need help with Raspi Agere-Fax-modem

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Only plain text email is forwarded by the Discuss@xxxxxxxxxxxxx List Server,
as HTML can contain viruses. Use as the email Subject Line:
          ralphi, Germany  kernel 3.6.11+
With this Subject Line cogent experts will be alerted, and useful case names left in the Archive. YourCountry will enable Country specific guidance. Linux experts in YourCountry
can be found through: http://www.linux.org/groups/index.html.
They will know your Country's modem code, which may be essential for dialup service. Responses from Discuss@xxxxxxxxxxxxx are sometimes blocked by an Internet Provider mail filters.
So in a day, also check the Archived responses at http://www.linmodems.org
--------------------------  System information ----------------------------
CPU=armv6l,  debian ,  ALSA_version=1.0.25
Linux version 3.6.11+ (dc4@dc4-arm-01) (gcc version 4.7.2 20120731 (prerelease) (crosstool-NG linaro-1.13.1+bzr2458 - Linaro GCC 2012.08) ) #474 PREEMPT Thu Jun 13 17:14:42 BST 2013
scanModem update of:  2011_08_08

/etc/lsb-release not found


Presently install your Linux Distributions dkms package. It provides for automated driver updates, following upgrade of your kernel. For details see http://linux.dell.com/projects.shtml#dkms

There are no blacklisted modem drivers in /etc/modprobe*  files

Potentially useful modem drivers now loaded are:


Attached USB devices are:
ID 0424:9512 Standard Microsystems Corp.
ID 0424:ec00 Standard Microsystems Corp.
ID 12d1:1001 Huawei Technologies Co., Ltd. E169/E620/E800 HSDPA Modem
ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB
ID 047e:2892 Agere Systems, Inc. (Lucent) Systems Soft Modem
If a cellphone is not detected, see http://ubuntuforums.org/archive/index.php/t-878554.html A sample report is: http://linmodems.technion.ac.il/bigarch/archive-nineth/msg00578.html

Candidate PCI devices with modem chips are:
High Definition Audio cards can host modem chips.

=== Finished firmware and bootup diagnostics, next deducing cogent software. ===

Predictive  diagnostics for card in bus 001:
   Modem chipset  detected on
SLOT="Bus 001 Device 006:"
NAME="Agere Systems, Inc. (Lucent) Systems Soft Modem"
bus=001
USBmodemID=047e:2892
IDENT=agrsm
Driver=agrsm

For a detailed USB cellphone usage report, see http://linmodems.technion.ac.il/bigarch/archive-eighth/msg03240.html
For candidate modem in:  001
   Agere Systems, Inc. (Lucent) Systems Soft Modem
     Primary device ID:  047e:2892
Support type needed or chipset:    agrsm



The AgereSystems/LSI agrsm code supports compiling of a agrmodem + agrserial driver pair. There are a few different chipsets which use this driver pair, but they use different code resources:
Chipsets            KV*    PackageNames (most current as of November 2009)
----------------------------------------------------------------------------------------------
11c1:048c and 11c1:048f 2.6.29 agrsm048pci-2.1.60_20100108_i386.deb or agrsm048pci-2.1.60_20100108.tar.gz 11c1:0620 2.6.31 agrsm06pci-2.1.80_20100106_i386.deb or agrsm06pci-2.1.80~20100106.tar.gz !! 11c11040 (on HDA audio cards) 2.6.31 agrsm-11c11040_20091225_i386.deb or agrsm-11c11040-2.1.80~20091225.tar.bz2 !! All available at: http://linmodems.technion.ac.il/packages/ltmodem/11c11040/
Additionally there are;
automation & testing agrsm-tools_0.0.1_all.deb or agrsm-tools-0.0.1-2.noarch.rpm
General background                      agrsm_howto.txt
------------------------------------------------------------------------------------------------
* KV == latest kernel release with a reported success
!! Latest update with major credit to  Nikolay Zhuravlev
But see conflict issue: http://linmodems.technion.ac.il/bigarch/archive-nineth/msg02753.html For the 11c11040 chip with kernels 2.6.31 and later a change in a modules loading settingmay be necessary. Within the file /etc/modprobe.d/alsa-base.conf (or equivalent for your Distro), change the phrase:
     options snd-hda-intel power_save=10
  to:
     options snd-hda-intel power_save=0
or the agrsm drivers will not function. For Ubuntu related systems this can be done with:
  $ sudo gedit /etc/modprobe.d/alsa-base.conf

Report from  Bjorn Wielens:
Please note- trying to load the modules on a OpenSuSE 11.2 system gives
an error about the module_version symbol. Using:
# modprobe --force agrmodem
# modprobe --force agrserial
is necessary to load the drivers, and does not appear to cause ill effects.


All of the above packages are dkms competent. This means that if your Linux distros dkms package is previously installed, if provides for future updates matching forthcoming kernels.

-------------- end Agere Systems section -------------------


A UDEV device file system is not active.

The kernel was compiled with gcc version 4.7.2 and a compiler is not installed

linux-headers-3.6.11+ resources needed for compiling are not manifestly ready!

If compiling is necessary packages must be installed, providing:
   gcc-4.7  linux-headers-3.6.11+
Compressed files at: /usr/src/vpb-driver.tar.bz2


If a driver compilation fails, with message including some lack of some FileName.h (stdio.h for example), then Some additional kernel-header files need installation to /usr/include. The minimal additional packages are libc6-dev
and any of its dependents, under Ubuntu linux-libc-dev

If an alternate ethernet connection is available,
$  apt-get update
$  apt-get -s install linux-kernel-devel
will install needed packages.
For Debian/Ubuntu related distributions, run the following command to display the needed package list:

Otherwise packages have to be found through http://packages.ubuntu.com
Once downloaded and transferred into a Linux partition,
they can be installed alltogether with:
$ sudo dpkg -i *.deb

Checking settings of:    /etc/ppp/options


In case of a message like:
  Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html

For guidance on FAX usage, get from http://linmodems.technion.ac.il/packages/ get faxing.tar.gz It has samples for a modem using port /dev/ttySL0, which must be changed to match your modem's port.

Read Modem/DOCs/YourSystem.txt concerning other COMM channels: eth0
Which can interfere with Browser naviagation.

Don't worry about the following, it is for experts should trouble shooting be necessary.
==========================================================

Checking for modem support lines:
--------------------------------------
    /device/modem symbolic link:
slmodemd created symbolic link /dev/ttySL0:
    Within /etc/udev/ files:

    Within /etc/modprobe.conf files:
/etc/modprobe.d/alsa-base.conf:options snd-atiixp-modem index=-2
/etc/modprobe.d/alsa-base.conf:options snd-via82xx-modem index=-2
/etc/modprobe.d/alsa-base-blacklist.conf:# Uncomment these entries in order to blacklist unwanted modem drivers
/etc/modprobe.d/alsa-base-blacklist.conf:# blacklist snd-atiixp-modem
/etc/modprobe.d/alsa-base-blacklist.conf:# blacklist snd-via82xx-modem
    Within any ancient /etc/devfs files:

    Within ancient kernel 2.4.n /etc/module.conf files:

--------- end modem support lines --------

For Debian users, the linux-headers-3.6.11+.deb can be used instead of kernel-source/





[Index of Archives]     [Linux Media Development]     [Asterisk]     [DCCP]     [Netdev]     [X.org]     [Xfree86]     [Fedora Women]     [Linux USB]

  Powered by Linux