Re: Andrew, United States, kernel 3.0.0-12-generic

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Andrew,

The modem answers with:

efax: 18:09 waiting 120.0 s
efax: 19:40 .532 [<CR><LF>NO CARRIER<CR><LF>]
efax: 19:40 response "NO CARRIER"
efax: 19:40 Error: unable to answer call
efax: 19:40 command  "Q0V1"
efax: 19:40 waiting 2.0 s

Can you send us the following:
$ sudo cat /proc/interrupts
???
Thank you in advance

Philippe Vouters (Fontainebleau/France)
URL: http://vouters.dyndns.org/
SIP: sip:Vouters@xxxxxxxxxxxxxxxx

Le 22/06/2012 21:22, Andrew Merczynski-Hait a écrit :
Yes, if I hook up a phone to it I get a dial tone. My modem has two physical
ports on the back, so now I switched where the phone line goes in to just to
be sure. I still get the same error though. If I listen to the phone while
running it, I can hear the line ring twice, and then stop.

If I don't terminate after that error after a while I get this:

efax: 18:09 command  "+FNR=1,1,1,0"
efax: 18:09 waiting 5.0 s
efax: 18:09 .132 [<CR><LF>OK<CR><LF>]
efax: 18:09 response "OK"
efax: 18:09 command  "+FLO=1"
efax: 18:09 waiting 5.0 s
efax: 18:09 .304 [<CR><LF>OK<CR><LF>]
efax: 18:09 response "OK"
efax: 18:09 command  "+FBO=0"
efax: 18:09 waiting 5.0 s
efax: 18:09 .472 [<CR><LF>OK<CR><LF>]
efax: 18:09 response "OK"
efax: 18:09 command  "+FCR=1"
efax: 18:09 waiting 5.0 s
efax: 18:09 .644 [<CR><LF>OK<CR><LF>]
efax: 18:09 response "OK"
efax: 18:09 command  "+FIS?"
efax: 18:09 waiting 5.0 s
efax: 18:09 .692 [<CR><LF>1,5,0,2,0,0,0,0<CR><LF>]
efax: 18:09 .712 [<CR><LF>OK<CR><LF>]
efax: 18:09 response "OK"
efax: 18:09 command  "+FLI="                    ""
efax: 18:09 waiting 5.0 s
efax: 18:09 .784 [<CR><LF>OK<CR><LF>]
efax: 18:09 response "OK"
efax: 18:09 command  "A"
efax: 18:09 waiting 120.0 s
efax: 19:40 .532 [<CR><LF>NO CARRIER<CR><LF>]
efax: 19:40 response "NO CARRIER"
efax: 19:40 Error: unable to answer call
efax: 19:40 command  "Q0V1"
efax: 19:40 waiting 2.0 s
efax: 19:40 .712 [<CR><LF>OK<CR><LF>]
efax: 19:40 response "OK"
efax: 19:40 command  "H"
efax: 19:40 waiting 5.0 s
efax: 19:41 .572 [<CR><LF>OK<CR><LF>]
efax: 19:41 response "OK"
efax: 19:41 done, returning 3 (invalid modem response



-----Original Message-----
From: Philippe Vouters [mailto:philippe.vouters@xxxxxxxxxxx]
Sent: Friday, June 22, 2012 3:06 PM
To: Andrew Merczynski-Hait
Cc: 'Linmodems'; 'Antonio Olivares'; Marvin Stodolsky
Subject: Re: Andrew, United States, kernel 3.0.0-12-generic

Andrew,

With efax, you get this:
efax: 47:42 command "Q0V1"
efax: 47:42 waiting 2.0 s
efax: 47:43 .072 [<CR><LF>NO CARRIER<CR><LF>]
efax: 47:43 response "NO CARRIER"
efax: 47:43 waiting 2.0 s
efax: 47:45 command "Q0V1"
efax: 47:45 waiting 2.0 s
efax: 47:45 .252 [<CR><LF>OK<CR><LF>]
efax: 47:45 response "OK"

Are you sure your537EP modem is physically connected to a phone line ?

Marv,

I need your help for Ubuntu. Unlike Fedora, there is no /var/log/messages.
Where does syslog logs on Ubuntu ????

Philippe Vouters (Fontainebleau/France)
URL: http://vouters.dyndns.org/
SIP: sip:Vouters@xxxxxxxxxxxxxxxx

Le 22/06/2012 20:49, Andrew Merczynski-Hait a écrit :
andrew@ubuntu-11:~$ efax -i M2L3 -vewinchmart
efax: Fri Jun 22 14:46:09 2012 efax v 0.9a-001114 Copyright 1999 Ed
Casas
efax: Fri Jun 22 14:46:09 2012 efax v 0.9a-001114 Copyright 1999 Ed
Casas
efax: 46:09 compiled Jun 21 2006 05:59:09
efax: 46:09 argv[0]=efax
efax: 46:09 argv[1]=-i
efax: 46:09 argv[2]=M2L3
efax: 46:09 argv[3]=-vewinchmart
efax: 46:11 opened /dev/modem
efax: 46:11 command  "Q0V1"
efax: 46:11 waiting 2.0 s
efax: 46:15 waiting 2.0 s
efax: 46:15 .120 [ATQ0V1<CR><CR><LF>]
efax: 46:15 .180 [OK<CR><LF>]
efax: 46:15 response "OK"
efax: 46:15 waiting 2.0 s
efax: 46:17 command  "Q0V1"
efax: 46:17 waiting 2.0 s
efax: 46:17 .300 [ATQ0V1<CR><CR><LF>]
efax: 46:17 .360 [OK<CR><LF>]
efax: 46:17 response "OK"
efax: 46:17 command  "M2L3"
efax: 46:17 waiting 5.0 s
efax: 46:17 .480 [ATM2L3<CR><CR><LF>]
efax: 46:17 .540 [OK<CR><LF>]
efax: 46:17 response "OK"
efax: 46:17 command  "E0"
efax: 46:17 waiting 5.0 s
efax: 46:17 .660 [ATE0<CR><CR><LF>]
efax: 46:17 .712 [OK<CR><LF>]
efax: 46:17 response "OK"
efax: 46:17 command  "I3"
efax: 46:17 waiting 5.0 s
efax: 46:17 .860 [<CR><LF>537EP <CR><LF>]
efax: 46:17 .880 [<CR><LF>OK<CR><LF>]
efax: 46:17 response "OK"
efax: 46:17 command  "+FCLASS=?"
efax: 46:17 waiting 5.0 s
efax: 46:18 .032 [<CR><LF>0,1,2,2.0,8<CR><LF>]
efax: 46:18 .052 [<CR><LF>OK<CR><LF>]
efax: 46:18 response "OK"
efax: 46:18 command  "+FCLASS=2.0"
efax: 46:18 waiting 5.0 s
efax: 46:18 .220 [<CR><LF>OK<CR><LF>]
efax: 46:18 response "OK"
efax: 46:18 command  "+FMI?"
efax: 46:18 waiting 5.0 s
efax: 46:18 .372 [<CR><LF>Intel Corporation<CR><LF>]
efax: 46:18 .392 [<CR><LF>OK<CR><LF>]
efax: 46:18 response "OK"
efax: 46:18 command  "+FMM?"
efax: 46:18 waiting 5.0 s
efax: 46:18 .540 [<CR><LF>Intel V92 Data Fax Voice<CR><LF>]
efax: 46:18 .540 [<CR><LF>H.324 video-ready rev. 1.0<CR><LF>]
efax: 46:18 .560 [<CR><LF>OK<CR><LF>]
efax: 46:18 response "OK"
efax: 46:18 command  "+FMR?"
efax: 46:18 waiting 5.0 s
efax: 46:18 .712 [<CR><LF>RSA REV 4.04 <CR><LF>]
efax: 46:18 .732 [<CR><LF>OK<CR><LF>]
efax: 46:18 response "OK"
efax: 46:18 using 537EP Intel Corporation Intel V92 Data Fax Voice RSA
REV
4.04 in class 2.0
efax: 46:18 command  "+FIP"
efax: 46:18 waiting 5.0 s
efax: 46:18 .892 [<CR><LF>ERROR<CR><LF>]
efax: 46:18 response "ERROR"
efax: 46:18 Warning: wrong response after command:  +FIP THEN IT HANGS
AND I TERMINATE IT AND GET THIS:

^Cefax: 46:18 command  "+FNR=1,1,1,0"
efax: 46:18 waiting 5.0 s
efax: 46:19 .060 [<CR><LF>OK<CR><LF>]
efax: 46:19 response "OK"
efax: 46:19 command  "+FLO=1"
efax: 46:19 waiting 5.0 s
efax: 46:19 .232 [<CR><LF>OK<CR><LF>]
efax: 46:19 response "OK"
efax: 46:19 command  "+FBO=0"
efax: 46:19 waiting 5.0 s
efax: 46:19 .400 [<CR><LF>OK<CR><LF>]
efax: 46:19 response "OK"
efax: 46:19 command  "+FCR=1"
efax: 46:19 waiting 5.0 s
efax: 46:19 .572 [<CR><LF>OK<CR><LF>]
efax: 46:19 response "OK"
efax: 46:19 command  "+FIS?"
efax: 46:19 waiting 5.0 s
efax: 46:19 .620 [<CR><LF>1,5,0,2,0,0,0,0<CR><LF>]
efax: 46:19 .640 [<CR><LF>OK<CR><LF>]
efax: 46:19 response "OK"
efax: 46:19 command  "+FLI="                    ""
efax: 46:19 waiting 5.0 s
efax: 46:19 .712 [<CR><LF>OK<CR><LF>]
efax: 46:19 response "OK"
efax: 46:19 command  "A"
efax: 46:19 waiting 120.0 s
efax: 47:42 Error: terminating on signal 2
efax: 47:42 command  "Q0V1"
efax: 47:42 waiting 2.0 s
efax: 47:43 .072 [<CR><LF>NO CARRIER<CR><LF>]
efax: 47:43 response "NO CARRIER"
efax: 47:43 waiting 2.0 s
efax: 47:45 command  "Q0V1"
efax: 47:45 waiting 2.0 s
efax: 47:45 .252 [<CR><LF>OK<CR><LF>]
efax: 47:45 response "OK"
efax: 47:45 command  "H"
efax: 47:45 waiting 5.0 s
efax: 47:46 .112 [<CR><LF>OK<CR><LF>]
efax: 47:46 response "OK"
efax: 47:46 done, returning 5 (terminated by signal)


There is no such file or directory /var/log/messages

-----Original Message-----
From: Philippe Vouters [mailto:philippe.vouters@xxxxxxxxxxx]
Sent: Friday, June 22, 2012 9:41 AM
To: Andrew Merczynski-Hait; Linmodems; Antonio Olivares
Subject: Re: Andrew, United States, kernel 3.0.0-12-generic

Andrew,

Can you cut and paste the full efax dialog along with $ tail -f
/var/log/messages started in another terminal ?

Philippe Vouters (Fontainebleau/France)
URL: http://vouters.dyndns.org/
SIP: sip:Vouters@xxxxxxxxxxxxxxxx

Le 22/06/2012 02:19, Andrew Merczynski-Hait a écrit :
Okay, using efax it seems that it sees the modem. It stops with,
"Warning:
wrong response after command: +FIP"

What can I provide now to help?

-----Original Message-----
From: Philippe Vouters [mailto:philippe.vouters@xxxxxxxxxxx]
Sent: Thursday, June 21, 2012 5:01 PM
To: Andrew Merczynski-Hait
Cc: 'Antonio Olivares'; 'Jacques Goldberg'; 'Marvin Stodolsky'
Subject: Re: Andrew, United States, kernel 3.0.0-12-generic

Andrew,

Can you follow the steps at
http://vouters.dyndns.org/Intel/Intel-Readme.html ???
It starts with testing using efax.
Do not yet use wvdialconf unless you know what you do.

Philippe Vouters (Fontainebleau/France)
URL: http://vouters.dyndns.org/
SIP: sip:Vouters@xxxxxxxxxxxxxxxx

Le 21/06/2012 22:52, Andrew Merczynski-Hait a écrit :
andrew@ubuntu-11:~/Downloads/intel-536-537$ sudo wvdialconf [sudo]
password for andrew:
Editing `/etc/wvdial.conf'.

Scanning your serial ports for a modem.

ttyS0<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
ttyS0<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200
baud
ttyS0<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.
Modem Port Scan<*1>: S1   S2   S3   S4   S5   S6   S7   S8
Modem Port Scan<*1>: S9   S10  S11  S12  S13  S14  S15  S16
Modem Port Scan<*1>: S17  S18  S19  S20  S21  S22  S23  S24 Modem
Port
Scan<*1>: S25  S26  S27  S28  S29  S30  S31


Sorry, no modem was detected!  Is it in use by another program?
Did you configure it properly with setserial?

Please read the FAQ at http://alumnit.ca/wiki/?WvDial


$ dmesg | grep '537'
[   20.615679] Intel 537EP card found
[   20.615683] 537ep:softcore_init_struct: driver serial already
allocated
device.
[   20.615687] 537ep:softcore_init_struct: Unregistering serial driver.
[  268.245922] Modules linked in: Intel537(+) bnep rfcomm bluetooth
ppdev
snd_ca0106 snd_seq_midi snd_rawmidi snd_intel8x0 snd_ac97_codec
ac97_bus snd_pcm snd_seq_midi_event binfmt_misc dcdbas snd_seq
snd_timer snd_seq_device snd soundcore snd_page_alloc i915
parport_pc drm_kms_helper drm shpchp i2c_algo_bit video lp parport
usbhid hid firewire_ohci e100 usb_storage uas firewire_core
crc_itu_t floppy [last unloaded: Intel537] [ 268.246128]
[<f932e693>]
sound_init+0xb3/0x190 [Intel537] [  268.246226] [<f932ae58>]
core_init_module+0x38/0x50 [Intel537] [  268.246331] [<f974a008>]
init_536+0x8/0x1000 [Intel537] [  268.246376] Intel 537EP card found
[
301.827656] 537: Loaded [ 1537.609618] PM: Syncing filesystems ...
done.
[ 1537.613013] PM: Preparing system for mem sleep [ 1538.155375]
firewire_ohci 0000:01:00.0: restoring config space at offset 0x4
(was 0x0, writing 0xfeafd000)


-----Original Message-----
From: Antonio Olivares [mailto:olivares14031@xxxxxxxxx]
Sent: Thursday, June 21, 2012 4:44 PM
To: Andrew Merczynski-Hait
Cc: Philippe Vouters; Jacques Goldberg; Marvin Stodolsky
Subject: Re: Andrew, United States, kernel 3.0.0-12-generic

Dear Andrew,

The driver is the same need not worry here.  After the installation
is apparently successful, please do as this and send us the output
of

andrew@ubuntu-11:~/Downloads/intel-536-537$ sudo wvdialconf

The modem driver should be loaded and the output of $ dmesg | grep '537'

in case that wvdialconf does not find the modem port.

Regards,


Antonio


On Thu, Jun 21, 2012 at 3:20 PM, Andrew Merczynski-Hait
<andrewmh20@xxxxxxxxxx> wrote:
Is that link any different than what I had earlier? The filenames
are the same. I had to have it downloaded already in order to
extract and build the driver……



From: Philippe Vouters [mailto:philippe.vouters@xxxxxxxxxxx]
Sent: Thursday, June 21, 2012 2:06 PM
To: Andrew Merczynski-Hait


Cc: 'Jacques Goldberg'; 'Antonio Olivares'; 'Marvin Stodolsky'
Subject: Re: Andrew, United States, kernel 3.0.0-12-generic



Dear Andrew,

First of all, did you download
http://vouters.dyndns.org/Intel/intel-536EP-537EP_2012_05_19.tar.bz2 ?
Next I suggest you a reboot and afterwards:
$ rm -rf /path/to/intel-536-537/
$ cd /path/to
$ tar -jxvf intel-536EP-537EP_2012_05_19.tar.bz2
$ cd intel-536-537/
$ sudo make uninstall
$ make 537
$ sudo make install
$ dmesg | grep 537
$ stty -F /dev/modem -a
$ dmesg | grep 537

Yours truly,

Philippe Vouters (Fontainebleau/France)

URL: http://vouters.dyndns.org/

SIP: sip:Vouters@xxxxxxxxxxxxxxxx

Le 21/06/2012 19:36, Andrew Merczynski-Hait a écrit :

$ dmesg | grep 536

[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144
bytes)

[    0.343343] TCP bind hash table entries: 65536 (order: 7, 524288
bytes)

[    0.343681] TCP: Hash tables configured (established 131072 bind
65536)

[    0.736536] NET: Registered protocol family 17

[    2.453621] sd 2:0:0:0: [sda] Write cache: disabled, read cache:
enabled, doesn't support DPO or FUA

[   15.780536] EXT4-fs (sda1): mounted filesystem with ordered data
mode.
Opts: (null)



I know you probably know what you’re doing J but I am using a 537
modem not
536 so I also did this:



$ dmesg | grep 537

[    0.647537] agpgart-intel 0000:00:00.0: Intel 865 Chipset

[   19.664474] Intel 537EP card found

[   19.664478] 537ep:softcore_init_struct: driver serial already
allocated device.

[   19.664482] 537ep:softcore_init_struct: Unregistering serial driver.



Thanks Andrew





From: Philippe Vouters [mailto:philippe.vouters@xxxxxxxxxxx]
Sent: Thursday, June 21, 2012 4:17 AM
To: Andrew Merczynski-Hait
Cc: 'Jacques Goldberg'; 'Antonio Olivares'; 'Marvin Stodolsky'
Subject: Re: Andrew, United States, kernel 3.0.0-12-generic



Hi Andrew,

Can you cut'n paste and send us the following:
$ dmesg | grep 536
Yours truly,
Philippe



Philippe Vouters (Fontainebleau/France)

URL: http://vouters.dyndns.org/

SIP: sip:Vouters@xxxxxxxxxxxxxxxx

Le 21/06/2012 04:22, Andrew Merczynski-Hait a écrit :

Hi all,



I apologize for causing an issue and I really do appreciate your help.
I do realize you have a lot to deal with. (Incidentally, I did make
sure to put uname –r  in quotes, I just didn’t know they were back
quotes.)



After copying over the autoconf.h file I seem to get a successful
build and install. However, gnome-ppp and wvdial still cannot see
that there is a modem installed. I see in the readme that for
unknown distributions the modules and utilities will install but
not the boot scripts. I presume that is probably an issue; can it
be fixed? Would it simplify things a lot if I installed a different
distro for the purpose
of using the modem?
Thanks,

Andrew



From: Jacques Goldberg [mailto:goldberg@xxxxxxxxxxxxxxxxxxxx]
Sent: Wednesday, June 20, 2012 1:41 PM
To: Andrew Merczynski-Hait
Cc: 'Antonio Olivares'; 'Philippe Vouters'; 'Marvin Stodolsky'
Subject: Re: Andrew, United States, kernel 3.0.0-12-generic













[Index of Archives]     [Linux Media Development]     [Asterisk]     [DCCP]     [Netdev]     [X.org]     [Xfree86]     [Fedora Women]     [Linux USB]

  Powered by Linux