Antonio Rodulfo, Spain, kernel 2.6.38-11-generic, amd64 distro

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Dear all,

I've just dowloaded scanModem from your web page, uncompressed and
executed it in my system.
Attached you'll find the ModemData.txt it has just produced.

I'm not "afraid" of the file and its contents. However, I can't
properly interpret it. It says "Potentially useful modem drivers now
loaded are: snd_hda_intel", but it doesn't conclude if the driver is
properly supporting the modem or not, nor have I any clue on how to
actually test it.

Please help!
--
Un saludo,
Kind regards,

Antonio Rodulfo
Ingeniero Industrial, Consultor de Proyectos
Industrial Engineer, Project Consultant
 Only plain text email is forwarded by the  Discuss@xxxxxxxxxxxxx List Server,
 as HTML can contain viruses. Use as the email Subject Line:
           YourName, YourCountry  kernel 2.6.38-11-generic 
 With this Subject Line cogent experts will be alerted, and useful case names left in the Archive.
 YourCountry will enable Country specific guidance. Linux experts in YourCountry 
 can be found through: http://www.linux.org/groups/index.html.
They will know your Country's modem code, which may be essential for dialup service.
Responses from Discuss@xxxxxxxxxxxxx are sometimes blocked by an Internet Provider mail filters.
 So in a day, also check the Archived responses at http://www.linmodems.org 
--------------------------  System information ----------------------------
CPU=x86_64,  Ubuntu ,  ALSA_version=1.0.23
Linux version 2.6.38-11-generic (buildd@allspice) (gcc version 4.5.2 (Ubuntu/Linaro 4.5.2-8ubuntu4) ) #50-Ubuntu SMP Mon Sep 12 21:17:25 UTC 2011
 scanModem update of:  2011_08_08

Distrib_ID=Ubuntu
DistribCodeName=natty
AptRepositoryStem=http://es.archive.ubuntu.com/ubuntu/


The dkms driver upgrade utilities are installed,


Some modem drivers can only be used in 32 bit modem on x86_64 systems,
while some others are competent on x86_64 Systems.  Cases are:
1) http://linmodems.technion.ac.il/bigarch/archive-seventh/msg03119.html 
for the snd-hda-intel audio+modem driver. Also applicable to AC97 modem controllers.
In both cases, 32 bit libraries must be installed to support the slmodemd helper having a precompiled 32 bit component.
2) For USB modems using the slusb.ko driver. 32 bit libraries must be installed to support the slmodemd helper having a precompiled 32 bit component
3) The hsfmodem and hcfpcimodem drivers for Conexant chipsest modes are x86_64 competent.
4) agrsm packages for LSI/AgereSystems softmodems are not competent on x86_64 systems.

 There are no blacklisted modem drivers in /etc/modprobe*  files 

 Potentially useful modem drivers now loaded are:
       snd_hda_intel           

Attached USB devices are:
 ID 1043:8006 iCreate Technologies Corp. Flash Disk 32-256 MB
 ID 174c:5106 ASMedia Technology Inc. 
 ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB
If a cellphone is not detected, see http://ubuntuforums.org/archive/index.php/t-878554.html
A sample report is:  http://linmodems.technion.ac.il/bigarch/archive-nineth/msg00578.html

If a USB modem or cellphone is attached and was not detected, please
provide available information in your request to discuss@xxxxxxxxxxxxx

Candidate PCI devices with modem chips are:
00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 02)
High Definition Audio cards can host modem chips.

For candidate card in slot 00:1b.0, firmware information and bootup diagnostics are:
 PCI slot	PCI ID		SubsystemID	Name
 ----------	---------	---------	--------------
 00:1b.0	8086:27d8	152d:0753	Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller 

 Modem interrupt assignment and sharing: 
 46:        449          0   PCI-MSI-edge      hda_intel
 --- Bootup diagnostics for card in PCI slot 00:1b.0 ----
[    0.421621] pci 0000:00:1b.0: [8086:27d8] type 0 class 0x000403
[    0.421621] pci 0000:00:1b.0: reg 10: [mem 0xde300000-0xde303fff 64bit]
[    0.421621] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.421621] pci 0000:00:1b.0: PME# disabled
[   13.536785] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[   13.536846] HDA Intel 0000:00:1b.0: irq 46 for MSI/MSI-X
[   13.536874] HDA Intel 0000:00:1b.0: setting latency timer to 64
[46062.850301] HDA Intel 0000:00:1b.0: PCI INT A disabled
[46062.870026] PM: freeze of drv:HDA Intel dev:0000:00:1b.0 complete after 129.960 msecs
[46063.320332] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002)
[46063.419918] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[46063.419930] HDA Intel 0000:00:1b.0: setting latency timer to 64
[46063.420029] HDA Intel 0000:00:1b.0: irq 46 for MSI/MSI-X
[51232.280187] HDA Intel 0000:00:1b.0: PCI INT A disabled
[51232.300025] PM: freeze of drv:HDA Intel dev:0000:00:1b.0 complete after 128.907 msecs
[51232.750333] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002)
[51232.849917] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[51232.849929] HDA Intel 0000:00:1b.0: setting latency timer to 64
[51232.850033] HDA Intel 0000:00:1b.0: irq 46 for MSI/MSI-X
[76807.210217] HDA Intel 0000:00:1b.0: PCI INT A disabled
[76807.230028] PM: freeze of drv:HDA Intel dev:0000:00:1b.0 complete after 126.607 msecs
[76807.760333] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002)
[76807.858066] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[76807.858078] HDA Intel 0000:00:1b.0: setting latency timer to 64
[76807.858155] HDA Intel 0000:00:1b.0: irq 46 for MSI/MSI-X
[87584.890190] HDA Intel 0000:00:1b.0: PCI INT A disabled
[87584.910024] PM: freeze of drv:HDA Intel dev:0000:00:1b.0 complete after 122.420 msecs
[87585.370333] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002)
[87585.461165] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[87585.461176] HDA Intel 0000:00:1b.0: setting latency timer to 64
[87585.461254] HDA Intel 0000:00:1b.0: irq 46 for MSI/MSI-X
[123722.470213] HDA Intel 0000:00:1b.0: PCI INT A disabled
[123722.490027] PM: freeze of drv:HDA Intel dev:0000:00:1b.0 complete after 125.325 msecs
[123723.030325] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002)
[123723.125473] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[123723.125486] HDA Intel 0000:00:1b.0: setting latency timer to 64
[123723.125563] HDA Intel 0000:00:1b.0: irq 46 for MSI/MSI-X
[171941.990190] HDA Intel 0000:00:1b.0: PCI INT A disabled
[171942.010031] PM: freeze of drv:HDA Intel dev:0000:00:1b.0 complete after 129.819 msecs
[171942.540332] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002)
[171942.639816] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[171942.639828] HDA Intel 0000:00:1b.0: setting latency timer to 64
[171942.639901] HDA Intel 0000:00:1b.0: irq 46 for MSI/MSI-X
[219683.870202] HDA Intel 0000:00:1b.0: PCI INT A disabled
[219683.890029] PM: freeze of drv:HDA Intel dev:0000:00:1b.0 complete after 123.755 msecs
[219684.470333] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002)
[219684.570243] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[219684.570255] HDA Intel 0000:00:1b.0: setting latency timer to 64
[219684.570328] HDA Intel 0000:00:1b.0: irq 46 for MSI/MSI-X
[271116.110195] HDA Intel 0000:00:1b.0: PCI INT A disabled
[271116.130029] PM: freeze of drv:HDA Intel dev:0000:00:1b.0 complete after 129.850 msecs
[271116.630347] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002)
[271116.727148] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[271116.727160] HDA Intel 0000:00:1b.0: setting latency timer to 64
[271116.727233] HDA Intel 0000:00:1b.0: irq 46 for MSI/MSI-X
[298911.650215] HDA Intel 0000:00:1b.0: PCI INT A disabled
[298911.670027] PM: freeze of drv:HDA Intel dev:0000:00:1b.0 complete after 128.981 msecs
[298912.220335] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002)
[298912.310282] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[298912.310294] HDA Intel 0000:00:1b.0: setting latency timer to 64
[298912.310367] HDA Intel 0000:00:1b.0: irq 46 for MSI/MSI-X
[350457.090193] HDA Intel 0000:00:1b.0: PCI INT A disabled
[350457.110027] PM: freeze of drv:HDA Intel dev:0000:00:1b.0 complete after 123.903 msecs
[350457.570330] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002)
[350457.663155] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[350457.663167] HDA Intel 0000:00:1b.0: setting latency timer to 64
[350457.663241] HDA Intel 0000:00:1b.0: irq 46 for MSI/MSI-X
[401399.270191] HDA Intel 0000:00:1b.0: PCI INT A disabled
[401399.290040] PM: freeze of drv:HDA Intel dev:0000:00:1b.0 complete after 125.578 msecs
[401399.750334] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002)
[401399.850097] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[401399.850109] HDA Intel 0000:00:1b.0: setting latency timer to 64
[401399.850180] HDA Intel 0000:00:1b.0: irq 46 for MSI/MSI-X

 The PCI slot 00:1b.0 of the modem card may be disabled early in 
 a bootup process,  but then enabled later. If modem drivers load 
 but the  modem is not responsive, read DOCs/Bootup.txt about possible fixes.
 Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx
 if help is needed.
 


===== Advanced Linux Sound Architecture (ALSA) diagnostics ===== 
The ALSA packages provide audio support and also drivers for some modems.
ALSA diagnostics are written during bootup to /proc/asound/ folders.

The modem cards detected by "aplay -l"  are: None


The /proc/asound/pcm file reports:
-----------------------
00-00: CONEXANT Analog : CONEXANT Analog : playback 1 : capture 1
00-01: Conexant Digital : Conexant Digital : playback 1

about /proc/asound/cards:
------------------------
 0 [Intel          ]: HDA-Intel - HDA Intel
                      HDA Intel at 0xde300000 irq 46

 PCI slot 00:1b.0 has a High Definition Audio Card
 The drivers are in the kernel modules tree at:
 /lib/modules/2.6.38-11-generic/kernel/sound/pci/hda/snd-hda-intel.ko
/lib/modules/2.6.38-8-generic/kernel/sound/pci/hda/snd-hda-intel.ko
/lib/modules/2.6.38-10-generic/kernel/sound/pci/hda/snd-hda-intel.ko

 The HDA diagnostics did not recognize a modem chip on the audio subsystem,
 though a Conexant chip modem might not be recognized.

=== Finished firmware and bootup diagnostics, next deducing cogent software. ===

Predictive  diagnostics for card in bus 00:1b.0:
	Modem chipset  detected on
NAME="Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller "
CLASS=0403
PCIDEV=8086:27d8
SUBSYS=152d:0753
IRQ=46
HDA2=00:1b.0
SOFT=8086:27d8.HDA
ArchivedChip=0x14f12bfa
CodecClass=14f1
IDENT=hsfmodem
Driver=hsfmodem-drivers

 For candidate modem in:  00:1b.0
   0403 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller 
      Primary device ID:  8086:27d8
    Subsystem PCI_id  152d:0753 
    Softmodem codec or chipset from diagnostics: 
                               from    Archives: 0x14f12bfa
                        
      

Support type needed or chipset:	hsfmodem


Writing DOCs/Intel.txt

For owners of a Dell PCs with Conexant HSF modems, a driver source package with full speed enabled is available, but requires driver compiling. Read DOCs/Conexant.txt


Modem support packages from Linuxant include resources for compiling drivers.  
If an installer package matching your kernel_version  is not provided,
just install a generic code package.

 From  http://www.linuxant.com/drivers/hsf/full/downloads-ubuntu-x86.php
 download hsfmodem-7.80.02.05full_k2.6.38_11_generic_ubuntu_i386.deb.zip 
 Under Linux unpack with:
 $ unzip hsfmodem*.zip
 Then install with:
 $ sudo dpkg -i hsfmodem*.deb
 Subsequently, the modem should be found with
 $ sudo wvdialconf /etc/wvdial.conf
 Edit in your personal information with:
 $ sudo gedit /etc/wvdial.conf
 and try dialing out with:
 $ sudo wvdial.
 See DOCs/Testing.txt  for details.
 
 The directions following below need only be pursued, if the above procedures are not adequate.

Start at http://www.linuxant.com/drivers/hsf/downloads-license.php to find the
hsfmodem package matching your System. For several Linux distros, there are
precompiled drivers matched to specific kernels. These have within the FileName,
your KernelVersion:	2.6.38_11_generic
They can be found through http://www.linuxant.com/drivers/hsf/full/downloads.php 
A more precise location may be given a few paragraphs below.
If an EXACT Match with your your KernelVersion is not found, one of the 
"Generic packages with source" near the bottom of the page must be used.
Downloaded packages must be moved into the Linux partition (home folder is OK)
and unzipped with:
	unzip hsf*.zip
The installation command for a .deb suffic packages is, with root/adm permission:
  sudo dpkg -i hsf*.deb
while for .rpm suffix it is, with:
  rpm -i hsf*.rpm
 Read DOCs/Conexant.txt

Writing DOCs/Conexant.txt


 Completed candidate modem analyses.

 The base of the UDEV device file system is: /dev/.udev

 Versions adequately match for the compiler installed: 4.5.2
             and the compiler used in kernel assembly: 4.5.2


 
 Minimal compiling resources appear complete:
   make utility - /usr/bin/make
   Compiler version 4.5
   linuc_headers base folder /lib/modules/2.6.38-11-generic/build

 However some compilations and executable functions may need additional files,
 in the FileNames.h (so called kernel "h"eaders) collection installed in  /usr/include/ .
 For martian_modem, additional required packages are needed. The also required headers of package libc6 are commonly installed by default. 
 Compiling hsfmodem drivers does require linux-libc-dev and libc6-dev packages, for kernels 2.6.24 and later versions.
 In not included on your install CD, search for them at http://packages.ubuntu.com
 or comparable Repository for other Linux distros.
 When compiling ALSA drivers, the utility "patch" will also be needed.




If a driver compilation fails, with message including some lack of some FileName.h (stdio.h for example), then
Some additional kernel-header files need installation to /usr/include. The minimal additional packages are libc6-dev
and any of its dependents, under Ubuntu linux-libc-dev

If an alternate ethernet connection is available,
$  apt-get update
$  apt-get -s install linux-kernel-devel
will install needed packages.
For Debian/Ubuntu related distributions, run the following command to display the needed package list:

Otherwise packages have to be found through http://packages.ubuntu.com
Once downloaded and transferred into a Linux partition,
they can be installed alltogether with:
$ sudo dpkg -i *.deb


Checking pppd properties:
	-rwsr-xr-- 1 root dip 325744 2011-02-04 09:42 /usr/sbin/pppd

In case of an "error 17" "serial loopback" problem, see:
    http://linmodems.technion.ac.il/linmodems/archive-sixth/msg02637.html

To enable dialout without Root permission do:
	$ su - root  (not for Ubuntu)
        sudo chmod a+x /usr/sbin/pppd
or under Ubuntu related Linuxes
	sudo chmod a+x /usr/sbin/pppd

Checking settings of:	/etc/ppp/options
asyncmap 0
noauth
crtscts
lock
hide-password
modem
lcp-echo-interval 30
lcp-echo-failure 4
noipx

In case of a message like:
   Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html

For guidance on FAX usage, get from http://linmodems.technion.ac.il/packages/  get faxing.tar.gz
It has samples for a modem using port /dev/ttySL0, which must be changed to match your modem's port.

Read Modem/DOCs/YourSystem.txt concerning other COMM channels: eth0
Which can interfere with Browser naviagation.

 Don't worry about the following, it is for experts should trouble shooting be necessary.
==========================================================

 Checking for modem support lines:
 --------------------------------------
     /device/modem symbolic link:   
slmodemd created symbolic link /dev/ttySL0:  
     Within /etc/udev/ files:

     Within /etc/modprobe.conf files:
/etc/modprobe.d/blacklist-modem.conf:# Uncomment these entries in order to blacklist unwanted modem drivers
/etc/modprobe.d/blacklist-modem.conf:# blacklist snd-atiixp-modem
/etc/modprobe.d/blacklist-modem.conf:# blacklist snd-via82xx-modem
/etc/modprobe.d/alsa-base.conf:options snd-atiixp-modem index=-2
/etc/modprobe.d/alsa-base.conf:options snd-via82xx-modem index=-2
     Within any ancient /etc/devfs files:

     Within ancient kernel 2.4.n /etc/module.conf files:

--------- end modem support lines --------


[Index of Archives]     [Linux Media Development]     [Asterisk]     [DCCP]     [Netdev]     [X.org]     [Xfree86]     [Fedora Women]     [Linux USB]

  Powered by Linux