intel 537 with kernel 3.1.x

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

This is my first attempt to contact this group so apologize in advance if I=  don't provide sufficient information.

I'm not exactly a newbie to linux and Fedora since I've used it back when i= t was called red hat...I've upgraded to Fedora 16 recently and boy how thin= gs have changed!  Anyways, here is where I'm at:

lspci shows my modem as:
01:01.0 Communication controller: Tiger Jet Network Inc. Tiger3XX Modem/ISD= N interface

scanModem details as:
For candidate card in slot 01:01.0, firmware information and bootup diagnos= tics are:
PCI slot       PCI ID          SubsystemID     Name
----------     ---------       ---------       --------------
01:01.0        e159:0001       8086:0003       Communication controller: Ti=
ger Jet Network Inc. Tiger3XX Modem/ISDN interface

Modem interrupt assignment and sharing:
--- Bootup diagnostics for card in PCI slot 01:01.0 ----
[    0.109098] pci 0000:01:01.0: [e159:0001] type 0 class 0x000780
[    0.109120] pci 0000:01:01.0: reg 10: [io  0xa000-0xa0ff]
[    0.109133] pci 0000:01:01.0: reg 14: [mem 0xf1004000-0xf1004fff]
[    0.109200] pci 0000:01:01.0: supports D2
[    0.109203] pci 0000:01:01.0: PME# supported from D0 D2 D3hot D3cold
[    0.109209] pci 0000:01:01.0: PME# disabled

The PCI slot 01:01.0 of the modem card may be disabled early in a bootup process,  but then enabled later. If modem drivers load but the  modem is not responsive, read DOCs/Bootup.txt about possible fixes= .
Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx if help is needed.



Predictive  diagnostics for card in bus 01:01.0:
        Modem chipset  detected on
NAME=3D"Communication controller: Tiger Jet Network Inc. Tiger3XX Modem/ISD= N interface"
CLASS=3D0780
PCIDEV=3De159:0001
SUBSYS=3D8086:0003
IRQ=3D11
HDA2=3D00:1b.0
IDENT=3DINTEL537

For candidate modem in:  01:01.0
   0780 Communication controller: Tiger Jet Network Inc. Tiger3XX Modem/ISD= N interface
      Primary device ID:  e159:0001
Support type needed or chipset:        INTEL537


So I visited http://vouters.dyndns.org/Intel/ and heeded Philippe's note to=
:


If you execute a 3.x.y kernel, download:

../Intel/intel-536EP-537EP_2011_12_11.tar.bz2<http://vouters.dyndns.org/Int=
el/intel-536EP-537EP_2011_12_11.tar.bz2>



...and continued to untar and try to build.

Issuing make clean and make 537 seem to work with a warning:

[root@pb3000 intel-536-537]# make clean
cd coredrv; make clean
make[1]: Entering directory `/root/intel-536-537/coredrv'
rm -f *.ko .*.o.cmd *.mod.c .*.ko.cmd *.o *~ core Module.* modules.* rm -rf .tmp_versions
make[1]: Leaving directory `/root/intel-536-537/coredrv'
rm -f *.o *.ko
[root@pb3000 intel-536-537]# make 537
cd coredrv; make clean
make[1]: Entering directory `/root/intel-536-537/coredrv'
rm -f *.ko .*.o.cmd *.mod.c .*.ko.cmd *.o *~ core Module.* modules.* rm -rf .tmp_versions
make[1]: Leaving directory `/root/intel-536-537/coredrv'
rm -f *.o *.ko
   Module precompile check
   Current running kernel is: 3.1.6-1.fc16.i686
   /lib/modules...   autoconf.h exists
diff: /boot/vmlinuz.autoconf.h: No such file or directory
   autoconf.h matches running kernel
diff: /boot/vmlinuz.version.h: No such file or directory
   version.h matches running kernel
make[1]: Entering directory `/root/intel-536-537'
Building for 537
3.1.6-1.fc16.i686
make[2]: Entering directory `/root/intel-536-537/coredrv'
make -C /lib/modules/3.1.6-1.fc16.i686/build M=3D/root/intel-536-537/coredr= v modules
make[3]: Entering directory `/usr/src/kernels/3.1.6-1.fc16.i686'
  CC [M]  /root/intel-536-537/coredrv/coredrv.o
  CC [M]  /root/intel-536-537/coredrv/clmmain.o
  CC [M]  /root/intel-536-537/coredrv/rts.o
  CC [M]  /root/intel-536-537/coredrv/task.o
  CC [M]  /root/intel-536-537/coredrv/uart.o
  CC [M]  /root/intel-536-537/coredrv/wwh_dflt.o
  CC [M]  /root/intel-536-537/coredrv/locks.o
  CC [M]  /root/intel-536-537/coredrv/softserial_io.o
  CC [M]  /root/intel-536-537/coredrv/softserial_ioctl.o
  CC [M]  /root/intel-536-537/coredrv/softserial.o
  CC [M]  /root/intel-536-537/coredrv/afedsp_int.o
  LD [M]  /root/intel-536-537/coredrv/Intel537.o
  Building modules, stage 2.
  MODPOST 1 modules
WARNING: could not find /root/intel-536-537/coredrv/.537core.lib.cmd for /r= oot/intel-536-537/coredrv/537core.lib
  CC      /root/intel-536-537/coredrv/Intel537.mod.o
  LD [M]  /root/intel-536-537/coredrv/Intel537.ko
make[3]: Leaving directory `/usr/src/kernels/3.1.6-1.fc16.i686'
make[2]: Leaving directory `/root/intel-536-537/coredrv'
make[1]: Leaving directory `/root/intel-536-537'
[root@pb3000 intel-536-537]#


However, make install fails complaining about kernel version:

[root@pb3000 intel-536-537]# make install
make[1]: Entering directory `/root/intel-536-537'
rm -f /usr/sbin/hamregistry.bin
bash 537_inst
running kernel 3.1.6-1.fc16.i686
unsupported kernel version: only 2.4.x and 2.6.x are supported
make[1]: *** [install] Error 1
make[1]: Leaving directory `/root/intel-536-537'
[root@pb3000 intel-536-537]#


Am I missing something?  Any help here is super appreciated.

Patrick



[Index of Archives]     [Linux Media Development]     [Asterisk]     [DCCP]     [Netdev]     [X.org]     [Xfree86]     [Fedora Women]     [Linux USB]

  Powered by Linux