Re: Modem will respond to "AT" commands, but that's all

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Trevor,

RE: "Modem: Intel Corporation 82801FB/FBM/FR/FW/FRW "
CLASS=0703
PCIDEV=8086:266d
SUBSYS=103c:0938
IRQ=17
SOFT=8086:266d.MC97
CodecDiagnosed=SIL27
CodecClass=SIL
IDENT=slmodemd
Driver=snd-intel8x0m
------
All this is fine.  But additionally you have to install the package from:
http://packages.ubuntu.com/lucid/sl-modem-daemon
The daemon has the "smarts" for running the modem, while the
snd-intel8x0m is a dumb connection to the modem hardware.
Afterward
$ sudo gedit /etc/default/sl-modem-daemon
to change the COUNTRY  from US to Australia

Also install the package wvdial package, if not already present. Then:
$ sudo wvdialconf
should fine the modem and set up a /etc/wvdial.conf
file.  Edit your personal info therein with:
$ sudo gedit /etc/wvdial.conf

Read the Smartlink related info output by scanModem  for details.

Between dialout sessions, the loaded driver may fail.  Refresh with:
$ sudo modprobe -r snd-intel8x0m
$ sudo modprobe  snd-intel8x0m
which unloads and reloads the driver.

MarvS


On Wed, Jul 24, 2013 at 1:15 AM, Trevor Clarke <tclarke@xxxxxxxxxxx> wrote:
> Seems like it cannot actually operate the connections/hardware to pick up a call, open a line or dial a number.
>
>
> --
> Regards,
>
> Trevor Clarke
>




[Index of Archives]     [Linux Media Development]     [Asterisk]     [DCCP]     [Netdev]     [X.org]     [Xfree86]     [Fedora Women]     [Linux USB]

  Powered by Linux