Re: AllenWalker, USA 3.2.0-32-generic

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



RE: USR2980 PCI controller modem
Install the package wvdial-CurrentVersion.deb
Then the modem should be detected by:
$ sudo wvdialconf
The serial driver is integral to the kernel.
The efax package should be effective.

MarvS

MarvS

On Fri, Oct 26, 2012 at 9:40 PM, Allen Walker <allen@xxxxxxxxxx> wrote:
> Thanks. I need faxsupport. I ordered the USR2980 PCI controller modem. IT
> says it supports linux and is not a softmodem, rather a controller modem.
>
> Will linux auto recognize it since it's a controller modem?
>
> Thanks
>
>
> On Fri, Oct 26, 2012 at 7:43 PM, Marvin Stodolsky
> <marvin.stodolsky@xxxxxxxxx> wrote:
>>
>> Allen
>>
>> Communication controller: LSI Corporation Device 0630 "
>> > CLASS=0780
>> > PCIDEV=11c1:0630
>> -----
>> is not supported under CPU=x86_64 Linux kernels.
>>
>> Should you wish to accept slightly power performance with the x86-32
>> bit series kernels,
>> the modem may be supportable.  But this would require a complete
>> reinstallation of your Ubuntu system.
>>
>> More over there is no guarantee that the modem would thus be
>> supportable, as we have not had a LSI update of the core modem code in
>> several years.   My own system is a X86_64 Macbook, so I cannot myself
>> test whether the modem code will even compile under current kernels.
>>
>> In summary, if you have an alternate ethernet or wireless CONNECT, best
>> use it.
>>
>> MarvS
>> scanModem maintainer
>>
>> On Fri, Oct 26, 2012 at 7:32 PM, Allen Walker <auswalk@xxxxxxxxx> wrote:
>> > --------------------------  System information
>> > ----------------------------
>> > CPU=x86_64,  Ubuntu ,  ALSA_version=1.0.24
>> > Linux version 3.2.0-32-generic (buildd@batsu) (gcc version 4.6.3
>> > (Ubuntu/Linaro 4.6.3-1ubuntu
>> > 5) ) #51-Ubuntu SMP Wed Sep 26 21:33:09 UTC 2012
>> >  scanModem update of:  2011_08_08
>> >
>> > Distrib_ID=Ubuntu
>> > DistribCodeName=precise
>> > AptRepositoryStem=http://us.archive.ubuntu.com/ubuntu/
>> >
>> >
>> > The dkms driver upgrade utilities are installed,
>> >
>> >
>> > Some modem drivers can only be used in 32 bit modem on x86_64 systems,
>> > while some others are competent on x86_64 Systems.  Cases are:
>> > 1) http://linmodems.technion.ac.il/bigarch/archive-seventh/msg03119.html
>> > for the snd-hda-intel audio+modem driver. Also applicable to AC97 modem
>> > controllers.
>> > In both cases, 32 bit libraries must be installed to support the
>> > slmodemd helper having a pre
>> > compiled 32 bit component.
>> > 2) For USB modems using the slusb.ko driver. 32 bit libraries must be
>> > installed to support th
>> > e slmodemd helper having a precompiled 32 bit component
>> > 3) The hsfmodem and hcfpcimodem drivers for Conexant chipsest modes are
>> > x86_64 competent.
>> > 4) agrsm packages for LSI/AgereSystems softmodems are not competent on
>> > x86_64 systems.
>> >
>> >  There are no blacklisted modem drivers in /etc/modprobe*  files
>> >
>> >  Potentially useful modem drivers now loaded are:
>> >        snd_hda_intel
>> >
>> > Attached USB devices are:
>> >  ID 045e:0040 Microsoft Corp. Wheel Mouse Optical
>> >  ID 06a3:8020 Saitek PLC Eclipse Keyboard
>> >  ID 051d:0002 American Power Conversion Uninterruptible Power Supply
>> > If a cellphone is not detected, see
>> > http://ubuntuforums.org/archive/index.php/t-878554.html
>> > A sample report is:
>> > http://linmodems.technion.ac.il/bigarch/archive-nineth/msg00578.html
>> >
>> > If a USB modem or cellphone is attached and was not detected, please
>> > provide available information in your request to discuss@xxxxxxxxxxxxx
>> >
>> > Candidate PCI devices with modem chips are:
>> > 03:00.0 Communication controller: LSI Corporation Device 0630 (rev 01)
>> > 00:10.1 Audio device: NVIDIA Corporation MCP51 High Definition Audio
>> > (rev a2)
>> > 01:00.1 Audio device: NVIDIA Corporation High Definition Audio
>> > Controller (rev a1)
>> > High Definition Audio cards can host modem chips.
>> >
>> > For candidate card in slot 03:00.0, firmware information and bootup
>> > diagnostics are:
>> >  PCI slot       PCI ID          SubsystemID     Name
>> >  ----------     ---------       ---------       --------------
>> >  03:00.0        11c1:0630       11c1:0631       Communication
>> > controller: LSI Corporation Dev
>> > ice 0630
>> >
>> >  Modem interrupt assignment and sharing:
>> >  --- Bootup diagnostics for card in PCI slot 03:00.0 ----
>> > [    0.224131] pci 0000:03:00.0: [11c1:0630] type 0 class 0x000780
>> > [    0.224149] pci 0000:03:00.0: reg 10: [mem 0xcfeff000-0xcfefffff
>> > 64bit]
>> > [    0.224230] pci 0000:03:00.0: PME# supported from D3hot D3cold
>> > [    0.224235] pci 0000:03:00.0: PME# disabled
>> >
>> >  The PCI slot 03:00.0 of the modem card may be disabled early in
>> >  a bootup process,  but then enabled later. If modem drivers load
>> >  but the  modem is not responsive, read DOCs/Bootup.txt about possible
>> > fixes.
>> >  Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx
>> >  if help is needed.
>> >
>> >
>> > For candidate card in slot 00:10.1, firmware information and bootup
>> > diagnostics are:
>> >  PCI slot       PCI ID          SubsystemID     Name
>> >  ----------     ---------       ---------       --------------
>> >  00:10.1        10de:026c       10de:0162       Audio device: NVIDIA
>> > Corporation MCP51 High D
>> > efinition Audio
>> >
>> >  Modem interrupt assignment and sharing:
>> >  22:        997          0   IO-APIC-fasteoi   ehci_hcd:usb1,
>> > snd_hda_intel
>> >  --- Bootup diagnostics for card in PCI slot 00:10.1 ----
>> > [    0.216406] pci 0000:00:10.1: [10de:026c] type 0 class 0x000403
>> > [    0.216422] pci 0000:00:10.1: reg 10: [mem 0xcfff4000-0xcfff7fff]
>> > [    0.216490] pci 0000:00:10.1: PME# supported from D3hot D3cold
>> > [    0.216493] pci 0000:00:10.1: PME# disabled
>> > [    6.084520] snd_hda_intel 0000:00:10.1: PCI INT B -> Link[APCI] ->
>> > GSI 22 (level, low) ->
>> > IRQ 22
>> > [    6.084545] snd_hda_intel 0000:00:10.1: setting latency timer to 64
>> > [    8.124162] input: HDA NVidia Line as
>> > /devices/pci0000:00/0000:00:10.1/sound/card0/input5
>> > [    8.124268] input: HDA NVidia Front Mic as
>> > /devices/pci0000:00/0000:00:10.1/sound/card0/in
>> > put6
>> > [    8.124369] input: HDA NVidia Rear Mic as
>> > /devices/pci0000:00/0000:00:10.1/sound/card0/inp
>> > ut7
>> > [    8.124477] input: HDA NVidia Front Headphone as
>> > /devices/pci0000:00/0000:00:10.1/sound/ca
>> > rd0/input8
>> > [    8.124566] input: HDA NVidia Line-Out Side as
>> > /devices/pci0000:00/0000:00:10.1/sound/card
>> > 0/input9
>> > [    8.124653] input: HDA NVidia Line-Out CLFE as
>> > /devices/pci0000:00/0000:00:10.1/sound/card
>> > 0/input10
>> > [    8.124740] input: HDA NVidia Line-Out Surround as
>> > /devices/pci0000:00/0000:00:10.1/sound/
>> > card0/input11
>> > [    8.124826] input: HDA NVidia Line-Out Front as
>> > /devices/pci0000:00/0000:00:10.1/sound/car
>> > d0/input12
>> >
>> >  The PCI slot 00:10.1 of the modem card may be disabled early in
>> >  a bootup process,  but then enabled later. If modem drivers load
>> >  but the  modem is not responsive, read DOCs/Bootup.txt about possible
>> > fixes.
>> >  Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx
>> >  if help is needed.
>> >
>> >
>> > For candidate card in slot 01:00.1, firmware information and bootup
>> > diagnostics are:
>> >  PCI slot       PCI ID          SubsystemID     Name
>> >  ----------     ---------       ---------       --------------
>> >  01:00.1        10de:0be3       3842:1302       Audio device: NVIDIA
>> > Corporation High Definit
>> > ion Audio Controller
>> >
>> >  Modem interrupt assignment and sharing:
>> >  16:      16277          0   IO-APIC-fasteoi   snd_hda_intel, nvidia
>> >  --- Bootup diagnostics for card in PCI slot 01:00.1 ----
>> > [    0.216754] pci 0000:01:00.1: [10de:0be3] type 0 class 0x000403
>> > [    0.216763] pci 0000:01:00.1: reg 10: [mem 0xceffc000-0xceffffff]
>> > [    8.125382] snd_hda_intel 0000:01:00.1: PCI INT B -> Link[AXV6] ->
>> > GSI 16 (level, low) ->
>> > IRQ 16
>> > [    8.125429] snd_hda_intel 0000:01:00.1: setting latency timer to 64
>> > [    9.024217] input: HDA NVidia HDMI/DP,pcm=9 as
>> > /devices/pci0000:00/0000:00:03.0/0000:01:00
>> > .1/sound/card1/input13
>> > [    9.024335] input: HDA NVidia HDMI/DP,pcm=8 as
>> > /devices/pci0000:00/0000:00:03.0/0000:01:00
>> > .1/sound/card1/input14
>> > [    9.024433] input: HDA NVidia HDMI/DP,pcm=7 as
>> > /devices/pci0000:00/0000:00:03.0/0000:01:00
>> > .1/sound/card1/input15
>> > [    9.024531] input: HDA NVidia HDMI/DP,pcm=3 as
>> > /devices/pci0000:00/0000:00:03.0/0000:01:00
>> > .1/sound/card1/input16
>> >
>> > === Finished firmware and bootup diagnostics, next deducing cogent
>> > software. ===
>> >
>> > Predictive  diagnostics for card in bus 03:00.0:
>> >         Modem chipset  detected on
>> > NAME="Communication controller: LSI Corporation Device 0630 "
>> > CLASS=0780
>> > PCIDEV=11c1:0630
>> > SUBSYS=11c1:0631
>> > IRQ=10
>> > HDA2=00:10.1
>> > HDA2=01:00.1
>> > IDENT=agrsm
>> >
>> >  For candidate modem in:  03:00.0
>> >    0780 Communication controller: LSI Corporation Device 0630
>> >       Primary device ID:  11c1:0630
>> >  Support type needed or chipset:        agrsm
>> >
>> >
>> >
>> >
>> >  There is no agrsm software support for x86_64 systems, through the
>> > modem may be
>> >  supported on Intel/i386 installations, which do more slowly servce
>> > x86_64 processors.
>> >
>> >
>> > The AgereSystems/LSI agrsm code supports compiling of a agrmodem +
>> > agrserial driver pair.
>> > There are a few different chipsets which use this driver pair, but they
>> > use different code re
>> > sources:
>> > Chipsets                        KV*     PackageNames (most current as of
>> > November 2009)
>> >
>> > ---------------------------------------------------------------------------------------------
>> > -
>> > 11c1:048c and 11c1:048f         2.6.29
>> > agrsm048pci-2.1.60_20100108_i386.deb or agrsm048pci-2
>> > .1.60_20100108.tar.gz
>> > 11c1:0620                       2.6.31
>> > agrsm06pci-2.1.80_20100106_i386.deb or agrsm06pci-2.1
>> > .80~20100106.tar.gz !!
>> > 11c11040 (on HDA audio cards)   2.6.31  agrsm-11c11040_20091225_i386.deb
>> > or agrsm-11c11040-2.
>> > 1.80~20091225.tar.bz2  !!
>> >    All available at:
>> > http://linmodems.technion.ac.il/packages/ltmodem/11c11040/
>> > Additionally there are;
>> > automation & testing                    agrsm-tools_0.0.1_all.deb or
>> > agrsm-tools-0.0.1-2.noar
>> > ch.rpm
>> > General background                      agrsm_howto.txt
>> >
>> > ---------------------------------------------------------------------------------------------
>> > ---
>> > * KV == latest kernel release with a reported success
>> > !! Latest update with major credit to  Nikolay Zhuravlev
>> >    But see conflict issue:
>> > http://linmodems.technion.ac.il/bigarch/archive-nineth/msg02753.ht
>> > ml
>> >    For the 11c11040 chip with kernels 2.6.31 and later a change in a
>> > modules loading settingm
>> > ay be necessary.
>> >    Within the file /etc/modprobe.d/alsa-base.conf  (or equivalent for
>> > your Distro), change th
>> > e phrase:
>> >       options snd-hda-intel power_save=10
>> >    to:
>> >       options snd-hda-intel power_save=0
>> >    or the agrsm drivers will not function. For Ubuntu related systems
>> > this can be done with:
>> >    $ sudo gedit /etc/modprobe.d/alsa-base.conf
>> >
>> > Report from  Bjorn Wielens:
>> > Please note- trying to load the modules on a OpenSuSE 11.2 system gives
>> >  an error about the module_version symbol. Using:
>> > # modprobe --force agrmodem
>> > # modprobe --force agrserial
>> > is necessary to load the drivers, and does not appear to cause ill
>> > effects.
>> >
>> >
>> > All of the above packages are dkms competent.  This means that if your
>> > Linux distros dkms pac
>> > kage
>> > is previously installed, if provides for future updates matching
>> > forthcoming kernels.
>> >
>> > -------------- end Agere Systems section -------------------
>> >
>> >
>> > Predictive  diagnostics for card in bus 00:10.1:
>> >         Modem chipset not detected on
>> > NAME="Audio device: NVIDIA Corporation MCP51 High Definition Audio "
>> > CLASS=0403
>> > PCIDEV=10de:026c
>> > SUBSYS=10de:0162
>> > IRQ=22
>> >
>> >  For candidate modem in:  00:10.1
>> >    0403 Audio device: NVIDIA Corporation MCP51 High Definition Audio
>> >       Primary device ID:  10de:026c
>> >  Support type needed or chipset:
>> >
>> >
>> >
>> > Predictive  diagnostics for card in bus 01:00.1:
>> >         Modem chipset not detected on
>> > NAME="Audio device: NVIDIA Corporation High Definition Audio Controller
>> > "
>> > CLASS=0403
>> > PCIDEV=10de:0be3
>> > SUBSYS=3842:1302
>> > IRQ=16
>> >
>> >  For candidate modem in:  01:00.1
>> >    0403 Audio device: NVIDIA Corporation High Definition Audio
>> > Controller
>> >       Primary device ID:  10de:0be3
>> >  Support type needed or chipset:
>> >
>> >
>> >  Completed candidate modem analyses.
>> >
>> >  The base of the UDEV device file system is: /dev/.udev
>> >
>> >  Versions adequately match for the compiler installed: 4.6.3
>> >              and the compiler used in kernel assembly: 4.6
>> >
>> >  linux-headers-3.2.0-32-generic resources needed for compiling are not
>> > manifestly ready!
>> >
>> >  If compiling is necessary packages must be installed, providing:
>> >          linux-headers-3.2.0-32-generic
>> >
>> >
>> > If a driver compilation fails, with message including some lack of some
>> > FileName.h (stdio.h f
>> > or example), then
>> > Some additional kernel-header files need installation to /usr/include.
>> > The minimal additional
>> >  packages are libc6-dev
>> > and any of its dependents, under Ubuntu linux-libc-dev
>> >
>> > If an alternate ethernet connection is available,
>> > $  apt-get update
>> > $  apt-get -s install linux-kernel-devel
>> > will install needed packages.
>> > For Debian/Ubuntu related distributions, run the following command to
>> > display the needed pack
>> > age list:
>> >
>> > Otherwise packages have to be found through http://packages.ubuntu.com
>> > Once downloaded and transferred into a Linux partition,
>> > they can be installed alltogether with:
>> > $ sudo dpkg -i *.deb
>> >
>> >
>> > Checking pppd properties:
>> >         -rwsr-xr-- 1 root dip 325744 Feb  4  2011 /usr/sbin/pppd
>> >
>> > In case of an "error 17" "serial loopback" problem, see:
>> >
>> > http://linmodems.technion.ac.il/linmodems/archive-sixth/msg02637.html
>> >
>> > To enable dialout without Root permission do:
>> >         $ su - root  (not for Ubuntu)
>> >         sudo chmod a+x /usr/sbin/pppd
>> > or under Ubuntu related Linuxes
>> >         sudo chmod a+x /usr/sbin/pppd
>> >
>> > Checking settings of:   /etc/ppp/options
>> > asyncmap 0
>> > noauth
>> > crtscts
>> > lock
>> > hide-password
>> > modem
>> > lcp-echo-interval 30
>> > lcp-echo-failure 4
>> > noipx
>> >
>> > In case of a message like:
>> >    Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
>> > see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html
>> >
>> > For guidance on FAX usage, get from
>> > http://linmodems.technion.ac.il/packages/  get faxing.tar
>> > .gz
>> > It has samples for a modem using port /dev/ttySL0, which must be changed
>> > to match your modem'
>> > s port.
>> >
>> > Read Modem/DOCs/YourSystem.txt concerning other COMM channels: eth0
>> > Which can interfere with Browser naviagation.
>> >
>> >  Don't worry about the following, it is for experts should trouble
>> > shooting be necessary.
>> > ==========================================================
>> >
>> >  Checking for modem support lines:
>> >  --------------------------------------
>> >      /device/modem symbolic link:
>> > slmodemd created symbolic link /dev/ttySL0:
>> >      Within /etc/udev/ files:
>> >
>> >      Within /etc/modprobe.conf files:
>> > /etc/modprobe.d/alsa-base.conf:options snd-atiixp-modem index=-2
>> > /etc/modprobe.d/alsa-base.conf:options snd-via82xx-modem index=-2
>> > /etc/modprobe.d/blacklist-modem.conf:# Uncomment these entries in order
>> > to blacklist unwanted
>> >  modem drivers
>> > /etc/modprobe.d/blacklist-modem.conf:# blacklist snd-atiixp-modem
>> > /etc/modprobe.d/blacklist-modem.conf:# blacklist snd-via82xx-modem
>> >      Within any ancient /etc/devfs files:
>> >
>> >      Within ancient kernel 2.4.n /etc/module.conf files:
>> >
>> > --------- end modem support lines --------
>> >
>
>
>
>
> --
> Twitter: @e_allen_walker


[Index of Archives]     [Linux Media Development]     [Asterisk]     [DCCP]     [Netdev]     [X.org]     [Xfree86]     [Fedora Women]     [Linux USB]

  Powered by Linux