Linmodem Driver Help

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi there,

I am excited to stumble upon your website, and thankful for everyone's generous helps.

Please see the attached file for detail.

I look forward to the results.

Thanks!

Grant


 Only plain text email is forwarded by the  Discuss@xxxxxxxxxxxxx List Server,
 as HTML can contain viruses. Use as the email Subject Line:
           YourName, YourCountry  kernel 3.2.0-37-generic 
 With this Subject Line cogent experts will be alerted, and useful case names left in the Archive.
 YourCountry will enable Country specific guidance. Linux experts in YourCountry 
 can be found through: http://www.linux.org/groups/index.html.
They will know your Country's modem code, which may be essential for dialup service.
Responses from Discuss@xxxxxxxxxxxxx are sometimes blocked by an Internet Provider mail filters.
 So in a day, also check the Archived responses at http://www.linmodems.org 
--------------------------  System information ----------------------------
CPU=x86_64,  Ubuntu ,  ALSA_version=1.0.24
Linux version 3.2.0-37-generic (buildd@allspice) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #58-Ubuntu SMP Thu Jan 24 15:28:10 UTC 2013
 scanModem update of:  2011_08_08

Distrib_ID=Ubuntu
DistribCodeName=precise
AptRepositoryStem=http://us.archive.ubuntu.com/ubuntu/


Presently install your Linux Distributions dkms package. It provides for automated driver updates,
following upgrade of your kernel.  For details see http://linux.dell.com/projects.shtml#dkms


Some modem drivers can only be used in 32 bit modem on x86_64 systems,
while some others are competent on x86_64 Systems.  Cases are:
1) http://linmodems.technion.ac.il/bigarch/archive-seventh/msg03119.html 
for the snd-hda-intel audio+modem driver. Also applicable to AC97 modem controllers.
In both cases, 32 bit libraries must be installed to support the slmodemd helper having a precompiled 32 bit component.
2) For USB modems using the slusb.ko driver. 32 bit libraries must be installed to support the slmodemd helper having a precompiled 32 bit component
3) The hsfmodem and hcfpcimodem drivers for Conexant chipsest modes are x86_64 competent.
4) agrsm packages for LSI/AgereSystems softmodems are not competent on x86_64 systems.

 There are no blacklisted modem drivers in /etc/modprobe*  files 

 Potentially useful modem drivers now loaded are:
       snd_hda_intel           

If a USB modem or cellphone is attached and was not detected, please
provide available information in your request to discuss@xxxxxxxxxxxxx

Candidate PCI devices with modem chips are:
04:00.0 Communication controller: LSI Corporation LT WinModem (rev 02)
00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 01)
High Definition Audio cards can host modem chips.

For candidate card in slot 04:00.0, firmware information and bootup diagnostics are:
 PCI slot	PCI ID		SubsystemID	Name
 ----------	---------	---------	--------------
 04:00.0	11c1:044e	1235:044e	Communication controller: LSI Corporation LT WinModem 

 Modem interrupt assignment and sharing: 
 --- Bootup diagnostics for card in PCI slot 04:00.0 ----
[    0.204075] pci 0000:04:00.0: [11c1:044e] type 0 class 0x000780
[    0.204090] pci 0000:04:00.0: reg 10: [mem 0xfebffc00-0xfebffcff]
[    0.204100] pci 0000:04:00.0: reg 14: [io  0xec00-0xec07]
[    0.204110] pci 0000:04:00.0: reg 18: [io  0xe800-0xe8ff]
[    0.204165] pci 0000:04:00.0: supports D2
[    0.204166] pci 0000:04:00.0: PME# supported from D2 D3hot D3cold
[    0.204170] pci 0000:04:00.0: PME# disabled

 The PCI slot 04:00.0 of the modem card may be disabled early in 
 a bootup process,  but then enabled later. If modem drivers load 
 but the  modem is not responsive, read DOCs/Bootup.txt about possible fixes.
 Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx
 if help is needed.
 

For candidate card in slot 00:1b.0, firmware information and bootup diagnostics are:
 PCI slot	PCI ID		SubsystemID	Name
 ----------	---------	---------	--------------
 00:1b.0	8086:27d8	1028:043e	Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller 

 Modem interrupt assignment and sharing: 
 44:        654        656   PCI-MSI-edge      snd_hda_intel
 --- Bootup diagnostics for card in PCI slot 00:1b.0 ----
[    0.196214] pci 0000:00:1b.0: [8086:27d8] type 0 class 0x000403
[    0.196227] pci 0000:00:1b.0: reg 10: [mem 0xfbffc000-0xfbffffff 64bit]
[    0.196283] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.196287] pci 0000:00:1b.0: PME# disabled
[   14.156063] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   14.156111] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[   14.157319] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[   14.237012] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input2
[   14.301672] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input3
[   14.301956] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input4
[   14.302053] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
[   14.302226] input: HDA Intel Line-Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6

 The PCI slot 00:1b.0 of the modem card may be disabled early in 
 a bootup process,  but then enabled later. If modem drivers load 
 but the  modem is not responsive, read DOCs/Bootup.txt about possible fixes.
 Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx
 if help is needed.
 

=== Finished firmware and bootup diagnostics, next deducing cogent software. ===

Predictive  diagnostics for card in bus 04:00.0:
	Modem chipset  detected on
NAME="Communication controller: LSI Corporation LT WinModem "
CLASS=0780
PCIDEV=11c1:044e
SUBSYS=1235:044e
IRQ=14
HDA2=00:1b.0
IDENT=Agere.DSP

 For candidate modem in:  04:00.0
   0780 Communication controller: LSI Corporation LT WinModem 
      Primary device ID:  11c1:044e
 Support type needed or chipset:	Agere.DSP
 


Writing DOCs/Intel.txt


Predictive  diagnostics for card in bus 00:1b.0:
	Modem chipset not detected on
NAME="Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller "
CLASS=0403
PCIDEV=8086:27d8
SUBSYS=1028:043e
IRQ=44

 For candidate modem in:  00:1b.0
   0403 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller 
      Primary device ID:  8086:27d8
 Support type needed or chipset:	
 

 Completed candidate modem analyses.

 The base of the UDEV device file system is: /dev/.udev

 Versions adequately match for the compiler installed: 4.6.3
             and the compiler used in kernel assembly: 4.6

 linux-headers-3.2.0-37-generic resources needed for compiling are not manifestly ready!

 If compiling is necessary packages must be installed, providing:
	 linux-headers-3.2.0-37-generic


If a driver compilation fails, with message including some lack of some FileName.h (stdio.h for example), then
Some additional kernel-header files need installation to /usr/include. The minimal additional packages are libc6-dev
and any of its dependents, under Ubuntu linux-libc-dev

If an alternate ethernet connection is available,
$  apt-get update
$  apt-get -s install linux-kernel-devel
will install needed packages.
For Debian/Ubuntu related distributions, run the following command to display the needed package list:

Otherwise packages have to be found through http://packages.ubuntu.com
Once downloaded and transferred into a Linux partition,
they can be installed alltogether with:
$ sudo dpkg -i *.deb


Checking pppd properties:
	-rwsr-xr-- 1 root dip 325744 Feb  4  2011 /usr/sbin/pppd

In case of an "error 17" "serial loopback" problem, see:
    http://linmodems.technion.ac.il/linmodems/archive-sixth/msg02637.html

To enable dialout without Root permission do:
	$ su - root  (not for Ubuntu)
        sudo chmod a+x /usr/sbin/pppd
or under Ubuntu related Linuxes
	sudo chmod a+x /usr/sbin/pppd

Checking settings of:	/etc/ppp/options
asyncmap 0
noauth
crtscts
lock
hide-password
modem
lcp-echo-interval 30
lcp-echo-failure 4
noipx

In case of a message like:
   Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html

For guidance on FAX usage, get from http://linmodems.technion.ac.il/packages/  get faxing.tar.gz
It has samples for a modem using port /dev/ttySL0, which must be changed to match your modem's port.

Read Modem/DOCs/YourSystem.txt concerning other COMM channels: eth0
Which can interfere with Browser naviagation.

 Don't worry about the following, it is for experts should trouble shooting be necessary.
==========================================================

 Checking for modem support lines:
 --------------------------------------
     /device/modem symbolic link:   
slmodemd created symbolic link /dev/ttySL0:  
     Within /etc/udev/ files:

     Within /etc/modprobe.conf files:

     Within any ancient /etc/devfs files:

     Within ancient kernel 2.4.n /etc/module.conf files:

--------- end modem support lines --------


[Index of Archives]     [Linux Media Development]     [Asterisk]     [DCCP]     [Netdev]     [X.org]     [Xfree86]     [Fedora Women]     [Linux USB]

  Powered by Linux