RE: Andrew, United States, kernel 3.0.0-12-generic

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



           CPU0       
  0:         49   IO-APIC-edge      timer
  1:        145   IO-APIC-edge      i8042
  4:          4   IO-APIC-edge    
  6:          3   IO-APIC-edge      floppy
  7:          0   IO-APIC-edge      parport0
  8:          1   IO-APIC-edge      rtc0
  9:          0   IO-APIC-fasteoi   acpi
 14:          0   IO-APIC-edge      ata_piix
 15:        186   IO-APIC-edge      ata_piix
 16:        828   IO-APIC-fasteoi   uhci_hcd:usb2, uhci_hcd:usb4, i915
 17:        306   IO-APIC-fasteoi   snd_ca0106, Intel ICH5
 19:        692   IO-APIC-fasteoi   uhci_hcd:usb3
 20:        135   IO-APIC-fasteoi   eth0
 21:          4   IO-APIC-fasteoi   firewire_ohci
 23:      23981   IO-APIC-fasteoi   ehci_hcd:usb1
NMI:          0   Non-maskable interrupts
LOC:      14182   Local timer interrupts
SPU:          0   Spurious interrupts
PMI:          0   Performance monitoring interrupts
IWI:          0   IRQ work interrupts
RES:          0   Rescheduling interrupts
CAL:          0   Function call interrupts
TLB:          0   TLB shootdowns
TRM:          0   Thermal event interrupts
THR:          0   Threshold APIC interrupts
MCE:          0   Machine check exceptions
MCP:          1   Machine check polls
ERR:          0
MIS:          0


Thanks,
Andrew
-----Original Message-----
From: Philippe Vouters [mailto:philippe.vouters@xxxxxxxxxxx] 
Sent: Friday, June 22, 2012 4:14 PM
To: Andrew Merczynski-Hait
Cc: 'Linmodems'; 'Antonio Olivares'; 'Marvin Stodolsky'
Subject: Re: Andrew, United States, kernel 3.0.0-12-generic

Andrew,

The modem answers with:

efax: 18:09 waiting 120.0 s
efax: 19:40 .532 [<CR><LF>NO CARRIER<CR><LF>]
efax: 19:40 response "NO CARRIER"
efax: 19:40 Error: unable to answer call
efax: 19:40 command  "Q0V1"
efax: 19:40 waiting 2.0 s

Can you send us the following:
$ sudo cat /proc/interrupts
???
Thank you in advance

Philippe Vouters (Fontainebleau/France)
URL: http://vouters.dyndns.org/
SIP: sip:Vouters@xxxxxxxxxxxxxxxx

Le 22/06/2012 21:22, Andrew Merczynski-Hait a écrit :
> Yes, if I hook up a phone to it I get a dial tone. My modem has two 
> physical ports on the back, so now I switched where the phone line 
> goes in to just to be sure. I still get the same error though. If I 
> listen to the phone while running it, I can hear the line ring twice, and
then stop.
>
> If I don't terminate after that error after a while I get this:
>
> efax: 18:09 command  "+FNR=1,1,1,0"
> efax: 18:09 waiting 5.0 s
> efax: 18:09 .132 [<CR><LF>OK<CR><LF>]
> efax: 18:09 response "OK"
> efax: 18:09 command  "+FLO=1"
> efax: 18:09 waiting 5.0 s
> efax: 18:09 .304 [<CR><LF>OK<CR><LF>]
> efax: 18:09 response "OK"
> efax: 18:09 command  "+FBO=0"
> efax: 18:09 waiting 5.0 s
> efax: 18:09 .472 [<CR><LF>OK<CR><LF>]
> efax: 18:09 response "OK"
> efax: 18:09 command  "+FCR=1"
> efax: 18:09 waiting 5.0 s
> efax: 18:09 .644 [<CR><LF>OK<CR><LF>]
> efax: 18:09 response "OK"
> efax: 18:09 command  "+FIS?"
> efax: 18:09 waiting 5.0 s
> efax: 18:09 .692 [<CR><LF>1,5,0,2,0,0,0,0<CR><LF>]
> efax: 18:09 .712 [<CR><LF>OK<CR><LF>]
> efax: 18:09 response "OK"
> efax: 18:09 command  "+FLI="                    ""
> efax: 18:09 waiting 5.0 s
> efax: 18:09 .784 [<CR><LF>OK<CR><LF>]
> efax: 18:09 response "OK"
> efax: 18:09 command  "A"
> efax: 18:09 waiting 120.0 s
> efax: 19:40 .532 [<CR><LF>NO CARRIER<CR><LF>]
> efax: 19:40 response "NO CARRIER"
> efax: 19:40 Error: unable to answer call
> efax: 19:40 command  "Q0V1"
> efax: 19:40 waiting 2.0 s
> efax: 19:40 .712 [<CR><LF>OK<CR><LF>]
> efax: 19:40 response "OK"
> efax: 19:40 command  "H"
> efax: 19:40 waiting 5.0 s
> efax: 19:41 .572 [<CR><LF>OK<CR><LF>]
> efax: 19:41 response "OK"
> efax: 19:41 done, returning 3 (invalid modem response
>
>
>
> -----Original Message-----
> From: Philippe Vouters [mailto:philippe.vouters@xxxxxxxxxxx]
> Sent: Friday, June 22, 2012 3:06 PM
> To: Andrew Merczynski-Hait
> Cc: 'Linmodems'; 'Antonio Olivares'; Marvin Stodolsky
> Subject: Re: Andrew, United States, kernel 3.0.0-12-generic
>
> Andrew,
>
> With efax, you get this:
> efax: 47:42 command "Q0V1"
> efax: 47:42 waiting 2.0 s
> efax: 47:43 .072 [<CR><LF>NO CARRIER<CR><LF>]
> efax: 47:43 response "NO CARRIER"
> efax: 47:43 waiting 2.0 s
> efax: 47:45 command "Q0V1"
> efax: 47:45 waiting 2.0 s
> efax: 47:45 .252 [<CR><LF>OK<CR><LF>]
> efax: 47:45 response "OK"
>
> Are you sure your537EP modem is physically connected to a phone line ?
>
> Marv,
>
> I need your help for Ubuntu. Unlike Fedora, there is no /var/log/messages.
> Where does syslog logs on Ubuntu ????
>
> Philippe Vouters (Fontainebleau/France)
> URL: http://vouters.dyndns.org/
> SIP: sip:Vouters@xxxxxxxxxxxxxxxx
>
> Le 22/06/2012 20:49, Andrew Merczynski-Hait a écrit :
>> andrew@ubuntu-11:~$ efax -i M2L3 -vewinchmart
>> efax: Fri Jun 22 14:46:09 2012 efax v 0.9a-001114 Copyright 1999 Ed 
>> Casas
>> efax: Fri Jun 22 14:46:09 2012 efax v 0.9a-001114 Copyright 1999 Ed 
>> Casas
>> efax: 46:09 compiled Jun 21 2006 05:59:09
>> efax: 46:09 argv[0]=efax
>> efax: 46:09 argv[1]=-i
>> efax: 46:09 argv[2]=M2L3
>> efax: 46:09 argv[3]=-vewinchmart
>> efax: 46:11 opened /dev/modem
>> efax: 46:11 command  "Q0V1"
>> efax: 46:11 waiting 2.0 s
>> efax: 46:15 waiting 2.0 s
>> efax: 46:15 .120 [ATQ0V1<CR><CR><LF>]
>> efax: 46:15 .180 [OK<CR><LF>]
>> efax: 46:15 response "OK"
>> efax: 46:15 waiting 2.0 s
>> efax: 46:17 command  "Q0V1"
>> efax: 46:17 waiting 2.0 s
>> efax: 46:17 .300 [ATQ0V1<CR><CR><LF>]
>> efax: 46:17 .360 [OK<CR><LF>]
>> efax: 46:17 response "OK"
>> efax: 46:17 command  "M2L3"
>> efax: 46:17 waiting 5.0 s
>> efax: 46:17 .480 [ATM2L3<CR><CR><LF>]
>> efax: 46:17 .540 [OK<CR><LF>]
>> efax: 46:17 response "OK"
>> efax: 46:17 command  "E0"
>> efax: 46:17 waiting 5.0 s
>> efax: 46:17 .660 [ATE0<CR><CR><LF>]
>> efax: 46:17 .712 [OK<CR><LF>]
>> efax: 46:17 response "OK"
>> efax: 46:17 command  "I3"
>> efax: 46:17 waiting 5.0 s
>> efax: 46:17 .860 [<CR><LF>537EP <CR><LF>]
>> efax: 46:17 .880 [<CR><LF>OK<CR><LF>]
>> efax: 46:17 response "OK"
>> efax: 46:17 command  "+FCLASS=?"
>> efax: 46:17 waiting 5.0 s
>> efax: 46:18 .032 [<CR><LF>0,1,2,2.0,8<CR><LF>]
>> efax: 46:18 .052 [<CR><LF>OK<CR><LF>]
>> efax: 46:18 response "OK"
>> efax: 46:18 command  "+FCLASS=2.0"
>> efax: 46:18 waiting 5.0 s
>> efax: 46:18 .220 [<CR><LF>OK<CR><LF>]
>> efax: 46:18 response "OK"
>> efax: 46:18 command  "+FMI?"
>> efax: 46:18 waiting 5.0 s
>> efax: 46:18 .372 [<CR><LF>Intel Corporation<CR><LF>]
>> efax: 46:18 .392 [<CR><LF>OK<CR><LF>]
>> efax: 46:18 response "OK"
>> efax: 46:18 command  "+FMM?"
>> efax: 46:18 waiting 5.0 s
>> efax: 46:18 .540 [<CR><LF>Intel V92 Data Fax Voice<CR><LF>]
>> efax: 46:18 .540 [<CR><LF>H.324 video-ready rev. 1.0<CR><LF>]
>> efax: 46:18 .560 [<CR><LF>OK<CR><LF>]
>> efax: 46:18 response "OK"
>> efax: 46:18 command  "+FMR?"
>> efax: 46:18 waiting 5.0 s
>> efax: 46:18 .712 [<CR><LF>RSA REV 4.04 <CR><LF>]
>> efax: 46:18 .732 [<CR><LF>OK<CR><LF>]
>> efax: 46:18 response "OK"
>> efax: 46:18 using 537EP Intel Corporation Intel V92 Data Fax Voice 
>> RSA REV
>> 4.04 in class 2.0
>> efax: 46:18 command  "+FIP"
>> efax: 46:18 waiting 5.0 s
>> efax: 46:18 .892 [<CR><LF>ERROR<CR><LF>]
>> efax: 46:18 response "ERROR"
>> efax: 46:18 Warning: wrong response after command:  +FIP THEN IT 
>> HANGS AND I TERMINATE IT AND GET THIS:
>>
>> ^Cefax: 46:18 command  "+FNR=1,1,1,0"
>> efax: 46:18 waiting 5.0 s
>> efax: 46:19 .060 [<CR><LF>OK<CR><LF>]
>> efax: 46:19 response "OK"
>> efax: 46:19 command  "+FLO=1"
>> efax: 46:19 waiting 5.0 s
>> efax: 46:19 .232 [<CR><LF>OK<CR><LF>]
>> efax: 46:19 response "OK"
>> efax: 46:19 command  "+FBO=0"
>> efax: 46:19 waiting 5.0 s
>> efax: 46:19 .400 [<CR><LF>OK<CR><LF>]
>> efax: 46:19 response "OK"
>> efax: 46:19 command  "+FCR=1"
>> efax: 46:19 waiting 5.0 s
>> efax: 46:19 .572 [<CR><LF>OK<CR><LF>]
>> efax: 46:19 response "OK"
>> efax: 46:19 command  "+FIS?"
>> efax: 46:19 waiting 5.0 s
>> efax: 46:19 .620 [<CR><LF>1,5,0,2,0,0,0,0<CR><LF>]
>> efax: 46:19 .640 [<CR><LF>OK<CR><LF>]
>> efax: 46:19 response "OK"
>> efax: 46:19 command  "+FLI="                    ""
>> efax: 46:19 waiting 5.0 s
>> efax: 46:19 .712 [<CR><LF>OK<CR><LF>]
>> efax: 46:19 response "OK"
>> efax: 46:19 command  "A"
>> efax: 46:19 waiting 120.0 s
>> efax: 47:42 Error: terminating on signal 2
>> efax: 47:42 command  "Q0V1"
>> efax: 47:42 waiting 2.0 s
>> efax: 47:43 .072 [<CR><LF>NO CARRIER<CR><LF>]
>> efax: 47:43 response "NO CARRIER"
>> efax: 47:43 waiting 2.0 s
>> efax: 47:45 command  "Q0V1"
>> efax: 47:45 waiting 2.0 s
>> efax: 47:45 .252 [<CR><LF>OK<CR><LF>]
>> efax: 47:45 response "OK"
>> efax: 47:45 command  "H"
>> efax: 47:45 waiting 5.0 s
>> efax: 47:46 .112 [<CR><LF>OK<CR><LF>]
>> efax: 47:46 response "OK"
>> efax: 47:46 done, returning 5 (terminated by signal)
>>
>>
>> There is no such file or directory /var/log/messages
>>
>> -----Original Message-----
>> From: Philippe Vouters [mailto:philippe.vouters@xxxxxxxxxxx]
>> Sent: Friday, June 22, 2012 9:41 AM
>> To: Andrew Merczynski-Hait; Linmodems; Antonio Olivares
>> Subject: Re: Andrew, United States, kernel 3.0.0-12-generic
>>
>> Andrew,
>>
>> Can you cut and paste the full efax dialog along with $ tail -f 
>> /var/log/messages started in another terminal ?
>>
>> Philippe Vouters (Fontainebleau/France)
>> URL: http://vouters.dyndns.org/
>> SIP: sip:Vouters@xxxxxxxxxxxxxxxx
>>
>> Le 22/06/2012 02:19, Andrew Merczynski-Hait a écrit :
>>> Okay, using efax it seems that it sees the modem. It stops with,
> "Warning:
>>> wrong response after command: +FIP"
>>>
>>> What can I provide now to help?
>>>
>>> -----Original Message-----
>>> From: Philippe Vouters [mailto:philippe.vouters@xxxxxxxxxxx]
>>> Sent: Thursday, June 21, 2012 5:01 PM
>>> To: Andrew Merczynski-Hait
>>> Cc: 'Antonio Olivares'; 'Jacques Goldberg'; 'Marvin Stodolsky'
>>> Subject: Re: Andrew, United States, kernel 3.0.0-12-generic
>>>
>>> Andrew,
>>>
>>> Can you follow the steps at
>>> http://vouters.dyndns.org/Intel/Intel-Readme.html ???
>>> It starts with testing using efax.
>>> Do not yet use wvdialconf unless you know what you do.
>>>
>>> Philippe Vouters (Fontainebleau/France)
>>> URL: http://vouters.dyndns.org/
>>> SIP: sip:Vouters@xxxxxxxxxxxxxxxx
>>>
>>> Le 21/06/2012 22:52, Andrew Merczynski-Hait a écrit :
>>>> andrew@ubuntu-11:~/Downloads/intel-536-537$ sudo wvdialconf [sudo] 
>>>> password for andrew:
>>>> Editing `/etc/wvdial.conf'.
>>>>
>>>> Scanning your serial ports for a modem.
>>>>
>>>> ttyS0<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
>>>> ttyS0<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 
>>>> baud
>>>> ttyS0<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.
>>>> Modem Port Scan<*1>: S1   S2   S3   S4   S5   S6   S7   S8
>>>> Modem Port Scan<*1>: S9   S10  S11  S12  S13  S14  S15  S16
>>>> Modem Port Scan<*1>: S17  S18  S19  S20  S21  S22  S23  S24 Modem 
>>>> Port
>>>> Scan<*1>: S25  S26  S27  S28  S29  S30  S31
>>>>
>>>>
>>>> Sorry, no modem was detected!  Is it in use by another program?
>>>> Did you configure it properly with setserial?
>>>>
>>>> Please read the FAQ at http://alumnit.ca/wiki/?WvDial
>>>>
>>>>
>>>> $ dmesg | grep '537'
>>>> [   20.615679] Intel 537EP card found
>>>> [   20.615683] 537ep:softcore_init_struct: driver serial already
>> allocated
>>>> device.
>>>> [   20.615687] 537ep:softcore_init_struct: Unregistering serial driver.
>>>> [  268.245922] Modules linked in: Intel537(+) bnep rfcomm bluetooth 
>>>> ppdev
>>>> snd_ca0106 snd_seq_midi snd_rawmidi snd_intel8x0 snd_ac97_codec 
>>>> ac97_bus snd_pcm snd_seq_midi_event binfmt_misc dcdbas snd_seq 
>>>> snd_timer snd_seq_device snd soundcore snd_page_alloc i915 
>>>> parport_pc drm_kms_helper drm shpchp i2c_algo_bit video lp parport 
>>>> usbhid hid firewire_ohci e100 usb_storage uas firewire_core 
>>>> crc_itu_t floppy [last unloaded: Intel537] [ 268.246128] 
>>>> [<f932e693>]
>>>> sound_init+0xb3/0x190 [Intel537] [  268.246226] [<f932ae58>]
>>>> core_init_module+0x38/0x50 [Intel537] [  268.246331] [<f974a008>]
>>>> init_536+0x8/0x1000 [Intel537] [  268.246376] Intel 537EP card 
>>>> found [
>>> 301.827656] 537: Loaded [ 1537.609618] PM: Syncing filesystems ...
>>>> done.
>>>> [ 1537.613013] PM: Preparing system for mem sleep [ 1538.155375] 
>>>> firewire_ohci 0000:01:00.0: restoring config space at offset 0x4 
>>>> (was 0x0, writing 0xfeafd000)
>>>>
>>>>
>>>> -----Original Message-----
>>>> From: Antonio Olivares [mailto:olivares14031@xxxxxxxxx]
>>>> Sent: Thursday, June 21, 2012 4:44 PM
>>>> To: Andrew Merczynski-Hait
>>>> Cc: Philippe Vouters; Jacques Goldberg; Marvin Stodolsky
>>>> Subject: Re: Andrew, United States, kernel 3.0.0-12-generic
>>>>
>>>> Dear Andrew,
>>>>
>>>> The driver is the same need not worry here.  After the installation 
>>>> is apparently successful, please do as this and send us the output 
>>>> of
>>>>
>>>> andrew@ubuntu-11:~/Downloads/intel-536-537$ sudo wvdialconf
>>>>
>>>> The modem driver should be loaded and the output of $ dmesg | grep
'537'
>>>>
>>>> in case that wvdialconf does not find the modem port.
>>>>
>>>> Regards,
>>>>
>>>>
>>>> Antonio
>>>>
>>>>
>>>> On Thu, Jun 21, 2012 at 3:20 PM, Andrew Merczynski-Hait 
>>>> <andrewmh20@xxxxxxxxxx> wrote:
>>>>> Is that link any different than what I had earlier? The filenames 
>>>>> are the same. I had to have it downloaded already in order to 
>>>>> extract and build the driver??
>>>>>
>>>>>
>>>>>
>>>>> From: Philippe Vouters [mailto:philippe.vouters@xxxxxxxxxxx]
>>>>> Sent: Thursday, June 21, 2012 2:06 PM
>>>>> To: Andrew Merczynski-Hait
>>>>>
>>>>>
>>>>> Cc: 'Jacques Goldberg'; 'Antonio Olivares'; 'Marvin Stodolsky'
>>>>> Subject: Re: Andrew, United States, kernel 3.0.0-12-generic
>>>>>
>>>>>
>>>>>
>>>>> Dear Andrew,
>>>>>
>>>>> First of all, did you download
>>>>> http://vouters.dyndns.org/Intel/intel-536EP-537EP_2012_05_19.tar.bz2 ?
>>>>> Next I suggest you a reboot and afterwards:
>>>>> $ rm -rf /path/to/intel-536-537/
>>>>> $ cd /path/to
>>>>> $ tar -jxvf intel-536EP-537EP_2012_05_19.tar.bz2
>>>>> $ cd intel-536-537/
>>>>> $ sudo make uninstall
>>>>> $ make 537
>>>>> $ sudo make install
>>>>> $ dmesg | grep 537
>>>>> $ stty -F /dev/modem -a
>>>>> $ dmesg | grep 537
>>>>>
>>>>> Yours truly,
>>>>>
>>>>> Philippe Vouters (Fontainebleau/France)
>>>>>
>>>>> URL: http://vouters.dyndns.org/
>>>>>
>>>>> SIP: sip:Vouters@xxxxxxxxxxxxxxxx
>>>>>
>>>>> Le 21/06/2012 19:36, Andrew Merczynski-Hait a écrit :
>>>>>
>>>>> $ dmesg | grep 536
>>>>>
>>>>> [    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144
>>>>> bytes)
>>>>>
>>>>> [    0.343343] TCP bind hash table entries: 65536 (order: 7, 524288
>>>>> bytes)
>>>>>
>>>>> [    0.343681] TCP: Hash tables configured (established 131072 bind
>>>>> 65536)
>>>>>
>>>>> [    0.736536] NET: Registered protocol family 17
>>>>>
>>>>> [    2.453621] sd 2:0:0:0: [sda] Write cache: disabled, read cache:
>>>>> enabled, doesn't support DPO or FUA
>>>>>
>>>>> [   15.780536] EXT4-fs (sda1): mounted filesystem with ordered data
>> mode.
>>>>> Opts: (null)
>>>>>
>>>>>
>>>>>
>>>>> I know you probably know what you?re doing J but I am using a 537 
>>>>> modem not
>>>>> 536 so I also did this:
>>>>>
>>>>>
>>>>>
>>>>> $ dmesg | grep 537
>>>>>
>>>>> [    0.647537] agpgart-intel 0000:00:00.0: Intel 865 Chipset
>>>>>
>>>>> [   19.664474] Intel 537EP card found
>>>>>
>>>>> [   19.664478] 537ep:softcore_init_struct: driver serial already
>>>>> allocated device.
>>>>>
>>>>> [   19.664482] 537ep:softcore_init_struct: Unregistering serial
driver.
>>>>>
>>>>>
>>>>>
>>>>> Thanks Andrew
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> From: Philippe Vouters [mailto:philippe.vouters@xxxxxxxxxxx]
>>>>> Sent: Thursday, June 21, 2012 4:17 AM
>>>>> To: Andrew Merczynski-Hait
>>>>> Cc: 'Jacques Goldberg'; 'Antonio Olivares'; 'Marvin Stodolsky'
>>>>> Subject: Re: Andrew, United States, kernel 3.0.0-12-generic
>>>>>
>>>>>
>>>>>
>>>>> Hi Andrew,
>>>>>
>>>>> Can you cut'n paste and send us the following:
>>>>> $ dmesg | grep 536
>>>>> Yours truly,
>>>>> Philippe
>>>>>
>>>>>
>>>>>
>>>>> Philippe Vouters (Fontainebleau/France)
>>>>>
>>>>> URL: http://vouters.dyndns.org/
>>>>>
>>>>> SIP: sip:Vouters@xxxxxxxxxxxxxxxx
>>>>>
>>>>> Le 21/06/2012 04:22, Andrew Merczynski-Hait a écrit :
>>>>>
>>>>> Hi all,
>>>>>
>>>>>
>>>>>
>>>>> I apologize for causing an issue and I really do appreciate your help.
>>>>> I do realize you have a lot to deal with. (Incidentally, I did 
>>>>> make sure to put uname ?r  in quotes, I just didn?t know they were 
>>>>> back
>>>>> quotes.)
>>>>>
>>>>>
>>>>>
>>>>> After copying over the autoconf.h file I seem to get a successful 
>>>>> build and install. However, gnome-ppp and wvdial still cannot see 
>>>>> that there is a modem installed. I see in the readme that for 
>>>>> unknown distributions the modules and utilities will install but 
>>>>> not the boot scripts. I presume that is probably an issue; can it 
>>>>> be fixed? Would it simplify things a lot if I installed a 
>>>>> different distro for the purpose
>>>> of using the modem?
>>>>> Thanks,
>>>>>
>>>>> Andrew
>>>>>
>>>>>
>>>>>
>>>>> From: Jacques Goldberg [mailto:goldberg@xxxxxxxxxxxxxxxxxxxx]
>>>>> Sent: Wednesday, June 20, 2012 1:41 PM
>>>>> To: Andrew Merczynski-Hait
>>>>> Cc: 'Antonio Olivares'; 'Philippe Vouters'; 'Marvin Stodolsky'
>>>>> Subject: Re: Andrew, United States, kernel 3.0.0-12-generic
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>
>
>





[Index of Archives]     [Linux Media Development]     [Asterisk]     [DCCP]     [Netdev]     [X.org]     [Xfree86]     [Fedora Women]     [Linux USB]

  Powered by Linux