Re: At commands

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]


If your major interest is Voice, why not install SKYPE, for which the
related problems have already been worked out?  Members of this List
have been interested in Internet CONNECTs, and have not played with
the ordinary phone angle.  You are on your own in that arena.

MarvS



On Wed, Apr 25, 2012 at 9:05 AM, Spazzatura.Live <kharhonte@xxxxxxxxxxx> wrote:
> However, I don't really care about the dialing, I can solve other way. I'd
> really appreciate if you can help me with full duplex voice and the ascii
> code sequence to stop receiving ('cause now I'm closing it restarting the
> daemon).
>
> Thanks.
> Cheers,
> Stefano
>
> Il 25/04/2012 14:03, Spazzatura.Live ha scritto:
>
>> I already tried wvdial, but it seems to be just for ip connection on
>> internet (which i really don't need).
>>
>> I'm using slmodemd since the first time, the config file has the same
>> arguments you suggested me (except for the country one because I'm in Italy
>> so it's "-c ITALY")
>>
>> Why should i use chatscript? Can't I go on with "minicom" and 'echo -en
>> "ATCOMMAND\r" > /dev/ttySL0 && read -t1 < /dev/ttySL0 && echo "$REPLY"'?
>>
>> Il 25/04/2012 04:09, Marvin Stodolsky ha scritto:
>>>
>>> After (if necessary)
>>> # modprobe snd-intel8x0m
>>> activate your modem with:
>>> #  slmodemd -c USA --alsa  modem:1
>>>
>>> You could setup a chatscript to manage the dialout,
>>> wherein you could put the line:
>>> Carrier check = no
>>> Search out the documentation on chatscript usage.
>>>
>>> If you can install the wvdialconf package, a good first sanity test
>>> (with slmodemd left running) is
>>> # wvdialconf
>>> which should report finding the modem.
>>> # wvdial
>>> is what we recommend for managing routine IP CONNECTs for Internet usage.
>>>
>>> MarvS
>>>
>>>
>>> On Tue, Apr 24, 2012 at 7:47 PM, Spazzatura.Live<kharhonte@xxxxxxxxxxx>
>>>  wrote:
>>>>
>>>> Sorry, forgot it.
>>>>
>>>> However it was just a mistake, it's Gentoo x86, not AMD64, confused my
>>>> laptop with my desktop (AMD64 from which I'm writing now...)
>>>>
>>>> Il 24/04/2012 22:42, Marvin Stodolsky ha scritto:
>>>>>
>>>>>  The ModemData.txt wasn't attached.
>>>>>
>>>>>  Also just noticed your platform is x86_64 AMD
>>>>>  while snd-intel8x0m will work, slamr cannot be used because it has a
>>>>>  precompiled 32 bit component
>>>>>
>>>>>  MarvS
>>>>>
>>>>>  On Tue, Apr 24, 2012 at 4:30 PM,
>>>>> Spazzatura.Live<kharhonte@xxxxxxxxxxx>
>>>>> wrote:
>>>>>>
>>>>>>  Here's my ModemData.txt
>>>>>>
>>>>>>  I don't need the whole set of AT commands, just the one who disable
>>>>>> the
>>>>>>  carrier detecting, the full duplex audio transmission and the "stop
>>>>>>  receiving" code...
>>>>>>
>>>>>>  The first one is optional because if I wanna make a call, I can just
>>>>>> record
>>>>>>  the number's tone and make a script to call them in the right order
>>>>>> from
>>>>>> the
>>>>>>  number... But it's a un-fency solution...
>>>>>>
>>>>>>  Il 24/04/2012 21:27, Marvin Stodolsky ha scritto:
>>>>>>
>>>>>>>  Send to the List (not me), the ModemData.txt file output when you
>>>>>>> run
>>>>>>>  ./scanModem
>>>>>>>
>>>>>>>  With respect to the AT commands, many drivers under Linux do not
>>>>>>> have
>>>>>>>  the full AT set implemented.
>>>>>>>
>>>>>>>  MarvS
>>>>>>>
>>>>>>>  On Tue, Apr 24, 2012 at 2:45 PM,
>>>>>>> Spazzatura.Live<kharhonte@xxxxxxxxxxx>
>>>>>>>   wrote:
>>>>>>>>
>>>>>>>>  Since now it had not any die, however I built it as module and run
>>>>>>>>  scanModem. Should i put the output here?
>>>>>>>>  "Carrier check = no", where should I put it? The only configuration
>>>>>>>> file
>>>>>>>>  I
>>>>>>>>  have (apart from udev's...) is from slmodem daemon
>>>>>>>> (/etc/conf.d/slmodem).
>>>>>>>>
>>>>>>>>  Thanks a lot for your time!
>>>>>>>>  Cheers,
>>>>>>>>  Stefano
>>>>>>>>
>>>>>>>>  Il 24/04/2012 16:07, Marvin Stodolsky ha scritto:
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>  get scanModem  and run, to output instructions.
>>>>>>>>>  snd-intel8xom driver should be a module, as unloading and
>>>>>>>>> reloading
>>>>>>>>> is
>>>>>>>>>  necessary, when the loaded driver dies occasionally.
>>>>>>>>>  Carrier check = no
>>>>>>>>>  Is necessary in some config file.
>>>>>>>>>
>>>>>>>>>  More later, now on cellphone.
>>>>>>>>>  MarvS
>>>>>>>>>
>>>>>>>>>  On Apr 24, 2012 8:44 AM, "Spazzatura.Live"<kharhonte@xxxxxxxxxxx
>>>>>>>>> <mailto:kharhonte@xxxxxxxxxxx>>       wrote:
>>>>>>>>>
>>>>>>>>>     Hi everyone!
>>>>>>>>>
>>>>>>>>>     I'm trying to make my modem work as phone but I found a lot of
>>>>>>>>> issue:
>>>>>>>>>
>>>>>>>>>     I don't know the AT command to stop AT+VRX.
>>>>>>>>>
>>>>>>>>>     Don't know how to do full duplex:
>>>>>>>>>     (if i use AT+VTX+VRX it let me just send, AT+VRX+VTX just
>>>>>>>>> receive)
>>>>>>>>>
>>>>>>>>>     Need a full AT command list but really don't know where to find
>>>>>>>>> it
>>>>>>>>>     after hours and hours of research...
>>>>>>>>>
>>>>>>>>>     When i try to call someone:
>>>>>>>>>     AT+FCLASS=8\r
>>>>>>>>>     AT+VLS=1\r
>>>>>>>>>     ATD<NUMBER>;\r (or ATD<NUMBER>\r)
>>>>>>>>>     It starts calling, but if i give ANY command it tells me: "NO
>>>>>>>>>     CARRIER" and stop calling... I don't know how to disable
>>>>>>>>> carrier
>>>>>>>>>     detection and ATS10=255 doesn't work. (Even some other commands
>>>>>>>>> i
>>>>>>>>>     tried [AT&C0/1] etc...)
>>>>>>>>>
>>>>>>>>>     I'm really going mad!
>>>>>>>>>
>>>>>>>>>     These are my informations:
>>>>>>>>>
>>>>>>>>>     lspci:
>>>>>>>>>        00:1f.6 Modem: Intel Corporation 82801BA/BAM AC'97 Modem
>>>>>>>>>     Controller (rev 05)
>>>>>>>>>
>>>>>>>>>     Product data:
>>>>>>>>>        Vendor=8086
>>>>>>>>>        Product=2446
>>>>>>>>>
>>>>>>>>>     Chip=SmartLink SmartRISER561 ACR,AMR,CNR,MDC,Mini-PCI V.92 Soft
>>>>>>>>> ?
>>>>>>>>>     (Maybe) ?
>>>>>>>>>
>>>>>>>>>     Driver (that seems to fit):
>>>>>>>>>        slmodem - http://wiki.debian.org/it/slmodem (8086:2446)
>>>>>>>>>        INTEL AC-Link Controller (ICH) - Linuxant HSF softmodem -
>>>>>>>>>     http://www.linuxant.com/drivers/hsf/index.php (8086:2446)
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> http://www.modem-help.co.uk/search.php?id=PCI\VEN_8086%26DEV_2446#results
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> <http://www.modem-help.co.uk/search.php?id=PCI%5CVEN_8086%26DEV_2446#results>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>     ATI ->       SmartLink Soft Modem
>>>>>>>>>     ATI1 ->       SmartLink Soft Modem, 2.9.11<cr>Smart Link Ltd.
>>>>>>>>>     ATI2 ->       Like ATI1
>>>>>>>>>     ATI3 ->       modem:1<cr>alsa modem driver
>>>>>>>>>
>>>>>>>>>     Kernel driver=snd_intel8x0m (builtin)
>>>>>>>>>
>>>>>>>>>     Software:
>>>>>>>>>        slmodem-2.9.11-20110321
>>>>>>>>>        ungrab-winmodem-2009-07-16
>>>>>>>>>        Installed through customizing ebuild from
>>>>>>>>>     http://gpo.zugaina.org/net-dialup/slmodem with latest version
>>>>>>>>>     package and removing PCI_LEGACY check.
>>>>>>>>>
>>>>>>>>>     OS:
>>>>>>>>>        Gentoo AMD64 up-to-date
>>>>>>>>>
>>>>>>>>>     Thanks for help.
>>>>>>>>>
>>>>>>>>>     Cheers,
>>>>>>>>>     Stefano
>>>>>>>>>
>>>
>>
>>
>



[Linux DVB]     [Asterisk]     [Photo]     [DCCP]     [Netdev]     [Xorg]     [Xfree86]     [Fedora Women]     [Linux USB]

Powered by Linux