Nabil, Morocco kernel 2.6.38-11-generic

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Please find pasted below the ModemData.txt information, Thank you for your help.

--------------------------  System information ----------------------------
CPU=i686,  Ubuntu ,  ALSA_version=1.0.23
Linux version 2.6.38-11-generic (buildd@zirconium) (gcc version 4.5.2
(Ubuntu/Linaro 4.5.2-8ubuntu4) ) #50-Ubuntu SMP Mon Sep 12 21:18:14
UTC 2011
 scanModem update of:  2011_08_08


The dkms driver upgrade utilities are installed,

 There are no blacklisted modem drivers in /etc/modprobe*  files

 Potentially useful modem drivers now loaded are:
  snd_atiixp_modem snd_via82xx_modem snd_intel8x0m   snd_hda_intel

Attached USB devices are:
 ID 5986:03b0 Acer, Inc
If a cellphone is not detected, see
A sample report is:

If a USB modem or cellphone is attached and was not detected, please
provide available information in your request to discuss@xxxxxxxxxxxxx

Candidate PCI devices with modem chips are:
00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio
Controller (rev 03)
High Definition Audio cards can host modem chips.

For candidate card in slot 00:1b.0, firmware information and bootup
diagnostics are:
 PCI slot	PCI ID		SubsystemID	Name
 ----------	---------	---------	--------------
 00:1b.0	8086:293e	103c:3073	Audio device: Intel Corporation 82801I

 Modem interrupt assignment and sharing:
 48:        872        798   PCI-MSI-edge      hda_intel
 --- Bootup diagnostics for card in PCI slot 00:1b.0 ----
[    0.664190] pci 0000:00:1b.0: [8086:293e] type 0 class 0x000403
[    0.664213] pci 0000:00:1b.0: reg 10: [mem 0x98900000-0x98903fff 64bit]
[    0.664300] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.664305] pci 0000:00:1b.0: PME# disabled
[   17.974114] HDA Intel 0000:00:1b.0: power state changed by ACPI to D0
[   17.974124] HDA Intel 0000:00:1b.0: power state changed by ACPI to D0
[   17.974135] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 17 (level,
low) -> IRQ 17
[   17.974572] HDA Intel 0000:00:1b.0: irq 48 for MSI/MSI-X
[   17.974611] HDA Intel 0000:00:1b.0: setting latency timer to 64

 The PCI slot 00:1b.0 of the modem card may be disabled early in
 a bootup process,  but then enabled later. If modem drivers load
 but the  modem is not responsive, read DOCs/Bootup.txt about possible fixes.
 Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx
 if help is needed.

===== Advanced Linux Sound Architecture (ALSA) diagnostics =====
The ALSA packages provide audio support and also drivers for some modems.
ALSA diagnostics are written during bootup to /proc/asound/ folders.

The modem cards detected by "aplay -l"  are: None

The /proc/asound/pcm file reports:
00-00: AD198x Analog : AD198x Analog : playback 1 : capture 2
00-03: HDMI 0 : HDMI 0 : playback 1

about /proc/asound/cards:
 0 [Intel          ]: HDA-Intel - HDA Intel
                      HDA Intel at 0x98900000 irq 48

 PCI slot 00:1b.0 has a High Definition Audio Card
 The drivers are in the kernel modules tree at:

 The HDA diagnostics did not recognize a modem chip on the audio subsystem,
 though a Conexant chip modem might not be recognized.

=== Finished firmware and bootup diagnostics, next deducing cogent software. ===

A candidate modem is not transparent among the PCI devices:
00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series
Chipset Integrated Graphics Controller (rev 07)
00:02.1 Display controller: Intel Corporation Mobile 4 Series Chipset
Integrated Graphics Controller (rev 07)
00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio
Controller (rev 03)
00:1f.2 IDE interface: Intel Corporation ICH9M/M-E 2 port SATA IDE
Controller (rev 03)
00:1f.5 IDE interface: Intel Corporation ICH9M/M-E 2 port SATA IDE
Controller (rev 03)
02:00.0 Network controller: Intel Corporation Centrino Wireless-N 1000
85:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8072
PCI-E Gigabit Ethernet Controller (rev 10)
 with USB, bridge, and RAM devices not displayed.
If a High Definition Audio card is present, if might be hosted on the Subsystem.

If your modem is an
   external USB type,
   connected by an external serial cable,
   or mounted internally on an ISA card,
then scanModem would not access it.

Try with Root permission
 $ sudo wvdialconf  /etc/wvdial.conf
 to detect these modem types and some USB modems.
 If the detection is successful, read the DOCs/wvdial.txt .
 Edit the /etc/wvdial.conf with Root permission:
 	sudo  gedit  /etc/wvdial.conf
  will be able to dial out with Root permission:
	sudo wvdial

 Many modems for which scanModem fails have Conexant chips.
 get the ListModem tool, which will report on Conexant chipset modems

 If the above tests fail, please provide any independent information
available on your modem.
 If an alternative boot into Microsoft windows can be done, do mouse
clicks on:
   Start > Settings > Control Panel > Classical View (for Window XP) > System
> Hardware > Device Manager > Modems > Click on the + > Modem. Double click to
expand the graphic. Manufacturer information may be displayed. For example, CXT
stands for Conexant. Click the Diagnostics Tab. Record any hardware ID or vendor
and device information. From the Driver Details TAB, copy out the
VENdor and DEVice information.
Next do the Query Modem and record the ATI specifications displayed such as:
    ATI3 - Agere SoftModem Version 2.1.22
    ATI5 - 2.1.22, AMR Intel MB, AC97 ID:SIL REV:0x27
Try to identify the modem setup file, with name perhaps MODEM.INF.
If may contain chipset Vendor informaton.

Predictive  diagnostics for card in bus 00:1b.0:
	Modem chipset not detected on
NAME="Audio device: Intel Corporation 82801I "

 For candidate modem in:  00:1b.0
   0403 Audio device: Intel Corporation 82801I
      Primary device ID:  8086:293e
    Subsystem PCI_id  103c:3073
    Softmodem codec or chipset from diagnostics:
                               from    Archives:

Support type needed or chipset:	

Support can likely be achieved through two mutually exclusive alternatives:
1) The hsfmodem software for Conexant chipset modems: Read DOCs/Conexant.txt
The following ALSA alternative CANNOT work with Conexant modems.

2) An ALSA modem driver plus slmodemd.  Read DOCs/Smartlink.txt for details, and
to test get the package SLMODEMD_gcc4.5_alsa1.0.23.tar.gz from:

 The base of the UDEV device file system is: /dev/.udev

 Versions adequately match for the compiler installed: 4.5.2
             and the compiler used in kernel assembly: 4.5.2

 Minimal compiling resources appear complete:
   make utility - /usr/bin/make
   Compiler version 4.5
   linuc_headers base folder /lib/modules/2.6.38-11-generic/build

 However some compilations and executable functions may need additional files,
 in the FileNames.h (so called kernel "h"eaders) collection installed
in  /usr/include/ .
 For martian_modem, additional required packages are needed. The also
required headers of package libc6 are commonly installed by default.
 Compiling hsfmodem drivers does require linux-libc-dev and libc6-dev
packages, for kernels 2.6.24 and later versions.
 In not included on your install CD, search for them at
 or comparable Repository for other Linux distros.
 When compiling ALSA drivers, the utility "patch" will also be needed.

If a driver compilation fails, with message including some lack of
some FileName.h (stdio.h for example), then
Some additional kernel-header files need installation to /usr/include.
The minimal additional packages are libc6-dev
and any of its dependents, under Ubuntu linux-libc-dev

If an alternate ethernet connection is available,
$  apt-get update
$  apt-get -s install linux-kernel-devel
will install needed packages.
For Debian/Ubuntu related distributions, run the following command to
display the needed package list:

Otherwise packages have to be found through
Once downloaded and transferred into a Linux partition,
they can be installed alltogether with:
$ sudo dpkg -i *.deb

Checking settings of:	/etc/ppp/options
asyncmap 0
lcp-echo-interval 30
lcp-echo-failure 4

In case of a message like:
   Warning: Could not modify /etc/ppp/pap-secrets: Permission denied

For guidance on FAX usage, get from  get faxing.tar.gz
It has samples for a modem using port /dev/ttySL0, which must be
changed to match your modem's port.

Read Modem/DOCs/YourSystem.txt concerning other COMM channels: eth0
Which can interfere with Browser naviagation.

 Don't worry about the following, it is for experts should trouble
shooting be necessary.

 Checking for modem support lines:
     /device/modem symbolic link:
slmodemd created symbolic link /dev/ttySL0:
     Within /etc/udev/ files:

     Within /etc/modprobe.conf files:
/etc/modprobe.d/alsa-base.conf:options snd-atiixp-modem index=-2
/etc/modprobe.d/alsa-base.conf:options snd-via82xx-modem index=-2
/etc/modprobe.d/blacklist-modem.conf:# Uncomment these entries in
order to blacklist unwanted modem drivers
/etc/modprobe.d/blacklist-modem.conf:# blacklist snd-atiixp-modem
/etc/modprobe.d/blacklist-modem.conf:# blacklist snd-via82xx-modem
/etc/modprobe.d/sl-modem.conf:install slamr /sbin/modprobe -qb
ungrab-winmodem; /sbin/modprobe --ignore-install slamr; test -e
/dev/slamr0 && (chmod 660 /dev/slamr0 && chgrp dialout /dev/slamr0) ||
(/bin/mknod -m 660 /dev/slamr0 c 242 0 2>/dev/null && chgrp dialout
/etc/modprobe.d/sl-modem.conf:install slusb /sbin/modprobe -qb
ungrab-winmodem; /sbin/modprobe --ignore-install slusb; test -e
/dev/slusb0 && (chmod 660 /dev/slusb0 && chgrp dialout /dev/slusb0) ||
(/bin/mknod -m 660 /dev/slusb0 c 243 0 2>/dev/null && chgrp dialout
     Within any ancient /etc/devfs files:

     Within ancient kernel 2.4.n /etc/module.conf files:

--------- end modem support lines --------

[Index of Archives]     [Linux DVB]     [Asterisk]     [Photo]     [DCCP]     [Netdev]     [Xorg]     [Xfree86]     [Fedora Women]     [Linux USB]

Powered by Linux