AllenWalker, USA 3.2.0-32-generic

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Only plain text email is forwarded by the  Discuss@xxxxxxxxxxxxx List Server,
 as HTML can contain viruses. Use as the email Subject Line:
           YourName, YourCountry  kernel 3.2.0-32-generic 
 With this Subject Line cogent experts will be alerted, and useful case names left in the Archive.
 YourCountry will enable Country specific guidance. Linux experts in YourCountry 
 can be found through: http://www.linux.org/groups/index.html.
They will know your Country's modem code, which may be essential for dialup service.
Responses from Discuss@xxxxxxxxxxxxx are sometimes blocked by an Internet Provider mail filters.
 So in a day, also check the Archived responses at http://www.linmodems.org 
--------------------------  System information ----------------------------
CPU=x86_64,  Ubuntu ,  ALSA_version=1.0.24
Linux version 3.2.0-32-generic (buildd@batsu) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #51-Ubuntu SMP Wed Sep 26 21:33:09 UTC 2012
 scanModem update of:  2011_08_08

Distrib_ID=Ubuntu
DistribCodeName=precise
AptRepositoryStem=http://us.archive.ubuntu.com/ubuntu/


The dkms driver upgrade utilities are installed,


Some modem drivers can only be used in 32 bit modem on x86_64 systems,
while some others are competent on x86_64 Systems.  Cases are:
1) http://linmodems.technion.ac.il/bigarch/archive-seventh/msg03119.html 
for the snd-hda-intel audio+modem driver. Also applicable to AC97 modem controllers.
In both cases, 32 bit libraries must be installed to support the slmodemd helper having a precompiled 32 bit component.
2) For USB modems using the slusb.ko driver. 32 bit libraries must be installed to support the slmodemd helper having a precompiled 32 bit component
3) The hsfmodem and hcfpcimodem drivers for Conexant chipsest modes are x86_64 competent.
4) agrsm packages for LSI/AgereSystems softmodems are not competent on x86_64 systems.

 There are no blacklisted modem drivers in /etc/modprobe*  files 

 Potentially useful modem drivers now loaded are:
       snd_hda_intel           

Attached USB devices are:
 ID 045e:0040 Microsoft Corp. Wheel Mouse Optical
 ID 06a3:8020 Saitek PLC Eclipse Keyboard
 ID 051d:0002 American Power Conversion Uninterruptible Power Supply
If a cellphone is not detected, see http://ubuntuforums.org/archive/index.php/t-878554.html
A sample report is:  http://linmodems.technion.ac.il/bigarch/archive-nineth/msg00578.html

If a USB modem or cellphone is attached and was not detected, please
provide available information in your request to discuss@xxxxxxxxxxxxx

Candidate PCI devices with modem chips are:
04:08.0 Serial controller: U.S. Robotics Device 0152 (rev 02)
00:10.1 Audio device: NVIDIA Corporation MCP51 High Definition Audio (rev a2)
01:00.1 Audio device: NVIDIA Corporation High Definition Audio Controller (rev a1)
High Definition Audio cards can host modem chips.

For candidate card in slot 04:08.0, firmware information and bootup diagnostics are:
 PCI slot	PCI ID		SubsystemID	Name
 ----------	---------	---------	--------------
 04:08.0	16ec:0152	13a8:0128	Serial controller: U.S. Robotics Device 0152 

 Modem interrupt assignment and sharing: 
 16:      10905          0   IO-APIC-fasteoi   snd_hda_intel, nvidia
 --- Bootup diagnostics for card in PCI slot 04:08.0 ----
[    0.224164] pci 0000:04:08.0: [16ec:0152] type 0 class 0x000700
[    0.224176] pci 0000:04:08.0: reg 10: [mem 0xcfeff000-0xcfeff3ff]
[    0.532413] serial 0000:04:08.0: PCI INT A -> Link[APC1] -> GSI 16 (level, low) -> IRQ 16
[    0.532435] serial 0000:04:08.0: PCI INT A disabled

 The PCI slot 04:08.0 of the modem card may be disabled early in 
 a bootup process,  but then enabled later. If modem drivers load 
 but the  modem is not responsive, read DOCs/Bootup.txt about possible fixes.
 Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx
 if help is needed.
 

For candidate card in slot 00:10.1, firmware information and bootup diagnostics are:
 PCI slot	PCI ID		SubsystemID	Name
 ----------	---------	---------	--------------
 00:10.1	10de:026c	10de:0162	Audio device: NVIDIA Corporation MCP51 High Definition Audio 

 Modem interrupt assignment and sharing: 
 22:        995          0   IO-APIC-fasteoi   ehci_hcd:usb1, snd_hda_intel
 --- Bootup diagnostics for card in PCI slot 00:10.1 ----
[    0.216411] pci 0000:00:10.1: [10de:026c] type 0 class 0x000403
[    0.216427] pci 0000:00:10.1: reg 10: [mem 0xcfff4000-0xcfff7fff]
[    0.216493] pci 0000:00:10.1: PME# supported from D3hot D3cold
[    0.216497] pci 0000:00:10.1: PME# disabled
[    6.283163] snd_hda_intel 0000:00:10.1: PCI INT B -> Link[APCI] -> GSI 22 (level, low) -> IRQ 22
[    6.283191] snd_hda_intel 0000:00:10.1: setting latency timer to 64
[    8.264161] input: HDA NVidia Line as /devices/pci0000:00/0000:00:10.1/sound/card0/input5
[    8.264267] input: HDA NVidia Front Mic as /devices/pci0000:00/0000:00:10.1/sound/card0/input6
[    8.264369] input: HDA NVidia Rear Mic as /devices/pci0000:00/0000:00:10.1/sound/card0/input7
[    8.264475] input: HDA NVidia Front Headphone as /devices/pci0000:00/0000:00:10.1/sound/card0/input8
[    8.264564] input: HDA NVidia Line-Out Side as /devices/pci0000:00/0000:00:10.1/sound/card0/input9
[    8.264653] input: HDA NVidia Line-Out CLFE as /devices/pci0000:00/0000:00:10.1/sound/card0/input10
[    8.264738] input: HDA NVidia Line-Out Surround as /devices/pci0000:00/0000:00:10.1/sound/card0/input11
[    8.264832] input: HDA NVidia Line-Out Front as /devices/pci0000:00/0000:00:10.1/sound/card0/input12

 The PCI slot 00:10.1 of the modem card may be disabled early in 
 a bootup process,  but then enabled later. If modem drivers load 
 but the  modem is not responsive, read DOCs/Bootup.txt about possible fixes.
 Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx
 if help is needed.
 

For candidate card in slot 01:00.1, firmware information and bootup diagnostics are:
 PCI slot	PCI ID		SubsystemID	Name
 ----------	---------	---------	--------------
 01:00.1	10de:0be3	3842:1302	Audio device: NVIDIA Corporation High Definition Audio Controller 

 Modem interrupt assignment and sharing: 
 16:      10909          0   IO-APIC-fasteoi   snd_hda_intel, nvidia
 --- Bootup diagnostics for card in PCI slot 01:00.1 ----
[    0.216758] pci 0000:01:00.1: [10de:0be3] type 0 class 0x000403
[    0.216768] pci 0000:01:00.1: reg 10: [mem 0xceffc000-0xceffffff]
[    8.265394] snd_hda_intel 0000:01:00.1: PCI INT B -> Link[AXV6] -> GSI 16 (level, low) -> IRQ 16
[    8.265447] snd_hda_intel 0000:01:00.1: setting latency timer to 64
[    9.152149] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card1/input13
[    9.152283] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card1/input14
[    9.152384] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card1/input15
[    9.152489] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card1/input16

=== Finished firmware and bootup diagnostics, next deducing cogent software. ===

A candidate modem is not transparent among the PCI devices:
------------------------------------------------
00:0a.1 SMBus: NVIDIA Corporation MCP51 SMBus (rev a3)
00:0d.0 IDE interface: NVIDIA Corporation MCP51 IDE (rev a1)
00:0e.0 IDE interface: NVIDIA Corporation MCP51 Serial ATA Controller (rev a1)
00:0f.0 IDE interface: NVIDIA Corporation MCP51 Serial ATA Controller (rev a1)
00:10.1 Audio device: NVIDIA Corporation MCP51 High Definition Audio (rev a2)
00:14.0 Bridge: NVIDIA Corporation MCP51 Ethernet Controller (rev a3)
01:00.0 VGA compatible controller: NVIDIA Corporation GT218 [GeForce 8400 GS] (rev a2)
01:00.1 Audio device: NVIDIA Corporation High Definition Audio Controller (rev a1)
04:08.0 Serial controller: U.S. Robotics Device 0152 (rev 02)
------------------------------------------------
 with USB, bridge, and RAM devices not displayed.
If a High Definition Audio card is present, if might be hosted on the Subsystem.

If your modem is an
   external USB type,
   connected by an external serial cable,
   or mounted internally on an ISA card,
then scanModem would not access it. 

Try with Root permission
 $ sudo wvdialconf  /etc/wvdial.conf
 to detect these modem types and some USB modems.
 If the detection is successful, read the DOCs/wvdial.txt .
 Edit the /etc/wvdial.conf with Root permission:
 	sudo  gedit  /etc/wvdial.conf
  will be able to dial out with Root permission:
	sudo wvdial

 Many modems for which scanModem fails have Conexant chips. 
 From http://www.linuxant.com/drivers/modemident.php
 get the ListModem tool, which will report on Conexant chipset modems

 If the above tests fail, please provide any independent information available on your modem.
 If an alternative boot into Microsoft windows can be done, do mouse
clicks on:
   Start > Settings > Control Panel > Classical View (for Window XP) > System
> Hardware > Device Manager > Modems > Click on the + > Modem. Double click to
expand the graphic. Manufacturer information may be displayed. For example, CXT
stands for Conexant. Click the Diagnostics Tab. Record any hardware ID or vendor
and device information. From the Driver Details TAB, copy out the VENdor and DEVice information.
Next do the Query Modem and record the ATI specifications displayed such as:
    ATI3 - Agere SoftModem Version 2.1.22
    ATI5 - 2.1.22, AMR Intel MB, AC97 ID:SIL REV:0x27
Try to identify the modem setup file, with name perhaps MODEM.INF.
If may contain chipset Vendor informaton.


Predictive  diagnostics for card in bus 00:10.1:
	Modem chipset not detected on
NAME="Audio device: NVIDIA Corporation MCP51 High Definition Audio "
CLASS=0403
PCIDEV=10de:026c
SUBSYS=10de:0162
IRQ=22

 For candidate modem in:  00:10.1
   0403 Audio device: NVIDIA Corporation MCP51 High Definition Audio 
      Primary device ID:  10de:026c
 Support type needed or chipset:	
 


Predictive  diagnostics for card in bus 01:00.1:
	Modem chipset not detected on
NAME="Audio device: NVIDIA Corporation High Definition Audio Controller "
CLASS=0403
PCIDEV=10de:0be3
SUBSYS=3842:1302
IRQ=16

 For candidate modem in:  01:00.1
   0403 Audio device: NVIDIA Corporation High Definition Audio Controller 
      Primary device ID:  10de:0be3
 Support type needed or chipset:	
 


Predictive  diagnostics for card in bus 04:08.0:
	Modem chipset not detected on
NAME="Serial controller: U.S. Robotics Device 0152 "
CLASS=0700
PCIDEV=16ec:0152
SUBSYS=13a8:0128
IRQ=16
HDA2=00:10.1
HDA2=01:00.1

 For candidate modem in:  04:08.0
   0700 Serial controller: U.S. Robotics Device 0152 
      Primary device ID:  16ec:0152
 Support type needed or chipset:	
 


 The base of the UDEV device file system is: /dev/.udev

 Versions adequately match for the compiler installed: 4.6.3
             and the compiler used in kernel assembly: 4.6

 linux-headers-3.2.0-32-generic resources needed for compiling are not manifestly ready!

 If compiling is necessary packages must be installed, providing:
	 linux-headers-3.2.0-32-generic
Compressed files at: /usr/src/linux-source-3.2.0.tar.bz2


If a driver compilation fails, with message including some lack of some FileName.h (stdio.h for example), then
Some additional kernel-header files need installation to /usr/include. The minimal additional packages are libc6-dev
and any of its dependents, under Ubuntu linux-libc-dev

If an alternate ethernet connection is available,
$  apt-get update
$  apt-get -s install linux-kernel-devel
will install needed packages.
For Debian/Ubuntu related distributions, run the following command to display the needed package list:

Otherwise packages have to be found through http://packages.ubuntu.com
Once downloaded and transferred into a Linux partition,
they can be installed alltogether with:
$ sudo dpkg -i *.deb


Checking pppd properties:
	-rwsr-xr-- 1 root dip 325744 Feb  4  2011 /usr/sbin/pppd

In case of an "error 17" "serial loopback" problem, see:
    http://linmodems.technion.ac.il/linmodems/archive-sixth/msg02637.html

To enable dialout without Root permission do:
	$ su - root  (not for Ubuntu)
        sudo chmod a+x /usr/sbin/pppd
or under Ubuntu related Linuxes
	sudo chmod a+x /usr/sbin/pppd

Checking settings of:	/etc/ppp/options
asyncmap 0
noauth
crtscts
lock
hide-password
modem
lcp-echo-interval 30
lcp-echo-failure 4
noipx

In case of a message like:
   Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html

For guidance on FAX usage, get from http://linmodems.technion.ac.il/packages/  get faxing.tar.gz
It has samples for a modem using port /dev/ttySL0, which must be changed to match your modem's port.

Read Modem/DOCs/YourSystem.txt concerning other COMM channels: eth0
Which can interfere with Browser naviagation.

 Don't worry about the following, it is for experts should trouble shooting be necessary.
==========================================================

 Checking for modem support lines:
 --------------------------------------
     /device/modem symbolic link:   
slmodemd created symbolic link /dev/ttySL0:  
     Within /etc/udev/ files:

     Within /etc/modprobe.conf files:
/etc/modprobe.d/alsa-base.conf:options snd-atiixp-modem index=-2
/etc/modprobe.d/alsa-base.conf:options snd-via82xx-modem index=-2
/etc/modprobe.d/blacklist-modem.conf:# Uncomment these entries in order to blacklist unwanted modem drivers
/etc/modprobe.d/blacklist-modem.conf:# blacklist snd-atiixp-modem
/etc/modprobe.d/blacklist-modem.conf:# blacklist snd-via82xx-modem
     Within any ancient /etc/devfs files:

     Within ancient kernel 2.4.n /etc/module.conf files:

--------- end modem support lines --------



[Index of Archives]     [Linux Media Development]     [Asterisk]     [DCCP]     [Netdev]     [X.org]     [Xfree86]     [Fedora Women]     [Linux USB]

  Powered by Linux