Mike C, USA, CentOS release 6.2 (Final) Kernel kernel 2.6.32-220.23.1.el6.x86_64

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Sorry I do not understand this better, but I am not sure where to
start...
I have a Lenovo (IBM) Thinkpad X61s with an internal Intel modem
Looks like the modem Chipset is the PM965
It is located in PCI slot 3.0

I can see the message: "pci 0000:00:03.0: PME# disabled"  in the Dmesg,
but I am not sure if it is relevant.  I assume it is.

I assume I will need to find a driver, but no idea how to find it.

Bsaed on the file below:
	Does it appear I have a modem that can work or am I done at the
start?
	If it can work, does it look like I just need the proper
configuration or do I need to compile drivers, etc.?

Any help is much appreciated.
Please let me know if you need more information.
Thanks,
Mike C.


ModemData.Txt:-------------------------


Only plain text email is forwarded by the  Discuss@xxxxxxxxxxxxx List
Server,
 as HTML can contain viruses. Use as the email Subject Line:
           YourName, YourCountry CentOS release 6.2 (Final)
Kernel  kernel 2.6.32-220.23.1.el6.x86_64 
 With this Subject Line cogent experts will be alerted, and useful case
names left in the Archive.
 YourCountry will enable Country specific guidance. Linux experts in
YourCountry 
 can be found through: http://www.linux.org/groups/index.html.
They will know your Country's modem code, which may be essential for
dialup service.
Responses from Discuss@xxxxxxxxxxxxx are sometimes blocked by an
Internet Provider mail filters.
 So in a day, also check the Archived responses at
http://www.linmodems.org 
--------------------------  System information
----------------------------
CPU=x86_64,  CentOS
Kernel ,  ALSA_version=1.0.21
Linux version 2.6.32-220.23.1.el6.x86_64
(mockbuild@xxxxxxxxxxxxxxxxxxxxxxxx) (gcc version 4.4.6 20110731 (Red
Hat 4.4.6-3) (GCC) ) #1 SMP Mon Jun 18 18:58:52 BST 2012
 scanModem update of:  2011_08_08

/etc/lsb-release not found


Presently install your Linux Distributions dkms package. It provides for
automated driver updates,
following upgrade of your kernel.  For details see
http://linux.dell.com/projects.shtml#dkms


Some modem drivers can only be used in 32 bit modem on x86_64 systems,
while some others are competent on x86_64 Systems.  Cases are:
1) http://linmodems.technion.ac.il/bigarch/archive-seventh/msg03119.html

for the snd-hda-intel audio+modem driver. Also applicable to AC97 modem
controllers.
In both cases, 32 bit libraries must be installed to support the
slmodemd helper having a precompiled 32 bit component.
2) For USB modems using the slusb.ko driver. 32 bit libraries must be
installed to support the slmodemd helper having a precompiled 32 bit
component
3) The hsfmodem and hcfpcimodem drivers for Conexant chipsest modes are
x86_64 competent.
4) agrsm packages for LSI/AgereSystems softmodems are not competent on
x86_64 systems.

 There are no blacklisted modem drivers in /etc/modprobe*  files 

 Potentially useful modem drivers now loaded are:
       snd_hda_intel           

Attached USB devices are:
 ID 17ef:1000 Lenovo 
 ID 0a5c:2110 Broadcom Corp. Bluetooth Controller
 ID 0483:2016 SGS Thomson Microelectronics Fingerprint Reader
 ID 0424:2514 Standard Microsystems Corp. USB 2.0 Hub
 ID 058f:9254 Alcor Micro Corp. Hub
 ID 04b4:2324 Cypress Semiconductor Corp. 
 ID 045e:0040 Microsoft Corp. Wheel Mouse Optical
 ID 0aec:3260 Neodio Technologies Corp. 7-in-1 Card Reader
 ID 06e1:d804 ADS Technologies, Inc. 
 ID 8086:0630 Intel Corp. Pocket PC Camera
If a cellphone is not detected, see
http://ubuntuforums.org/archive/index.php/t-878554.html
A sample report is:
http://linmodems.technion.ac.il/bigarch/archive-nineth/msg00578.html

If a USB modem or cellphone is attached and was not detected, please
provide available information in your request to discuss@xxxxxxxxxxxxx

Candidate PCI devices with modem chips are:
00:03.0 Communication controller: Intel Corporation Mobile PM965/GM965
MEI Controller (rev 0c)
00:03.3 Serial controller: Intel Corporation Mobile PM965/GM965 KT
Controller (rev 0c)
00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio
Controller (rev 03)
High Definition Audio cards can host modem chips.

For candidate card in slot 00:03.0, firmware information and bootup
diagnostics are:
 PCI slot	PCI ID		SubsystemID	Name
 ----------	---------	---------	--------------
 00:03.0	8086:2a04	17aa:20d1	Communication
controller: Intel Corporation Mobile PM965/GM965 MEI Controller 

 Modem interrupt assignment and sharing: 
 --- Bootup diagnostics for card in PCI slot 00:03.0 ----
pci 0000:00:03.0: reg 10 64bit mmio: [0xfe226000-0xfe22600f]
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: PME# disabled
pci 0000:03:00.0: reg 10 64bit mmio: [0xfdf00000-0xfdf01fff]
pci 0000:03:00.0: PME# supported from D0 D3hot D3collsd
pci 0000:03:00.0: PME# disabled
iwlagn 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
iwlagn 0000:03:00.0: setting latency timer to 64
iwlagn 0000:03:00.0: Detected Intel(R) Wireless WiFi Link 4965AGN,
REV=0x4
iwlagn 0000:03:00.0: device EEPROM VER=0x36, CALIB=0x5
iwlagn 0000:03:00.0: Tunable channels: 11 802.11bg, 13 802.11a channels
iwlagn 0000:03:00.0: irq 29 for MSI/MSI-X
iwlagn 0000:03:00.0: firmware: requesting iwlwifi-4965-2.ucode
iwlagn 0000:03:00.0: loaded firmware version 228.61.2.24

 The PCI slot 00:03.0 of the modem card may be disabled early in 
 a bootup process,  but then enabled later. If modem drivers load 
 but the  modem is not responsive, read DOCs/Bootup.txt about possible
fixes.
 Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx
 if help is needed.
 

For candidate card in slot 00:03.3, firmware information and bootup
diagnostics are:
 PCI slot	PCI ID		SubsystemID	Name
 ----------	---------	---------	--------------
 00:03.3	8086:2a07	17aa:20d4	Serial controller: Intel
Corporation Mobile PM965/GM965 KT Controller 

 Modem interrupt assignment and sharing: 
 17:         85         14   IO-APIC-fasteoi   uhci_hcd:usb6,
firewire_ohci
 --- Bootup diagnostics for card in PCI slot 00:03.3 ----
pci 0000:00:03.3: reg 10 io port: [0x1830-0x1837]
pci 0000:00:03.3: reg 14 32bit mmio: [0xfe224000-0xfe224fff]
serial 0000:00:03.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
0000:00:03.3: ttyS1 at I/O 0x1830 (irq = 17) is a 16550A

For candidate card in slot 00:1b.0, firmware information and bootup
diagnostics are:
 PCI slot	PCI ID		SubsystemID	Name
 ----------	---------	---------	--------------
 00:1b.0	8086:284b	17aa:20ac	Audio device: Intel
Corporation 82801H 

 Modem interrupt assignment and sharing: 
 28:       1649        288   PCI-MSI-edge      hda_intel
 --- Bootup diagnostics for card in PCI slot 00:1b.0 ----
pci 0000:00:1b.0: reg 10 64bit mmio: [0xfe220000-0xfe223fff]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17
HDA Intel 0000:00:1b.0: irq 28 for MSI/MSI-X
HDA Intel 0000:00:1b.0: setting latency timer to 64

 The PCI slot 00:1b.0 of the modem card may be disabled early in 
 a bootup process,  but then enabled later. If modem drivers load 
 but the  modem is not responsive, read DOCs/Bootup.txt about possible
fixes.
 Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx
 if help is needed.
 


===== Advanced Linux Sound Architecture (ALSA) diagnostics ===== 
The ALSA packages provide audio support and also drivers for some
modems.
ALSA diagnostics are written during bootup to /proc/asound/ folders.

The modem cards detected by "aplay -l"  are: None


The /proc/asound/pcm file reports:
-----------------------
00-00: AD198x Analog : AD198x Analog : playback 1 : capture 2
00-01: AD198x Digital : AD198x Digital : playback 1

about /proc/asound/cards:
------------------------
 0 [Intel          ]: HDA-Intel - HDA Intel
                      HDA Intel at 0xfe220000 irq 28

 PCI slot 00:1b.0 has a High Definition Audio Card
 The drivers are in the kernel modules tree at:
 
/lib/modules/2.6.32-220.el6.x86_64/kernel/sound/pci/hda/snd-hda-intel.ko
/lib/modules/2.6.32-220.17.1.el6.x86_64/kernel/sound/pci/hda/snd-hda-int
el.ko
/lib/modules/2.6.32-220.23.1.el6.x86_64/kernel/sound/pci/hda/snd-hda-int
el.ko

 The HDA diagnostics did not recognize a modem chip on the audio
subsystem,
 though a Conexant chip modem might not be recognized.

=== Finished firmware and bootup diagnostics, next deducing cogent
software. ===

Predictive  diagnostics for card in bus 00:03.3:
	Modem chipset  detected on
NAME="Serial controller: Intel Corporation Mobile PM965/GM965 KT
Controller "
CLASS=0700
PCIDEV=8086:2a07
SUBSYS=17aa:20d4
IRQ=17
SOFT=8086:2a07.MC97
IDENT=mc97

 For candidate modem in:  00:03.3
   0700 Serial controller: Intel Corporation Mobile PM965/GM965 KT
Controller 
      Primary device ID:  8086:2a07
    Subsystem PCI_id  17aa:20d4 
    Softmodem codec or chipset from diagnostics: 
                               from    Archives: 
                        
      


The soft modem is in the ac97/mc97 category. However the diagnostics
were not effective,
and an archival record for is lacking for the modem codec of pair:
	8086:2a07 17aa:20d4
Try to acquire more information by running the modem diagnostics under a
Microsoft boot,
as described in SoftModem.txt


Writing DOCs/Intel.txt


Predictive  diagnostics for card in bus 00:03.0:
	Modem chipset not detected on
NAME="Communication controller: Intel Corporation Mobile PM965/GM965 MEI
Controller "
CLASS=0780
PCIDEV=8086:2a04
SUBSYS=17aa:20d1
IRQ=10
HDA2=00:1b.0

 For candidate modem in:  00:03.0
   0780 Communication controller: Intel Corporation Mobile PM965/GM965
MEI Controller 
      Primary device ID:  8086:2a04
 Support type needed or chipset:	
 


Predictive  diagnostics for card in bus 00:1b.0:
	Modem chipset not detected on
NAME="Audio device: Intel Corporation 82801H "
CLASS=0403
PCIDEV=8086:284b
SUBSYS=17aa:20ac
IRQ=28

 For candidate modem in:  00:1b.0
   0403 Audio device: Intel Corporation 82801H 
      Primary device ID:  8086:284b
 Support type needed or chipset:	
 

 Completed candidate modem analyses.

 The base of the UDEV device file system is: /dev/.udev

 Versions adequately match for the compiler installed: 4.4.6
             and the compiler used in kernel assembly: 4.4.6


 
 Minimal compiling resources appear complete:
   make utility - /usr/bin/make
   Compiler version 4.4
   linuc_headers base folder
/lib/modules/2.6.32-220.23.1.el6.x86_64/build

 However some compilations and executable functions may need additional
files,
 in the FileNames.h (so called kernel "h"eaders) collection installed in
/usr/include/ .
 For martian_modem, additional required packages are needed. The also
required headers of package libc6 are commonly installed by default. 
 Compiling hsfmodem drivers does require linux-libc-dev and libc6-dev
packages, for kernels 2.6.24 and later versions.
 In not included on your install CD, search for them at
http://packages.ubuntu.com
 or comparable Repository for other Linux distros.
 When compiling ALSA drivers, the utility "patch" will also be needed.




If a driver compilation fails, with message including some lack of some
FileName.h (stdio.h for example), then
Some additional kernel-header files need installation to /usr/include.
The minimal additional packages are libc6-dev
and any of its dependents, under Ubuntu linux-libc-dev

If an alternate ethernet connection is available,
$  apt-get update
$  apt-get -s install linux-kernel-devel
will install needed packages.
For Debian/Ubuntu related distributions, run the following command to
display the needed package list:

Otherwise packages have to be found through http://packages.ubuntu.com
Once downloaded and transferred into a Linux partition,
they can be installed alltogether with:
$ sudo dpkg -i *.deb


Checking pppd properties:
	-r-xr-xr-x. 1 root root 359592 Aug 22  2010 /usr/sbin/pppd

In case of an "error 17" "serial loopback" problem, see:
 
http://linmodems.technion.ac.il/linmodems/archive-sixth/msg02637.html

To enable dialout without Root permission do:
	$ su - root  (not for Ubuntu)
         chmod a+x /usr/sbin/pppd
or under Ubuntu related Linuxes
	 chmod a+x /usr/sbin/pppd

Checking settings of:	/etc/ppp/options
lock

In case of a message like:
   Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html

For guidance on FAX usage, get from
http://linmodems.technion.ac.il/packages/  get faxing.tar.gz
It has samples for a modem using port /dev/ttySL0, which must be changed
to match your modem's port.

Read Modem/DOCs/YourSystem.txt concerning other COMM channels: eth0
virbr0 wlan0
Which can interfere with Browser naviagation.

 Don't worry about the following, it is for experts should trouble
shooting be necessary.
==========================================================

 Checking for modem support lines:
 --------------------------------------
     /device/modem symbolic link:   
slmodemd created symbolic link /dev/ttySL0:  
     Within /etc/udev/ files:

     Within /etc/modprobe.conf files:

     Within any ancient /etc/devfs files:

     Within ancient kernel 2.4.n /etc/module.conf files:

--------- end modem support lines --------






[Index of Archives]     [Linux Media Development]     [Asterisk]     [DCCP]     [Netdev]     [X.org]     [Xfree86]     [Fedora Women]     [Linux USB]

  Powered by Linux