Re: Nabil, Morocco kernel 2.6.38-11-generic

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Nabil,

scanModem reports that it could not detect a pci modem among the
devices.  The modem chipset could be supported through hsfmodem
drivers by Linuxant.


 The HDA diagnostics did not recognize a modem chip on the audio subsystem,
 though a Conexant chip modem might not be recognized.

=== Finished firmware and bootup diagnostics, next deducing cogent software. ===

A candidate modem is not transparent among the PCI devices:
------------------------------------------------
00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series
Chipset Integrated Graphics Controller (rev 07)
00:02.1 Display controller: Intel Corporation Mobile 4 Series Chipset
Integrated Graphics Controller (rev 07)
00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio
Controller (rev 03)
00:1f.2 IDE interface: Intel Corporation ICH9M/M-E 2 port SATA IDE
Controller (rev 03)
00:1f.5 IDE interface: Intel Corporation ICH9M/M-E 2 port SATA IDE
Controller (rev 03)
02:00.0 Network controller: Intel Corporation Centrino Wireless-N 1000
85:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8072
PCI-E Gigabit Ethernet Controller (rev 10)
------------------------------------------------
 with USB, bridge, and RAM devices not displayed.
If a High Definition Audio card is present, if might be hosted on the Subsystem.

If your modem is an
  external USB type,
  connected by an external serial cable,
  or mounted internally on an ISA card,
then scanModem would not access it.



Try with Root permission
 $ sudo wvdialconf  /etc/wvdial.conf
 to detect these modem types and some USB modems.
 If the detection is successful, read the DOCs/wvdial.txt .
 Edit the /etc/wvdial.conf with Root permission:
       sudo  gedit  /etc/wvdial.conf
 will be able to dial out with Root permission:
       sudo wvdial

If you run above tests and get no modem found, then you may proceed to
check out Linuxant page to see if you can find a driver.

Regards,

Antonio

On Tue, Oct 11, 2011 at 10:36 AM, Mohandis MOE <mohandis.moe@xxxxxxxxx> wrote:
> Please find pasted below the ModemData.txt information, Thank you for your help.
>
> --------------------------  System information ----------------------------
> CPU=i686,  Ubuntu ,  ALSA_version=1.0.23
> Linux version 2.6.38-11-generic (buildd@zirconium) (gcc version 4.5.2
> (Ubuntu/Linaro 4.5.2-8ubuntu4) ) #50-Ubuntu SMP Mon Sep 12 21:18:14
> UTC 2011
>  scanModem update of:  2011_08_08
>
> Distrib_ID=Ubuntu
> DistribCodeName=natty
> AptRepositoryStem=http://ma.archive.ubuntu.com/ubuntu/
>
>
> The dkms driver upgrade utilities are installed,
>
>  There are no blacklisted modem drivers in /etc/modprobe*  files
>
>  Potentially useful modem drivers now loaded are:
>  snd_atiixp_modem snd_via82xx_modem snd_intel8x0m   snd_hda_intel
>
> Attached USB devices are:
>  ID 5986:03b0 Acer, Inc
> If a cellphone is not detected, see
> http://ubuntuforums.org/archive/index.php/t-878554.html
> A sample report is:
> http://linmodems.technion.ac.il/bigarch/archive-nineth/msg00578.html
>
> If a USB modem or cellphone is attached and was not detected, please
> provide available information in your request to discuss@xxxxxxxxxxxxx
>
> Candidate PCI devices with modem chips are:
> 00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio
> Controller (rev 03)
> High Definition Audio cards can host modem chips.
>
> For candidate card in slot 00:1b.0, firmware information and bootup
> diagnostics are:
>  PCI slot       PCI ID          SubsystemID     Name
>  ----------     ---------       ---------       --------------
>  00:1b.0        8086:293e       103c:3073       Audio device: Intel Corporation 82801I
>
>  Modem interrupt assignment and sharing:
>  48:        872        798   PCI-MSI-edge      hda_intel
>  --- Bootup diagnostics for card in PCI slot 00:1b.0 ----
> [    0.664190] pci 0000:00:1b.0: [8086:293e] type 0 class 0x000403
> [    0.664213] pci 0000:00:1b.0: reg 10: [mem 0x98900000-0x98903fff 64bit]
> [    0.664300] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
> [    0.664305] pci 0000:00:1b.0: PME# disabled
> [   17.974114] HDA Intel 0000:00:1b.0: power state changed by ACPI to D0
> [   17.974124] HDA Intel 0000:00:1b.0: power state changed by ACPI to D0
> [   17.974135] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 17 (level,
> low) -> IRQ 17
> [   17.974572] HDA Intel 0000:00:1b.0: irq 48 for MSI/MSI-X
> [   17.974611] HDA Intel 0000:00:1b.0: setting latency timer to 64
>
>  The PCI slot 00:1b.0 of the modem card may be disabled early in
>  a bootup process,  but then enabled later. If modem drivers load
>  but the  modem is not responsive, read DOCs/Bootup.txt about possible fixes.
>  Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx
>  if help is needed.
>
>
>
> ===== Advanced Linux Sound Architecture (ALSA) diagnostics =====
> The ALSA packages provide audio support and also drivers for some modems.
> ALSA diagnostics are written during bootup to /proc/asound/ folders.
>
> The modem cards detected by "aplay -l"  are: None
>
>
> The /proc/asound/pcm file reports:
> -----------------------
> 00-00: AD198x Analog : AD198x Analog : playback 1 : capture 2
> 00-03: HDMI 0 : HDMI 0 : playback 1
>
> about /proc/asound/cards:
> ------------------------
>  0 [Intel          ]: HDA-Intel - HDA Intel
>                      HDA Intel at 0x98900000 irq 48
>
>  PCI slot 00:1b.0 has a High Definition Audio Card
>  The drivers are in the kernel modules tree at:
>  /lib/modules/2.6.38-8-generic/kernel/sound/pci/hda/snd-hda-intel.ko
> /lib/modules/2.6.38-11-generic/kernel/sound/pci/hda/snd-hda-intel.ko
>
>  The HDA diagnostics did not recognize a modem chip on the audio subsystem,
>  though a Conexant chip modem might not be recognized.
>
> === Finished firmware and bootup diagnostics, next deducing cogent software. ===
>
> A candidate modem is not transparent among the PCI devices:
> ------------------------------------------------
> 00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series
> Chipset Integrated Graphics Controller (rev 07)
> 00:02.1 Display controller: Intel Corporation Mobile 4 Series Chipset
> Integrated Graphics Controller (rev 07)
> 00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio
> Controller (rev 03)
> 00:1f.2 IDE interface: Intel Corporation ICH9M/M-E 2 port SATA IDE
> Controller (rev 03)
> 00:1f.5 IDE interface: Intel Corporation ICH9M/M-E 2 port SATA IDE
> Controller (rev 03)
> 02:00.0 Network controller: Intel Corporation Centrino Wireless-N 1000
> 85:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8072
> PCI-E Gigabit Ethernet Controller (rev 10)
> ------------------------------------------------
>  with USB, bridge, and RAM devices not displayed.
> If a High Definition Audio card is present, if might be hosted on the Subsystem.
>
> If your modem is an
>   external USB type,
>   connected by an external serial cable,
>   or mounted internally on an ISA card,
> then scanModem would not access it.
>
> Try with Root permission
>  $ sudo wvdialconf  /etc/wvdial.conf
>  to detect these modem types and some USB modems.
>  If the detection is successful, read the DOCs/wvdial.txt .
>  Edit the /etc/wvdial.conf with Root permission:
>        sudo  gedit  /etc/wvdial.conf
>  will be able to dial out with Root permission:
>        sudo wvdial
>
>  Many modems for which scanModem fails have Conexant chips.
>  From http://www.linuxant.com/drivers/modemident.php
>  get the ListModem tool, which will report on Conexant chipset modems
>
>  If the above tests fail, please provide any independent information
> available on your modem.
>  If an alternative boot into Microsoft windows can be done, do mouse
> clicks on:
>   Start > Settings > Control Panel > Classical View (for Window XP) > System
>> Hardware > Device Manager > Modems > Click on the + > Modem. Double click to
> expand the graphic. Manufacturer information may be displayed. For example, CXT
> stands for Conexant. Click the Diagnostics Tab. Record any hardware ID or vendor
> and device information. From the Driver Details TAB, copy out the
> VENdor and DEVice information.
> Next do the Query Modem and record the ATI specifications displayed such as:
>    ATI3 - Agere SoftModem Version 2.1.22
>    ATI5 - 2.1.22, AMR Intel MB, AC97 ID:SIL REV:0x27
> Try to identify the modem setup file, with name perhaps MODEM.INF.
> If may contain chipset Vendor informaton.
>
>
> Predictive  diagnostics for card in bus 00:1b.0:
>        Modem chipset not detected on
> NAME="Audio device: Intel Corporation 82801I "
> CLASS=0403
> PCIDEV=8086:293e
> SUBSYS=103c:3073
> IRQ=48
> HDA2=00:1b.0
> SOFT=8086:293e.HDA
>
>  For candidate modem in:  00:1b.0
>   0403 Audio device: Intel Corporation 82801I
>      Primary device ID:  8086:293e
>    Subsystem PCI_id  103c:3073
>    Softmodem codec or chipset from diagnostics:
>                               from    Archives:
>
>
>
> Support type needed or chipset:
>
> Support can likely be achieved through two mutually exclusive alternatives:
> 1) The hsfmodem software for Conexant chipset modems: Read DOCs/Conexant.txt
> The following ALSA alternative CANNOT work with Conexant modems.
>
> 2) An ALSA modem driver plus slmodemd.  Read DOCs/Smartlink.txt for details, and
> to test get the package SLMODEMD_gcc4.5_alsa1.0.23.tar.gz from:
>        http://linmodems.technion.ac.il/packages/smartlink/
>
>
>  The base of the UDEV device file system is: /dev/.udev
>
>  Versions adequately match for the compiler installed: 4.5.2
>             and the compiler used in kernel assembly: 4.5.2
>
>
>
>  Minimal compiling resources appear complete:
>   make utility - /usr/bin/make
>   Compiler version 4.5
>   linuc_headers base folder /lib/modules/2.6.38-11-generic/build
>
>  However some compilations and executable functions may need additional files,
>  in the FileNames.h (so called kernel "h"eaders) collection installed
> in  /usr/include/ .
>  For martian_modem, additional required packages are needed. The also
> required headers of package libc6 are commonly installed by default.
>  Compiling hsfmodem drivers does require linux-libc-dev and libc6-dev
> packages, for kernels 2.6.24 and later versions.
>  In not included on your install CD, search for them at
> http://packages.ubuntu.com
>  or comparable Repository for other Linux distros.
>  When compiling ALSA drivers, the utility "patch" will also be needed.
>
>
>
>
> If a driver compilation fails, with message including some lack of
> some FileName.h (stdio.h for example), then
> Some additional kernel-header files need installation to /usr/include.
> The minimal additional packages are libc6-dev
> and any of its dependents, under Ubuntu linux-libc-dev
>
> If an alternate ethernet connection is available,
> $  apt-get update
> $  apt-get -s install linux-kernel-devel
> will install needed packages.
> For Debian/Ubuntu related distributions, run the following command to
> display the needed package list:
>
> Otherwise packages have to be found through http://packages.ubuntu.com
> Once downloaded and transferred into a Linux partition,
> they can be installed alltogether with:
> $ sudo dpkg -i *.deb
>
> Checking settings of:   /etc/ppp/options
> asyncmap 0
> noauth
> crtscts
> lock
> hide-password
> modem
> lcp-echo-interval 30
> lcp-echo-failure 4
> noipx
>
> In case of a message like:
>   Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
> see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html
>
> For guidance on FAX usage, get from
> http://linmodems.technion.ac.il/packages/  get faxing.tar.gz
> It has samples for a modem using port /dev/ttySL0, which must be
> changed to match your modem's port.
>
> Read Modem/DOCs/YourSystem.txt concerning other COMM channels: eth0
> Which can interfere with Browser naviagation.
>
>  Don't worry about the following, it is for experts should trouble
> shooting be necessary.
> ==========================================================
>
>  Checking for modem support lines:
>  --------------------------------------
>     /device/modem symbolic link:
> slmodemd created symbolic link /dev/ttySL0:
>     Within /etc/udev/ files:
>
>     Within /etc/modprobe.conf files:
> /etc/modprobe.d/alsa-base.conf:options snd-atiixp-modem index=-2
> /etc/modprobe.d/alsa-base.conf:options snd-via82xx-modem index=-2
> /etc/modprobe.d/blacklist-modem.conf:# Uncomment these entries in
> order to blacklist unwanted modem drivers
> /etc/modprobe.d/blacklist-modem.conf:# blacklist snd-atiixp-modem
> /etc/modprobe.d/blacklist-modem.conf:# blacklist snd-via82xx-modem
> /etc/modprobe.d/sl-modem.conf:install slamr /sbin/modprobe -qb
> ungrab-winmodem; /sbin/modprobe --ignore-install slamr; test -e
> /dev/slamr0 && (chmod 660 /dev/slamr0 && chgrp dialout /dev/slamr0) ||
> (/bin/mknod -m 660 /dev/slamr0 c 242 0 2>/dev/null && chgrp dialout
> /dev/slamr0)
> /etc/modprobe.d/sl-modem.conf:install slusb /sbin/modprobe -qb
> ungrab-winmodem; /sbin/modprobe --ignore-install slusb; test -e
> /dev/slusb0 && (chmod 660 /dev/slusb0 && chgrp dialout /dev/slusb0) ||
> (/bin/mknod -m 660 /dev/slusb0 c 243 0 2>/dev/null && chgrp dialout
> /dev/slusb0)
>     Within any ancient /etc/devfs files:
>
>     Within ancient kernel 2.4.n /etc/module.conf files:
>
> --------- end modem support lines --------
>



[Index of Archives]     [Linux Media Development]     [Asterisk]     [DCCP]     [Netdev]     [X.org]     [Xfree86]     [Fedora Women]     [Linux USB]

  Powered by Linux