Re: Antonio Rodulfo, Spain, kernel 2.6.38-11-generic, amd64 distro

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Dear Marvin,

I have just tried to build the hsfmodem module. The "make install"
procedure ended with errors.
Please find attached the logfile compiled by the procedure.

What can I do next?
Thanks a lot in advance.
--
Un saludo,
Kind regards,

Antonio Rodulfo
Ingeniero Industrial, Consultor de Proyectos
Industrial Engineer, Project Consultant



2011/10/7 Antonio Rodulfo <antonio.rodulfo@xxxxxxxxx>:
> Ok, then!
> Thanks, Marvin!
> --
> Un saludo,
> Kind regards,
>
> Antonio Rodulfo
> Ingeniero Industrial, Consultor de Proyectos
> Industrial Engineer, Project Consultant
>
>
>
> 2011/10/7 Marvin Stodolsky <marvin.stodolsky@xxxxxxxxx>:
>> AR
>>
>> Download both packages.
>> Try the hsfmodem package installation alone first.
>> It may abort with message that the linuxant-alsa package is needed.
>>
>> In that case, install the linuxant-alsa package.
>> Then again try the hsfmodem package.
>>
>> MarvS
>>
>> On Fri, Oct 7, 2011 at 10:05 AM, Antonio Rodulfo
>> <antonio.rodulfo@xxxxxxxxx> wrote:
>>> Dear Marvin,
>>>
>>> Thank you so much for your help.
>>> If I get it right, I must intall the recommended alsa driver first
>>> and, then, download and install the hsfmodem files.
>>> Can you confirm it?
>>>
>>> Thanks in advance.
>>> --
>>> Un saludo,
>>> Kind regards,
>>>
>>> Antonio Rodulfo
>>> Ingeniero Industrial, Consultor de Proyectos
>>> Industrial Engineer, Project Consultant
>>>
>>>
>>>
>>> 2011/10/6 Marvin Stodolsky <marvin.stodolsky@xxxxxxxxx>:
>>>> AR
>>>>
>>>> for x86_64 systems you can use hsfmodem-7.80.02.06x86_64full.tar.gz
>>>> found near the bottom of http://www.linuxant.com/drivers/hsf/full/downloads.php
>>>> Unpack with
>>>> $ tar zxf hsf*.tar.ggz
>>>> and follow the instructions in the new folder exposed.
>>>>
>>>> You way be informed that it is also necessary to install  from
>>>> http://www.linuxant.com/alsa-driver/ the
>>>>        alsa-driver-linuxant_1.0.23.1_all.deb.zip ,  in which case.
>>>> $ unzip driver*.zip
>>>> $ dpkg -i driver *. deb
>>>> and again start the hsfmodem install.
>>>>
>>>> If the is a mismatch between ALSA versions of the Linuxant and
>>>> packages, you may lose audio support.
>>>> But let's deal with that later.
>>>>
>>>> MarvS
>>>> scanModem maintainer
>>>>
>>>> On Thu, Oct 6, 2011 at 2:08 PM, Antonio Rodulfo
>>>> <antonio.rodulfo@xxxxxxxxx> wrote:
>>>>> Dear Antonio,
>>>>>
>>>>> Thank you so much for your quick answer.
>>>>> I have reviewed the options available at Linuxant's and, sadly,
>>>>> there's no exact package for 2.38.11. In fact, the latest available
>>>>> package seems to match 2.31.17.
>>>>> Moreover, it seems to correspond to the x86, i.e., 32 bits kernel.
>>>>>
>>>>> As far as the web is concerned, I have two options: on the one hand, I
>>>>> can download the available package and try to install and use it
>>>>> (maybe I should cross my fingers?); on the other hand, I can download
>>>>> the generic package and do my best (not that much, for the time being,
>>>>> given my small experience) to get a proper driver compiled /
>>>>> installed.
>>>>> What would you recomend?
>>>>>
>>>>> In case I decide to use the generic package:
>>>>> * is it enough for me to have the proper headers installed or do I
>>>>> need to have the full kernel source?
>>>>> * given the fact I'm using the 64 bits system, shouldn't I use the
>>>>> x86_64 generic package?
>>>>>
>>>>> Thanks a lot in advance.
>>>>>
>>>>> --
>>>>> Un saludo,
>>>>> Kind regards,
>>>>>
>>>>> Antonio Rodulfo
>>>>> Ingeniero Industrial, Consultor de Proyectos
>>>>> Industrial Engineer, Project Consultant
>>>>>
>>>>>
>>>>>
>>>>> 2011/10/6 Antonio Olivares <olivares14031@xxxxxxxxx>:
>>>>>> Antonio,
>>>>>>
>>>>>> scanModem reports that your modem is supported by hsfmodem drivers.
>>>>>> The snd_hda_intel driver is for sound and for certain modems supported
>>>>>> by SLMODEMD variants.
>>>>>>
>>>>>> Predictive  diagnostics for card in bus 00:1b.0:
>>>>>>        Modem chipset  detected on
>>>>>> NAME="Audio device: Intel Corporation N10/ICH 7 Family High Definition
>>>>>> Audio Controller "
>>>>>> CLASS=0403
>>>>>> PCIDEV=8086:27d8
>>>>>> SUBSYS=152d:0753
>>>>>> IRQ=46
>>>>>> HDA2=00:1b.0
>>>>>> SOFT=8086:27d8.HDA
>>>>>> ArchivedChip=0x14f12bfa
>>>>>> CodecClass=14f1
>>>>>> IDENT=hsfmodem
>>>>>> Driver=hsfmodem-drivers
>>>>>>
>>>>>>  For candidate modem in:  00:1b.0
>>>>>>   0403 Audio device: Intel Corporation N10/ICH 7 Family High
>>>>>> Definition Audio Controller
>>>>>>      Primary device ID:  8086:27d8
>>>>>>    Subsystem PCI_id  152d:0753
>>>>>>    Softmodem codec or chipset from diagnostics:
>>>>>>                               from    Archives: 0x14f12bfa
>>>>>>
>>>>>>
>>>>>>
>>>>>> Support type needed or chipset: hsfmodem
>>>>>>
>>>>>>
>>>>>> Writing DOCs/Intel.txt
>>>>>>
>>>>>> For owners of a Dell PCs with Conexant HSF modems, a driver source
>>>>>> package with full speed enabled is available, but requires driver
>>>>>> compiling. Read DOCs/Conexant.txt
>>>>>>
>>>>>>
>>>>>> Modem support packages from Linuxant include resources for compiling drivers.
>>>>>> If an installer package matching your kernel_version  is not provided,
>>>>>> just install a generic code package.
>>>>>>
>>>>>>  From  http://www.linuxant.com/drivers/hsf/full/downloads-ubuntu-x86.php
>>>>>>  download hsfmodem-7.80.02.05full_k2.6.38_11_generic_ubuntu_i386.deb.zip
>>>>>>  Under Linux unpack with:
>>>>>>  $ unzip hsfmodem*.zip
>>>>>>  Then install with:
>>>>>>  $ sudo dpkg -i hsfmodem*.deb
>>>>>>  Subsequently, the modem should be found with
>>>>>>  $ sudo wvdialconf /etc/wvdial.conf
>>>>>>  Edit in your personal information with:
>>>>>>  $ sudo gedit /etc/wvdial.conf
>>>>>>  and try dialing out with:
>>>>>>  $ sudo wvdial.
>>>>>>  See DOCs/Testing.txt  for details.
>>>>>>
>>>>>> Download generic package:
>>>>>>
>>>>>> http://www.linuxant.com/drivers/hsf/full/archive/hsfmodem-7.80.02.06full/hsfmodem_7.80.02.06full_i386.deb.zip
>>>>>> and follow instructions provided
>>>>>>
>>>>>> METHOD B: DEBIAN PACKAGE (*.deb)
>>>>>> If you have obtained the driver package in DEBIAN format:
>>>>>>
>>>>>> 1. install the package with "dpkg -i hsfmodem_{version}_{arch}.deb",
>>>>>> if apt-get or some other tool hasn't already done it for you.
>>>>>>
>>>>>> 2. if necessary, run "hsfconfig" to complete the installation, enter
>>>>>> license information, or to change your modem's configuration.
>>>>>>
>>>>>> If you need to rebuild the Debian generic package from source, you can
>>>>>> get the TAR package, and from the top directory run: "make debdist". A
>>>>>> pre-compiled DEB package for the currently running kernel can be built
>>>>>> using "make debprecomp" instead.
>>>>>>
>>>>>> http://www.linuxant.com/drivers/hsf/install.php
>>>>>>
>>>>>> Sadly you appear to also have a Modem Interrupt assignment which may
>>>>>> affect the drivers, if you install the driver and your modem is
>>>>>> nonresponsive please send us output of dmesg as it says here:
>>>>>>
>>>>>> For candidate card in slot 00:1b.0, firmware information and bootup
>>>>>> diagnostics are:
>>>>>>  PCI slot       PCI ID          SubsystemID     Name
>>>>>>  ----------     ---------       ---------       --------------
>>>>>>  00:1b.0        8086:27d8       152d:0753       Audio device: Intel Corporation N10/ICH 7
>>>>>> Family High Definition Audio Controller
>>>>>>
>>>>>>  Modem interrupt assignment and sharing:
>>>>>>  46:        449          0   PCI-MSI-edge      hda_intel
>>>>>>  --- Bootup diagnostics for card in PCI slot 00:1b.0 ----
>>>>>> [    0.421621] pci 0000:00:1b.0: [8086:27d8] type 0 class 0x000403
>>>>>> [    0.421621] pci 0000:00:1b.0: reg 10: [mem 0xde300000-0xde303fff 64bit]
>>>>>> [    0.421621] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
>>>>>> [    0.421621] pci 0000:00:1b.0: PME# disabled
>>>>>> [   13.536785] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level,
>>>>>> low) -> IRQ 22
>>>>>> [   13.536846] HDA Intel 0000:00:1b.0: irq 46 for MSI/MSI-X
>>>>>> [   13.536874] HDA Intel 0000:00:1b.0: setting latency timer to 64
>>>>>> [46062.850301] HDA Intel 0000:00:1b.0: PCI INT A disabled
>>>>>> [46062.870026] PM: freeze of drv:HDA Intel dev:0000:00:1b.0 complete
>>>>>> after 129.960 msecs
>>>>>> [46063.320332] HDA Intel 0000:00:1b.0: restoring config space at
>>>>>> offset 0x1 (was 0x100006, writing 0x100002)
>>>>>> [46063.419918] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level,
>>>>>> low) -> IRQ 22
>>>>>> [46063.419930] HDA Intel 0000:00:1b.0: setting latency timer to 64
>>>>>> [46063.420029] HDA Intel 0000:00:1b.0: irq 46 for MSI/MSI-X
>>>>>> [51232.280187] HDA Intel 0000:00:1b.0: PCI INT A disabled
>>>>>> [51232.300025] PM: freeze of drv:HDA Intel dev:0000:00:1b.0 complete
>>>>>> after 128.907 msecs
>>>>>> [51232.750333] HDA Intel 0000:00:1b.0: restoring config space at
>>>>>> offset 0x1 (was 0x100006, writing 0x100002)
>>>>>> [51232.849917] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level,
>>>>>> low) -> IRQ 22
>>>>>> [51232.849929] HDA Intel 0000:00:1b.0: setting latency timer to 64
>>>>>> [51232.850033] HDA Intel 0000:00:1b.0: irq 46 for MSI/MSI-X
>>>>>> [76807.210217] HDA Intel 0000:00:1b.0: PCI INT A disabled
>>>>>> [76807.230028] PM: freeze of drv:HDA Intel dev:0000:00:1b.0 complete
>>>>>> after 126.607 msecs
>>>>>> [76807.760333] HDA Intel 0000:00:1b.0: restoring config space at
>>>>>> offset 0x1 (was 0x100006, writing 0x100002)
>>>>>> [76807.858066] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level,
>>>>>> low) -> IRQ 22
>>>>>> [76807.858078] HDA Intel 0000:00:1b.0: setting latency timer to 64
>>>>>> [76807.858155] HDA Intel 0000:00:1b.0: irq 46 for MSI/MSI-X
>>>>>> [87584.890190] HDA Intel 0000:00:1b.0: PCI INT A disabled
>>>>>> [87584.910024] PM: freeze of drv:HDA Intel dev:0000:00:1b.0 complete
>>>>>> after 122.420 msecs
>>>>>> [87585.370333] HDA Intel 0000:00:1b.0: restoring config space at
>>>>>> offset 0x1 (was 0x100006, writing 0x100002)
>>>>>> [87585.461165] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level,
>>>>>> low) -> IRQ 22
>>>>>> [87585.461176] HDA Intel 0000:00:1b.0: setting latency timer to 64
>>>>>> [87585.461254] HDA Intel 0000:00:1b.0: irq 46 for MSI/MSI-X
>>>>>> [123722.470213] HDA Intel 0000:00:1b.0: PCI INT A disabled
>>>>>> [123722.490027] PM: freeze of drv:HDA Intel dev:0000:00:1b.0 complete
>>>>>> after 125.325 msecs
>>>>>> [123723.030325] HDA Intel 0000:00:1b.0: restoring config space at
>>>>>> offset 0x1 (was 0x100006, writing 0x100002)
>>>>>> [123723.125473] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level,
>>>>>> low) -> IRQ 22
>>>>>> [123723.125486] HDA Intel 0000:00:1b.0: setting latency timer to 64
>>>>>> [123723.125563] HDA Intel 0000:00:1b.0: irq 46 for MSI/MSI-X
>>>>>> [171941.990190] HDA Intel 0000:00:1b.0: PCI INT A disabled
>>>>>> [171942.010031] PM: freeze of drv:HDA Intel dev:0000:00:1b.0 complete
>>>>>> after 129.819 msecs
>>>>>> [171942.540332] HDA Intel 0000:00:1b.0: restoring config space at
>>>>>> offset 0x1 (was 0x100006, writing 0x100002)
>>>>>> [171942.639816] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level,
>>>>>> low) -> IRQ 22
>>>>>> [171942.639828] HDA Intel 0000:00:1b.0: setting latency timer to 64
>>>>>> [171942.639901] HDA Intel 0000:00:1b.0: irq 46 for MSI/MSI-X
>>>>>> [219683.870202] HDA Intel 0000:00:1b.0: PCI INT A disabled
>>>>>> [219683.890029] PM: freeze of drv:HDA Intel dev:0000:00:1b.0 complete
>>>>>> after 123.755 msecs
>>>>>> [219684.470333] HDA Intel 0000:00:1b.0: restoring config space at
>>>>>> offset 0x1 (was 0x100006, writing 0x100002)
>>>>>> [219684.570243] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level,
>>>>>> low) -> IRQ 22
>>>>>> [219684.570255] HDA Intel 0000:00:1b.0: setting latency timer to 64
>>>>>> [219684.570328] HDA Intel 0000:00:1b.0: irq 46 for MSI/MSI-X
>>>>>> [271116.110195] HDA Intel 0000:00:1b.0: PCI INT A disabled
>>>>>> [271116.130029] PM: freeze of drv:HDA Intel dev:0000:00:1b.0 complete
>>>>>> after 129.850 msecs
>>>>>> [271116.630347] HDA Intel 0000:00:1b.0: restoring config space at
>>>>>> offset 0x1 (was 0x100006, writing 0x100002)
>>>>>> [271116.727148] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level,
>>>>>> low) -> IRQ 22
>>>>>> [271116.727160] HDA Intel 0000:00:1b.0: setting latency timer to 64
>>>>>> [271116.727233] HDA Intel 0000:00:1b.0: irq 46 for MSI/MSI-X
>>>>>> [298911.650215] HDA Intel 0000:00:1b.0: PCI INT A disabled
>>>>>> [298911.670027] PM: freeze of drv:HDA Intel dev:0000:00:1b.0 complete
>>>>>> after 128.981 msecs
>>>>>> [298912.220335] HDA Intel 0000:00:1b.0: restoring config space at
>>>>>> offset 0x1 (was 0x100006, writing 0x100002)
>>>>>> [298912.310282] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level,
>>>>>> low) -> IRQ 22
>>>>>> [298912.310294] HDA Intel 0000:00:1b.0: setting latency timer to 64
>>>>>> [298912.310367] HDA Intel 0000:00:1b.0: irq 46 for MSI/MSI-X
>>>>>> [350457.090193] HDA Intel 0000:00:1b.0: PCI INT A disabled
>>>>>> [350457.110027] PM: freeze of drv:HDA Intel dev:0000:00:1b.0 complete
>>>>>> after 123.903 msecs
>>>>>> [350457.570330] HDA Intel 0000:00:1b.0: restoring config space at
>>>>>> offset 0x1 (was 0x100006, writing 0x100002)
>>>>>> [350457.663155] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level,
>>>>>> low) -> IRQ 22
>>>>>> [350457.663167] HDA Intel 0000:00:1b.0: setting latency timer to 64
>>>>>> [350457.663241] HDA Intel 0000:00:1b.0: irq 46 for MSI/MSI-X
>>>>>> [401399.270191] HDA Intel 0000:00:1b.0: PCI INT A disabled
>>>>>> [401399.290040] PM: freeze of drv:HDA Intel dev:0000:00:1b.0 complete
>>>>>> after 125.578 msecs
>>>>>> [401399.750334] HDA Intel 0000:00:1b.0: restoring config space at
>>>>>> offset 0x1 (was 0x100006, writing 0x100002)
>>>>>> [401399.850097] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level,
>>>>>> low) -> IRQ 22
>>>>>> [401399.850109] HDA Intel 0000:00:1b.0: setting latency timer to 64
>>>>>> [401399.850180] HDA Intel 0000:00:1b.0: irq 46 for MSI/MSI-X
>>>>>>
>>>>>>  The PCI slot 00:1b.0 of the modem card may be disabled early in
>>>>>>  a bootup process,  but then enabled later. If modem drivers load
>>>>>>  but the  modem is not responsive, read DOCs/Bootup.txt about possible fixes.
>>>>>>  Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx
>>>>>>  if help is needed.
>>>>>>
>>>>>>
>>>>>> Regards,
>>>>>>
>>>>>> Antonio
>>>>>>
>>>>>> On Thu, Oct 6, 2011 at 9:54 AM, Antonio Rodulfo
>>>>>> <antonio.rodulfo@xxxxxxxxx> wrote:
>>>>>>> Dear all,
>>>>>>>
>>>>>>> I've just dowloaded scanModem from your web page, uncompressed and
>>>>>>> executed it in my system.
>>>>>>> Attached you'll find the ModemData.txt it has just produced.
>>>>>>>
>>>>>>> I'm not "afraid" of the file and its contents. However, I can't
>>>>>>> properly interpret it. It says "Potentially useful modem drivers now
>>>>>>> loaded are: snd_hda_intel", but it doesn't conclude if the driver is
>>>>>>> properly supporting the modem or not, nor have I any clue on how to
>>>>>>> actually test it.
>>>>>>>
>>>>>>> Please help!
>>>>>>> --
>>>>>>> Un saludo,
>>>>>>> Kind regards,
>>>>>>>
>>>>>>> Antonio Rodulfo
>>>>>>> Ingeniero Industrial, Consultor de Proyectos
>>>>>>> Industrial Engineer, Project Consultant
>>>>>>>
>>>>>>
>>>>>
>>>>
>>>
>>
>
driver version 7.80.02.06x86_64full
(cd /lib/modules/2.6.38-11-generic/build && make "CNXT_KERNELSRC=/lib/modules/2.6.38-11-generic/build" "M=/usr/lib/hsfmodem/modules" "CC=gcc" clean)
make[1]: Entering directory `/usr/src/linux-headers-2.6.38-11-generic'
make[1]: Leaving directory `/usr/src/linux-headers-2.6.38-11-generic'
(cd /lib/modules/2.6.38-11-generic/build && make "CNXT_KERNELSRC=/lib/modules/2.6.38-11-generic/build" "M=/usr/lib/hsfmodem/modules/GPL/hda" "CC=gcc" "HDA_CFLAGS=-DFOUND_KZALLOC  -DFOUND_TLV   -DFOUND_IRQ_HANDLER_T -DFOUND_DELAYED_WORK  -DFOUND_NO_CTL_ELEM_RW" clean)
make[1]: Entering directory `/usr/src/linux-headers-2.6.38-11-generic'
make[1]: Leaving directory `/usr/src/linux-headers-2.6.38-11-generic'
rm -rf *.o GPL/*.o *.ko GPL/*.ko *.mod.c GPL/*.mod.c .*.cmd GPL/.*.cmd .tmp_versions .tmp_versions  /lib/modules/2.6.38-11-generic/build/.tmp_versions/hsfosspec.mod  /lib/modules/2.6.38-11-generic/build/.tmp_versions/hsfserial.mod  /lib/modules/2.6.38-11-generic/build/.tmp_versions/hsfengine.mod  /lib/modules/2.6.38-11-generic/build/.tmp_versions/hsfpcibasic2.mod  /lib/modules/2.6.38-11-generic/build/.tmp_versions/hsfpcibasic3.mod  /lib/modules/2.6.38-11-generic/build/.tmp_versions/hsfhda.mod  /lib/modules/2.6.38-11-generic/build/.tmp_versions/hsfmc97ich.mod  /lib/modules/2.6.38-11-generic/build/.tmp_versions/hsfmc97via.mod  /lib/modules/2.6.38-11-generic/build/.tmp_versions/hsfmc97ali.mod  /lib/modules/2.6.38-11-generic/build/.tmp_versions/hsfmc97ati.mod  /lib/modules/2.6.38-11-generic/build/.tmp_versions/hsfmc97sis.mod  /lib/modules/2.6.38-11-generic/build/.tmp_versions/hsfsoar.mod Modules.symvers GPL/hda/Modules.symvers Module.symvers GPL/hda/Module.symvers modules.order GPL/hda/modules.order Module.markers GPL/hda/Module.markers
(cd /lib/modules/2.6.38-11-generic/build && make "CNXT_KERNELSRC=/lib/modules/2.6.38-11-generic/build" "M=/usr/lib/hsfmodem/modules" "CC=gcc" modules)
make[1]: Entering directory `/usr/src/linux-headers-2.6.38-11-generic'
  CC [M]  /usr/lib/hsfmodem/modules/mod_engine.o
  CC [M]  /usr/lib/hsfmodem/modules/mod_hda.o
  CC [M]  /usr/lib/hsfmodem/modules/mod_mc97ali.o
  CC [M]  /usr/lib/hsfmodem/modules/mod_mc97ati.o
  CC [M]  /usr/lib/hsfmodem/modules/mod_mc97ich.o
  CC [M]  /usr/lib/hsfmodem/modules/mod_mc97sis.o
  CC [M]  /usr/lib/hsfmodem/modules/mod_mc97via.o
  CC [M]  /usr/lib/hsfmodem/modules/mod_osspec.o
  CC [M]  /usr/lib/hsfmodem/modules/osservices.o
/usr/lib/hsfmodem/modules/osservices.c: In function 'OsInit':
/usr/lib/hsfmodem/modules/osservices.c:1287:80: warning: format '%d' expects type 'int', but argument 2 has type 'long unsigned int'
/usr/lib/hsfmodem/modules/osservices.c:1287:80: warning: format '%d' expects type 'int', but argument 3 has type 'long unsigned int'
/usr/lib/hsfmodem/modules/osservices.c: In function 'cnxthsf_7800206x86_64full_OsRawVPrintf':
/usr/lib/hsfmodem/modules/osservices.c:1320:1: warning: the frame size of 1040 bytes is larger than 1024 bytes
/usr/lib/hsfmodem/modules/osservices.c: In function 'cnxthsf_7800206x86_64full_OsErrorVPrintf':
/usr/lib/hsfmodem/modules/osservices.c:1369:1: warning: the frame size of 1040 bytes is larger than 1024 bytes
/usr/lib/hsfmodem/modules/osservices.c: In function 'cnxthsf_7800206x86_64full_OsDebugVPrintf':
/usr/lib/hsfmodem/modules/osservices.c:1396:1: warning: the frame size of 1040 bytes is larger than 1024 bytes
  CC [M]  /usr/lib/hsfmodem/modules/osstdio.o
  CC [M]  /usr/lib/hsfmodem/modules/osnvm.o
/usr/lib/hsfmodem/modules/osnvm.c:408:8: error: 'MUTEX' undeclared here (not in a function)
make[2]: *** [/usr/lib/hsfmodem/modules/osnvm.o] Error 1
make[1]: *** [_module_/usr/lib/hsfmodem/modules] Error 2
make[1]: Leaving directory `/usr/src/linux-headers-2.6.38-11-generic'
make: *** [all] Error 2

[Index of Archives]     [Linux Media Development]     [Asterisk]     [DCCP]     [Netdev]     [X.org]     [Xfree86]     [Fedora Women]     [Linux USB]

  Powered by Linux