Gillarn Mutale, Zambia Kernel 2.6.28-19-generic

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



           CPU0       
  0:      96261    XT-PIC-XT        timer
  1:         37    XT-PIC-XT        i8042
  2:          0    XT-PIC-XT        cascade
  3:          3    XT-PIC-XT      
  4:          5    XT-PIC-XT      
  5:          3    XT-PIC-XT      
  6:          5    XT-PIC-XT        floppy
  7:          2    XT-PIC-XT        parport0
  8:          0    XT-PIC-XT        rtc0
  9:         68    XT-PIC-XT        acpi
 10:       9836    XT-PIC-XT        ehci_hcd:usb1, uhci_hcd:usb2, uhci_hcd:usb3, uhci_hcd:usb4, yenta, yenta, yenta, radeon@pci:0000:01:00.0
 11:      40808    XT-PIC-XT        Intel 82801DB-ICH4, eth0
 12:     111994    XT-PIC-XT        i8042
 14:      12329    XT-PIC-XT        ata_piix
 15:       5082    XT-PIC-XT        ata_piix
NMI:          0   Non-maskable interrupts
LOC:          0   Local timer interrupts
RES:          0   Rescheduling interrupts
CAL:          0   Function call interrupts
TLB:          0   TLB shootdowns
SPU:          0   Spurious interrupts
ERR:          0
MIS:          0

[    0.000000] BIOS EBDA/lowmem at: 0009fc00/0009fc00
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.28-19-generic (buildd@vernadsky) (gcc version 4.3.3 (Ubuntu 4.3.3-5ubuntu4) ) #66-Ubuntu SMP Sat Oct 16 17:39:04 UTC 2010 (Ubuntu 2.6.28-19.66-generic)
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   NSC Geode by NSC
[    0.000000]   Cyrix CyrixInstead
[    0.000000]   Centaur CentaurHauls
[    0.000000]   Transmeta GenuineTMx86
[    0.000000]   Transmeta TransmetaCPU
[    0.000000]   UMC UMC UMC UMC
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000001ffd0000 (usable)
[    0.000000]  BIOS-e820: 000000001ffd0000 - 000000001fff0c00 (reserved)
[    0.000000]  BIOS-e820: 000000001fff0c00 - 000000001fffc000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000001fffc000 - 0000000020000000 (reserved)
[    0.000000] DMI 2.3 present.
[    0.000000] last_pfn = 0x1ffd0 max_arch_pfn = 0x100000
[    0.000000] Scanning 2 areas for low memory corruption
[    0.000000] modified physical RAM map:
[    0.000000]  modified: 0000000000000000 - 0000000000002000 (usable)
[    0.000000]  modified: 0000000000002000 - 0000000000006000 (reserved)
[    0.000000]  modified: 0000000000006000 - 0000000000007000 (usable)
[    0.000000]  modified: 0000000000007000 - 0000000000010000 (reserved)
[    0.000000]  modified: 0000000000010000 - 0000000000092c00 (usable)
[    0.000000]  modified: 000000000009fc00 - 00000000000a0000 (reserved)
[    0.000000]  modified: 00000000000e0000 - 0000000000100000 (reserved)
[    0.000000]  modified: 0000000000100000 - 000000001ffd0000 (usable)
[    0.000000]  modified: 000000001ffd0000 - 000000001fff0c00 (reserved)
[    0.000000]  modified: 000000001fff0c00 - 000000001fffc000 (ACPI NVS)
[    0.000000]  modified: 000000001fffc000 - 0000000020000000 (reserved)
[    0.000000] kernel direct mapping tables up to 1ffd0000 @ 10000-16000
[    0.000000] RAMDISK: 1f88a000 - 1ffbfb1e
[    0.000000] ACPI: RSDP 000F6F90, 0014 (r0 COMPAQ)
[    0.000000] ACPI: RSDT 1FFF0C84, 002C (r1 HP     HP0890   22040420 CPQ         1)
[    0.000000] ACPI: FACP 1FFF0C00, 0084 (r2 HP     HP0890          2 CPQ         1)
[    0.000000] ACPI: DSDT 1FFF0CB0, 62D9 (r1 HP       nc6000    10000 MSFT  100000E)
[    0.000000] ACPI: FACS 1FFFBE80, 0040
[    0.000000] ACPI: SSDT 1FFF6F89, 028A (r1 COMPAQ  CPQGysr     1001 MSFT  100000E)
[    0.000000] 0MB HIGHMEM available.
[    0.000000] 511MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 1ffd0000
[    0.000000]   low ram: 00000000 - 1ffd0000
[    0.000000]   bootmap 00012000 - 00015ffc
[    0.000000] (9 early reservations) ==> bootmem [0000000000 - 001ffd0000]
[    0.000000]   #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
[    0.000000]   #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
[    0.000000]   #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
[    0.000000]   #3 [0000100000 - 00008780ac]    TEXT DATA BSS ==> [0000100000 - 00008780ac]
[    0.000000]   #4 [001f88a000 - 001ffbfb1e]          RAMDISK ==> [001f88a000 - 001ffbfb1e]
[    0.000000]   #5 [0000879000 - 000087d000]    INIT_PG_TABLE ==> [0000879000 - 000087d000]
[    0.000000]   #6 [000009fc00 - 0000100000]    BIOS reserved ==> [000009fc00 - 0000100000]
[    0.000000]   #7 [0000010000 - 0000012000]          PGTABLE ==> [0000010000 - 0000012000]
[    0.000000]   #8 [0000012000 - 0000016000]          BOOTMAP ==> [0000012000 - 0000016000]
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000000 -> 0x00001000
[    0.000000]   Normal   0x00001000 -> 0x0001ffd0
[    0.000000]   HighMem  0x0001ffd0 -> 0x0001ffd0
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[4] active PFN ranges
[    0.000000]     0: 0x00000000 -> 0x00000002
[    0.000000]     0: 0x00000006 -> 0x00000007
[    0.000000]     0: 0x00000010 -> 0x00000092
[    0.000000]     0: 0x00000100 -> 0x0001ffd0
[    0.000000] On node 0 totalpages: 130901
[    0.000000] free_area_init_node: node 0, pgdat c06cb780, node_mem_map c1000000
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3941 pages, LIFO batch:0
[    0.000000]   Normal zone: 992 pages used for memmap
[    0.000000]   Normal zone: 125936 pages, LIFO batch:31
[    0.000000]   HighMem zone: 0 pages used for memmap
[    0.000000]   Movable zone: 0 pages used for memmap
[    0.000000] ACPI: PM-Timer IO Port: 0x1008
[    0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[    0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic"
[    0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000
[    0.000000] PM: Registered nosave memory: 0000000000007000 - 0000000000010000
[    0.000000] PM: Registered nosave memory: 0000000000092000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[    0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at 30000000 (gap: 20000000:e0000000)
[    0.000000] PERCPU: Allocating 45056 bytes of per cpu data
[    0.000000] NR_CPUS: 64, nr_cpu_ids: 1, nr_node_ids 1
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 129877
[    0.000000] Kernel command line: root=UUID=535c7ef8-b188-463e-bfb7-b4101c6420f7 ro quiet splash 
[    0.000000] Enabling fast FPU save and restore... done.
[    0.000000] Enabling unmasked SIMD FPU exception support... done.
[    0.000000] Initializing CPU#0
[    0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes)
[    0.000000] TSC: PIT calibration matches PMTIMER. 1 loops
[    0.000000] Detected 1594.819 MHz processor.
[    0.004000] Console: colour VGA+ 80x25
[    0.004000] console [tty0] enabled
[    0.004000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.004000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.004000] allocated 2620480 bytes of page_cgroup
[    0.004000] please try cgroup_disable=memory option if you don't want
[    0.004000] Scanning for low memory corruption every 60 seconds
[    0.004000] Memory: 501240k/524096k available (4116k kernel code, 22204k reserved, 2198k data, 532k init, 0k highmem)
[    0.004000] virtual kernel memory layout:
[    0.004000]     fixmap  : 0xffc77000 - 0xfffff000   (3616 kB)
[    0.004000]     pkmap   : 0xff400000 - 0xff800000   (4096 kB)
[    0.004000]     vmalloc : 0xe07d0000 - 0xff3fe000   ( 492 MB)
[    0.004000]     lowmem  : 0xc0000000 - 0xdffd0000   ( 511 MB)
[    0.004000]       .init : 0xc0733000 - 0xc07b8000   ( 532 kB)
[    0.004000]       .data : 0xc05052e1 - 0xc072ae60   (2198 kB)
[    0.004000]       .text : 0xc0100000 - 0xc05052e1   (4116 kB)
[    0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.004000] SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.004011] Calibrating delay loop (skipped), value calculated using timer frequency.. 3189.63 BogoMIPS (lpj=6379276)
[    0.004031] Security Framework initialized
[    0.004040] SELinux:  Disabled at boot.
[    0.004068] AppArmor: AppArmor initialized
[    0.004077] Mount-cache hash table entries: 512
[    0.004230] Initializing cgroup subsys ns
[    0.004235] Initializing cgroup subsys cpuacct
[    0.004238] Initializing cgroup subsys memory
[    0.004243] Initializing cgroup subsys freezer
[    0.004259] CPU: L1 I cache: 32K, L1 D cache: 32K
[    0.004262] CPU: L2 cache: 1024K
[    0.004276] Checking 'hlt' instruction... OK.
[    0.020796] SMP alternatives: switching to UP code
[    0.140469] Freeing SMP alternatives: 18k freed
[    0.140474] ACPI: Core revision 20080926
[    0.143295] ACPI: Checking initramfs for custom DSDT
[    0.518798] ACPI: setting ELCR to 0200 (from 0c00)
[    0.520067] weird, boot CPU (#0) not listedby the BIOS.
[    0.520070] SMP motherboard not detected.
[    0.520073] Local APIC not detected. Using dummy APIC emulation.
[    0.520075] SMP disabled
[    0.520373] Brought up 1 CPUs
[    0.520376] Total of 1 processors activated (3189.63 BogoMIPS).
[    0.520390] CPU0 attaching NULL sched-domain.
[    0.520682] net_namespace: 776 bytes
[    0.520696] HP Compaq Laptop series board detected. Selecting BIOS-method for reboots.
[    0.520701] Booting paravirtualized kernel on bare hardware
[    0.520993] Time:  0:12:12  Date: 01/04/80
[    0.521000] regulator: core version 0.5
[    0.521037] NET: Registered protocol family 16
[    0.521185] EISA bus registered
[    0.521204] ACPI: bus type pci registered
[    0.524373] PCI: PCI BIOS revision 2.10 entry at 0xf031f, last bus=5
[    0.524376] PCI: Using configuration type 1 for base access
[    0.526337] ACPI: EC: Look up EC in DSDT
[    0.547054] ACPI: EC: non-query interrupt received, switching to interrupt mode
[    0.548195] ACPI: Interpreter enabled
[    0.548203] ACPI: (supports S0 S3 S4 S5)
[    0.548222] ACPI: Using PIC for interrupt routing
[    0.559633] ACPI: EC: GPE = 0x10, I/O: command/status = 0x66, data = 0x62
[    0.559636] ACPI: EC: driver started in interrupt mode
[    0.559818] ACPI: No dock devices found.
[    0.559829] ACPI: PCI Root Bridge [C045] (0000:00)
[    0.559877] pci 0000:00:00.0: reg 10 32bit mmio: [0xb0000000-0xbfffffff]
[    0.559981] pci 0000:00:1d.0: reg 20 io port: [0x38c0-0x38df]
[    0.560039] pci 0000:00:1d.1: reg 20 io port: [0x38e0-0x38ff]
[    0.560089] pci 0000:00:1d.2: reg 20 io port: [0x3c00-0x3c1f]
[    0.560146] pci 0000:00:1d.7: reg 10 32bit mmio: [0xa0000000-0xa00003ff]
[    0.560189] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.560194] pci 0000:00:1d.7: PME# disabled
[    0.560275] HPET not enabled in BIOS. You might try hpet=force boot option
[    0.560281] pci 0000:00:1f.0: Enabled i801 SMBus device
[    0.560288] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO
[    0.560292] pci 0000:00:1f.0: quirk: region 1100-113f claimed by ICH4 GPIO
[    0.560313] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07]
[    0.560320] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03]
[    0.560327] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07]
[    0.560334] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03]
[    0.560341] pci 0000:00:1f.1: reg 20 io port: [0x3c20-0x3c2f]
[    0.560349] pci 0000:00:1f.1: reg 24 32bit mmio: [0x000000-0x0003ff]
[    0.560397] pci 0000:00:1f.3: reg 20 io port: [0x1200-0x121f]
[    0.560437] pci 0000:00:1f.5: reg 10 io port: [0x3000-0x30ff]
[    0.560444] pci 0000:00:1f.5: reg 14 io port: [0x3880-0x38bf]
[    0.560451] pci 0000:00:1f.5: reg 18 32bit mmio: [0xa0100000-0xa01001ff]
[    0.560458] pci 0000:00:1f.5: reg 1c 32bit mmio: [0xa0180000-0xa01800ff]
[    0.560479] pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold
[    0.560484] pci 0000:00:1f.5: PME# disabled
[    0.560512] pci 0000:00:1f.6: reg 10 io port: [0x3400-0x34ff]
[    0.560519] pci 0000:00:1f.6: reg 14 io port: [0x3800-0x387f]
[    0.560548] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
[    0.560553] pci 0000:00:1f.6: PME# disabled
[    0.560589] pci 0000:01:00.0: reg 10 32bit mmio: [0x98000000-0x9fffffff]
[    0.560595] pci 0000:01:00.0: reg 14 io port: [0x2000-0x20ff]
[    0.560601] pci 0000:01:00.0: reg 18 32bit mmio: [0x90300000-0x9030ffff]
[    0.560616] pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x01ffff]
[    0.560626] pci 0000:01:00.0: supports D1 D2
[    0.560661] pci 0000:00:01.0: bridge io port: [0x2000-0x2fff]
[    0.560665] pci 0000:00:01.0: bridge 32bit mmio: [0x90300000-0x903fffff]
[    0.560669] pci 0000:00:01.0: bridge 32bit mmio pref: [0x98000000-0x9fffffff]
[    0.560711] pci 0000:02:06.0: reg 10 32bit mmio: [0x90080000-0x90080fff]
[    0.560721] pci 0000:02:06.0: supports D1 D2
[    0.560724] pci 0000:02:06.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.560729] pci 0000:02:06.0: PME# disabled
[    0.560761] pci 0000:02:06.1: reg 10 32bit mmio: [0x90100000-0x90100fff]
[    0.560771] pci 0000:02:06.1: supports D1 D2
[    0.560774] pci 0000:02:06.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.560778] pci 0000:02:06.1: PME# disabled
[    0.560811] pci 0000:02:06.2: reg 10 32bit mmio: [0x90180000-0x90180fff]
[    0.560847] pci 0000:02:06.2: supports D1 D2
[    0.560849] pci 0000:02:06.2: PME# supported from D0 D1 D2 D3hot D3cold
[    0.560854] pci 0000:02:06.2: PME# disabled
[    0.560886] pci 0000:02:06.3: reg 10 32bit mmio: [0x90200000-0x90200fff]
[    0.560897] pci 0000:02:06.3: supports D1 D2
[    0.560899] pci 0000:02:06.3: PME# supported from D0 D1 D2 D3hot D3cold
[    0.560904] pci 0000:02:06.3: PME# disabled
[    0.560968] pci 0000:02:0e.0: reg 10 64bit mmio: [0x90000000-0x9000ffff]
[    0.560995] pci 0000:02:0e.0: reg 30 32bit mmio: [0x000000-0x00ffff]
[    0.561006] pci 0000:02:0e.0: PME# supported from D3hot D3cold
[    0.561010] pci 0000:02:0e.0: PME# disabled
[    0.561037] pci 0000:00:1e.0: transparent bridge
[    0.561044] pci 0000:00:1e.0: bridge 32bit mmio: [0x90000000-0x902fffff]
[    0.561101] bus 00 -> node 0
[    0.561108] ACPI: PCI Interrupt Routing Table [\_SB_.C045._PRT]
[    0.561384] ACPI: PCI Interrupt Routing Table [\_SB_.C045.C046._PRT]
[    0.561508] ACPI: PCI Interrupt Routing Table [\_SB_.C045.C057._PRT]
[    0.573255] ACPI: PCI Interrupt Link [C0C2] (IRQs *10 11)
[    0.573503] ACPI: PCI Interrupt Link [C0C3] (IRQs 10 *11)
[    0.573748] ACPI: PCI Interrupt Link [C0C4] (IRQs *10 11)
[    0.573991] ACPI: PCI Interrupt Link [C0C5] (IRQs *10 11)
[    0.574236] ACPI: PCI Interrupt Link [C0C6] (IRQs 10 *11)
[    0.574469] ACPI: PCI Interrupt Link [C0C7] (IRQs 10 11) *0, disabled.
[    0.574707] ACPI: PCI Interrupt Link [C0C8] (IRQs 10 11) *0, disabled.
[    0.574953] ACPI: PCI Interrupt Link [C0C9] (IRQs *10 11)
[    0.575268] ACPI: Power Resource [C16E] (on)
[    0.575450] ACPI: Power Resource [C13E] (on)
[    0.575650] ACPI: Power Resource [C185] (on)
[    0.575837] ACPI: Power Resource [C18C] (on)
[    0.575884] ACPI: Power Resource [C196] (on)
[    0.575952] ACPI: Power Resource [C0E7] (on)
[    0.576057] ACPI: Power Resource [C202] (off)
[    0.576150] ACPI: Power Resource [C203] (off)
[    0.576242] ACPI: Power Resource [C204] (off)
[    0.576334] ACPI: Power Resource [C205] (off)
[    0.576415] ACPI: WMI: Mapper loaded
[    0.576627] SCSI subsystem initialized
[    0.576672] libata version 3.00 loaded.
[    0.576748] usbcore: registered new interface driver usbfs
[    0.576768] usbcore: registered new interface driver hub
[    0.576797] usbcore: registered new device driver usb
[    0.576926] PCI: Using ACPI for IRQ routing
[    0.577032] Bluetooth: Core ver 2.13
[    0.577032] NET: Registered protocol family 31
[    0.577032] Bluetooth: HCI device and connection manager initialized
[    0.577032] Bluetooth: HCI socket layer initialized
[    0.577032] NET: Registered protocol family 8
[    0.577032] NET: Registered protocol family 20
[    0.577032] NetLabel: Initializing
[    0.577032] NetLabel:  domain hash size = 128
[    0.577032] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.577032] NetLabel:  unlabeled traffic allowed by default
[    0.577032] AppArmor: AppArmor Filesystem Enabled
[    0.577032] pnp: PnP ACPI init
[    0.577032] ACPI: bus type pnp registered
[    0.590165] pnp: PnP ACPI: found 15 devices
[    0.590168] ACPI: ACPI bus type pnp unregistered
[    0.590173] PnPBIOS: Disabled by ACPI PNP
[    0.590183] system 00:00: iomem range 0x0-0x9ffff could not be reserved
[    0.590187] system 00:00: iomem range 0xe0000-0xfffff could not be reserved
[    0.590190] system 00:00: iomem range 0x100000-0x1fffffff could not be reserved
[    0.590202] system 00:0c: ioport range 0x140-0x14f has been reserved
[    0.590205] system 00:0c: iomem range 0xffb00000-0xffbfffff has been reserved
[    0.590209] system 00:0c: iomem range 0xfff00000-0xffffffff has been reserved
[    0.590215] system 00:0d: ioport range 0x4d0-0x4d1 has been reserved
[    0.590218] system 00:0d: ioport range 0x1000-0x107f has been reserved
[    0.590221] system 00:0d: ioport range 0x1100-0x113f has been reserved
[    0.590224] system 00:0d: ioport range 0x1200-0x121f has been reserved
[    0.590228] system 00:0d: iomem range 0xfec00000-0xfec000ff has been reserved
[    0.590234] system 00:0e: iomem range 0xfec01000-0xfec01fff has been reserved
[    0.624975] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[    0.624979] pci 0000:00:01.0:   IO window: 0x2000-0x2fff
[    0.624984] pci 0000:00:01.0:   MEM window: 0x90300000-0x903fffff
[    0.624988] pci 0000:00:01.0:   PREFETCH window: 0x00000098000000-0x0000009fffffff
[    0.625000] pci 0000:02:06.0: CardBus bridge, secondary bus 0000:03
[    0.625003] pci 0000:02:06.0:   IO window: 0x004000-0x0040ff
[    0.625007] pci 0000:02:06.0:   IO window: 0x004400-0x0044ff
[    0.625012] pci 0000:02:06.0:   PREFETCH window: 0x30000000-0x33ffffff
[    0.625017] pci 0000:02:06.0:   MEM window: 0x40000000-0x43ffffff
[    0.625022] pci 0000:02:06.1: CardBus bridge, secondary bus 0000:05
[    0.625024] pci 0000:02:06.1:   IO window: 0x004800-0x0048ff
[    0.625029] pci 0000:02:06.1:   IO window: 0x004c00-0x004cff
[    0.625034] pci 0000:02:06.1:   PREFETCH window: 0x34000000-0x37ffffff
[    0.625038] pci 0000:02:06.1:   MEM window: 0x44000000-0x47ffffff
[    0.625043] pci 0000:02:06.3: CardBus bridge, secondary bus 0000:09
[    0.625046] pci 0000:02:06.3:   IO window: 0x005000-0x0050ff
[    0.625050] pci 0000:02:06.3:   IO window: 0x005400-0x0054ff
[    0.625055] pci 0000:02:06.3:   PREFETCH window: 0x38000000-0x3bffffff
[    0.625060] pci 0000:02:06.3:   MEM window: 0x48000000-0x4bffffff
[    0.625065] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02
[    0.625068] pci 0000:00:1e.0:   IO window: 0x4000-0x5fff
[    0.625074] pci 0000:00:1e.0:   MEM window: 0x90000000-0x902fffff
[    0.625079] pci 0000:00:1e.0:   PREFETCH window: 0x00000030000000-0x0000003dffffff
[    0.625096] pci 0000:00:1e.0: setting latency timer to 64
[    0.625455] ACPI: PCI Interrupt Link [C0C4] enabled at IRQ 10
[    0.625458] PCI: setting IRQ 10 as level-triggered
[    0.625463] pci 0000:02:06.0: PCI INT A -> Link[C0C4] -> GSI 10 (level, low) -> IRQ 10
[    0.625475] pci 0000:02:06.1: PCI INT A -> Link[C0C4] -> GSI 10 (level, low) -> IRQ 10
[    0.625485] pci 0000:02:06.3: PCI INT A -> Link[C0C4] -> GSI 10 (level, low) -> IRQ 10
[    0.625491] bus: 00 index 0 io port: [0x00-0xffff]
[    0.625494] bus: 00 index 1 mmio: [0x000000-0xffffffff]
[    0.625497] bus: 01 index 0 io port: [0x2000-0x2fff]
[    0.625500] bus: 01 index 1 mmio: [0x90300000-0x903fffff]
[    0.625502] bus: 01 index 2 mmio: [0x98000000-0x9fffffff]
[    0.625505] bus: 01 index 3 mmio: [0x0-0x0]
[    0.625507] bus: 02 index 0 io port: [0x4000-0x5fff]
[    0.625510] bus: 02 index 1 mmio: [0x90000000-0x902fffff]
[    0.625513] bus: 02 index 2 mmio: [0x30000000-0x3dffffff]
[    0.625515] bus: 02 index 3 io port: [0x00-0xffff]
[    0.625518] bus: 02 index 4 mmio: [0x000000-0xffffffff]
[    0.625521] bus: 03 index 0 io port: [0x4000-0x40ff]
[    0.625523] bus: 03 index 1 io port: [0x4400-0x44ff]
[    0.625526] bus: 03 index 2 mmio: [0x30000000-0x33ffffff]
[    0.625529] bus: 03 index 3 mmio: [0x40000000-0x43ffffff]
[    0.625531] bus: 05 index 0 io port: [0x4800-0x48ff]
[    0.625534] bus: 05 index 1 io port: [0x4c00-0x4cff]
[    0.625537] bus: 05 index 2 mmio: [0x34000000-0x37ffffff]
[    0.625539] bus: 05 index 3 mmio: [0x44000000-0x47ffffff]
[    0.625542] bus: 09 index 0 io port: [0x5000-0x50ff]
[    0.625544] bus: 09 index 1 io port: [0x5400-0x54ff]
[    0.625547] bus: 09 index 2 mmio: [0x38000000-0x3bffffff]
[    0.625550] bus: 09 index 3 mmio: [0x48000000-0x4bffffff]
[    0.625561] NET: Registered protocol family 2
[    0.625699] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[    0.625999] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[    0.626123] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
[    0.626244] TCP: Hash tables configured (established 16384 bind 16384)
[    0.626247] TCP reno registered
[    0.626331] NET: Registered protocol family 1
[    0.626485] checking if image is initramfs... it is
[    1.128059] Switched to high resolution mode on CPU 0
[    1.401359] Freeing initrd memory: 7382k freed
[    1.401447] cpufreq: No nForce2 chipset.
[    1.401619] audit: initializing netlink socket (disabled)
[    1.401646] type=2000 audit(3471552732.400:1): initialized
[    1.411108] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    1.412863] VFS: Disk quotas dquot_6.5.1
[    1.412943] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    1.413803] fuse init (API version 7.10)
[    1.413918] msgmni has been set to 993
[    1.414160] alg: No test for stdrng (krng)
[    1.414174] io scheduler noop registered
[    1.414176] io scheduler anticipatory registered
[    1.414178] io scheduler deadline registered
[    1.414202] io scheduler cfq registered (default)
[    1.414296] pci 0000:01:00.0: Boot video device
[    1.420696] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.420708] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.422622] ACPI: AC Adapter [C135] (on-line)
[    1.422864] ACPI: Battery Slot [C138] (battery absent)
[    1.423091] ACPI: Battery Slot [C137] (battery absent)
[    1.423178] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[    1.423181] ACPI: Power Button (FF) [PWRF]
[    1.423245] input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
[    1.423248] ACPI: Sleep Button (CM) [C13A]
[    1.423296] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
[    1.423368] ACPI: Lid Switch [C139]
[    1.423592] fan PNP0C0B:00: registered as cooling_device0
[    1.423598] ACPI: Fan [C206] (off)
[    1.423790] fan PNP0C0B:01: registered as cooling_device1
[    1.423797] ACPI: Fan [C207] (off)
[    1.423983] fan PNP0C0B:02: registered as cooling_device2
[    1.423989] ACPI: Fan [C208] (off)
[    1.424192] fan PNP0C0B:03: registered as cooling_device3
[    1.424198] ACPI: Fan [C209] (off)
[    1.424499] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[    1.424520] processor ACPI_CPU:00: registered as cooling_device4
[    1.424524] ACPI: Processor [CPU0] (supports 8 throttling states)
[    1.437613] thermal LNXTHERM:01: registered as thermal_zone0
[    1.444035] ACPI: Thermal Zone [TZ1] (46 C)
[    1.452191] thermal LNXTHERM:02: registered as thermal_zone1
[    1.457953] ACPI: Thermal Zone [TZ2] (26 C)
[    1.462589] thermal LNXTHERM:03: registered as thermal_zone2
[    1.471018] ACPI: Thermal Zone [TZ3] (25 C)
[    1.471075] isapnp: Scanning for PnP cards...
[    1.825037] isapnp: No Plug & Play device found
[    1.826404] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[    1.826494] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    1.826614] serial8250: ttyS2 at I/O 0x3e8 (irq = 4) is a 16550A
[    1.826860] 00:02: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    1.827539] ACPI: PCI Interrupt Link [C0C3] enabled at IRQ 11
[    1.827542] PCI: setting IRQ 11 as level-triggered
[    1.827548] serial 0000:00:1f.6: PCI INT B -> Link[C0C3] -> GSI 11 (level, low) -> IRQ 11
[    1.827556] serial 0000:00:1f.6: PCI INT B disabled
[    1.828356] brd: module loaded
[    1.828731] loop: module loaded
[    1.828812] Fixed MDIO Bus: probed
[    1.828820] PPP generic driver version 2.4.2
[    1.828893] input: Macintosh mouse button emulation as /devices/virtual/input/input3
[    1.828929] Driver 'sd' needs updating - please use bus_type methods
[    1.828943] Driver 'sr' needs updating - please use bus_type methods
[    1.829025] ata_piix 0000:00:1f.1: version 2.12
[    1.829034] ata_piix 0000:00:1f.1: enabling device (0005 -> 0007)
[    1.829040] ata_piix 0000:00:1f.1: PCI INT A -> Link[C0C4] -> GSI 10 (level, low) -> IRQ 10
[    1.829086] ata_piix 0000:00:1f.1: setting latency timer to 64
[    1.829189] scsi0 : ata_piix
[    1.829293] scsi1 : ata_piix
[    1.830152] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x3c20 irq 14
[    1.830155] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x3c28 irq 15
[    1.992571] ata1.00: ATA-6: HTS548020M9AT00, MG1OA53A, max UDMA/100
[    1.992574] ata1.00: 39070080 sectors, multi 16: LBA48 
[    2.008511] ata1.00: configured for UDMA/100
[    2.172325] ata2.00: ATAPI: HL-DT-STDVD-ROM GDR8082N, 0C11, max MWDMA2
[    2.188276] ata2.00: configured for MWDMA2
[    2.188982] scsi 0:0:0:0: Direct-Access     ATA      HTS548020M9AT00  MG1O PQ: 0 ANSI: 5
[    2.189091] sd 0:0:0:0: [sda] 39070080 512-byte hardware sectors: (20.0 GB/18.6 GiB)
[    2.189110] sd 0:0:0:0: [sda] Write Protect is off
[    2.189113] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.189142] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.189212] sd 0:0:0:0: [sda] 39070080 512-byte hardware sectors: (20.0 GB/18.6 GiB)
[    2.189227] sd 0:0:0:0: [sda] Write Protect is off
[    2.189230] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.189256] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.189260]  sda: sda1 sda2 < sda5 >
[    2.244539] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.244592] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    2.250328] scsi 1:0:0:0: CD-ROM            HL-DT-ST DVD-ROM GDR8082N 0C11 PQ: 0 ANSI: 5
[    2.264294] sr0: scsi3-mmc drive: 10x/24x cd/rw xa/form2 cdda tray
[    2.264298] Uniform CD-ROM driver Revision: 3.20
[    2.264409] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    2.264467] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    2.265210] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.265608] ACPI: PCI Interrupt Link [C0C9] enabled at IRQ 10
[    2.265612] ehci_hcd 0000:00:1d.7: PCI INT D -> Link[C0C9] -> GSI 10 (level, low) -> IRQ 10
[    2.265641] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    2.265645] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    2.265722] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    2.269631] ehci_hcd 0000:00:1d.7: debug port 1
[    2.269638] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[    2.269649] ehci_hcd 0000:00:1d.7: irq 10, io mem 0xa0000000
[    2.284027] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    2.284110] usb usb1: configuration #1 chosen from 1 choice
[    2.284143] hub 1-0:1.0: USB hub found
[    2.284152] hub 1-0:1.0: 6 ports detected
[    2.284278] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    2.284298] uhci_hcd: USB Universal Host Controller Interface driver
[    2.284688] ACPI: PCI Interrupt Link [C0C2] enabled at IRQ 10
[    2.284692] uhci_hcd 0000:00:1d.0: PCI INT A -> Link[C0C2] -> GSI 10 (level, low) -> IRQ 10
[    2.284700] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    2.284704] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    2.284752] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    2.284773] uhci_hcd 0000:00:1d.0: irq 10, io base 0x000038c0
[    2.284864] usb usb2: configuration #1 chosen from 1 choice
[    2.284892] hub 2-0:1.0: USB hub found
[    2.284900] hub 2-0:1.0: 2 ports detected
[    2.285342] ACPI: PCI Interrupt Link [C0C5] enabled at IRQ 10
[    2.285346] uhci_hcd 0000:00:1d.1: PCI INT B -> Link[C0C5] -> GSI 10 (level, low) -> IRQ 10
[    2.285353] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    2.285357] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    2.285405] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    2.285426] uhci_hcd 0000:00:1d.1: irq 10, io base 0x000038e0
[    2.285527] usb usb3: configuration #1 chosen from 1 choice
[    2.285556] hub 3-0:1.0: USB hub found
[    2.285563] hub 3-0:1.0: 2 ports detected
[    2.285654] uhci_hcd 0000:00:1d.2: PCI INT C -> Link[C0C4] -> GSI 10 (level, low) -> IRQ 10
[    2.285660] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    2.285664] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    2.285712] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    2.285732] uhci_hcd 0000:00:1d.2: irq 10, io base 0x00003c00
[    2.285836] usb usb4: configuration #1 chosen from 1 choice
[    2.285865] hub 4-0:1.0: USB hub found
[    2.285872] hub 4-0:1.0: 2 ports detected
[    2.286038] PNP: PS/2 Controller [PNP0303:C193,PNP0f13:C194] at 0x60,0x64 irq 1,12
[    2.287859] i8042.c: Detected active multiplexing controller, rev 1.1.
[    2.288583] serio: i8042 KBD port at 0x60,0x64 irq 1
[    2.288590] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    2.288593] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    2.288595] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    2.288598] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    2.288787] mice: PS/2 mouse device common for all mice
[    2.288971] rtc_cmos 00:09: RTC can wake from S4
[    2.289015] rtc_cmos 00:09: rtc core: registered rtc_cmos as rtc0
[    2.289032] rtc0: alarms up to one month, y3k, 114 bytes nvram
[    2.289124] device-mapper: uevent: version 1.0.3
[    2.289259] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@xxxxxxxxxx
[    2.289316] device-mapper: multipath: version 1.0.5 loaded
[    2.289320] device-mapper: multipath round-robin: version 1.0.0 loaded
[    2.289415] EISA: Probing bus 0 at eisa.0
[    2.289423] Cannot allocate resource for EISA slot 1
[    2.289426] Cannot allocate resource for EISA slot 2
[    2.289428] Cannot allocate resource for EISA slot 3
[    2.289431] Cannot allocate resource for EISA slot 4
[    2.289434] Cannot allocate resource for EISA slot 5
[    2.289448] EISA: Detected 0 cards.
[    2.289521] cpuidle: using governor ladder
[    2.289591] cpuidle: using governor menu
[    2.290290] TCP cubic registered
[    2.290428] NET: Registered protocol family 10
[    2.290964] lo: Disabled Privacy Extensions
[    2.291381] NET: Registered protocol family 17
[    2.291400] Bluetooth: L2CAP ver 2.11
[    2.291402] Bluetooth: L2CAP socket layer initialized
[    2.291406] Bluetooth: SCO (Voice Link) ver 0.6
[    2.291408] Bluetooth: SCO socket layer initialized
[    2.291438] Bluetooth: RFCOMM socket layer initialized
[    2.291446] Bluetooth: RFCOMM TTY layer initialized
[    2.291448] Bluetooth: RFCOMM ver 1.10
[    2.291704] IO APIC resources could be not be allocated.
[    2.291748] Using IPI No-Shortcut mode
[    2.291845] registered taskstats version 1
[    2.291984]   Magic number: 0:436:202
[    2.292126] rtc_cmos 00:09: setting system clock to 1980-01-04 00:12:14 UTC (315792734)
[    2.292130] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    2.292132] EDD information not available.
[    2.292491] Freeing unused kernel memory: 532k freed
[    2.292626] Write protecting the kernel text: 4120k
[    2.292670] Write protecting the kernel read-only data: 1524k
[    2.330186] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[    2.808316] Floppy drive(s): fd0 is 1.44M
[    2.828203] FDC 0 is a post-1991 82077
[    2.869039] tg3.c:v3.94 (August 14, 2008)
[    2.869480] ACPI: PCI Interrupt Link [C0C6] enabled at IRQ 11
[    2.869486] tg3 0000:02:0e.0: PCI INT A -> Link[C0C6] -> GSI 11 (level, low) -> IRQ 11
[    2.920321] eth0: Tigon3 [partno(BMC5705mA3) rev 3003 PHY(5705)] (PCI:33MHz:32-bit) 10/100/1000Base-T Ethernet 00:08:02:e8:b0:06
[    2.920327] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[0] TSOcap[1]
[    2.920330] eth0: dma_rwctrl[763f0000] dma_mask[64-bit]
[    3.215430] Marking TSC unstable due to TSC halts in idle
[    3.236577] PM: Starting manual resume from disk
[    3.236581] PM: Resume from partition 8:5
[    3.236583] PM: Checking hibernation image.
[    3.236748] PM: Resume from disk failed.
[    3.239328] EXT3-fs: INFO: recovery required on readonly filesystem.
[    3.239332] EXT3-fs: write access will be enabled during recovery.
[    7.916183] kjournald starting.  Commit interval 5 seconds
[    7.916203] EXT3-fs: recovery complete.
[    7.917629] EXT3-fs: mounted filesystem with ordered data mode.
[   16.217635] udev: starting version 141
[   16.357330] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   16.397989] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:01/device:02/input/input5
[   16.424359] ACPI: Video Device [C0D0] (multi-head: yes  rom: no  post: no)
[   16.828177] Linux agpgart interface v0.103
[   16.854549] intel_rng: FWH not detected
[   17.043285] yenta_cardbus 0000:02:06.0: CardBus bridge found [103c:0890]
[   17.043306] yenta_cardbus 0000:02:06.0: O2: res at 0x94/0xD4: ea/00
[   17.043309] yenta_cardbus 0000:02:06.0: O2: enabling read prefetch/write burst
[   17.070861] parport_pc 00:05: reported by Plug and Play ACPI
[   17.070915] parport0: PC-style at 0x378 (0x778), irq 7, dma 1 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[   17.173033] yenta_cardbus 0000:02:06.0: ISA IRQ mask 0x0038, PCI irq 10
[   17.173039] yenta_cardbus 0000:02:06.0: Socket status: 30000006
[   17.173046] yenta_cardbus 0000:02:06.0: pcmcia: parent PCI bridge I/O window: 0x4000 - 0x5fff
[   17.173050] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x4000-0x5fff: clean.
[   17.173570] yenta_cardbus 0000:02:06.0: pcmcia: parent PCI bridge Memory window: 0x90000000 - 0x902fffff
[   17.173574] yenta_cardbus 0000:02:06.0: pcmcia: parent PCI bridge Memory window: 0x30000000 - 0x3dffffff
[   17.177475] yenta_cardbus 0000:02:06.1: CardBus bridge found [103c:0890]
[   17.190185] input: PC Speaker as /devices/platform/pcspkr/input/input6
[   17.197494] agpgart-intel 0000:00:00.0: Intel 855PM Chipset
[   17.211990] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xb0000000
[   17.215931] ppdev: user-space parallel port driver
[   17.291742] iTCO_vendor_support: vendor-support=0
[   17.294630] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
[   17.294764] iTCO_wdt: Found a ICH4-M TCO device (Version=1, TCOBASE=0x1060)
[   17.294866] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   17.315081] yenta_cardbus 0000:02:06.1: ISA IRQ mask 0x0038, PCI irq 10
[   17.315087] yenta_cardbus 0000:02:06.1: Socket status: 30000006
[   17.315093] pci_bus 0000:02: Raising subordinate bus# of parent bus (#02) from #05 to #08
[   17.315102] yenta_cardbus 0000:02:06.1: pcmcia: parent PCI bridge I/O window: 0x4000 - 0x5fff
[   17.315107] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x4000-0x5fff: clean.
[   17.315629] yenta_cardbus 0000:02:06.1: pcmcia: parent PCI bridge Memory window: 0x90000000 - 0x902fffff
[   17.315633] yenta_cardbus 0000:02:06.1: pcmcia: parent PCI bridge Memory window: 0x30000000 - 0x3dffffff
[   17.330605] yenta_cardbus 0000:02:06.3: CardBus bridge found [103c:0890]
[   17.421876] synaptics was reset on resume, see synaptics_resume_reset if you have trouble on resume
[   17.458143] yenta_cardbus 0000:02:06.3: ISA IRQ mask 0x0038, PCI irq 10
[   17.458149] yenta_cardbus 0000:02:06.3: Socket status: 30000006
[   17.458154] pci_bus 0000:02: Raising subordinate bus# of parent bus (#02) from #08 to #0c
[   17.458163] yenta_cardbus 0000:02:06.3: pcmcia: parent PCI bridge I/O window: 0x4000 - 0x5fff
[   17.458168] pcmcia_socket pcmcia_socket2: cs: IO port probe 0x4000-0x5fff: clean.
[   17.458689] yenta_cardbus 0000:02:06.3: pcmcia: parent PCI bridge Memory window: 0x90000000 - 0x902fffff
[   17.458693] yenta_cardbus 0000:02:06.3: pcmcia: parent PCI bridge Memory window: 0x30000000 - 0x3dffffff
[   17.463582] Intel ICH 0000:00:1f.5: power state changed by ACPI to D0
[   17.463595] Intel ICH 0000:00:1f.5: PCI INT B -> Link[C0C3] -> GSI 11 (level, low) -> IRQ 11
[   17.463677] Intel ICH 0000:00:1f.5: setting latency timer to 64
[   17.624218] Clocksource tsc unstable (delta = -125497115 ns)
[   18.297331] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x100-0x3af: clean.
[   18.299079] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x3e0-0x4ff: clean.
[   18.299804] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x820-0x8ff: clean.
[   18.300464] pcmcia_socket pcmcia_socket1: cs: IO port probe 0xc00-0xcf7: clean.
[   18.301279] pcmcia_socket pcmcia_socket1: cs: IO port probe 0xa00-0xaff: clean.
[   18.302515] pcmcia_socket pcmcia_socket2: cs: IO port probe 0x100-0x3af: clean.
[   18.304281] pcmcia_socket pcmcia_socket2: cs: IO port probe 0x3e0-0x4ff: clean.
[   18.305032] pcmcia_socket pcmcia_socket2: cs: IO port probe 0x820-0x8ff: clean.
[   18.305679] pcmcia_socket pcmcia_socket2: cs: IO port probe 0xc00-0xcf7: clean.
[   18.306494] pcmcia_socket pcmcia_socket2: cs: IO port probe 0xa00-0xaff: clean.
[   18.308185] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean.
[   18.309930] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: clean.
[   18.310655] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
[   18.311292] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
[   18.312133] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
[   18.388031] intel8x0_measure_ac97_clock: measured 55211 usecs
[   18.388034] intel8x0: clocking to 48000
[   18.505559] Synaptics Touchpad, model: 1, fw: 5.9, id: 0x1b6eb1, caps: 0xa84793/0x100000
[   18.505566] serio: Synaptics pass-through port at isa0060/serio4/input0
[   18.548716] lp0: using parport0 (interrupt-driven).
[   18.552863] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input7
[   18.671236] Adding 1494004k swap on /dev/sda5.  Priority:-1 extents:1 across:1494004k
[   19.208029] EXT3 FS on sda1, internal journal
[   20.325663] type=1505 audit(315792752.531:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=2010
[   20.443672] type=1505 audit(315792752.647:3): operation="profile_load" name="/sbin/dhclient-script" name2="default" pid=2014
[   20.443884] type=1505 audit(315792752.647:4): operation="profile_load" name="/sbin/dhclient3" name2="default" pid=2014
[   20.443956] type=1505 audit(315792752.647:5): operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" name2="default" pid=2014
[   20.444054] type=1505 audit(315792752.651:6): operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" name2="default" pid=2014
[   20.635341] type=1505 audit(315792752.839:7): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=2019
[   20.635691] type=1505 audit(315792752.839:8): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=2019
[   20.672808] type=1505 audit(315792752.879:9): operation="profile_load" name="/usr/sbin/tcpdump" name2="default" pid=2023
[   24.011100] RPC: Registered udp transport module.
[   24.011104] RPC: Registered tcp transport module.
[   24.336856] Installing knfsd (copyright (C) 1996 okir@xxxxxxxxxxxx).
[   24.453539] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[   24.469804] NFSD: starting 90-second grace period
[   29.293790] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   29.293794] Bluetooth: BNEP filters: protocol multicast
[   29.318198] Bridge firewalling registered
[   30.573913] pci 0000:01:00.0: PCI INT A -> Link[C0C2] -> GSI 10 (level, low) -> IRQ 10
[   30.997546] [drm] Initialized drm 1.1.0 20060810
[   31.058873] [drm] Initialized radeon 1.29.0 20080528 on minor 0
[   31.277259] agpgart-intel 0000:00:00.0: AGP 2.0 bridge
[   31.277280] agpgart-intel 0000:00:00.0: putting AGP V2 device into 4x mode
[   31.277319] pci 0000:01:00.0: putting AGP V2 device into 4x mode
[   31.756574] [drm] Setting GART location based on new memory map
[   31.756584] [drm] Loading R300 Microcode
[   31.756633] [drm] Num pipes: 1
[   31.756643] [drm] writeback test succeeded in 2 usecs
[   35.098409] ADDRCONF(NETDEV_UP): eth0: link is not ready
[  437.272102] usb 1-1: new high speed USB device using ehci_hcd and address 2
[  437.839929] usb 1-1: configuration #1 chosen from 1 choice
[  437.914452] Initializing USB Mass Storage driver...
[  437.940505] scsi2 : SCSI emulation for USB Mass Storage devices
[  437.941469] usb-storage: device found at 2
[  437.941473] usb-storage: waiting for device to settle before scanning
[  437.941747] scsi3 : SCSI emulation for USB Mass Storage devices
[  437.945249] usbcore: registered new interface driver usb-storage
[  437.945256] USB Mass Storage support registered.
[  437.990723] usb-storage: device found at 2
[  437.990728] usb-storage: waiting for device to settle before scanning
[  442.940453] usb-storage: device scan complete
[  442.941179] scsi 2:0:0:0: CD-ROM            HUAWEI   Mass Storage     2.31 PQ: 0 ANSI: 2
[  443.025365] sr1: scsi-1 drive
[  443.025640] sr 2:0:0:0: Attached scsi CD-ROM sr1
[  443.025818] sr 2:0:0:0: Attached scsi generic sg2 type 5
[  443.058015] usb-storage: device scan complete
[  443.058999] scsi 3:0:0:0: Direct-Access     HUAWEI   SD Storage       2.31 PQ: 0 ANSI: 2
[  443.061095] sd 3:0:0:0: [sdb] Attached SCSI removable disk
[  443.061199] sd 3:0:0:0: Attached scsi generic sg3 type 0
[  450.451357] ISO 9660 Extensions: Microsoft Joliet Level 1
[  450.452620] ISOFS: changing to secondary root

Module                  Size  Used by
isofs                  39844  1 
usb_storage            99648  1 
binfmt_misc            16776  1 
radeon                342816  2 
drm                    96424  3 radeon
bridge                 56212  0 
stp                    10500  1 bridge
bnep                   20224  2 
nfsd                  228012  13 
lockd                  74284  1 nfsd
nfs_acl                11136  1 nfsd
auth_rpcgss            42144  1 nfsd
sunrpc                195552  13 nfsd,lockd,nfs_acl,auth_rpcgss
exportfs               12416  1 nfsd
input_polldev          11912  0 
joydev                 18368  0 
lp                     17156  0 
pcmcia                 44748  0 
snd_intel8x0           37532  4 
snd_ac97_codec        112292  1 snd_intel8x0
ac97_bus                9856  1 snd_ac97_codec
snd_pcm_oss            46336  0 
snd_mixer_oss          22656  1 snd_pcm_oss
snd_pcm                83076  4 snd_intel8x0,snd_ac97_codec,snd_pcm_oss
snd_seq_dummy          10756  0 
snd_seq_oss            37760  0 
snd_seq_midi           14336  0 
snd_rawmidi            29696  1 snd_seq_midi
snd_seq_midi_event     15104  2 snd_seq_oss,snd_seq_midi
snd_seq                56880  6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
snd_timer              29704  2 snd_pcm,snd_seq
snd_seq_device         14988  5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
iTCO_wdt               19108  0 
iTCO_vendor_support    11652  1 iTCO_wdt
psmouse                61972  0 
ppdev                  15620  0 
intel_agp              34108  1 
pcspkr                 10496  0 
serio_raw              13444  0 
snd                    62756  17 snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
soundcore              15200  1 snd
snd_page_alloc         16904  2 snd_intel8x0,snd_pcm
parport_pc             40100  1 
yenta_socket           32396  3 
rsrc_nonstatic         19328  1 yenta_socket
pcmcia_core            43540  3 pcmcia,yenta_socket,rsrc_nonstatic
agpgart                42696  2 drm,intel_agp
parport                42220  3 lp,ppdev,parport_pc
video                  25872  0 
output                 11008  1 video
shpchp                 40212  0 
tg3                   131204  0 
floppy                 64324  0 
fbcon                  46112  0 
tileblit               10752  1 fbcon
font                   16384  1 fbcon
bitblit                13824  1 fbcon
softcursor              9984  1 bitblit
 Only plain text email is forwarded by the  Discuss@xxxxxxxxxxxxx List Server,
 as HTML can contain viruses. Use as the email Subject Line:
           YourName, YourCountry  kernel 2.6.28-19-generic 
 With this Subject Line cogent experts will be alerted, and useful case names left in the Archive.
 YourCountry will enable Country specific guidance. Linux experts in YourCountry 
 can be found through: http://www.linux.org/groups/index.html.
They will know your Country's modem code, which may be essential for dialup service.
Responses from Discuss@xxxxxxxxxxxxx are sometimes blocked by an Internet Provider mail filters.
 So in a day, also check the Archived responses at http://www.linmodems.org 
--------------------------  System information ----------------------------
CPU=i686,  Ubuntu ,  ALSA_version=1.0.18
Linux version 2.6.28-19-generic (buildd@vernadsky) (gcc version 4.3.3 (Ubuntu 4.3.3-5ubuntu4) ) #66-Ubuntu SMP Sat Oct 16 17:39:04 UTC 2010
 scanModem update of:  2011_08_08

Distrib_ID=Ubuntu
DistribCodeName=jaunty
AptRepositoryStem=deb http://ie.archive.ubuntu.com/ubuntu


The dkms driver upgrade utilities are installed,

 There are no blacklisted modem drivers in /etc/modprobe*  files 

 Potentially useful modem drivers now loaded are:
                  

Attached USB devices are:
 ID 12d1:1c0b Huawei Technologies Co., Ltd. 
If a cellphone is not detected, see http://ubuntuforums.org/archive/index.php/t-878554.html
A sample report is:  http://linmodems.technion.ac.il/bigarch/archive-nineth/msg00578.html

If a USB modem or cellphone is attached and was not detected, please
provide available information in your request to discuss@xxxxxxxxxxxxx

Candidate PCI devices with modem chips are:
00:1f.6 Modem: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Modem Controller (rev 03)
High Definition Audio cards can host modem chips.

For candidate card in slot 00:1f.6, firmware information and bootup diagnostics are:
 PCI slot	PCI ID		SubsystemID	Name
 ----------	---------	---------	--------------
 00:1f.6	8086:24c6	103c:0890	Modem: Intel Corporation 82801DB/DBL/DBM 

 Modem interrupt assignment and sharing: 
 11:      40794    XT-PIC-XT        Intel 82801DB-ICH4, eth0
 --- Bootup diagnostics for card in PCI slot 00:1f.6 ----
[    0.560512] pci 0000:00:1f.6: reg 10 io port: [0x3400-0x34ff]
[    0.560519] pci 0000:00:1f.6: reg 14 io port: [0x3800-0x387f]
[    0.560548] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
[    0.560553] pci 0000:00:1f.6: PME# disabled
[    1.827548] serial 0000:00:1f.6: PCI INT B -> Link[C0C3] -> GSI 11 (level, low) -> IRQ 11
[    1.827556] serial 0000:00:1f.6: PCI INT B disabled

 The PCI slot 00:1f.6 of the modem card may be disabled early in 
 a bootup process,  but then enabled later. If modem drivers load 
 but the  modem is not responsive, read DOCs/Bootup.txt about possible fixes.
 Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx
 if help is needed.
 


[Index of Archives]     [Linux Media Development]     [Asterisk]     [DCCP]     [Netdev]     [X.org]     [Xfree86]     [Fedora Women]     [Linux USB]

  Powered by Linux