Re: Antonio Rodulfo, Spain, kernel 2.6.38-11-generic, amd64 distro

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Ok, then!
Thanks, Marvin!
--
Un saludo,
Kind regards,

Antonio Rodulfo
Ingeniero Industrial, Consultor de Proyectos
Industrial Engineer, Project Consultant



2011/10/7 Marvin Stodolsky <marvin.stodolsky@xxxxxxxxx>:
> AR
>
> Download both packages.
> Try the hsfmodem package installation alone first.
> It may abort with message that the linuxant-alsa package is needed.
>
> In that case, install the linuxant-alsa package.
> Then again try the hsfmodem package.
>
> MarvS
>
> On Fri, Oct 7, 2011 at 10:05 AM, Antonio Rodulfo
> <antonio.rodulfo@xxxxxxxxx> wrote:
>> Dear Marvin,
>>
>> Thank you so much for your help.
>> If I get it right, I must intall the recommended alsa driver first
>> and, then, download and install the hsfmodem files.
>> Can you confirm it?
>>
>> Thanks in advance.
>> --
>> Un saludo,
>> Kind regards,
>>
>> Antonio Rodulfo
>> Ingeniero Industrial, Consultor de Proyectos
>> Industrial Engineer, Project Consultant
>>
>>
>>
>> 2011/10/6 Marvin Stodolsky <marvin.stodolsky@xxxxxxxxx>:
>>> AR
>>>
>>> for x86_64 systems you can use hsfmodem-7.80.02.06x86_64full.tar.gz
>>> found near the bottom of http://www.linuxant.com/drivers/hsf/full/downloads.php
>>> Unpack with
>>> $ tar zxf hsf*.tar.ggz
>>> and follow the instructions in the new folder exposed.
>>>
>>> You way be informed that it is also necessary to install  from
>>> http://www.linuxant.com/alsa-driver/ the
>>>        alsa-driver-linuxant_1.0.23.1_all.deb.zip ,  in which case.
>>> $ unzip driver*.zip
>>> $ dpkg -i driver *. deb
>>> and again start the hsfmodem install.
>>>
>>> If the is a mismatch between ALSA versions of the Linuxant and
>>> packages, you may lose audio support.
>>> But let's deal with that later.
>>>
>>> MarvS
>>> scanModem maintainer
>>>
>>> On Thu, Oct 6, 2011 at 2:08 PM, Antonio Rodulfo
>>> <antonio.rodulfo@xxxxxxxxx> wrote:
>>>> Dear Antonio,
>>>>
>>>> Thank you so much for your quick answer.
>>>> I have reviewed the options available at Linuxant's and, sadly,
>>>> there's no exact package for 2.38.11. In fact, the latest available
>>>> package seems to match 2.31.17.
>>>> Moreover, it seems to correspond to the x86, i.e., 32 bits kernel.
>>>>
>>>> As far as the web is concerned, I have two options: on the one hand, I
>>>> can download the available package and try to install and use it
>>>> (maybe I should cross my fingers?); on the other hand, I can download
>>>> the generic package and do my best (not that much, for the time being,
>>>> given my small experience) to get a proper driver compiled /
>>>> installed.
>>>> What would you recomend?
>>>>
>>>> In case I decide to use the generic package:
>>>> * is it enough for me to have the proper headers installed or do I
>>>> need to have the full kernel source?
>>>> * given the fact I'm using the 64 bits system, shouldn't I use the
>>>> x86_64 generic package?
>>>>
>>>> Thanks a lot in advance.
>>>>
>>>> --
>>>> Un saludo,
>>>> Kind regards,
>>>>
>>>> Antonio Rodulfo
>>>> Ingeniero Industrial, Consultor de Proyectos
>>>> Industrial Engineer, Project Consultant
>>>>
>>>>
>>>>
>>>> 2011/10/6 Antonio Olivares <olivares14031@xxxxxxxxx>:
>>>>> Antonio,
>>>>>
>>>>> scanModem reports that your modem is supported by hsfmodem drivers.
>>>>> The snd_hda_intel driver is for sound and for certain modems supported
>>>>> by SLMODEMD variants.
>>>>>
>>>>> Predictive  diagnostics for card in bus 00:1b.0:
>>>>>        Modem chipset  detected on
>>>>> NAME="Audio device: Intel Corporation N10/ICH 7 Family High Definition
>>>>> Audio Controller "
>>>>> CLASS=0403
>>>>> PCIDEV=8086:27d8
>>>>> SUBSYS=152d:0753
>>>>> IRQ=46
>>>>> HDA2=00:1b.0
>>>>> SOFT=8086:27d8.HDA
>>>>> ArchivedChip=0x14f12bfa
>>>>> CodecClass=14f1
>>>>> IDENT=hsfmodem
>>>>> Driver=hsfmodem-drivers
>>>>>
>>>>>  For candidate modem in:  00:1b.0
>>>>>   0403 Audio device: Intel Corporation N10/ICH 7 Family High
>>>>> Definition Audio Controller
>>>>>      Primary device ID:  8086:27d8
>>>>>    Subsystem PCI_id  152d:0753
>>>>>    Softmodem codec or chipset from diagnostics:
>>>>>                               from    Archives: 0x14f12bfa
>>>>>
>>>>>
>>>>>
>>>>> Support type needed or chipset: hsfmodem
>>>>>
>>>>>
>>>>> Writing DOCs/Intel.txt
>>>>>
>>>>> For owners of a Dell PCs with Conexant HSF modems, a driver source
>>>>> package with full speed enabled is available, but requires driver
>>>>> compiling. Read DOCs/Conexant.txt
>>>>>
>>>>>
>>>>> Modem support packages from Linuxant include resources for compiling drivers.
>>>>> If an installer package matching your kernel_version  is not provided,
>>>>> just install a generic code package.
>>>>>
>>>>>  From  http://www.linuxant.com/drivers/hsf/full/downloads-ubuntu-x86.php
>>>>>  download hsfmodem-7.80.02.05full_k2.6.38_11_generic_ubuntu_i386.deb.zip
>>>>>  Under Linux unpack with:
>>>>>  $ unzip hsfmodem*.zip
>>>>>  Then install with:
>>>>>  $ sudo dpkg -i hsfmodem*.deb
>>>>>  Subsequently, the modem should be found with
>>>>>  $ sudo wvdialconf /etc/wvdial.conf
>>>>>  Edit in your personal information with:
>>>>>  $ sudo gedit /etc/wvdial.conf
>>>>>  and try dialing out with:
>>>>>  $ sudo wvdial.
>>>>>  See DOCs/Testing.txt  for details.
>>>>>
>>>>> Download generic package:
>>>>>
>>>>> http://www.linuxant.com/drivers/hsf/full/archive/hsfmodem-7.80.02.06full/hsfmodem_7.80.02.06full_i386.deb.zip
>>>>> and follow instructions provided
>>>>>
>>>>> METHOD B: DEBIAN PACKAGE (*.deb)
>>>>> If you have obtained the driver package in DEBIAN format:
>>>>>
>>>>> 1. install the package with "dpkg -i hsfmodem_{version}_{arch}.deb",
>>>>> if apt-get or some other tool hasn't already done it for you.
>>>>>
>>>>> 2. if necessary, run "hsfconfig" to complete the installation, enter
>>>>> license information, or to change your modem's configuration.
>>>>>
>>>>> If you need to rebuild the Debian generic package from source, you can
>>>>> get the TAR package, and from the top directory run: "make debdist". A
>>>>> pre-compiled DEB package for the currently running kernel can be built
>>>>> using "make debprecomp" instead.
>>>>>
>>>>> http://www.linuxant.com/drivers/hsf/install.php
>>>>>
>>>>> Sadly you appear to also have a Modem Interrupt assignment which may
>>>>> affect the drivers, if you install the driver and your modem is
>>>>> nonresponsive please send us output of dmesg as it says here:
>>>>>
>>>>> For candidate card in slot 00:1b.0, firmware information and bootup
>>>>> diagnostics are:
>>>>>  PCI slot       PCI ID          SubsystemID     Name
>>>>>  ----------     ---------       ---------       --------------
>>>>>  00:1b.0        8086:27d8       152d:0753       Audio device: Intel Corporation N10/ICH 7
>>>>> Family High Definition Audio Controller
>>>>>
>>>>>  Modem interrupt assignment and sharing:
>>>>>  46:        449          0   PCI-MSI-edge      hda_intel
>>>>>  --- Bootup diagnostics for card in PCI slot 00:1b.0 ----
>>>>> [    0.421621] pci 0000:00:1b.0: [8086:27d8] type 0 class 0x000403
>>>>> [    0.421621] pci 0000:00:1b.0: reg 10: [mem 0xde300000-0xde303fff 64bit]
>>>>> [    0.421621] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
>>>>> [    0.421621] pci 0000:00:1b.0: PME# disabled
>>>>> [   13.536785] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level,
>>>>> low) -> IRQ 22
>>>>> [   13.536846] HDA Intel 0000:00:1b.0: irq 46 for MSI/MSI-X
>>>>> [   13.536874] HDA Intel 0000:00:1b.0: setting latency timer to 64
>>>>> [46062.850301] HDA Intel 0000:00:1b.0: PCI INT A disabled
>>>>> [46062.870026] PM: freeze of drv:HDA Intel dev:0000:00:1b.0 complete
>>>>> after 129.960 msecs
>>>>> [46063.320332] HDA Intel 0000:00:1b.0: restoring config space at
>>>>> offset 0x1 (was 0x100006, writing 0x100002)
>>>>> [46063.419918] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level,
>>>>> low) -> IRQ 22
>>>>> [46063.419930] HDA Intel 0000:00:1b.0: setting latency timer to 64
>>>>> [46063.420029] HDA Intel 0000:00:1b.0: irq 46 for MSI/MSI-X
>>>>> [51232.280187] HDA Intel 0000:00:1b.0: PCI INT A disabled
>>>>> [51232.300025] PM: freeze of drv:HDA Intel dev:0000:00:1b.0 complete
>>>>> after 128.907 msecs
>>>>> [51232.750333] HDA Intel 0000:00:1b.0: restoring config space at
>>>>> offset 0x1 (was 0x100006, writing 0x100002)
>>>>> [51232.849917] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level,
>>>>> low) -> IRQ 22
>>>>> [51232.849929] HDA Intel 0000:00:1b.0: setting latency timer to 64
>>>>> [51232.850033] HDA Intel 0000:00:1b.0: irq 46 for MSI/MSI-X
>>>>> [76807.210217] HDA Intel 0000:00:1b.0: PCI INT A disabled
>>>>> [76807.230028] PM: freeze of drv:HDA Intel dev:0000:00:1b.0 complete
>>>>> after 126.607 msecs
>>>>> [76807.760333] HDA Intel 0000:00:1b.0: restoring config space at
>>>>> offset 0x1 (was 0x100006, writing 0x100002)
>>>>> [76807.858066] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level,
>>>>> low) -> IRQ 22
>>>>> [76807.858078] HDA Intel 0000:00:1b.0: setting latency timer to 64
>>>>> [76807.858155] HDA Intel 0000:00:1b.0: irq 46 for MSI/MSI-X
>>>>> [87584.890190] HDA Intel 0000:00:1b.0: PCI INT A disabled
>>>>> [87584.910024] PM: freeze of drv:HDA Intel dev:0000:00:1b.0 complete
>>>>> after 122.420 msecs
>>>>> [87585.370333] HDA Intel 0000:00:1b.0: restoring config space at
>>>>> offset 0x1 (was 0x100006, writing 0x100002)
>>>>> [87585.461165] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level,
>>>>> low) -> IRQ 22
>>>>> [87585.461176] HDA Intel 0000:00:1b.0: setting latency timer to 64
>>>>> [87585.461254] HDA Intel 0000:00:1b.0: irq 46 for MSI/MSI-X
>>>>> [123722.470213] HDA Intel 0000:00:1b.0: PCI INT A disabled
>>>>> [123722.490027] PM: freeze of drv:HDA Intel dev:0000:00:1b.0 complete
>>>>> after 125.325 msecs
>>>>> [123723.030325] HDA Intel 0000:00:1b.0: restoring config space at
>>>>> offset 0x1 (was 0x100006, writing 0x100002)
>>>>> [123723.125473] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level,
>>>>> low) -> IRQ 22
>>>>> [123723.125486] HDA Intel 0000:00:1b.0: setting latency timer to 64
>>>>> [123723.125563] HDA Intel 0000:00:1b.0: irq 46 for MSI/MSI-X
>>>>> [171941.990190] HDA Intel 0000:00:1b.0: PCI INT A disabled
>>>>> [171942.010031] PM: freeze of drv:HDA Intel dev:0000:00:1b.0 complete
>>>>> after 129.819 msecs
>>>>> [171942.540332] HDA Intel 0000:00:1b.0: restoring config space at
>>>>> offset 0x1 (was 0x100006, writing 0x100002)
>>>>> [171942.639816] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level,
>>>>> low) -> IRQ 22
>>>>> [171942.639828] HDA Intel 0000:00:1b.0: setting latency timer to 64
>>>>> [171942.639901] HDA Intel 0000:00:1b.0: irq 46 for MSI/MSI-X
>>>>> [219683.870202] HDA Intel 0000:00:1b.0: PCI INT A disabled
>>>>> [219683.890029] PM: freeze of drv:HDA Intel dev:0000:00:1b.0 complete
>>>>> after 123.755 msecs
>>>>> [219684.470333] HDA Intel 0000:00:1b.0: restoring config space at
>>>>> offset 0x1 (was 0x100006, writing 0x100002)
>>>>> [219684.570243] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level,
>>>>> low) -> IRQ 22
>>>>> [219684.570255] HDA Intel 0000:00:1b.0: setting latency timer to 64
>>>>> [219684.570328] HDA Intel 0000:00:1b.0: irq 46 for MSI/MSI-X
>>>>> [271116.110195] HDA Intel 0000:00:1b.0: PCI INT A disabled
>>>>> [271116.130029] PM: freeze of drv:HDA Intel dev:0000:00:1b.0 complete
>>>>> after 129.850 msecs
>>>>> [271116.630347] HDA Intel 0000:00:1b.0: restoring config space at
>>>>> offset 0x1 (was 0x100006, writing 0x100002)
>>>>> [271116.727148] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level,
>>>>> low) -> IRQ 22
>>>>> [271116.727160] HDA Intel 0000:00:1b.0: setting latency timer to 64
>>>>> [271116.727233] HDA Intel 0000:00:1b.0: irq 46 for MSI/MSI-X
>>>>> [298911.650215] HDA Intel 0000:00:1b.0: PCI INT A disabled
>>>>> [298911.670027] PM: freeze of drv:HDA Intel dev:0000:00:1b.0 complete
>>>>> after 128.981 msecs
>>>>> [298912.220335] HDA Intel 0000:00:1b.0: restoring config space at
>>>>> offset 0x1 (was 0x100006, writing 0x100002)
>>>>> [298912.310282] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level,
>>>>> low) -> IRQ 22
>>>>> [298912.310294] HDA Intel 0000:00:1b.0: setting latency timer to 64
>>>>> [298912.310367] HDA Intel 0000:00:1b.0: irq 46 for MSI/MSI-X
>>>>> [350457.090193] HDA Intel 0000:00:1b.0: PCI INT A disabled
>>>>> [350457.110027] PM: freeze of drv:HDA Intel dev:0000:00:1b.0 complete
>>>>> after 123.903 msecs
>>>>> [350457.570330] HDA Intel 0000:00:1b.0: restoring config space at
>>>>> offset 0x1 (was 0x100006, writing 0x100002)
>>>>> [350457.663155] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level,
>>>>> low) -> IRQ 22
>>>>> [350457.663167] HDA Intel 0000:00:1b.0: setting latency timer to 64
>>>>> [350457.663241] HDA Intel 0000:00:1b.0: irq 46 for MSI/MSI-X
>>>>> [401399.270191] HDA Intel 0000:00:1b.0: PCI INT A disabled
>>>>> [401399.290040] PM: freeze of drv:HDA Intel dev:0000:00:1b.0 complete
>>>>> after 125.578 msecs
>>>>> [401399.750334] HDA Intel 0000:00:1b.0: restoring config space at
>>>>> offset 0x1 (was 0x100006, writing 0x100002)
>>>>> [401399.850097] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level,
>>>>> low) -> IRQ 22
>>>>> [401399.850109] HDA Intel 0000:00:1b.0: setting latency timer to 64
>>>>> [401399.850180] HDA Intel 0000:00:1b.0: irq 46 for MSI/MSI-X
>>>>>
>>>>>  The PCI slot 00:1b.0 of the modem card may be disabled early in
>>>>>  a bootup process,  but then enabled later. If modem drivers load
>>>>>  but the  modem is not responsive, read DOCs/Bootup.txt about possible fixes.
>>>>>  Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx
>>>>>  if help is needed.
>>>>>
>>>>>
>>>>> Regards,
>>>>>
>>>>> Antonio
>>>>>
>>>>> On Thu, Oct 6, 2011 at 9:54 AM, Antonio Rodulfo
>>>>> <antonio.rodulfo@xxxxxxxxx> wrote:
>>>>>> Dear all,
>>>>>>
>>>>>> I've just dowloaded scanModem from your web page, uncompressed and
>>>>>> executed it in my system.
>>>>>> Attached you'll find the ModemData.txt it has just produced.
>>>>>>
>>>>>> I'm not "afraid" of the file and its contents. However, I can't
>>>>>> properly interpret it. It says "Potentially useful modem drivers now
>>>>>> loaded are: snd_hda_intel", but it doesn't conclude if the driver is
>>>>>> properly supporting the modem or not, nor have I any clue on how to
>>>>>> actually test it.
>>>>>>
>>>>>> Please help!
>>>>>> --
>>>>>> Un saludo,
>>>>>> Kind regards,
>>>>>>
>>>>>> Antonio Rodulfo
>>>>>> Ingeniero Industrial, Consultor de Proyectos
>>>>>> Industrial Engineer, Project Consultant
>>>>>>
>>>>>
>>>>
>>>
>>
>



[Index of Archives]     [Linux Media Development]     [Asterisk]     [DCCP]     [Netdev]     [X.org]     [Xfree86]     [Fedora Women]     [Linux USB]

  Powered by Linux