Re: Onay, Cuba, kernel 3.8.0-19-generic

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Onay,

You are doing the correct procedures.  As far as I am concerned.  What
I believe is happening is that sl-modem-* may be conflicting in that
it has slmodemd+Alsa instead of building slamr.ko + ungrab-winmodem.ko
for your system.  In

The modem symbolic link is /dev/modem -> ttySL0
Distrib_ID=Ubuntu
DistribCodeName=raring


The dkms driver upgrade utilities are installed,

 There are no blacklisted modem drivers in /etc/modprobe*  files

 Potentially useful modem drivers now loaded are:
  snd_atiixp_modem snd_via82xx_modem snd_intel8x0m   snd_hda_intel

The modem drivers now loaded are, these conflict with slamr.ko and are
conflicting.

Marv,

How could Onay fix this problem via sl-modem-src.deb ?  instead of
compiling slmodem-2.9.11-20*.tar.gz sources?

He is following correct procedure as far as I know.  He has dkms
installed, and is following the directions, unless slamr.ko is not
created with newer kernels?  I have not tested this at this time.

Predictive  diagnostics for card in bus 07:01.0:
	Modem chipset  detected on
NAME="Modem: Motorola SM56 Data Fax Modem "
CLASS=0703
PCIDEV=1057:3052
SUBSYS=1057:3020
IRQ=22
IDENT=slamr

 For candidate modem in:  07:01.0
   0703 Modem: Motorola SM56 Data Fax Modem
      Primary device ID:  1057:3052
 Support type needed or chipset:	slamr



 1057:3052 has a Motorola chipset, poorly supported by Motorola itself
 However Zello discovered that drivers written to support Smartlink
modems do support the 1057:3052 chipset!!
 It sufficed to add 1057:3052 to the list of modem cards recognized by
the Smartlink slamr driver.
 There is a ungrab-winmodem driver used in conjunction with slamr,
which must have 1057:3052
 similarly added. See messages from Zello:
 	http://linmodems.technion.ac.il/bigarch/archive-seventh/msg00846.html
 	http://linmodems.technion.ac.il/bigarch/archive-seventh/msg00848.html
 and Alvaro Aguirre about the ungrab-winmodem fix:
	http://linmodems.technion.ac.il/bigarch/archive-seventh/msg00990.html
 For general guidance on ungrab-winmodem + slamr usage, read the
DOCs/Smartlink.txt


There is a package sl-modem-source providing a source code the modem driver  ,
If can be searched for at http://pacakge.ubuntu.com.  After
downloading install under Linux with:
  $ sudo dpkg -i sl*.deb
It is preferable to install the dkms package first.
With DKMS support installed, driver updates with kernel updates will
be automatically done.

The modem is supported by the Smartlink
plus the slmodemd helper utility.  Read the
DOCs/Smartlink.txt and Modem/DOCs/YourSystem.txt for follow through guidance.


For 3.8.0-19-generic compiling drivers is necessary. As of October
2007 the current packages at
http://linmodems.technion.ac.il/packages/smartlink/  are the
ungrab-winmodem-20070505.tar.gz and slmodem-2.9.11-20080126.tar.gz

Best Regards,



Antonio

On 4/30/13, AlexO <vilmaperez@xxxxxxxxxxxxxx> wrote:
> Hi everyone, I need help with a PCI internal Motorola SM-56 Modem. I'm
> currently using Ubuntu 13.04 (32 bits) and the modem doesn't work (it does
> on other operative systems like Windows). Until Ubuntu 12.10 I was using
> the
> procedure of installing packages sl-modem-source, sl-modem-daemon (also
> dkms
> and dependencies) and after a restart, applications like gnome-ppp, kppp
> and
> wvdial were able to see and use the modem correctly, so it worked fine. Now
> with Ubuntu 13.04 I use the same procedure: I install sl-modem source,
> sl-modem-daemon, dkms and all the required dependencies, but gnome-ppp (and
> also kppp and wvdial) keeps telling me that "There's no modem on your
> system", I also tried running gnome-ppp, kppp and wvdial as root, also did
> it from the terminal with sudo and gksu commands (it worked fine on
> previous
> versions of Ubuntu like 12.10, otherwise the modem was not recognized by
> gnome-ppp or wvdial) but now in 13.04 it doesn't work either, scanmodem
> says
> the modem is there (Windows OS sees and uses the modem fine so it's not a
> hardware problem) but Ubuntu 13.04 doesn't work with it. Is it about the
> new
> kernel? Do I have to do something else new to this version of Ubuntu?
> I've attached the ModemData file produced by scanmodem.
> Thank you for your time and help.
> Onay.
>
>
> --
>
> Este mensaje le ha llegado mediante el servicio de correo electronico que
> ofrece Infomed para respaldar el cumplimiento de las misiones del Sistema
> Nacional de Salud. La persona que envia este correo asume el compromiso de
> usar el servicio a tales fines y cumplir con las regulaciones establecidas
>
> Infomed: http://www.sld.cu/
>




[Index of Archives]     [Linux Media Development]     [Asterisk]     [DCCP]     [Netdev]     [X.org]     [Xfree86]     [Fedora Women]     [Linux USB]

  Powered by Linux