprobe.d/blacklist-modem.conf:# blacklist snd-atiixp-modem
> /etc/modprobe.d/blacklist-modem.conf:# blacklist snd-via82xx-modem
> /etc/modprobe.d/alsa-base.conf:options snd-atiixp-modem index=-2
> /etc/modprobe.d/alsa-base.conf:options snd-via82xx-modem index=-2
>      Within any ancient /etc/devfs files:
>
>      Within ancient kernel 2.4.n /etc/module.conf files:
>
> --------- end modem support lines --------




[Index of Archives]     [Linux Media Development]     [Asterisk]     [DCCP]     [Netdev]     [X.org]     [Xfree86]     [Fedora Women]     [Linux USB]

  Powered by Linux