Christopher, UK BLAG release 140000 (spartakus) Kernel kernel 2.6.35.12-libre.90.fc14.i686

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



--------------------------  System information ----------------------------
CPU=i686,  BLAG
Kernel ,  ALSA_version=1.0.23
Linux version 2.6.35.12-libre.90.fc14.i686
(mockbuild@xxxxxxxxxxxxxxxxxxxxx) (gcc version 4.5.1 20100924 (Red Hat
4.5.1-4) (GCC) ) #1 SMP Sat Apr 23 11:42:42 EDT 2011
 scanModem update of:  2011_08_08

/etc/lsb-release not found


Presently install your Linux Distributions dkms package. It provides
for automated driver updates,
following upgrade of your kernel.  For details see
http://linux.dell.com/projects.shtml#dkms

 There are no blacklisted modem drivers in /etc/modprobe*  files

 Potentially useful modem drivers now loaded are:


Attached USB devices are:
 ID 05e3:1205 Genesys Logic, Inc. Afilias Optical Mouse H3003
If a cellphone is not detected, see
http://ubuntuforums.org/archive/index.php/t-878554.html
A sample report is:
http://linmodems.technion.ac.il/bigarch/archive-nineth/msg00578.html

If a USB modem or cellphone is attached and was not detected, please
provide available information in your request to discuss@xxxxxxxxxxxxx

Candidate PCI devices with modem chips are:
02:01.0 Communication controller: Intel Corporation 536EP Data Fax Modem
02:02.0 Communication controller: Conexant Systems, Inc. HSF 56k HSFi
Modem (rev 01)
High Definition Audio cards can host modem chips.

For candidate card in slot 02:01.0, firmware information and bootup
diagnostics are:
 PCI slot    PCI ID        SubsystemID    Name
 ----------    ---------    ---------    --------------
 02:01.0    8086:1040    8086:1000    Communication controller: Intel
Corporation 536EP Data Fax Modem

 Modem interrupt assignment and sharing:
   9:          0   IO-APIC-fasteoi   acpi
 --- Bootup diagnostics for card in PCI slot 02:01.0 ----
[    0.064907] pci 0000:02:01.0: reg 10: [mem 0xc0400000-0xc07fffff]
[    0.064955] pci 0000:02:01.0: supports D2
[    0.064959] pci 0000:02:01.0: PME# supported from D2 D3hot D3cold
[    0.064965] pci 0000:02:01.0: PME# disabled

 The PCI slot 02:01.0 of the modem card may be disabled early in
 a bootup process,  but then enabled later. If modem drivers load
 but the  modem is not responsive, read DOCs/Bootup.txt about possible fixes.
 Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx
 if help is needed.


For candidate card in slot 02:02.0, firmware information and bootup
diagnostics are:
 PCI slot    PCI ID        SubsystemID    Name
 ----------    ---------    ---------    --------------
 02:02.0    14f1:2f00    14f1:2004    Communication controller:
Conexant Systems, Inc. HSF 56k HSFi Modem

 Modem interrupt assignment and sharing:
  15:       6059   IO-APIC-edge      ata_piix
 --- Bootup diagnostics for card in PCI slot 02:02.0 ----
[    0.065004] pci 0000:02:02.0: reg 10: [mem 0xc0100000-0xc010ffff]
[    0.065013] pci 0000:02:02.0: reg 14: [io  0x2040-0x2047]
[    0.065053] pci 0000:02:02.0: PME# supported from D3hot D3cold
[    0.065058] pci 0000:02:02.0: PME# disabled

 The PCI slot 02:02.0 of the modem card may be disabled early in
 a bootup process,  but then enabled later. If modem drivers load
 but the  modem is not responsive, read DOCs/Bootup.txt about possible fixes.
 Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx
 if help is needed.


=== Finished firmware and bootup diagnostics, next deducing cogent software. ===

Predictive  diagnostics for card in bus 02:01.0:
    Modem chipset  detected on
NAME="Communication controller: Intel Corporation 536EP Data Fax Modem"
CLASS=0780
PCIDEV=8086:1040
SUBSYS=8086:1000
IRQ=9
IDENT=INTEL536EP

 For candidate modem in:  02:01.0
   0780 Communication controller: Intel Corporation 536EP Data Fax Modem
      Primary device ID:  8086:1040
 Support type needed or chipset:    INTEL536EP



For owners of a Dell PCs with Conexant HSF modems, a driver source
package with full speed enabled is available, but requires driver
compiling. Read DOCs/Conexant.txt


Modem support packages from Linuxant include resources for compiling drivers.
If an installer package matching your kernel_version  is not provided,
just install a generic code package.

 Start at  http://www.linuxant.com/drivers/ for
 eventually download of a -7.68.00.12full_k.???.zip package
 with ??? the package type (deb, rpm, tar etc)
 These packages have compiled drivers but will also compile a driver,
 if there is a mismatch between the resident kernel and provided driver.
 The generic -7.68.00.12full.tar.gz package only provides compiling support

02:01.0
02:02.0
 Read DOCs/Conexant.txt

Writing DOCs/Conexant.txt



Predictive  diagnostics for card in bus 02:02.0:
    Modem chipset  detected on
NAME="Communication controller: Conexant Systems, Inc. HSF 56k HSFi Modem "
CLASS=0780
PCIDEV=14f1:2f00
SUBSYS=14f1:2004
IRQ=5
IDENT=hsfmodem
Driver=hsfmodem-drivers

 For candidate modem in:  02:02.0
   0780 Communication controller: Conexant Systems, Inc. HSF 56k HSFi Modem
      Primary device ID:  14f1:2f00
 Support type needed or chipset:    hsfmodem



For owners of a Dell PCs with Conexant HSF modems, a driver source
package with full speed enabled is available, but requires driver
compiling. Read DOCs/Conexant.txt


Modem support packages from Linuxant include resources for compiling drivers.
If an installer package matching your kernel_version  is not provided,
just install a generic code package.

 Start at  http://www.linuxant.com/drivers/hsf/full for
 eventually download of a hsfmodem-7.68.00.12full_k.???.zip package
 with ??? the package type (deb, rpm, tar etc)
 These packages have compiled drivers but will also compile a driver,
 if there is a mismatch between the resident kernel and provided driver.
 The generic hsfmodem-7.68.00.12full.tar.gz package only provides
compiling support


Start at http://www.linuxant.com/drivers/hsf/downloads-license.php to find the
hsfmodem package matching your System. For several Linux distros, there are
precompiled drivers matched to specific kernels. These have within the FileName,
your KernelVersion:    2.6.35.12_libre.90.fc14.i686
They can be found through http://www.linuxant.com/drivers/hsf/full/downloads.php
A more precise location may be given a few paragraphs below.
If an EXACT Match with your your KernelVersion is not found, one of the
"Generic packages with source" near the bottom of the page must be used.
Downloaded packages must be moved into the Linux partition (home folder is OK)
and unzipped with:
    unzip hsf*.zip
The installation command for a .deb suffic packages is, with root/adm
permission:
   dpkg -i hsf*.deb
while for .rpm suffix it is, with:
  rpm -i hsf*.rpm
 Read DOCs/Conexant.txt

Writing DOCs/Conexant.txt


 Completed candidate modem analyses.

 The base of the UDEV device file system is: /dev/.udev

 The kernel was compiled with gcc version 4.5.1 and a compiler is not installed

 linux-headers-2.6.35.12-libre.90.fc14.i686 resources needed for
compiling are not manifestly ready!
 The code linking utility, ld, may be needed and is provided in the
binutils package
 The patch utility is needed for compiling ALSA drivers, and possibly others.

 If compiling is necessary packages must be installed, providing:
    gcc-4.5  kernel-source-2.6.35.12-libre.90.fc14.i686


If a driver compilation fails, with message including some lack of
some FileName.h (stdio.h for example), then
Some additional kernel-header files need installation to /usr/include.
The minimal additional packages are libc6-dev
and any of its dependents, under Ubuntu linux-libc-dev

If an alternate ethernet connection is available,
$  apt-get update
$  apt-get -s install linux-kernel-devel
will install needed packages.
For Debian/Ubuntu related distributions, run the following command to
display the needed package list:

Otherwise packages have to be found through http://packages.ubuntu.com
Once downloaded and transferred into a Linux partition,
they can be installed alltogether with:
$ sudo dpkg -i *.deb


Checking pppd properties:
    -r-xr-xr-x. 1 root root 355368 Nov 16  2010 /usr/sbin/pppd

In case of an "error 17" "serial loopback" problem, see:
    http://linmodems.technion.ac.il/linmodems/archive-sixth/msg02637.html

To enable dialout without Root permission do:
    $ su - root  (not for Ubuntu)
         chmod a+x /usr/sbin/pppd
or under Ubuntu related Linuxes
     chmod a+x /usr/sbin/pppd

Checking settings of:    /etc/ppp/options
lock

In case of a message like:
   Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html

For guidance on FAX usage, get from
http://linmodems.technion.ac.il/packages/  get faxing.tar.gz
It has samples for a modem using port /dev/ttySL0, which must be
changed to match your modem's port.

Read Modem/DOCs/YourSystem.txt concerning other COMM channels: eth0
Which can interfere with Browser naviagation.

 Don't worry about the following, it is for experts should trouble
shooting be necessary.
==========================================================

 Checking for modem support lines:
 --------------------------------------
     /device/modem symbolic link:
slmodemd created symbolic link /dev/ttySL0:
     Within /etc/udev/ files:

     Within /etc/modprobe.conf files:

     Within any ancient /etc/devfs files:

     Within ancient kernel 2.4.n /etc/module.conf files:

--------- end modem support lines --------
            CPU0       
   0:        196   IO-APIC-edge      timer
   1:        961   IO-APIC-edge      i8042
   3:          5   IO-APIC-edge    
   4:          5   IO-APIC-edge    
   7:          0   IO-APIC-edge      parport0
   8:          0   IO-APIC-edge      rtc0
   9:          0   IO-APIC-fasteoi   acpi
  14:       8353   IO-APIC-edge      ata_piix
  15:       6059   IO-APIC-edge      ata_piix
  16:       2899   IO-APIC-fasteoi   uhci_hcd:usb2, i915
  17:        128   IO-APIC-fasteoi   Intel 82801DB-ICH4
  18:      17526   IO-APIC-fasteoi   uhci_hcd:usb4
  19:          0   IO-APIC-fasteoi   uhci_hcd:usb3
  20:       2096   IO-APIC-fasteoi   eth0
  23:          2   IO-APIC-fasteoi   ehci_hcd:usb1
 NMI:          0   Non-maskable interrupts
 LOC:     131575   Local timer interrupts
 SPU:          0   Spurious interrupts
 PMI:          0   Performance monitoring interrupts
 PND:          0   Performance pending work
 RES:          0   Rescheduling interrupts
 CAL:          0   Function call interrupts
 TLB:          0   TLB shootdowns
 TRM:          0   Thermal event interrupts
 THR:          0   Threshold APIC interrupts
 MCE:          0   Machine check exceptions
 MCP:          5   Machine check polls
 ERR:          0
 MIS:          0

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.35.12-libre.90.fc14.i686 (mockbuild@xxxxxxxxxxxxxxxxxxxxx) (gcc version 4.5.1 20100924 (Red Hat 4.5.1-4) (GCC) ) #1 SMP Sat Apr 23 11:42:42 EDT 2011
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[    0.000000]  BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000001fcf0000 (usable)
[    0.000000]  BIOS-e820: 000000001fcf0000 - 000000001fcfb000 (ACPI data)
[    0.000000]  BIOS-e820: 000000001fcfb000 - 000000001fd00000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000001fd00000 - 000000001fe80000 (usable)
[    0.000000]  BIOS-e820: 000000001fe80000 - 0000000020000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  BIOS-e820: 00000000ff800000 - 00000000ffc00000 (reserved)
[    0.000000]  BIOS-e820: 00000000fffffc00 - 0000000100000000 (reserved)
[    0.000000] Using x86 segment limits to approximate NX protection
[    0.000000] DMI present.
[    0.000000] e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
[    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[    0.000000] last_pfn = 0x1fe80 max_arch_pfn = 0x100000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-C7FFF write-protect
[    0.000000]   C8000-E3FFF uncachable
[    0.000000]   E4000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask FE0000000 write-back
[    0.000000]   1 base 01FF80000 mask FFFF80000 uncachable
[    0.000000]   2 disabled
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] original variable MTRRs
[    0.000000] reg 0, base: 0GB, range: 512MB, type WB
[    0.000000] reg 1, base: 523776KB, range: 512KB, type UC
[    0.000000] total RAM covered: 511M
[    0.000000] Found optimal setting for mtrr clean up
[    0.000000]  gran_size: 64K 	chunk_size: 1M 	num_reg: 2  	lose cover RAM: 0G
[    0.000000] New variable MTRRs
[    0.000000] reg 0, base: 0GB, range: 512MB, type WB
[    0.000000] reg 1, base: 523776KB, range: 512KB, type UC
[    0.000000] initial memory mapped : 0 - 01000000
[    0.000000] found SMP MP-table at [c00f6340] f6340
[    0.000000] init_memory_mapping: 0000000000000000-000000001fe80000
[    0.000000]  0000000000 - 0000400000 page 4k
[    0.000000]  0000400000 - 001fc00000 page 2M
[    0.000000]  001fc00000 - 001fe80000 page 4k
[    0.000000] kernel direct mapping tables up to 1fe80000 @ 7000-e000
[    0.000000] RAMDISK: 1f148000 - 1fce0000
[    0.000000] ACPI: RSDP 000f6350 00014 (v00 PTLTD )
[    0.000000] ACPI: RSDT 1fcf758d 00030 (v01 PTLTD    RSDT   060400D0  LTP 00000000)
[    0.000000] ACPI: FACP 1fcfaf14 00074 (v01 IBM    NETVISTA 060400D0 PTL  00000001)
[    0.000000] ACPI: DSDT 1fcf75bd 03957 (v01    IBM    Jedda 060400D0 MSFT 0100000E)
[    0.000000] ACPI: FACS 1fcfbfc0 00040
[    0.000000] ACPI: APIC 1fcfaf88 00050 (v01 PTLTD  ? APIC   060400D0  LTP 00000000)
[    0.000000] ACPI: BOOT 1fcfafd8 00028 (v01 PTLTD  $SBFTBL$ 060400D0  LTP 00000001)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 0MB HIGHMEM available.
[    0.000000] 510MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 1fe80000
[    0.000000]   low ram: 0 - 1fe80000
[    0.000000]   node 0 low ram: 00000000 - 1fe80000
[    0.000000]   node 0 bootmap 0000b000 - 0000efd0
[    0.000000] (13/32 early reservations) ==> bootmem [0000000000 - 001fe80000]
[    0.000000]   #0 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
[    0.000000]   #1 [0000400000 - 0000c3e900]    TEXT DATA BSS ==> [0000400000 - 0000c3e900]
[    0.000000]   #2 [001f148000 - 001fce0000]          RAMDISK ==> [001f148000 - 001fce0000]
[    0.000000]   #3 [0000c3f000 - 0000c430d8]              BRK ==> [0000c3f000 - 0000c430d8]
[    0.000000]   #4 [00000f6350 - 0000100000]    BIOS reserved ==> [00000f6350 - 0000100000]
[    0.000000]   #5 [00000f6340 - 00000f6350]     MP-table mpf ==> [00000f6340 - 00000f6350]
[    0.000000]   #6 [000009f800 - 000009fd70]    BIOS reserved ==> [000009f800 - 000009fd70]
[    0.000000]   #7 [000009fec0 - 00000f6340]    BIOS reserved ==> [000009fec0 - 00000f6340]
[    0.000000]   #8 [000009fd70 - 000009fec0]     MP-table mpc ==> [000009fd70 - 000009fec0]
[    0.000000]   #9 [0000002000 - 0000003000]       TRAMPOLINE ==> [0000002000 - 0000003000]
[    0.000000]   #10 [0000003000 - 0000007000]      ACPI WAKEUP ==> [0000003000 - 0000007000]
[    0.000000]   #11 [0000007000 - 000000b000]          PGTABLE ==> [0000007000 - 000000b000]
[    0.000000]   #12 [000000b000 - 000000f000]          BOOTMAP ==> [000000b000 - 000000f000]
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000001 -> 0x00001000
[    0.000000]   Normal   0x00001000 -> 0x0001fe80
[    0.000000]   HighMem  empty
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[3] active PFN ranges
[    0.000000]     0: 0x00000001 -> 0x0000009f
[    0.000000]     0: 0x00000100 -> 0x0001fcf0
[    0.000000]     0: 0x0001fd00 -> 0x0001fe80
[    0.000000] On node 0 totalpages: 130574
[    0.000000] free_area_init_node: node 0, pgdat c0a00100, node_mem_map c1001020
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3966 pages, LIFO batch:0
[    0.000000]   Normal zone: 989 pages used for memmap
[    0.000000]   Normal zone: 125587 pages, LIFO batch:31
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x1008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[    0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[    0.000000] PM: Registered nosave memory: 000000001fcf0000 - 000000001fcfb000
[    0.000000] PM: Registered nosave memory: 000000001fcfb000 - 000000001fd00000
[    0.000000] Allocating PCI resources starting at 20000000 (gap: 20000000:dec00000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:1 nr_node_ids:1
[    0.000000] PERCPU: Embedded 14 pages/cpu @c1800000 s35136 r0 d22208 u4194304
[    0.000000] pcpu-alloc: s35136 r0 d22208 u4194304 alloc=1*4194304
[    0.000000] pcpu-alloc: [0] 0 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 129553
[    0.000000] Kernel command line: ro root=/dev/mapper/VolGroup-lv_root rd_LVM_LV=VolGroup/lv_root rd_LVM_LV=VolGroup/lv_swap rd_NO_LUKS rd_NO_MD rd_NO_DM LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYBOARDTYPE=pc KEYTABLE=uk rhgb quiet
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Enabling fast FPU save and restore... done.
[    0.000000] Enabling unmasked SIMD FPU exception support... done.
[    0.000000] Initializing CPU#0
[    0.000000] allocated 2613740 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] Initializing HighMem for node 0 (00000000:00000000)
[    0.000000] Memory: 494792k/522752k available (3770k kernel code, 27504k reserved, 2496k data, 608k init, 0k highmem)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xff575000 - 0xfffff000   (10792 kB)
[    0.000000]     pkmap   : 0xff000000 - 0xff400000   (4096 kB)
[    0.000000]     vmalloc : 0xe0680000 - 0xfeffe000   ( 489 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xdfe80000   ( 510 MB)
[    0.000000]       .init : 0xc0a1f000 - 0xc0ab7000   ( 608 kB)
[    0.000000]       .data : 0xc07aeabe - 0xc0a1ee70   (2496 kB)
[    0.000000]       .text : 0xc0400000 - 0xc07aeabe   (3770 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] SLUB: Genslabs=13, HWalign=128, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] 	RCU-based detection of stalled CPUs is disabled.
[    0.000000] 	Verbose stalled-CPUs detection is disabled.
[    0.000000] NR_IRQS:2304
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 2790.840 MHz processor.
[    0.002008] Calibrating delay loop (skipped), value calculated using timer frequency.. 5581.68 BogoMIPS (lpj=2790840)
[    0.002017] pid_max: default: 32768 minimum: 301
[    0.002052] Security Framework initialized
[    0.002075] SELinux:  Initializing.
[    0.002110] SELinux:  Starting in permissive mode
[    0.002197] Mount-cache hash table entries: 512
[    0.002461] Initializing cgroup subsys ns
[    0.002472] Initializing cgroup subsys cpuacct
[    0.002480] Initializing cgroup subsys memory
[    0.002494] Initializing cgroup subsys devices
[    0.002500] Initializing cgroup subsys freezer
[    0.002503] Initializing cgroup subsys net_cls
[    0.002507] Initializing cgroup subsys blkio
[    0.002564] CPU0: Hyper-Threading is disabled
[    0.002570] mce: CPU supports 4 MCE banks
[    0.002585] CPU0: Thermal monitoring enabled (TM1)
[    0.002606] Performance Events: Netburst events, Netburst P4/Xeon PMU driver.
[    0.002633] ... version:                0
[    0.002635] ... bit width:              40
[    0.002638] ... generic registers:      18
[    0.002641] ... value mask:             000000ffffffffff
[    0.002645] ... max period:             0000007fffffffff
[    0.002647] ... fixed-purpose events:   0
[    0.002650] ... event mask:             000000000003ffff
[    0.003014] SMP alternatives: switching to UP code
[    0.007743] Freeing SMP alternatives: 12k freed
[    0.007757] ACPI: Core revision 20100428
[    0.014020] ftrace: converting mcount calls to 0f 1f 44 00 00
[    0.014031] ftrace: allocating 23151 entries in 46 pages
[    0.015164] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.016673] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
[    0.016999] ..MP-BIOS bug: 8254 timer not connected to IO-APIC
[    0.016999] ...trying to set up timer (IRQ0) through the 8259A ...
[    0.016999] ..... (found apic 0 pin 0) ...
[    0.027749] ....... works.
[    0.027752] CPU0: Intel(R) Pentium(R) 4 CPU 2.80GHz stepping 07
[    0.027999] Brought up 1 CPUs
[    0.027999] Total of 1 processors activated (5581.68 BogoMIPS).
[    0.027999] sizeof(vma)=88 bytes
[    0.027999] sizeof(page)=32 bytes
[    0.027999] sizeof(inode)=352 bytes
[    0.027999] sizeof(dentry)=132 bytes
[    0.027999] sizeof(ext3inode)=508 bytes
[    0.027999] sizeof(buffer_head)=56 bytes
[    0.027999] sizeof(skbuff)=192 bytes
[    0.027999] sizeof(task_struct)=3228 bytes
[    0.027999] devtmpfs: initialized
[    0.029896] atomic64 test passed for i586+ platform with CX8 and with SSE
[    0.029933] Time: 11:01:11  Date: 07/26/13
[    0.030010] NET: Registered protocol family 16
[    0.030169] ACPI: bus type pci registered
[    0.030660] PCI: PCI BIOS revision 2.10 entry at 0xfd9bd, last bus=2
[    0.030664] PCI: Using configuration type 1 for base access
[    0.032601] bio: create slab <bio-0> at 0
[    0.033515] ACPI: EC: Look up EC in DSDT
[    0.036164] ACPI: Interpreter enabled
[    0.036169] ACPI: (supports S0 S1 S3 S4 S5)
[    0.036201] ACPI: Using IOAPIC for interrupt routing
[    0.059742] ACPI: No dock devices found.
[    0.059750] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[    0.061175] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.064009] pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7] (ignored)
[    0.064015] pci_root PNP0A03:00: host bridge window [io  0x0d00-0xffff] (ignored)
[    0.064019] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[    0.064025] pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000d3fff] (ignored)
[    0.064029] pci_root PNP0A03:00: host bridge window [mem 0x000d4000-0x000d7fff] (ignored)
[    0.064034] pci_root PNP0A03:00: host bridge window [mem 0x000d8000-0x000dbfff] (ignored)
[    0.064039] pci_root PNP0A03:00: host bridge window [mem 0x000dc000-0x000dffff] (ignored)
[    0.064044] pci_root PNP0A03:00: host bridge window [mem 0x20000000-0xfebfffff] (ignored)
[    0.064074] pci 0000:00:00.0: reg 10: [mem 0xd0000000-0xdfffffff pref]
[    0.064152] pci 0000:00:02.0: reg 10: [mem 0x88000000-0x8fffffff pref]
[    0.064160] pci 0000:00:02.0: reg 14: [mem 0x80000000-0x8007ffff]
[    0.064273] pci 0000:00:1d.0: reg 20: [io  0x1800-0x181f]
[    0.064332] pci 0000:00:1d.1: reg 20: [io  0x1820-0x183f]
[    0.064390] pci 0000:00:1d.2: reg 20: [io  0x1840-0x185f]
[    0.064447] pci 0000:00:1d.7: reg 10: [mem 0xc0080000-0xc00803ff]
[    0.064504] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.064511] pci 0000:00:1d.7: PME# disabled
[    0.064563] * The chipset may have PM-Timer Bug. Due to workarounds for a bug,
[    0.064566] * this clock source is slow. If you are sure your timer does not have
[    0.064569] * this bug, please use "acpi_pm_good" to disable the workaround
[    0.064619] pci 0000:00:1f.0: quirk: [io  0x1000-0x107f] claimed by ICH4 ACPI/GPIO/TCO
[    0.064626] pci 0000:00:1f.0: quirk: [io  0x1180-0x11bf] claimed by ICH4 GPIO
[    0.064654] pci 0000:00:1f.1: reg 10: [io  0x0000-0x0007]
[    0.064662] pci 0000:00:1f.1: reg 14: [io  0x0000-0x0003]
[    0.064670] pci 0000:00:1f.1: reg 18: [io  0x0000-0x0007]
[    0.064679] pci 0000:00:1f.1: reg 1c: [io  0x0000-0x0003]
[    0.064687] pci 0000:00:1f.1: reg 20: [io  0x1860-0x186f]
[    0.064695] pci 0000:00:1f.1: reg 24: [mem 0x00000000-0x000003ff]
[    0.064751] pci 0000:00:1f.3: reg 20: [io  0x1880-0x189f]
[    0.064796] pci 0000:00:1f.5: reg 10: [io  0x1c00-0x1cff]
[    0.064804] pci 0000:00:1f.5: reg 14: [io  0x18c0-0x18ff]
[    0.064812] pci 0000:00:1f.5: reg 18: [mem 0xc0080c00-0xc0080dff]
[    0.064820] pci 0000:00:1f.5: reg 1c: [mem 0xc0080800-0xc00808ff]
[    0.064852] pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold
[    0.064858] pci 0000:00:1f.5: PME# disabled
[    0.064907] pci 0000:02:01.0: reg 10: [mem 0xc0400000-0xc07fffff]
[    0.064955] pci 0000:02:01.0: supports D2
[    0.064959] pci 0000:02:01.0: PME# supported from D2 D3hot D3cold
[    0.064965] pci 0000:02:01.0: PME# disabled
[    0.065004] pci 0000:02:02.0: reg 10: [mem 0xc0100000-0xc010ffff]
[    0.065013] pci 0000:02:02.0: reg 14: [io  0x2040-0x2047]
[    0.065053] pci 0000:02:02.0: PME# supported from D3hot D3cold
[    0.065058] pci 0000:02:02.0: PME# disabled
[    0.065099] pci 0000:02:08.0: reg 10: [mem 0xc0110000-0xc0110fff]
[    0.065107] pci 0000:02:08.0: reg 14: [io  0x2000-0x203f]
[    0.065147] pci 0000:02:08.0: supports D1 D2
[    0.065151] pci 0000:02:08.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.065156] pci 0000:02:08.0: PME# disabled
[    0.065192] pci 0000:00:1e.0: PCI bridge to [bus 02-02] (subtractive decode)
[    0.065199] pci 0000:00:1e.0:   bridge window [io  0x2000-0x2fff]
[    0.065205] pci 0000:00:1e.0:   bridge window [mem 0xc0100000-0xc07fffff]
[    0.065211] pci 0000:00:1e.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[    0.065216] pci 0000:00:1e.0:   bridge window [io  0x0000-0xffff] (subtractive decode)
[    0.065221] pci 0000:00:1e.0:   bridge window [mem 0x00000000-0xffffffff] (subtractive decode)
[    0.065232] pci_bus 0000:00: on NUMA node 0
[    0.065238] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.065422] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.SLOT._PRT]
[    0.135226] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[    0.135361] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *9 10 11 12 14 15)
[    0.135495] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 7 9 10 11 12 14 15)
[    0.135627] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 *10 11 12 14 15)
[    0.135766] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[    0.135908] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[    0.136059] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[    0.136203] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 *9 10 11 12 14 15)
[    0.136259] HEST: Table is not found!
[    0.136378] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.136390] vgaarb: loaded
[    0.136560] SCSI subsystem initialized
[    0.136678] libata version 3.00 loaded.
[    0.136773] usbcore: registered new interface driver usbfs
[    0.136804] usbcore: registered new interface driver hub
[    0.136847] usbcore: registered new device driver usb
[    0.136957] PCI: Using ACPI for IRQ routing
[    0.137013] PCI: pci_cache_line_size set to 64 bytes
[    0.137080] reserve RAM buffer: 000000000009f800 - 000000000009ffff 
[    0.137085] reserve RAM buffer: 000000001fcf0000 - 000000001fffffff 
[    0.137090] reserve RAM buffer: 000000001fe80000 - 000000001fffffff 
[    0.137241] NetLabel: Initializing
[    0.137244] NetLabel:  domain hash size = 128
[    0.137247] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.137266] NetLabel:  unlabeled traffic allowed by default
[    0.137285] Switching to clocksource tsc
[    0.154776] pnp: PnP ACPI init
[    0.154823] ACPI: bus type pnp registered
[    0.156314] pnp 00:00: [bus 00-ff]
[    0.156318] pnp 00:00: [io  0x0000-0x0cf7 window]
[    0.156322] pnp 00:00: [io  0x0cf8-0x0cff]
[    0.156326] pnp 00:00: [io  0x0d00-0xffff window]
[    0.156330] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[    0.156334] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[    0.156338] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[    0.156341] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[    0.156345] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[    0.156349] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[    0.156353] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[    0.156357] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[    0.156361] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[    0.156364] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[    0.156368] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[    0.156372] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[    0.156376] pnp 00:00: [mem 0x000ec000-0x000effff window]
[    0.156380] pnp 00:00: [mem 0x20000000-0xfebfffff window]
[    0.156456] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[    0.156643] pnp 00:01: [io  0x0010-0x001f]
[    0.156647] pnp 00:01: [io  0x0024-0x0025]
[    0.156650] pnp 00:01: [io  0x0028-0x0029]
[    0.156653] pnp 00:01: [io  0x002c-0x002d]
[    0.156656] pnp 00:01: [io  0x002e-0x002f]
[    0.156659] pnp 00:01: [io  0x0030-0x0031]
[    0.156662] pnp 00:01: [io  0x0034-0x0035]
[    0.156665] pnp 00:01: [io  0x0038-0x0039]
[    0.156668] pnp 00:01: [io  0x003c-0x003d]
[    0.156671] pnp 00:01: [io  0x0050-0x0053]
[    0.156674] pnp 00:01: [io  0x0072-0x0077]
[    0.156677] pnp 00:01: [io  0x0080]
[    0.156680] pnp 00:01: [io  0x0090-0x009f]
[    0.156694] pnp 00:01: [io  0x00a4-0x00a5]
[    0.156697] pnp 00:01: [io  0x00a8-0x00a9]
[    0.156700] pnp 00:01: [io  0x00ac-0x00ad]
[    0.156703] pnp 00:01: [io  0x00b0-0x00b5]
[    0.156706] pnp 00:01: [io  0x00b8-0x00b9]
[    0.156709] pnp 00:01: [io  0x00bc-0x00bd]
[    0.156713] pnp 00:01: [io  0x04d0-0x04d1]
[    0.156716] pnp 00:01: [io  0xfe00]
[    0.156718] pnp 00:01: [io  0x0800-0x087f]
[    0.156722] pnp 00:01: [io  0x1000-0x107f]
[    0.156725] pnp 00:01: [io  0x1100-0x111f]
[    0.156728] pnp 00:01: [io  0x1180-0x11bf]
[    0.156731] pnp 00:01: [mem 0xfec00000]
[    0.156734] pnp 00:01: [mem 0xfee00000]
[    0.156738] pnp 00:01: [mem 0xeffffc00]
[    0.156859] pnp 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.156876] pnp 00:02: [io  0x0000-0x000f]
[    0.156880] pnp 00:02: [io  0x0081-0x008f]
[    0.156891] pnp 00:02: [io  0x00c0-0x00df]
[    0.156895] pnp 00:02: [dma 4]
[    0.156925] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.156942] pnp 00:03: [io  0x00f0-0x00fe]
[    0.156963] pnp 00:03: [irq 13]
[    0.156994] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.157013] pnp 00:04: [io  0x0070-0x0071]
[    0.157020] pnp 00:04: [irq 8]
[    0.157064] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.157079] pnp 00:05: [io  0x0061]
[    0.157110] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[    0.157461] pnp 00:06: [mem 0xff800000-0xffffffff]
[    0.157498] pnp 00:06: Plug and Play ACPI device, IDs INT0800 (active)
[    0.157599] pnp 00:07: [io  0x0060]
[    0.157603] pnp 00:07: [io  0x0064]
[    0.157609] pnp 00:07: [irq 1]
[    0.157647] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.157783] pnp 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.157911] pnp 00:09: [irq 12]
[    0.157959] pnp 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.162456] pnp 00:0a: [io  0x03f0-0x03f5]
[    0.162459] pnp 00:0a: [io  0x03f7]
[    0.162466] pnp 00:0a: [irq 6]
[    0.162469] pnp 00:0a: [dma 2]
[    0.163967] pnp 00:0a: Plug and Play ACPI device, IDs PNP0700 (active)
[    0.168571] pnp 00:0b: [io  0x03f8-0x03ff]
[    0.168579] pnp 00:0b: [irq 4]
[    0.170114] pnp 00:0b: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.175953] pnp 00:0c: [io  0x02f8-0x02ff]
[    0.175960] pnp 00:0c: [irq 3]
[    0.177860] pnp 00:0c: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.184950] pnp 00:0d: [io  0x0378-0x037f]
[    0.184954] pnp 00:0d: [io  0x0778-0x077f]
[    0.184961] pnp 00:0d: [irq 7]
[    0.184963] pnp 00:0d: [dma 3]
[    0.186933] pnp 00:0d: Plug and Play ACPI device, IDs PNP0401 (active)
[    0.189133] pnp: PnP ACPI: found 14 devices
[    0.189136] ACPI: ACPI bus type pnp unregistered
[    0.189158] system 00:01: [io  0x04d0-0x04d1] has been reserved
[    0.189163] system 00:01: [io  0xfe00] has been reserved
[    0.189168] system 00:01: [io  0x0800-0x087f] has been reserved
[    0.189173] system 00:01: [io  0x1000-0x107f] has been reserved
[    0.189177] system 00:01: [io  0x1100-0x111f] has been reserved
[    0.189182] system 00:01: [io  0x1180-0x11bf] has been reserved
[    0.189188] system 00:01: [mem 0xfec00000] could not be reserved
[    0.189193] system 00:01: [mem 0xfee00000] has been reserved
[    0.189197] system 00:01: [mem 0xeffffc00] has been reserved
[    0.226449] pci 0000:00:1f.1: BAR 5: assigned [mem 0x20000000-0x200003ff]
[    0.226459] pci 0000:00:1f.1: BAR 5: set to [mem 0x20000000-0x200003ff] (PCI address [0x20000000-0x200003ff]
[    0.226464] pci 0000:00:1e.0: PCI bridge to [bus 02-02]
[    0.226469] pci 0000:00:1e.0:   bridge window [io  0x2000-0x2fff]
[    0.226476] pci 0000:00:1e.0:   bridge window [mem 0xc0100000-0xc07fffff]
[    0.226482] pci 0000:00:1e.0:   bridge window [mem pref disabled]
[    0.226502] pci 0000:00:1e.0: setting latency timer to 64
[    0.226507] pci_bus 0000:00: resource 0 [io  0x0000-0xffff]
[    0.226511] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
[    0.226514] pci_bus 0000:02: resource 0 [io  0x2000-0x2fff]
[    0.226518] pci_bus 0000:02: resource 1 [mem 0xc0100000-0xc07fffff]
[    0.226521] pci_bus 0000:02: resource 4 [io  0x0000-0xffff]
[    0.226525] pci_bus 0000:02: resource 5 [mem 0x00000000-0xffffffff]
[    0.226578] NET: Registered protocol family 2
[    0.226645] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[    0.226819] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[    0.226965] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
[    0.227113] TCP: Hash tables configured (established 16384 bind 16384)
[    0.227118] TCP reno registered
[    0.227123] UDP hash table entries: 256 (order: 1, 8192 bytes)
[    0.227137] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[    0.227236] NET: Registered protocol family 1
[    0.227264] pci 0000:00:02.0: Boot video device
[    0.227487] pci 0000:02:08.0: Firmware left e100 interrupts enabled; disabling
[    0.227495] PCI: CLS 32 bytes, default 64
[    0.227614] Trying to unpack rootfs image as initramfs...
[    0.696144] Freeing initrd memory: 11872k freed
[    0.721672] Simple Boot Flag at 0x6c set to 0x1
[    0.722062] IBM machine detected. Enabling interrupts during APM calls.
[    0.722066] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[    0.722072] apm: overridden by ACPI.
[    0.722294] audit: initializing netlink socket (disabled)
[    0.722322] type=2000 audit(1374836471.720:1): initialized
[    0.734586] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    0.736556] VFS: Disk quotas dquot_6.5.2
[    0.736624] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.737351] msgmni has been set to 989
[    0.737444] SELinux:  Registering netfilter hooks
[    0.737925] alg: No test for stdrng (krng)
[    0.738036] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.738042] io scheduler noop registered
[    0.738045] io scheduler deadline registered
[    0.738064] io scheduler cfq registered (default)
[    0.738359] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.738391] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.738395] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.738916] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/PNP0C0C:00/input/input0
[    0.738926] ACPI: Power Button [PWRB]
[    0.739010] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    0.739016] ACPI: Power Button [PWRF]
[    0.739143] ACPI: acpi_idle registered with cpuidle
[    0.758730] thermal LNXTHERM:01: registered as thermal_zone0
[    0.758742] ACPI: Thermal Zone [THM0] (51 C)
[    0.758766] ERST: Table is not found!
[    0.758835] isapnp: Scanning for PnP cards...
[    1.115619] isapnp: No Plug & Play device found
[    1.115962] Non-volatile memory driver v1.3
[    1.115966] Linux agpgart interface v0.103
[    1.116090] agpgart-intel 0000:00:00.0: Intel 830M Chipset
[    1.116345] agpgart-intel 0000:00:00.0: detected 892K stolen memory
[    1.118324] agpgart-intel 0000:00:00.0: AGP aperture is 128M @ 0x88000000
[    1.118452] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.362269] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    1.606269] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[    1.606740] 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    1.606894] 00:0c: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[    1.608703] brd: module loaded
[    1.609548] loop: module loaded
[    1.609767] ata_piix 0000:00:1f.1: version 2.13
[    1.609788] ata_piix 0000:00:1f.1: enabling device (0005 -> 0007)
[    1.609812] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    1.609904] ata_piix 0000:00:1f.1: setting latency timer to 64
[    1.610094] scsi0 : ata_piix
[    1.610227] scsi1 : ata_piix
[    1.611589] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1860 irq 14
[    1.611594] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1868 irq 15
[    1.611727] Fixed MDIO Bus: probed
[    1.611864] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.611908] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[    1.611939] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    1.611944] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    1.612068] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    1.616013] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[    1.616280] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xc0080000
[    1.626015] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    1.626063] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.626068] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.626072] usb usb1: Product: EHCI Host Controller
[    1.626075] usb usb1: Manufacturer: Linux 2.6.35.12-libre.90.fc14.i686 ehci_hcd
[    1.626079] usb usb1: SerialNumber: 0000:00:1d.7
[    1.626246] hub 1-0:1.0: USB hub found
[    1.626254] hub 1-0:1.0: 6 ports detected
[    1.626369] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.626391] uhci_hcd: USB Universal Host Controller Interface driver
[    1.626454] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.626466] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    1.626470] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    1.626546] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    1.626588] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00001800
[    1.626637] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    1.626642] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.626646] usb usb2: Product: UHCI Host Controller
[    1.626649] usb usb2: Manufacturer: Linux 2.6.35.12-libre.90.fc14.i686 uhci_hcd
[    1.626652] usb usb2: SerialNumber: 0000:00:1d.0
[    1.626798] hub 2-0:1.0: USB hub found
[    1.626806] hub 2-0:1.0: 2 ports detected
[    1.626894] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    1.626905] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    1.626909] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    1.626981] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    1.627047] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001820
[    1.627095] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    1.627100] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.627103] usb usb3: Product: UHCI Host Controller
[    1.627106] usb usb3: Manufacturer: Linux 2.6.35.12-libre.90.fc14.i686 uhci_hcd
[    1.627110] usb usb3: SerialNumber: 0000:00:1d.1
[    1.627251] hub 3-0:1.0: USB hub found
[    1.627257] hub 3-0:1.0: 2 ports detected
[    1.627333] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    1.627343] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    1.627348] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    1.627410] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    1.627445] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001840
[    1.627495] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    1.627500] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.627503] usb usb4: Product: UHCI Host Controller
[    1.627506] usb usb4: Manufacturer: Linux 2.6.35.12-libre.90.fc14.i686 uhci_hcd
[    1.627509] usb usb4: SerialNumber: 0000:00:1d.2
[    1.627648] hub 4-0:1.0: USB hub found
[    1.627656] hub 4-0:1.0: 2 ports detected
[    1.627817] PNP: PS/2 Controller [PNP0303:KBC] at 0x60,0x64 irq 1
[    1.627821] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[    1.628278] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.628406] mice: PS/2 mouse device common for all mice
[    1.628653] rtc_cmos 00:04: RTC can wake from S4
[    1.628737] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[    1.628766] rtc0: alarms up to one month, y3k, 114 bytes nvram
[    1.628935] device-mapper: uevent: version 1.0.3
[    1.629136] device-mapper: ioctl: 4.19.1-ioctl (2010-10-12) initialised: dm-devel@xxxxxxxxxx
[    1.629270] cpuidle: using governor ladder
[    1.629273] cpuidle: using governor menu
[    1.629582] usbcore: registered new interface driver hiddev
[    1.629602] usbcore: registered new interface driver usbhid
[    1.629605] usbhid: USB HID core driver
[    1.629644] nf_conntrack version 0.5.0 (7916 buckets, 31664 max)
[    1.629827] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
[    1.629831] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
[    1.629834] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
[    1.629950] ip_tables: (C) 2000-2006 Netfilter Core Team
[    1.629970] TCP cubic registered
[    1.629974] Initializing XFRM netlink socket
[    1.629995] NET: Registered protocol family 17
[    1.630087] Using IPI No-Shortcut mode
[    1.630241] PM: Resume from disk failed.
[    1.630260] registered taskstats version 1
[    1.630468]   Magic number: 5:88:25
[    1.630574] rtc_cmos 00:04: setting system clock to 2013-07-26 11:01:12 UTC (1374836472)
[    1.630625] Initalizing network drop monitor service
[    1.645284] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[    1.770556] ata2.00: ATAPI: HL-DT-ST RW/DVD GCC-4320B, 1.11, max UDMA/33
[    1.770841] ata1.00: ATA-7: Maxtor 6E040L0, NAR61590, max UDMA/133
[    1.770846] ata1.00: 78156288 sectors, multi 16: LBA 
[    1.773450] ata2.00: configured for UDMA/33
[    1.776365] ata1.00: configured for UDMA/100
[    1.776535] scsi 0:0:0:0: Direct-Access     ATA      Maxtor 6E040L0   NAR6 PQ: 0 ANSI: 5
[    1.776780] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.777042] sd 0:0:0:0: [sda] 78156288 512-byte logical blocks: (40.0 GB/37.2 GiB)
[    1.777135] sd 0:0:0:0: [sda] Write Protect is off
[    1.777140] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.777178] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.777500]  sda:
[    1.778033] scsi 1:0:0:0: CD-ROM            HL-DT-ST RW/DVD GCC-4320B 1.11 PQ: 0 ANSI: 5
[    1.779966] sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
[    1.779971] Uniform CD-ROM driver Revision: 3.20
[    1.780157] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    1.780257] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    1.784232]  sda1 sda2
[    1.784586] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.784608] Freeing unused kernel memory: 608k freed
[    1.785681] Write protecting the kernel text: 3772k
[    1.785742] Write protecting the kernel read-only data: 1840k
[    1.810455] dracut: dracut-006-6.fc14
[    1.820450] dracut: rd_NO_LUKS: removing cryptoluks activation
[    1.838271] udev[67]: starting version 161
[    1.957542] [drm] Initialized drm 1.1.0 20060810
[    1.994354] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.994365] i915 0000:00:02.0: setting latency timer to 64
[    2.013500] [drm] set up 7M of stolen space
[    2.037916] [drm] initialized overlay support
[    2.168572] usb 4-1: new low speed USB device using uhci_hcd and address 2
[    2.177823] fbcon: inteldrmfb (fb0) is primary device
[    2.231293] Console: switching to colour frame buffer device 128x48
[    2.235440] fb0: inteldrmfb frame buffer device
[    2.235443] drm: registered panic notifier
[    2.235449] Slow work thread pool: Starting up
[    2.235541] Slow work thread pool: Ready
[    2.235555] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[    2.274173] dracut: Starting plymouth daemon
[    2.516336] usb 4-1: New USB device found, idVendor=05e3, idProduct=1205
[    2.516344] usb 4-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    2.516349] usb 4-1: Product: USB Mouse              
[    2.533042] input: USB Mouse               as /devices/pci0000:00/0000:00:1d.2/usb4/4-1/4-1:1.0/input/input3
[    2.533438] generic-usb 0003:05E3:1205.0001: input,hidraw0: USB HID v1.10 Mouse [USB Mouse              ] on usb-0000:00:1d.2-1/input0
[    3.573146] dracut: rd_NO_DM: removing DM RAID activation
[    3.580390] dracut: rd_NO_MD: removing MD RAID activation
[    4.215728] dracut: Scanning devices sda2  for LVM logical volumes VolGroup/lv_root VolGroup/lv_swap 
[    4.239851] dracut: inactive '/dev/VolGroup/lv_root' [35.81 GiB] inherit
[    4.239957] dracut: inactive '/dev/VolGroup/lv_swap' [960.00 MiB] inherit
[    4.687768] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[    4.720709] dracut: Mounted root filesystem /dev/mapper/VolGroup-lv_root
[    4.812155] dracut: Loading SELinux policy
[    5.139277] SELinux:  Disabled at runtime.
[    5.139318] SELinux:  Unregistering netfilter hooks
[    5.139341] type=1404 audit(1374836476.007:2): selinux=0 auid=4294967295 ses=4294967295
[    5.170108] dracut: /sbin/load_policy: Can't load policy: No such file or directory
[    5.277703] dracut: Switching root
[    6.294403] readahead: starting
[    7.097932] udev[362]: starting version 161
[    8.544457] parport_pc 00:0d: reported by Plug and Play ACPI
[    8.544514] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
[    8.990456] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
[    8.990463] e100: Copyright(c) 1999-2006 Intel Corporation
[    8.990538] e100 0000:02:08.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[    9.014302] e100 0000:02:08.0: PME# disabled
[    9.017674] e100 0000:02:08.0: eth0: addr 0xc0110000, irq 20, MAC addr 00:09:6b:bd:ea:59
[    9.028735] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    9.028747] ACPI: resource 0000:00:1f.3 [io  0x1880-0x189f] conflicts with ACPI region SMBR [??? 0x00001880-0x00001887 flags 0x52]
[    9.028752] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    9.080184] intel_rng: Firmware space is locked read-only. If you can't or
[    9.080188] intel_rng: don't want to disable this in firmware setup, and if
[    9.080191] intel_rng: you are certain that your system has a functional
[    9.080193] intel_rng: RNG, try using the 'no_fwh_detect' option.
[    9.090862] ppdev: user-space parallel port driver
[    9.168839] iTCO_vendor_support: vendor-support=0
[    9.172295] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
[    9.173339] iTCO_wdt: Found a ICH4 TCO device (Version=1, TCOBASE=0x1060)
[    9.174270] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    9.659503] Intel ICH 0000:00:1f.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    9.659569] Intel ICH 0000:00:1f.5: setting latency timer to 64
[   10.082027] intel8x0_measure_ac97_clock: measured 50950 usecs (2456 samples)
[   10.082034] intel8x0: clocking to 48000
[   11.210955] EXT4-fs (dm-0): re-mounted. Opts: (null)
[   11.528388] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[   12.082086] Adding 983036k swap on /dev/mapper/VolGroup-lv_swap.  Priority:-1 extents:1 across:983036k 
[   13.177876] NET: Registered protocol family 10
[   13.178210] lo: Disabled Privacy Extensions
[   13.185372] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   14.020920] p4-clockmod: P4/Xeon(TM) CPU On-Demand Clock Modulation available
[   17.848904] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   23.335866] render error detected, EIR: 0x00000010
[   23.335877] [drm:i915_report_and_clear_eir] *ERROR* EIR stuck: 0x00000010, masking
[   23.335908] render error detected, EIR: 0x00000010
[   37.811277] fuse init (API version 7.14)
[  380.004153] e100 0000:02:08.0: eth0: NIC Link is Up 100 Mbps Full Duplex
[  380.004312] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[  390.258040] eth0: no IPv6 routers present

Module                  Size  Used by
fuse                   51887  3 
p4_clockmod             3159  0 
ip6t_REJECT             3470  2 
nf_conntrack_ipv6      14441  2 
ip6table_filter         1207  1 
ip6_tables              9929  1 ip6table_filter
ipv6                  229581  20 ip6t_REJECT,nf_conntrack_ipv6
uinput                  5228  0 
snd_intel8x0           23144  2 
snd_ac97_codec         89730  1 snd_intel8x0
ac97_bus                 922  1 snd_ac97_codec
snd_seq                43435  0 
snd_seq_device          5056  1 snd_seq
snd_pcm                61769  2 snd_intel8x0,snd_ac97_codec
iTCO_wdt                8960  0 
iTCO_vendor_support     2070  1 iTCO_wdt
ppdev                   6808  0 
i2c_i801                9016  0 
e100                   27039  0 
snd_timer              15435  2 snd_seq,snd_pcm
mii                     3578  1 e100
snd                    47397  10 snd_intel8x0,snd_ac97_codec,snd_seq,snd_seq_device,snd_pcm,snd_timer
soundcore               5088  1 snd
snd_page_alloc          6180  2 snd_intel8x0,snd_pcm
parport_pc             17897  0 
parport                26215  2 ppdev,parport_pc
i915                  242432  3 
drm_kms_helper         22278  1 i915
drm                   139248  3 i915,drm_kms_helper
i2c_algo_bit            4197  1 i915
i2c_core               21552  5 i2c_i801,i915,drm_kms_helper,drm,i2c_algo_bit
video                  17730  1 i915
output                  1625  1 video

[Index of Archives]     [Linux Media Development]     [Asterisk]     [DCCP]     [Netdev]     [X.org]     [Xfree86]     [Fedora Women]     [Linux USB]

  Powered by Linux