Re: intel 537. system halted

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Dear folks,

I have overlooked an important part of ModemData.txt:

========================================
Predictive  diagnostics for card in bus 04:02.0:
               Modem chipset  detected on
NAME="Modem: SILICON Laboratories Intel 537 [Winmodem] "
CLASS=0703
PCIDEV=1543:3052
SUBSYS=1543:3000
IRQ=17
HDA2=00:1b.0
IDENT=Not_supported_under_Linux

For candidate modem in:  04:02.0
  0703 Modem: SILICON Laboratories Intel 537 [Winmodem]
      Primary device ID:  1543:3052
Support type needed or chipset:            Not_supported_under_Linux
========================================

Your modem is NOT SUPPORTED under Linux :(
This is why it is freezing.  If you try the latest driver and you can
get a contradiction, then please let us know about it.

@Phillipe,
Sorry for overlooking this detail.

Regards,

Antonio


On Fri, Apr 13, 2012 at 7:10 AM, Antonio Olivares
<olivares14031@xxxxxxxxx> wrote:
> Camilo,
>
> Have you tried the latest version from Phillipe?
>
> http://vouters.dyndns.org/Intel/intel-536EP-537EP_2012_02_29.tar.bz2
>
> Give it a try and report back letting us know if it still freezes?
>
> Regards,
>
> Antonio
>
> On Fri, Apr 13, 2012 at 1:45 AM, camilo ernesto blanco peña
> <caerbp@xxxxxxxxx> wrote:
>> Hi:
>>
>> I am trying to install the intel 537 modem under Ubuntu Oneiric. I am
>> following the linmodem, Philippe Vouters and other guides. I have experience
>> with Agere and Conexant modem but I need to install a intel 537.
>>
>> I have the intel 537 code, it was downloaded from:
>> <http://vouters.dyndns.org/Intel/intel-536EP-537EP_2011_12_11.tar.bz2>
>>
>> I solved the problem with Ubuntu distributions about the autoconf.h missing.
>> My solution is:
>> ln -sf /lib/modules/3.0.0-16-generic/build/include/generated/autoconf.h
>> /lib/modules/3.0.0-16-generic/build/include/linux/autoconf.h
>>
>> Also, I edited the 537_inst script and modified the "Kernel Version"
>> detection for to accept the version 3.x, see:
>>   2.6* | 3.*)
>>      KMS="ko"  # Kernel Module Suffix
>>      ;;
>>
>> The code was compiled successfully BUT the wvdialconf don't detect my modem.
>> I edited the wvdial.conf with the requirement options manually and executed
>> the wvdial BUT the system is halted (freezes).
>>
>> I tested with other version with the same result; they are like:
>> intel-536EP-537EP_2012_01_04.tar.bz2
>> intel-536EP-537EP_2012_02_29.tar.bz2
>>
>> I put all actions, results and the ModemData.txt content below.
>>
>> Is incredible but I am using Windows for to navigate and Linux for to work.
>> The solution? Restarting and restarting... :-(
>>
>> Please, any suggestion is welcome...
>>
>> Regards...
>>
>> /* "lspci | egrep Modem" action */
>> root@alcam:/usr/src/intel-536-537# lspci | egrep Modem
>> 04:02.0 Modem: SILICON Laboratories Intel 537 [Winmodem] (rev 04)
>>
>> /* "lspci -n" action */
>> root@alcam:/usr/src/intel-536-537# lspci -n
>> 00:00.0 0600: 8086:2e30 (rev 03)
>> 00:01.0 0604: 8086:2e31 (rev 03)
>> 00:1b.0 0403: 8086:27d8 (rev 01)
>> 00:1c.0 0604: 8086:27d0 (rev 01)
>> 00:1c.1 0604: 8086:27d2 (rev 01)
>> 00:1d.0 0c03: 8086:27c8 (rev 01)
>> 00:1d.1 0c03: 8086:27c9 (rev 01)
>> 00:1d.2 0c03: 8086:27ca (rev 01)
>> 00:1d.3 0c03: 8086:27cb (rev 01)
>> 00:1d.7 0c03: 8086:27cc (rev 01)
>> 00:1e.0 0604: 8086:244e (rev e1)
>> 00:1f.0 0601: 8086:27b8 (rev 01)
>> 00:1f.1 0101: 8086:27df (rev 01)
>> 00:1f.2 0101: 8086:27c0 (rev 01)
>> 00:1f.3 0c05: 8086:27da (rev 01)
>> 01:00.0 0300: 10de:0640 (rev a1)
>> 03:00.0 0200: 10ec:8168 (rev 03)
>> 04:02.0 0703: 1543:3052 (rev 04)  <=== 537EP
>> *** 1543:3052 is the vendor of 537EP (detected in makefile_537)
>>
>> /* "make 537" action */
>> root@alcam:/usr/src/intel-536-537# make 537
>> cd coredrv; make clean
>> make[1]: se ingresa al directorio «/usr/src/intel-536-537/coredrv»
>> rm -f *.ko .*.o.cmd *.mod.c .*.ko.cmd *.o *~ core Module.* modules.*
>> rm -rf .tmp_versions
>> make[1]: se sale del directorio «/usr/src/intel-536-537/coredrv»
>> rm -f *.o *.ko
>>   Module precompile check
>>   Current running kernel is: 3.0.0-16-generic
>>   /lib/modules...   autoconf.h exists
>> diff: /boot/vmlinuz.autoconf.h: No existe el archivo o el directorio
>>   autoconf.h matches running kernel
>> diff: /boot/vmlinuz.version.h: No existe el archivo o el directorio
>>   version.h matches running kernel
>> make[1]: se ingresa al directorio «/usr/src/intel-536-537»
>> Building for 537EP
>> 3.0.0-16-generic
>> make[2]: se ingresa al directorio «/usr/src/intel-536-537/coredrv»
>> make -C /lib/modules/3.0.0-16-generic/build M=/usr/src/intel-536-537/coredrv
>> modules
>> make[3]: se ingresa al directorio «/usr/src/linux-headers-3.0.0-16-generic»
>>  CC [M]  /usr/src/intel-536-537/coredrv/coredrv.o
>>  CC [M]  /usr/src/intel-536-537/coredrv/clmmain.o
>>  CC [M]  /usr/src/intel-536-537/coredrv/rts.o
>>  CC [M]  /usr/src/intel-536-537/coredrv/task.o
>>  CC [M]  /usr/src/intel-536-537/coredrv/uart.o
>>  CC [M]  /usr/src/intel-536-537/coredrv/wwh_dflt.o
>>  CC [M]  /usr/src/intel-536-537/coredrv/locks.o
>>  CC [M]  /usr/src/intel-536-537/coredrv/softserial_io.o
>>  CC [M]  /usr/src/intel-536-537/coredrv/softserial_ioctl.o
>>  CC [M]  /usr/src/intel-536-537/coredrv/softserial.o
>>  CC [M]  /usr/src/intel-536-537/coredrv/afedsp_int.o
>>  LD [M]  /usr/src/intel-536-537/coredrv/Intel537.o
>>  Building modules, stage 2.
>>  MODPOST 1 modules
>> WARNING: could not find /usr/src/intel-536-537/coredrv/.537core.lib.cmd for
>> /usr/src/intel-536-537/coredrv/537core.lib
>>  CC      /usr/src/intel-536-537/coredrv/Intel537.mod.o
>>  LD [M]  /usr/src/intel-536-537/coredrv/Intel537.ko
>> make[3]: se sale del directorio «/usr/src/linux-headers-3.0.0-16-generic»
>> make[2]: se sale del directorio «/usr/src/intel-536-537/coredrv»
>> make[1]: se sale del directorio «/usr/src/intel-536-537»
>>
>> /* "make install" action */
>> root@alcam:/usr/src/intel-536-537# make install
>> make[1]: se ingresa al directorio «/usr/src/intel-536-537»
>> rm -f /usr/sbin/hamregistry.bin
>> bash 537_inst
>> running kernel 3.0.0-16-generic
>> installing hamregistry, used for persistant storage
>> installing usrsound, a soft buzzer
>> installing 537 module
>> install UBUNTU 537 boot script and links
>> starting module and utilities
>> done
>> make[1]: se sale del directorio «/usr/src/intel-536-537»
>>
>> /* "ls /dev/modem" action */
>> root@alcam:/usr/src/intel-536-537# ls -l /dev/modem
>> lrwxrwxrwx 1 root root 10 2012-04-12 16:20 /dev/modem -> /dev/537ep
>>
>> /* "hamregistry" process status */
>> root@alcam:/usr/src/intel-536-537# ps aux | egrep hamreg
>> root      4304  0.0  0.0   1824   240 pts/1    S    17:09   0:00
>> /usr/sbin/hamregistry
>> root      4310  0.0  0.0   5680   796 pts/1    S+   17:09   0:00 egrep
>> --color=auto hamreg
>>
>> /* "usrsound" process status */
>> root@alcam:/usr/src/intel-536-537# ps aux | egrep usrsound
>> root      5236  0.0  0.0   1944   288 ?        Ss   17:24   0:00
>> /usr/sbin/usrsound
>> root      5271  0.0  0.0   5680   800 pts/1    S+   17:27   0:00 egrep
>> --color=auto usrsound
>>
>> /* "537_boot status" action */
>> root@alcam:/usr/src/intel-536-537# /etc/init.d/537_boot status
>>  PID TTY          TIME CMD
>> 5233 pts/1    00:00:00 hamregistry
>>  PID TTY          TIME CMD
>> 5236 ?        00:00:00 usrsound
>>
>> /* "uname -r" action */
>> root@alcam:/usr/src/intel-536-537# uname -r
>> 3.0.0-16-generic
>>
>> /* "ModemData.txt" content: generated by the scanModem script */
>> Only plain text email is forwarded by the  Discuss@xxxxxxxxxxxxx List
>> Server,
>> as HTML can contain viruses. Use as the email Subject Line:
>>           YourName, YourCountry  kernel 3.0.0-16-generic
>>  With this Subject Line cogent experts will be alerted, and useful case
>> names left in the Archive.
>> YourCountry will enable Country specific guidance. Linux experts in
>> YourCountry
>>  can be found through: http://www.linux.org/groups/index.html.
>> They will know your Country's modem code, which may be essential for dialup
>> service.
>> Responses from Discuss@xxxxxxxxxxxxx are sometimes blocked by an Internet
>> Provider mail filters.
>> So in a day, also check the Archived responses at http://www.linmodems.org
>> --------------------------  System information ----------------------------
>> CPU=x86_64,  Ubuntu ,  ALSA_version=1.0.24
>> Linux version 3.0.0-16-generic (buildd@allspice) (gcc version 4.6.1
>> (Ubuntu/Linaro 4.6.1-9ubuntu3) ) #28-Ubuntu SMP Fri Jan 27 17:44:39 UTC 2012
>> scanModem update of:  2011_08_08
>>
>> Distrib_ID=Ubuntu
>> DistribCodeName=oneiric
>> AptRepositoryStem=http://192.168.1.2/mirror/
>>
>>
>> The dkms driver upgrade utilities are installed,
>>
>>
>> Some modem drivers can only be used in 32 bit modem on x86_64 systems,
>> while some others are competent on x86_64 Systems.  Cases are:
>> 1) http://linmodems.technion.ac.il/bigarch/archive-seventh/msg03119.html
>> for the snd-hda-intel audio+modem driver. Also applicable to AC97 modem
>> controllers.
>> In both cases, 32 bit libraries must be installed to support the slmodemd
>> helper having a precompiled 32 bit component.
>> 2) For USB modems using the slusb.ko driver. 32 bit libraries must be
>> installed to support the slmodemd helper having a precompiled 32 bit
>> component
>> 3) The hsfmodem and hcfpcimodem drivers for Conexant chipsest modes are
>> x86_64 competent.
>> 4) agrsm packages for LSI/AgereSystems softmodems are not competent on
>> x86_64 systems.
>>
>> There are no blacklisted modem drivers in /etc/modprobe*  files
>>
>> Potentially useful modem drivers now loaded are:
>>       snd_hda_intel
>>
>> Attached USB devices are:
>> ID 15d9:0a4c Trust International B.V. USB+PS/2 Optical Mouse
>> ID 046d:c31c Logitech, Inc. Keyboard K120 for Business
>> If a cellphone is not detected, see
>> http://ubuntuforums.org/archive/index.php/t-878554.html
>> A sample report is:
>> http://linmodems.technion.ac.il/bigarch/archive-nineth/msg00578.html
>>
>> If a USB modem or cellphone is attached and was not detected, please
>> provide available information in your request to discuss@xxxxxxxxxxxxx
>>
>> Candidate PCI devices with modem chips are:
>> 04:02.0 Modem: SILICON Laboratories Intel 537 [Winmodem] (rev 04)
>> 00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition
>> Audio Controller (rev 01)
>> High Definition Audio cards can host modem chips.
>>
>> For candidate card in slot 04:02.0, firmware information and bootup
>> diagnostics are:
>> PCI slot PCI ID                   SubsystemID     Name
>> ----------               --------- --------- --------------
>> 04:02.0 1543:3052           1543:3000           Modem: SILICON Laboratories
>> Intel 537 [Winmodem]
>>
>> Modem interrupt assignment and sharing:
>>  --- Bootup diagnostics for card in PCI slot 04:02.0 ----
>> [    0.436109] pci 0000:04:02.0: [1543:3052] type 0 class 0x000703
>> [    0.436129] pci 0000:04:02.0: reg 10: [mem 0xfebff000-0xfebfffff]
>> [    0.436142] pci 0000:04:02.0: reg 14: [io  0xe800-0xe8ff]
>> [    0.436214] pci 0000:04:02.0: PME# supported from D0 D3hot D3cold
>> [    0.436219] pci 0000:04:02.0: PME# disabled
>> [    0.836595] serial 0000:04:02.0: PCI INT A -> GSI 17 (level, low) -> IRQ
>> 17
>> [    0.836603] serial 0000:04:02.0: PCI INT A disabled
>>
>> The PCI slot 04:02.0 of the modem card may be disabled early in
>>  a bootup process,  but then enabled later. If modem drivers load
>>  but the  modem is not responsive, read DOCs/Bootup.txt about possible
>> fixes.
>> Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx
>> if help is needed.
>>
>>
>> For candidate card in slot 00:1b.0, firmware information and bootup
>> diagnostics are:
>> PCI slot PCI ID                   SubsystemID     Name
>> ----------               --------- --------- --------------
>> 00:1b.0 8086:27d8           1565:810b           Audio device: Intel
>> Corporation N10/ICH 7 Family High Definition Audio Controller
>>
>> Modem interrupt assignment and sharing:
>>  16:      15622       1262        277        286   IO-APIC-fasteoi
>> uhci_hcd:usb5, hda_intel, nvidia
>> --- Bootup diagnostics for card in PCI slot 00:1b.0 ----
>> [    0.428283] pci 0000:00:1b.0: [8086:27d8] type 0 class 0x000403
>> [    0.428300] pci 0000:00:1b.0: reg 10: [mem 0xf9ffc000-0xf9ffffff 64bit]
>> [    0.428359] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
>> [    0.428363] pci 0000:00:1b.0: PME# disabled
>> [   11.022104] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) ->
>> IRQ 16
>> [   11.022176] HDA Intel 0000:00:1b.0: irq 44 for MSI/MSI-X
>> [   11.022212] HDA Intel 0000:00:1b.0: setting latency timer to 64
>>
>> The PCI slot 00:1b.0 of the modem card may be disabled early in
>>  a bootup process,  but then enabled later. If modem drivers load
>>  but the  modem is not responsive, read DOCs/Bootup.txt about possible
>> fixes.
>> Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx
>> if help is needed.
>>
>>
>> For 1543:3052 chipset modems, support under Linux has not been established
>> === Finished firmware and bootup diagnostics, next deducing cogent software.
>> ===
>>
>> Predictive  diagnostics for card in bus 04:02.0:
>>                Modem chipset  detected on
>> NAME="Modem: SILICON Laboratories Intel 537 [Winmodem] "
>> CLASS=0703
>> PCIDEV=1543:3052
>> SUBSYS=1543:3000
>> IRQ=17
>> HDA2=00:1b.0
>> IDENT=Not_supported_under_Linux
>>
>> For candidate modem in:  04:02.0
>>   0703 Modem: SILICON Laboratories Intel 537 [Winmodem]
>>      Primary device ID:  1543:3052
>> Support type needed or chipset:            Not_supported_under_Linux
>>
>>
>>
>> Writing DOCs/Intel.txt
>>
>>
>> Predictive  diagnostics for card in bus 00:1b.0:
>>                Modem chipset not detected on
>> NAME="Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio
>> Controller "
>> CLASS=0403
>> PCIDEV=8086:27d8
>> SUBSYS=1565:810b
>> IRQ=16
>>
>> For candidate modem in:  00:1b.0
>>   0403 Audio device: Intel Corporation N10/ICH 7 Family High Definition
>> Audio Controller
>>      Primary device ID:  8086:27d8
>> Support type needed or chipset:
>>
>>
>> Completed candidate modem analyses.
>>
>> The base of the UDEV device file system is: /dev/.udev
>>
>> Versions adequately match for the compiler installed: 4.6.1
>>             and the compiler used in kernel assembly: 4.6.1
>>
>> linux-headers-3.0.0-16-generic resources needed for compiling are not
>> manifestly ready!
>>
>> If compiling is necessary packages must be installed, providing:
>>                linux-headers-3.0.0-16-generic
>>
>>
>> If a driver compilation fails, with message including some lack of some
>> FileName.h (stdio.h for example), then
>> Some additional kernel-header files need installation to /usr/include. The
>> minimal additional packages are libc6-dev
>> and any of its dependents, under Ubuntu linux-libc-dev
>>
>> If an alternate ethernet connection is available,
>> $  apt-get update
>> $  apt-get -s install linux-kernel-devel
>> will install needed packages.
>> For Debian/Ubuntu related distributions, run the following command to
>> display the needed package list:
>>
>> Otherwise packages have to be found through http://packages.ubuntu.com
>> Once downloaded and transferred into a Linux partition,
>> they can be installed alltogether with:
>> $ sudo dpkg -i *.deb
>>
>> Checking settings of:     /etc/ppp/options
>> asyncmap 0
>> noauth
>> crtscts
>> lock
>> hide-password
>> modem
>> lcp-echo-interval 30
>> lcp-echo-failure 4
>> noipx
>>
>> In case of a message like:
>>   Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
>> see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html
>>
>> For guidance on FAX usage, get from
>> http://linmodems.technion.ac.il/packages/  get faxing.tar.gz
>> It has samples for a modem using port /dev/ttySL0, which must be changed to
>> match your modem's port.
>>
>> Read Modem/DOCs/YourSystem.txt concerning other COMM channels: eth0 vmnet1
>> vmnet8
>> Which can interfere with Browser naviagation.
>>
>> Don't worry about the following, it is for experts should trouble shooting
>> be necessary.
>> ==========================================================
>>
>> Checking for modem support lines:
>> --------------------------------------
>>     /device/modem symbolic link:
>> slmodemd created symbolic link /dev/ttySL0:
>>     Within /etc/udev/ files:
>>
>>     Within /etc/modprobe.conf files:
>> /etc/modprobe.d/blacklist-modem.conf:# Uncomment these entries in order to
>> blacklist unwanted modem drivers
>> /etc/modprobe.d/blacklist-modem.conf:# blacklist snd-atiixp-modem
>> /etc/modprobe.d/blacklist-modem.conf:# blacklist snd-via82xx-modem
>> /etc/modprobe.d/alsa-base.conf:options snd-atiixp-modem index=-2
>> /etc/modprobe.d/alsa-base.conf:options snd-via82xx-modem index=-2
>>     Within any ancient /etc/devfs files:
>>
>>     Within ancient kernel 2.4.n /etc/module.conf files:
>>
>> --------- end modem support lines --------
>>
>>



[Index of Archives]     [Linux Media Development]     [Asterisk]     [DCCP]     [Netdev]     [X.org]     [Xfree86]     [Fedora Women]     [Linux USB]

  Powered by Linux