Re: intel 537 with kernel 3.1.x

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Sorry I should have mentioned I flipped the card back to the old slot...I figured it the HCF modem worked in that old slot then there is no reason as far as IRQ is to get this modem to work.



On Thu, Jan 05, 2012 at 10:09:31PM +0100, Philippe Vouters wrote:
> Patrick,
> 
> Excellent ! You do reproduce the Call Trace with a simple efax. I
> feel much more confident toward a quick solution which will satisfy
> you.
> 
> I do notice your "Disabling IRQ #19" ! Why #19 which is occupied by
> other hardware components as per your previous cat /proc/interrupts
> and not #20 as you told me you moved the 537 modem board to another
> PCI slot ???
> Can you sched me more light upon this ?
> 
> Philippe
> 
> Le 05/01/2012 21:44, Patrick Boyadjian a écrit :
> >Thanks Philippe,
> >
> >I am certain I have a single core that is multithreaded as I have built it many years ago.
> >
> >Here is the output of ./efax -vewinchmart
> >
> >[root@pb3000 efax]# ./efax -vewinchmart
> >./efax: Thu Jan  5 15:40:42 2012 efax v 0.9a-001114 Copyright 1999 Ed Casas
> >./efax: Thu Jan  5 15:40:42 2012 efax v 0.9a-001114 Copyright 1999 Ed Casas
> >efax: 40:42 compiled Jan  5 2012 15:13:30
> >efax: 40:42 argv[0]=./efax
> >efax: 40:42 argv[1]=-vewinchmart
> >efax: 40:42 using built-in 128x0 font
> >efax: 40:43 opened /dev/modem
> >efax: 40:43 command  "Q0V1"
> >efax: 40:43 waiting 2.0 s
> >efax: 40:44 .681 [ATQ0V1<CR><CR><LF>]
> >efax: 40:44 .741 [OK<CR><LF>]
> >efax: 40:44 response "OK"
> >efax: 40:44 command  "E0"
> >efax: 40:44 waiting 5.0 s
> >efax: 40:44 .761 [ATE0<CR><CR><LF>]
> >efax: 40:44 .811 [OK<CR><LF>]
> >efax: 40:44 response "OK"
> >efax: 40:44 command  "I3"
> >efax: 40:44 waiting 5.0 s
> >efax: 40:44 .861 [<CR><LF>537EP<CR><LF>]
> >efax: 40:44 .881 [<CR><LF>OK<CR><LF>]
> >efax: 40:44 response "OK"
> >efax: 40:44 command  "+FCLASS=?"
> >efax: 40:44 waiting 5.0 s
> >efax: 40:44 .931 [<CR><LF>0,1,2,2.0,8<CR><LF>]
> >efax: 40:44 .951 [<CR><LF>OK<CR><LF>]
> >efax: 40:44 response "OK"
> >efax: 40:44 command  "+FCLASS=2.0"
> >efax: 40:44 waiting 5.0 s
> >efax: 40:45 .021 [<CR><LF>OK<CR><LF>]
> >efax: 40:45 response "OK"
> >efax: 40:45 command  "+FMI?"
> >efax: 40:45 waiting 5.0 s
> >efax: 40:45 .071 [<CR><LF>Intel Corporation<CR><LF>]
> >efax: 40:45 .091 [<CR><LF>OK<CR><LF>]
> >efax: 40:45 response "OK"
> >efax: 40:45 command  "+FMM?"
> >efax: 40:45 waiting 5.0 s
> >efax: 40:45 .141 [<CR><LF>Intel V92 Data Fax Voice<CR><LF>]
> >efax: 40:45 .142 [<CR><LF>H.324 video-ready rev. 1.0<CR><LF>]
> >efax: 40:45 .161 [<CR><LF>OK<CR><LF>]
> >efax: 40:45 response "OK"
> >efax: 40:45 command  "+FMR?"
> >efax: 40:45 waiting 5.0 s
> >efax: 40:45 .211 [<CR><LF>RSA REV 4.04<CR><LF>]
> >efax: 40:45 .231 [<CR><LF>OK<CR><LF>]
> >efax: 40:45 response "OK"
> >efax: 40:45 using 537EP Intel Corporation Intel V92 Data Fax Voice RSA REV 4.04 in class 2.0
> >efax: 40:45 command  "+FIP"
> >efax: 40:45 waiting 5.0 s
> >efax: 40:45 .291 [<CR><LF>ERROR<CR><LF>]
> >efax: 40:45 response "ERROR"
> >efax: 40:45 Warning: wrong response after command:  +FIP
> >efax: 40:45 command  "+FNR=1,1,1,0"
> >efax: 40:45 waiting 5.0 s
> >efax: 40:45 .361 [<CR><LF>OK<CR><LF>]
> >efax: 40:45 response "OK"
> >efax: 40:45 command  "+FLO=1"
> >efax: 40:45 waiting 5.0 s
> >efax: 40:45 .431 [<CR><LF>OK<CR><LF>]
> >efax: 40:45 response "OK"
> >efax: 40:45 command  "+FBO=0"
> >efax: 40:45 waiting 5.0 s
> >efax: 40:45 .501 [<CR><LF>OK<CR><LF>]
> >efax: 40:45 response "OK"
> >efax: 40:45 command  "+FCR=1"
> >efax: 40:45 waiting 5.0 s
> >efax: 40:45 .571 [<CR><LF>OK<CR><LF>]
> >efax: 40:45 response "OK"
> >efax: 40:45 command  "+FIS?"
> >efax: 40:45 waiting 5.0 s
> >efax: 40:45 .721 [<CR><LF>1,5,0,2,0,0,0,0<CR><LF>]
> >efax: 40:45 .741 [<CR><LF>OK<CR><LF>]
> >efax: 40:45 response "OK"
> >efax: 40:45 command  "+FLI="                    ""
> >efax: 40:45 waiting 5.0 s
> >efax: 40:45 .911 [<CR><LF>OK<CR><LF>]
> >efax: 40:45 response "OK"
> >efax: 40:45 command  "A"
> >efax: 40:45 waiting 120.0 s
> >
> >Message from syslogd@pb3000 at Jan  5 15:40:47 ...
> >  kernel:[ 5123.808623] Disabling IRQ #19
> >
> >efax: 42:16 .671 [<CR><LF>NO CARRIER<CR><LF>]
> >efax: 42:16 response "NO CARRIER"
> >efax: 42:16 Error: unable to answer call
> >efax: 42:16 command  "Q0V1"
> >efax: 42:16 waiting 2.0 s
> >efax: 42:16 .751 [<CR><LF>OK<CR><LF>]
> >efax: 42:16 response "OK"
> >efax: 42:16 command  "H"
> >efax: 42:16 waiting 5.0 s
> >efax: 42:17 .621 [<CR><LF>OK<CR><LF>]
> >efax: 42:17 response "OK"
> >efax: 42:17 done, returning 3 (invalid modem response)
> >
> >
> >
> >and the output from subsequent dmesg:
> >
> >
> >[  583.232354] Intel 537 card found
> >[  583.240834] 8021q: 802.1Q VLAN Support v1.8
> >[  592.290014] br0: no IPv6 routers present
> >[  592.338009] p3p1: no IPv6 routers present
> >[ 2501.619746] pci 0000:01:01.0: PCI INT A ->  GSI 19 (level, low) ->  IRQ 19
> >[ 2501.641799] 537: Loaded
> >[ 5119.557097] 537: Loaded
> >[ 5123.808126] irq 19: nobody cared (try booting with the "irqpoll" option)
> >[ 5123.808185] Pid: 0, comm: swapper Not tainted 3.1.6-1.fc16.i686 #1
> >[ 5123.808188] Call Trace:
> >[ 5123.808199]  [<c090411b>] ? printk+0x2d/0x2f
> >[ 5123.808206]  [<c04af1b9>] __report_bad_irq+0x29/0xd0
> >[ 5123.808211]  [<c04af41e>] note_interrupt+0x11e/0x1d0
> >[ 5123.808324]  [<f9e1b367>] ? AfeIRQ+0x17/0x40 [Intel537]
> >[ 5123.808330]  [<c04afba0>] ? unmask_irq+0x30/0x30
> >[ 5123.808334]  [<c04ad79e>] handle_irq_event_percpu+0x9e/0x200
> >[ 5123.808339]  [<c04afba0>] ? unmask_irq+0x30/0x30
> >[ 5123.808343]  [<c04ad932>] handle_irq_event+0x32/0x60
> >[ 5123.808348]  [<c04afba0>] ? unmask_irq+0x30/0x30
> >[ 5123.808352]  [<c04afbe7>] handle_fasteoi_irq+0x47/0xb0
> >[ 5123.808355]<IRQ>   [<c0404d02>] ? do_IRQ+0x42/0xc0
> >[ 5123.808367]  [<c0452f49>] ? irq_exit+0x69/0xa0
> >[ 5123.808373]  [<c041e509>] ? smp_apic_timer_interrupt+0x59/0x90
> >[ 5123.808379]  [<c09148b0>] ? common_interrupt+0x30/0x38
> >[ 5123.808385]  [<c091007b>] ? kprobe_exceptions_notify+0x29b/0x420
> >[ 5123.808390]  [<c040a49c>] ? mwait_idle+0x7c/0x1d0
> >[ 5123.808394]  [<c04022d6>] ? cpu_idle+0xa6/0xe0
> >[ 5123.808399]  [<c0477c43>] ? timer_list_show+0x923/0xec0
> >[ 5123.808405]  [<c08ed515>] ? rest_init+0x5d/0x68
> >[ 5123.808411]  [<c0bc3787>] ? start_kernel+0x352/0x358
> >[ 5123.808415]  [<c0bc31c6>] ? loglevel+0x2b/0x2b
> >[ 5123.808419]  [<c0bc30a9>] ? i386_start_kernel+0xa9/0xaf
> >[ 5123.808422] handlers:
> >[ 5123.808442] [<c0741210>] ata_bmdma_interrupt
> >[ 5123.808477] [<c0760320>] usb_hcd_irq
> >[ 5123.808591] [<f9e156f0>] interrupt_handler
> >[ 5123.808623] Disabling IRQ #19
> >[ 5214.377297] ------------[ cut here ]------------
> >[ 5214.377311] WARNING: at kernel/softirq.c:159 local_bh_enable_ip+0x60/0x90()
> >[ 5214.377314] Hardware name:
> >[ 5214.377316] Modules linked in: 8021q garp Intel537 bridge stp llc it87 hwmon_vid nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack joydev ppdev parport_pc parport snd_hda_codec_realtek netjet isdnhdlc snd_hda_intel snd_hda_codec snd_hwdep crc_ccitt mISDNipac mISDN_core snd_seq snd_seq_device r8169 mii snd_pcm iTCO_wdt iTCO_vendor_support i2c_i801 serio_raw microcode snd_timer snd soundcore snd_page_alloc uinput usb_storage firewire_ohci firewire_core crc_itu_t i915 drm_kms_helper drm i2c_algo_bit i2c_core video [last unloaded: scsi_wait_scan]
> >[ 5214.377379] Pid: 2367, comm: efax Not tainted 3.1.6-1.fc16.i686 #1
> >[ 5214.377382] Call Trace:
> >[ 5214.377389]  [<c090411b>] ? printk+0x2d/0x2f
> >[ 5214.377396]  [<c044c122>] warn_slowpath_common+0x72/0xa0
> >[ 5214.377401]  [<c0452950>] ? local_bh_enable_ip+0x60/0x90
> >[ 5214.377406]  [<c0452950>] ? local_bh_enable_ip+0x60/0x90
> >[ 5214.377411]  [<c044c172>] warn_slowpath_null+0x22/0x30
> >[ 5214.377416]  [<c0452950>] local_bh_enable_ip+0x60/0x90
> >[ 5214.377421]  [<c090d182>] _raw_spin_unlock_bh+0x12/0x20
> >[ 5214.377529]  [<f9e17942>] linux_MT_ReleaseLock_timer_task+0x12/0x20 [Intel537]
> >[ 5214.377622]  [<f9e16c73>] RTS_Disable+0x33/0x40 [Intel537]
> >[ 5214.377714]  [<f9e16565>] clm_terminate+0x15/0x70 [Intel537]
> >[ 5214.377720]  [<c06cafb9>] ? tty_ldisc_flush+0x39/0x50
> >[ 5214.377811]  [<f9e1540d>] close+0xd/0x30 [Intel537]
> >[ 5214.377905]  [<f9e188f7>] softserial_close+0x77/0xb0 [Intel537]
> >[ 5214.377910]  [<c06c4f8f>] tty_release+0x10f/0x4e0
> >[ 5214.377916]  [<c0500fe4>] ? remove_vma+0x44/0x60
> >[ 5214.377920]  [<c0500fe4>] ? remove_vma+0x44/0x60
> >[ 5214.377925]  [<c050385f>] ? exit_mmap+0xcf/0x120
> >[ 5214.377930]  [<c05293ea>] fput+0xba/0x220
> >[ 5214.377936]  [<c0525eb4>] filp_close+0x54/0x80
> >[ 5214.377941]  [<c044f72b>] put_files_struct+0x6b/0xb0
> >[ 5214.377946]  [<c044f7ff>] exit_files+0x3f/0x50
> >[ 5214.377950]  [<c044fc85>] do_exit+0x195/0x7c0
> >[ 5214.377955]  [<c049f5a1>] ? audit_syscall_entry+0x1e1/0x2c0
> >[ 5214.377960]  [<c0450547>] do_group_exit+0x37/0xa0
> >[ 5214.377965]  [<c04505c8>] sys_exit_group+0x18/0x20
> >[ 5214.377969]  [<c090d4f4>] syscall_call+0x7/0xb
> >[ 5214.377973] ---[ end trace 3f5e2974f9d89aa2 ]---
> >
> >
> >
> >
> >
> >
> >so I do see [ 5214.377529]  [<f9e17942>] linux_MT_ReleaseLock_timer_task+0x12/0x20 [Intel537]
> >
> >
> >
> >
> >Regards,
> >Patrick
> >
> >
> >
> >
> >
> >
> >On Thu, Jan 05, 2012 at 09:02:36PM +0100, Philippe Vouters wrote:
> >>Patrick,
> >>
> >>Thank you so much for this detailled call stack. If you read http://www.linuxgrill.com/anonymous/fire/netfilter/kernel-hacking-HOWTO-5.html,
> >>the spinlock chapter, one driver's spinlock being involved in your
> >>case, would it happen you run an SMP Fedora 16 distribution (as per
> >>indicated by uname -a) on a single CPU configuration ?
> >>
> >> From your previous $ cat /proc/interrupts, IRQ 20 looks to be free
> >>and there should not be any longer an IRQ conflict.
> >>
> >>Please provide me with the output of a command like $ sensors. Here
> >>is what it tells for me:
> >>
> >>$ sensors
> >>coretemp-isa-0000
> >>Adapter: ISA adapter
> >>Core 0:       +56.0 C  (high = +86.0 C, crit = +100.0 C)
> >>Core 1:       +56.0 C  (high = +86.0 C, crit = +100.0 C)
> >>
> >>So I am sure my processor is a dual core. I need to know with a
> >>simple command output fact whether your processor is single or
> >>multicore. Well note I am just in the preliminary phase of my
> >>investigations.
> >>
> >>I fear we may also need efax to satisfy you. Can you download
> >>http://vouters.dyndns.org/Intel/efax.zip ?
> >>
> >>$ unzip -aa efax.zip
> >>$ cd efax
> >>$ make -f Makefile_orig
> >>$ ./efax -vewinchmart
> >>
> >>After efax run, do you still have in your Call Trace:
> >>[<f9e07942>] linux_MT_ReleaseLock_timer_task+0x12/0x20 [Intel537]
> >>???
> >>
> >>For the moment I prefer you run efax on your computer as I shall be
> >>able to perform the very same test on my Dual Core processor.  If we
> >>can compare comparible things, it much ease troubleshooting.
> >>
> >>Philippe
> >>
> >>Le 05/01/2012 20:01, Patrick Boyadjian a écrit :
> >>>Well I tried make uninstall and install again and it still fails...here is my dmesg output
> >>>
> >>>[  694.046650] sound enabled
> >>>[  694.046664] Intel 537 card found
> >>>[  727.461869] pci 0000:01:00.0: PCI INT A ->   GSI 20 (level, low) ->   IRQ 20
> >>>[  727.483870] 537: Loaded
> >>>[  744.163496] ------------[ cut here ]------------
> >>>[  744.163511] WARNING: at kernel/softirq.c:159 local_bh_enable_ip+0x60/0x90()
> >>>[  744.163514] Hardware name:
> >>>[  744.163517] Modules linked in: Intel537 fuse 8021q garp bridge stp llc it87 hwmon_vid nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack joydev ppdev microcode snd_hda_codec_realtek netjet isdnhdlc crc_ccitt mISDNipac snd_hda_intel snd_hda_codec r8169 snd_hwdep mISDN_core mii snd_seq snd_seq_device serio_raw iTCO_wdt iTCO_vendor_support i2c_i801 snd_pcm parport_pc parport snd_timer snd soundcore snd_page_alloc uinput usb_storage firewire_ohci firewire_core crc_itu_t i915 drm_kms_helper drm i2c_algo_bit i2c_core video [last unloaded: scsi_wait_scan]
> >>>[  744.163582] Pid: 2168, comm: wvdial Not tainted 3.1.6-1.fc16.i686 #1
> >>>[  744.163585] Call Trace:
> >>>[  744.163592]  [<c090411b>] ? printk+0x2d/0x2f
> >>>[  744.163599]  [<c044c122>] warn_slowpath_common+0x72/0xa0
> >>>[  744.163604]  [<c0452950>] ? local_bh_enable_ip+0x60/0x90
> >>>[  744.163608]  [<c0452950>] ? local_bh_enable_ip+0x60/0x90
> >>>[  744.163613]  [<c044c172>] warn_slowpath_null+0x22/0x30
> >>>[  744.163618]  [<c0452950>] local_bh_enable_ip+0x60/0x90
> >>>[  744.163623]  [<c090d182>] _raw_spin_unlock_bh+0x12/0x20
> >>>[  744.163740]  [<f9e07942>] linux_MT_ReleaseLock_timer_task+0x12/0x20 [Intel537]
> >>>[  744.163831]  [<f9e06c73>] RTS_Disable+0x33/0x40 [Intel537]
> >>>[  744.163921]  [<f9e06565>] clm_terminate+0x15/0x70 [Intel537]
> >>>[  744.163928]  [<c06cafb9>] ? tty_ldisc_flush+0x39/0x50
> >>>[  744.164030]  [<f9e0540d>] close+0xd/0x30 [Intel537]
> >>>[  744.164125]  [<f9e088f7>] softserial_close+0x77/0xb0 [Intel537]
> >>>[  744.164131]  [<c06c4f8f>] tty_release+0x10f/0x4e0
> >>>[  744.164137]  [<c0434285>] ? __wake_up+0x45/0x60
> >>>[  744.164141]  [<c06c5ab0>] ? no_tty+0x30/0x30
> >>>[  744.164146]  [<c0537396>] ? do_vfs_ioctl+0x86/0x5a0
> >>>[  744.164151]  [<c0473f51>] ? ktime_get_ts+0xe1/0x110
> >>>[  744.164156]  [<c05293ea>] fput+0xba/0x220
> >>>[  744.164162]  [<c0525eb4>] filp_close+0x54/0x80
> >>>[  744.164167]  [<c0525f3c>] sys_close+0x5c/0xa0
> >>>[  744.164171]  [<c090d4f4>] syscall_call+0x7/0xb
> >>>[  744.164174] ---[ end trace c8b0b4915f88a90c ]---
> >>>[pboyadjian@pb3000 ~]$
> >>>
> >>>
> >>>I don't have efax installed.
> >>>
> >>>The recurring error message seems always to be "no info from serial port"
> >>>
> >>>Patrick
> >>>
> >>>On Thu, Jan 05, 2012 at 09:35:09AM +0100, Philippe Vouters wrote:
> >>>>Patrick,
> >>>>
> >>>>With your modem board at IRQ 20 and the modem driver can gives us
> >>>>the output of each of the commands below:
> >>>>1/ cd intel536-537/
> >>>>2/ sudo make uninstall
> >>>>3/ dmesg | tail
> >>>>4/ sudo make install
> >>>>5/ dmesg | tail
> >>>>6/ sudo cat /proc/interrupt
> >>>>7/ efax -vewinchmart
> >>>>8/ dmesg | tail
> >>>>
> >>>>The more facts you can provide us is the best.
> >>>>Philippe
> >>>>
> >>>>Le 05/01/2012 04:55, Patrick Boyadjian a écrit :
> >>>>>One more piece of info:
> >>>>>
> >>>>>My dmesg on boot says:
> >>>>>
> >>>>>92.709152]  [<f9df78f7>] softserial_close+0x77/0xb0 [Intel537]
> >>>>>
> >>>>>So I can't really do a setserial for irq 20 and that i/o port.
> >>>>>
> >>>>>
> >>>>>Patrick
> >>>>>
> >>>>>On Wed, Jan 04, 2012 at 08:22:38PM +0100, Philippe Vouters wrote:
> >>>>>>Hi Patrick,
> >>>>>>
> >>>>>>Thank so much for your long reply.
> >>>>>>
> >>>>>>First of all about my write up. I do first suggest to use efax to
> >>>>>>troubleshoot for the driver's installation correctness. It does help
> >>>>>>much highlighting most of the problems before wvdial or kppp times
> >>>>>>attemtps to connect to Internet. And the very advantage of the efax
> >>>>>>command I provide is that it is at no financial cost but an analog
> >>>>>>phone line subscription. The efax command just engage your phone
> >>>>>>line without making a real call. So, except the analog phone
> >>>>>>subscription line, the efax test is at strictly NO additional cost
> >>>>>>for the end-user and provides lots of very informative data,
> >>>>>>enabling to best troubleshoot in case of problems.
> >>>>>>
> >>>>>>As for /dev/ttyS*, I never felt the necessity, the modem code
> >>>>>>creating a soft link between /dev/modem and the /dev/[537 | 536ep]
> >>>>>>real device. /dev/modem is sufficient for both wvdial and kppp. With
> >>>>>>an example on how to set up /etc/wvdial.conf on my Web site, you are
> >>>>>>the first one to mention wvdialconf among all the driver end-users
> >>>>>>since I inhierd this code back in Fedora Core 4. In fact, with all
> >>>>>>my experience with the end-users of my work, it appears that the
> >>>>>>most delicate thing is to correctly specify the suitable AT modem
> >>>>>>commands.
> >>>>>>
> >>>>>>Regarding the other technical items of your skills, could I suggest
> >>>>>>you if possible for you to open up a public Web site on your
> >>>>>>computer or ask for Web space to your Internet provider in order to
> >>>>>>share with others all your acquired knowledge. You would be
> >>>>>>surprised like I am always delighted to notice it with my Web site
> >>>>>>that the specific work you do for someone in peticular may also
> >>>>>>interest a vast population over the planet. This is also true with
> >>>>>>any knowledge whichever its nature and topic. Your efforts would
> >>>>>>then be very rewarded the very same as mines.
> >>>>>>
> >>>>>>Back to your IRQ problem ! Did my suggestions regarding either a
> >>>>>>possible jumper enabling IRQ selection on your modem board or
> >>>>>>pluging in the modem into another PCI slot help you ?
> >>>>>>
> >>>>>>Yours truly,
> >>>>>>
> >>>>>>
> >>>>>>Le 04/01/2012 19:25, Patrick Boyadjian a écrit :
> >>>>>>>Hi Philippe,
> >>>>>>>
> >>>>>>>First off, well done on this write up.  An area that you may like to improve on, as you have suggested to use wvdial as a test app after installation, would be the importance of wvdial needing to see the modem device on a /dev/ttyS* link for use by the wvdialconf tool.  As it stands, you have recommended to symbolically link /dev/modem to /dev/537ep which is good, however, for the sake of less tech savvy users that would simply like to run wvdialconf a symbolic link to /dev/ttyS15 (15 being the experimental one) would allow wvdialconf to run successfully - advantages would be init string validation and correctness as well as the creation of /etc/wvdial.conf for post editing of the ISP username and password of course.
> >>>>>>>
> >>>>>>>As far as other technical subjects, you may guffaw at what I have been able to accomplish with my experience with Linux back when I first explored it back in late 1990's.  That being said here are my main uses:
> >>>>>>>
> >>>>>>>- openvpn with bridging to allow me to vpn in to my linux machine and obtain an IP on my subnet to see other devices on my network
> >>>>>>>- squid to filter traffic from my kids PC on a whitelist to the internet
> >>>>>>>- httpd to host my archive of pics, tunes and movies for access by anyone in my subnet
> >>>>>>>- chntpw app to constantly help my friends who have forgotten their windows NT admin account passwords
> >>>>>>>- simple ffmpeg conversions such as:
> >>>>>>>	ffmpeg -i input.wav output.mp3
> >>>>>>>	ffmpeg -i input.avi -b 64k -s 320x240 -r 24 output.mp4
> >>>>>>>- sendmail.mc and access config for the mail command for my scripts below
> >>>>>>>- mbr backup and restore scripts (dd if=blah blah)
> >>>>>>>- samba for giving my archives access to any UNC connection on my subnet
> >>>>>>>- tcpdump commands to sniff my network
> >>>>>>>- I have a network attached IP camera that ftps motion detected images to my linux machine on vsftpd
> >>>>>>>- iptables of course to firewall the entire operation
> >>>>>>>
> >>>>>>>scripts I use:
> >>>>>>>
> >>>>>>>- a tclsh script that logs all incoming calls to a text file (i.e. date, number, name)
> >>>>>>>- current ip script that checks my external ip every 30 mins and if it changes to email me the new one
> >>>>>>>- script to email me the previous days proxy violations from squid
> >>>>>>>- script to email me the previous days tty login attempts
> >>>>>>>- script to email me the previous days call log
> >>>>>>>- lmsensors script to read the internal temperature of my PC including fan speeds and basement temperature via snmpget...typical output is:
> >>>>>>>
> >>>>>>>[pboyadjian@pb3000 scripts]$ temp
> >>>>>>>
> >>>>>>>Basement Temperature = 17 C
> >>>>>>>
> >>>>>>>PC Internal Temperature = 34 C
> >>>>>>>PC Chip Fan =  672 RPM
> >>>>>>>PC Case Fan = 1132 RPM
> >>>>>>>
> >>>>>>>[pboyadjian@pb3000 scripts]$
> >>>>>>>
> >>>>>>>
> >>>>>>>
> >>>>>>>If you would like my technical documentation on any of the above I would be more than happy to offer it.
> >>>>>>>
> >>>>>>>
> >>>>>>>Regards,
> >>>>>>>Patrick
> >>>>>>>
> >>>>>>>
> >>>>>>>On Wed, Jan 04, 2012 at 03:23:19PM +0100, Philippe Vouters wrote:
> >>>>>>>>Patrick,
> >>>>>>>>
> >>>>>>>>>>If there is anything I can ever do to repay you please let me know!
> >>>>>>>>
> >>>>>>>>Yes, indeed, you can repay us by attentively redeading my
> >>>>>>>>litterature on the Intel modems subject at
> >>>>>>>>http://vouters.dyndns.org/Intel/Intel-Readme.html and give us your
> >>>>>>>>feedback upon it.
> >>>>>>>>
> >>>>>>>>What we do expect are your detailled impressions about this document
> >>>>>>>>clarity and informations completeness.
> >>>>>>>>
> >>>>>>>>Post-scriptum : if you are looking for informations on either Linux,
> >>>>>>>>Unix, OpenVMS or Windows, you may refer to another side of my Web
> >>>>>>>>site at http://vouters.dyndns.org/tima/
> >>>>>>>>If, even better, you mail me with technical subjects I can study and
> >>>>>>>>document, you'll make the worldwide IT community happy.
> >>>>>>>>
> >>>>>>>>Yours truly,
> >>>>>>>>Philippe
> >>>>>>>>
> >>>>>>>>Le 04/01/2012 14:46, Patrick Boyadjian a écrit :
> >>>>>>>>>Brilliant, it works!
> >>>>>>>>>
> >>>>>>>>>Philippe and Antonio, thank you so much for your support in this regard!
> >>>>>>>>>
> >>>>>>>>>If there is anything I can ever do to repay you please let me know!
> >>>>>>>>>
> >>>>>>>>>Regards,
> >>>>>>>>>Patrick
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>>On Wed, Jan 04, 2012 at 12:27:39PM +0100, Philippe Vouters wrote:
> >>>>>>>>>>My work ought to support your modem.
> >>>>>>>>>>[philippe@victor ~]$ grep e159:0001 intel-536-537/*
> >>>>>>>>>>intel-536-537/makefile_537:     vendor_device_ids[0]="e159:0001";\
> >>>>>>>>>>
> >>>>>>>>>>The alternative to modifying the bash files is to download
> >>>>>>>>>>http://vouters.dyndns.org/Intel/intel-536EP-537EP_2012_01_04.tar.bz2
> >>>>>>>>>>
> >>>>>>>>>>Please reply whether you are fully satisfied or not.
> >>>>>>>>>>
> >>>>>>>>>>Regards,
> >>>>>>>>>>Philippe
> >>>>>>>>>>
> >>>>>>>>>>Le 04/01/2012 04:03, Patrick Boyadjian a écrit :
> >>>>>>>>>>>Thanks for the swift reply Antonio.
> >>>>>>>>>>>
> >>>>>>>>>>>Well originally I had a conexant chipset for a HCF modem that the linuxant group had drivers for, however those drivers ONLY worked on pre 3.x kernels so they broke when I upgraded.  Dev team from Linuxant has informed me they are aware of the API break in the driver for the newer kernel and say they should fix it sometime soon.  Meanwhile I dug up the Intel modem you see below to try and get it to work.
> >>>>>>>>>>>
> >>>>>>>>>>>So short answer I never should have upgraded!! :)
> >>>>>>>>>>>
> >>>>>>>>>>>Regards,
> >>>>>>>>>>>Patrick
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>>On Tue, Jan 03, 2012 at 07:47:12PM -0600, Antonio Olivares wrote:
> >>>>>>>>>>>>Patrick,
> >>>>>>>>>>>>
> >>>>>>>>>>>>I am unsure if that modem in particular is served by Phillipe's
> >>>>>>>>>>>>driver.  IT does not seem to be a true INTEL 537 modem :(
> >>>>>>>>>>>>However, there was a recent update to the driver since it was failing
> >>>>>>>>>>>>to build up in Ubuntu and it was working fine in Fedora 15.  Did you
> >>>>>>>>>>>>make sure that you got the latest driver available from Phillipe's
> >>>>>>>>>>>>website?
> >>>>>>>>>>>>
> >>>>>>>>>>>>Oops sorry, you did get the latest one. Maybe Phillipe can comment
> >>>>>>>>>>>>here to make sure that maybe something went wrong, or that it may be
> >>>>>>>>>>>>specific to 537 modem, since the driver also works with 536 Intel
> >>>>>>>>>>>>based modems.
> >>>>>>>>>>>>
> >>>>>>>>>>>>Regards,
> >>>>>>>>>>>>
> >>>>>>>>>>>>
> >>>>>>>>>>>>Antonio
> >>>>>>>>>>>>
> >>>>>>>>>>>>BTW,
> >>>>>>>>>>>>since you have experience with linux since the Red Hat days, did you
> >>>>>>>>>>>>get to use this particular modem before?  If you did and the drivers
> >>>>>>>>>>>>worked, I see no reason why the modem should not work with the newer
> >>>>>>>>>>>>kernels.
> >>>>>>>>>>>>
> >>>>>>>>>>>>
> >>>>>>>>>>>>On Tue, Jan 3, 2012 at 7:24 PM, Patrick Boyadjian
> >>>>>>>>>>>><patrick@xxxxxxxxxxxxxxxxxxxxxxx>       wrote:
> >>>>>>>>>>>>>Hi,
> >>>>>>>>>>>>>
> >>>>>>>>>>>>>This is my first attempt to contact this group so apologize in advance if I=  don't provide sufficient information.
> >>>>>>>>>>>>>
> >>>>>>>>>>>>>I'm not exactly a newbie to linux and Fedora since I've used it back when i= t was called red hat...I've upgraded to Fedora 16 recently and boy how thin= gs have changed!  Anyways, here is where I'm at:
> >>>>>>>>>>>>>
> >>>>>>>>>>>>>lspci shows my modem as:
> >>>>>>>>>>>>>01:01.0 Communication controller: Tiger Jet Network Inc. Tiger3XX Modem/ISD= N interface
> >>>>>>>>>>>>>
> >>>>>>>>>>>>>scanModem details as:
> >>>>>>>>>>>>>For candidate card in slot 01:01.0, firmware information and bootup diagnos= tics are:
> >>>>>>>>>>>>>PCI slot       PCI ID          SubsystemID     Name
> >>>>>>>>>>>>>----------     ---------       ---------       --------------
> >>>>>>>>>>>>>01:01.0        e159:0001       8086:0003       Communication controller: Ti=
> >>>>>>>>>>>>>ger Jet Network Inc. Tiger3XX Modem/ISDN interface
> >>>>>>>>>>>>>
> >>>>>>>>>>>>>Modem interrupt assignment and sharing:
> >>>>>>>>>>>>>--- Bootup diagnostics for card in PCI slot 01:01.0 ----
> >>>>>>>>>>>>>[    0.109098] pci 0000:01:01.0: [e159:0001] type 0 class 0x000780
> >>>>>>>>>>>>>[    0.109120] pci 0000:01:01.0: reg 10: [io  0xa000-0xa0ff]
> >>>>>>>>>>>>>[    0.109133] pci 0000:01:01.0: reg 14: [mem 0xf1004000-0xf1004fff]
> >>>>>>>>>>>>>[    0.109200] pci 0000:01:01.0: supports D2
> >>>>>>>>>>>>>[    0.109203] pci 0000:01:01.0: PME# supported from D0 D2 D3hot D3cold
> >>>>>>>>>>>>>[    0.109209] pci 0000:01:01.0: PME# disabled
> >>>>>>>>>>>>>
> >>>>>>>>>>>>>The PCI slot 01:01.0 of the modem card may be disabled early in a bootup process,  but then enabled later. If modem drivers load but the  modem is not responsive, read DOCs/Bootup.txt about possible fixes= .
> >>>>>>>>>>>>>Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx if help is needed.
> >>>>>>>>>>>>>
> >>>>>>>>>>>>>
> >>>>>>>>>>>>>
> >>>>>>>>>>>>>Predictive  diagnostics for card in bus 01:01.0:
> >>>>>>>>>>>>>        Modem chipset  detected on
> >>>>>>>>>>>>>NAME=3D"Communication controller: Tiger Jet Network Inc. Tiger3XX Modem/ISD= N interface"
> >>>>>>>>>>>>>CLASS=3D0780
> >>>>>>>>>>>>>PCIDEV=3De159:0001
> >>>>>>>>>>>>>SUBSYS=3D8086:0003
> >>>>>>>>>>>>>IRQ=3D11
> >>>>>>>>>>>>>HDA2=3D00:1b.0
> >>>>>>>>>>>>>IDENT=3DINTEL537
> >>>>>>>>>>>>>
> >>>>>>>>>>>>>For candidate modem in:  01:01.0
> >>>>>>>>>>>>>   0780 Communication controller: Tiger Jet Network Inc. Tiger3XX Modem/ISD= N interface
> >>>>>>>>>>>>>      Primary device ID:  e159:0001
> >>>>>>>>>>>>>Support type needed or chipset:        INTEL537
> >>>>>>>>>>>>>
> >>>>>>>>>>>>>
> >>>>>>>>>>>>>So I visited http://vouters.dyndns.org/Intel/ and heeded Philippe's note to=
> >>>>>>>>>>>>>:
> >>>>>>>>>>>>>
> >>>>>>>>>>>>>
> >>>>>>>>>>>>>If you execute a 3.x.y kernel, download:
> >>>>>>>>>>>>>
> >>>>>>>>>>>>>../Intel/intel-536EP-537EP_2011_12_11.tar.bz2<http://vouters.dyndns.org/Int=
> >>>>>>>>>>>>>el/intel-536EP-537EP_2011_12_11.tar.bz2>
> >>>>>>>>>>>>>
> >>>>>>>>>>>>>
> >>>>>>>>>>>>>
> >>>>>>>>>>>>>...and continued to untar and try to build.
> >>>>>>>>>>>>>
> >>>>>>>>>>>>>Issuing make clean and make 537 seem to work with a warning:
> >>>>>>>>>>>>>
> >>>>>>>>>>>>>[root@pb3000 intel-536-537]# make clean
> >>>>>>>>>>>>>cd coredrv; make clean
> >>>>>>>>>>>>>make[1]: Entering directory `/root/intel-536-537/coredrv'
> >>>>>>>>>>>>>rm -f *.ko .*.o.cmd *.mod.c .*.ko.cmd *.o *~ core Module.* modules.* rm -rf .tmp_versions
> >>>>>>>>>>>>>make[1]: Leaving directory `/root/intel-536-537/coredrv'
> >>>>>>>>>>>>>rm -f *.o *.ko
> >>>>>>>>>>>>>[root@pb3000 intel-536-537]# make 537
> >>>>>>>>>>>>>cd coredrv; make clean
> >>>>>>>>>>>>>make[1]: Entering directory `/root/intel-536-537/coredrv'
> >>>>>>>>>>>>>rm -f *.ko .*.o.cmd *.mod.c .*.ko.cmd *.o *~ core Module.* modules.* rm -rf .tmp_versions
> >>>>>>>>>>>>>make[1]: Leaving directory `/root/intel-536-537/coredrv'
> >>>>>>>>>>>>>rm -f *.o *.ko
> >>>>>>>>>>>>>   Module precompile check
> >>>>>>>>>>>>>   Current running kernel is: 3.1.6-1.fc16.i686
> >>>>>>>>>>>>>   /lib/modules...   autoconf.h exists
> >>>>>>>>>>>>>diff: /boot/vmlinuz.autoconf.h: No such file or directory
> >>>>>>>>>>>>>   autoconf.h matches running kernel
> >>>>>>>>>>>>>diff: /boot/vmlinuz.version.h: No such file or directory
> >>>>>>>>>>>>>   version.h matches running kernel
> >>>>>>>>>>>>>make[1]: Entering directory `/root/intel-536-537'
> >>>>>>>>>>>>>Building for 537
> >>>>>>>>>>>>>3.1.6-1.fc16.i686
> >>>>>>>>>>>>>make[2]: Entering directory `/root/intel-536-537/coredrv'
> >>>>>>>>>>>>>make -C /lib/modules/3.1.6-1.fc16.i686/build M=3D/root/intel-536-537/coredr= v modules
> >>>>>>>>>>>>>make[3]: Entering directory `/usr/src/kernels/3.1.6-1.fc16.i686'
> >>>>>>>>>>>>>  CC [M]  /root/intel-536-537/coredrv/coredrv.o
> >>>>>>>>>>>>>  CC [M]  /root/intel-536-537/coredrv/clmmain.o
> >>>>>>>>>>>>>  CC [M]  /root/intel-536-537/coredrv/rts.o
> >>>>>>>>>>>>>  CC [M]  /root/intel-536-537/coredrv/task.o
> >>>>>>>>>>>>>  CC [M]  /root/intel-536-537/coredrv/uart.o
> >>>>>>>>>>>>>  CC [M]  /root/intel-536-537/coredrv/wwh_dflt.o
> >>>>>>>>>>>>>  CC [M]  /root/intel-536-537/coredrv/locks.o
> >>>>>>>>>>>>>  CC [M]  /root/intel-536-537/coredrv/softserial_io.o
> >>>>>>>>>>>>>  CC [M]  /root/intel-536-537/coredrv/softserial_ioctl.o
> >>>>>>>>>>>>>  CC [M]  /root/intel-536-537/coredrv/softserial.o
> >>>>>>>>>>>>>  CC [M]  /root/intel-536-537/coredrv/afedsp_int.o
> >>>>>>>>>>>>>  LD [M]  /root/intel-536-537/coredrv/Intel537.o
> >>>>>>>>>>>>>  Building modules, stage 2.
> >>>>>>>>>>>>>  MODPOST 1 modules
> >>>>>>>>>>>>>WARNING: could not find /root/intel-536-537/coredrv/.537core.lib.cmd for /r= oot/intel-536-537/coredrv/537core.lib
> >>>>>>>>>>>>>  CC      /root/intel-536-537/coredrv/Intel537.mod.o
> >>>>>>>>>>>>>  LD [M]  /root/intel-536-537/coredrv/Intel537.ko
> >>>>>>>>>>>>>make[3]: Leaving directory `/usr/src/kernels/3.1.6-1.fc16.i686'
> >>>>>>>>>>>>>make[2]: Leaving directory `/root/intel-536-537/coredrv'
> >>>>>>>>>>>>>make[1]: Leaving directory `/root/intel-536-537'
> >>>>>>>>>>>>>[root@pb3000 intel-536-537]#
> >>>>>>>>>>>>>
> >>>>>>>>>>>>>
> >>>>>>>>>>>>>However, make install fails complaining about kernel version:
> >>>>>>>>>>>>>
> >>>>>>>>>>>>>[root@pb3000 intel-536-537]# make install
> >>>>>>>>>>>>>make[1]: Entering directory `/root/intel-536-537'
> >>>>>>>>>>>>>rm -f /usr/sbin/hamregistry.bin
> >>>>>>>>>>>>>bash 537_inst
> >>>>>>>>>>>>>running kernel 3.1.6-1.fc16.i686
> >>>>>>>>>>>>>unsupported kernel version: only 2.4.x and 2.6.x are supported
> >>>>>>>>>>>>>make[1]: *** [install] Error 1
> >>>>>>>>>>>>>make[1]: Leaving directory `/root/intel-536-537'
> >>>>>>>>>>>>>[root@pb3000 intel-536-537]#
> >>>>>>>>>>>>>
> >>>>>>>>>>>>>
> >>>>>>>>>>>>>Am I missing something?  Any help here is super appreciated.
> >>>>>>>>>>>>>
> >>>>>>>>>>>>>Patrick
> >>>>>>>>>>>>>
> >>>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>--
> >>>>>>>>>>Philippe Vouters (Fontainebleau/France)
> >>>>>>>>>>URL: http://vouters.dyndns.org/
> >>>>>>>>>
> >>>>>>>>
> >>>>>>>>--
> >>>>>>>>Philippe Vouters (Fontainebleau/France)
> >>>>>>>>URL: http://vouters.dyndns.org/
> >>>>>>>
> >>>>>>
> >>>>>>--
> >>>>>>Philippe Vouters (Fontainebleau/France)
> >>>>>>URL: http://vouters.dyndns.org/
> >>>>>
> >>>>
> >>>>--
> >>>>Philippe Vouters (Fontainebleau/France)
> >>>>URL: http://vouters.dyndns.org/
> >>>
> >>
> >>--
> >>Philippe Vouters (Fontainebleau/France)
> >>URL: http://vouters.dyndns.org/
> >
> 
> -- 
> Philippe Vouters (Fontainebleau/France)
> URL: http://vouters.dyndns.org/


[Index of Archives]     [Linux Media Development]     [Asterisk]     [DCCP]     [Netdev]     [X.org]     [Xfree86]     [Fedora Women]     [Linux USB]

  Powered by Linux