11c11040 Agere/LSI, Nickolay Kozlov

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hello!
I have internal 11c11040 Agere modem in my notebook. Latest package agrsm-11c11040-2.1.80-20110811.tar.bz2 compiles successfully, but when I try to modprobe agrmodem module I receive the following message: FATAL: Error inserting agrmodem (/lib/modules/3.0-ARCH/extra/agrmodem.ko): Unknown symbol in module, or unknown parameter (see dmesg)
Any help would be appreciatted. Thanks in advance.

scanModem output:

Only plain text email is forwarded by the Discuss@xxxxxxxxxxxxx List Server,
 as HTML can contain viruses. Use as the email Subject Line:
           YourName, YourCountry 
Arch Linux  kernel 3.0-ARCH
With this Subject Line cogent experts will be alerted, and useful case names left in the Archive. YourCountry will enable Country specific guidance. Linux experts in YourCountry
 can be found through: http://www.linux.org/groups/index.html.
They will know your Country's modem code, which may be essential for dialup service. Responses from Discuss@xxxxxxxxxxxxx are sometimes blocked by an Internet Provider mail filters. So in a day, also check the Archived responses at http://www.linmodems.org
--------------------------  System information ----------------------------
CPU=i686,  
Arch ,  ALSA_version=1.0.24
Linux version 3.0-ARCH (tobias@T-POWA-LX) (gcc version 4.6.1 20110819 (prerelease) (GCC) ) #1 SMP PREEMPT Tue Aug 30 07:32:23 UTC 2011
 scanModem update of:  2011_08_08

/etc/lsb-release not found


The dkms driver upgrade utilities are installed,

 There are no blacklisted modem drivers in /etc/modprobe*  files

 Potentially useful modem drivers now loaded are:
       snd_hda_intel

Attached USB devices are:
 ID 174f:5931 Syntek
 ID 0a5c:2101 Broadcom Corp. Bluetooth Controller
If a cellphone is not detected, see http://ubuntuforums.org/archive/index.php/t-878554.html A sample report is: http://linmodems.technion.ac.il/bigarch/archive-nineth/msg00578.html

If a USB modem or cellphone is attached and was not detected, please
provide available information in your request to discuss@xxxxxxxxxxxxx

Candidate PCI devices with modem chips are:
00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03)
High Definition Audio cards can host modem chips.

For candidate card in slot 00:1b.0, firmware information and bootup diagnostics are:
 PCI slot    PCI ID        SubsystemID    Name
 ----------    ---------    ---------    --------------
00:1b.0 8086:293e 144d:c521 Audio device: Intel Corporation 82801I

 Modem interrupt assignment and sharing:
 46:        544        537   PCI-MSI-edge      hda_intel
 --- Bootup diagnostics for card in PCI slot 00:1b.0 ----
[    0.763899] pci 0000:00:1b.0: [8086:293e] type 0 class 0x000403
[    0.763920] pci 0000:00:1b.0: reg 10: [mem 0xf6700000-0xf6703fff 64bit]
[    0.764001] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.764005] pci 0000:00:1b.0: PME# disabled
[ 7.740686] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[    7.740774] HDA Intel 0000:00:1b.0: irq 46 for MSI/MSI-X
[    7.740810] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 7.791115] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input8 [ 7.877916] input: HDA Intel HDMI/DP as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 [ 7.877992] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 [ 7.878063] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11

 The PCI slot 00:1b.0 of the modem card may be disabled early in
 a bootup process,  but then enabled later. If modem drivers load
but the modem is not responsive, read DOCs/Bootup.txt about possible fixes.
 Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx
 if help is needed.



===== Advanced Linux Sound Architecture (ALSA) diagnostics =====
The ALSA packages provide audio support and also drivers for some modems.
ALSA diagnostics are written during bootup to /proc/asound/ folders.

The modem cards detected by "aplay -l"  are: None


The /proc/asound/pcm file reports:
-----------------------
00-00: ALC262 Analog : ALC262 Analog : playback 1 : capture 1
00-03: HDMI 0 : HDMI 0 : playback 1

about /proc/asound/cards:
------------------------
 0 [Intel          ]: HDA-Intel - HDA Intel
                      HDA Intel at 0xf6700000 irq 46

 PCI slot 00:1b.0 has a High Definition Audio Card
 The drivers are in the kernel modules tree at:

 The modem codec file for the HDA card is: /proc/asound/card0/codec#1
--------------------------------------------------------
Codec: LSI ID 1040
Address: 1
MFG Function Id: 0x2 (unsol 1)
Vendor Id: 0x11c11040
Subsystem Id: 0x2118144d
Revision Id: 0x100200
Modem Function Group: 0x1

 The audio card hosts a softmodem chip:  0x11c11040

The softmodem chip 11c11040 is hosted on the Subsytem of the High Definition Audio card, and is supported by the AgereSystems/LSI driver pair agrmodem + agrserial, which is provided by the most current package agrsm-11c11040-version at http://linmodems.technion.ac.il/packages/ltmodem/11c11040/

If not a Conexant modem, the driver agrsm with its dependent drivers:

----------
provide audio + modem support with the modem chip residing on the subsystem.
Any particular card can host any one of several soft modem chips.

=== Finished firmware and bootup diagnostics, next deducing cogent software. ===

Predictive  diagnostics for card in bus 00:1b.0:
    Modem chipset  detected on
NAME="Audio device: Intel Corporation 82801I "
CLASS=0403
PCIDEV=8086:293e
SUBSYS=144d:c521
IRQ=46
HDA2=00:1b.0
SOFT=8086:293e.HDA
HDAchipVendorID=11c1
CHIP=0x11c11040
IDENT=agrsm
Driver=agrsm
package=agrsm-11c11040

 For candidate modem in:  00:1b.0
   0403 Audio device: Intel Corporation 82801I
      Primary device ID:  8086:293e
    Subsystem PCI_id  144d:c521
    Softmodem codec or chipset from diagnostics: 0x11c11040
                               from    Archives:
                        The HDA card softmodem chip is 0x11c11040


Support type needed or chipset:    agrsm


Writing DOCs/Intel.txt

The AgereSystems/LSI agrsm code supports compiling of a agrmodem + agrserial driver pair. There are a few different chipsets which use this driver pair, but they use different code resources:
Chipsets            KV*    PackageNames (most current as of November 2009)
----------------------------------------------------------------------------------------------
11c1:048c and 11c1:048f 2.6.29 agrsm048pci-2.1.60_20100108_i386.deb or agrsm048pci-2.1.60_20100108.tar.gz 11c1:0620 2.6.31 agrsm06pci-2.1.80_20100106_i386.deb or agrsm06pci-2.1.80~20100106.tar.gz !! 11c11040 (on HDA audio cards) 2.6.31 agrsm-11c11040_20091225_i386.deb or agrsm-11c11040-2.1.80~20091225.tar.bz2 !! All available at: http://linmodems.technion.ac.il/packages/ltmodem/11c11040/
Additionally there are;
automation & testing agrsm-tools_0.0.1_all.deb or agrsm-tools-0.0.1-2.noarch.rpm
General background                      agrsm_howto.txt
------------------------------------------------------------------------------------------------
* KV == latest kernel release with a reported success
!! Latest update with major credit to  Nikolay Zhuravlev
But see conflict issue: http://linmodems.technion.ac.il/bigarch/archive-nineth/msg02753.html For the 11c11040 chip with kernels 2.6.31 and later a change in a modules loading settingmay be necessary. Within the file /etc/modprobe.d/alsa-base.conf (or equivalent for your Distro), change the phrase:
      options snd-hda-intel power_save=10
   to:
      options snd-hda-intel power_save=0
or the agrsm drivers will not function. For Ubuntu related systems this can be done with:
   $ sudo gedit /etc/modprobe.d/alsa-base.conf

Report from  Bjorn Wielens:
Please note- trying to load the modules on a OpenSuSE 11.2 system gives
 an error about the module_version symbol. Using:
# modprobe --force agrmodem
# modprobe --force agrserial
is necessary to load the drivers, and does not appear to cause ill effects.


All of the above packages are dkms competent. This means that if your Linux distros dkms package is previously installed, if provides for future updates matching forthcoming kernels.

-------------- end Agere Systems section -------------------

 Completed candidate modem analyses.

 A UDEV device file system is not active.

 Versions adequately match for the compiler installed: 4.6.1
             and the compiler used in kernel assembly: 4.6.1

linux-headers-3.0-ARCH resources needed for compiling are not manifestly ready!

 If compiling is necessary packages must be installed, providing:
     kernel-source-3.0-ARCH


If a driver compilation fails, with message including some lack of some FileName.h (stdio.h for example), then Some additional kernel-header files need installation to /usr/include. The minimal additional packages are libc6-dev
and any of its dependents, under Ubuntu linux-libc-dev

If an alternate ethernet connection is available,
$  apt-get update
$  apt-get -s install linux-kernel-devel
will install needed packages.
For Debian/Ubuntu related distributions, run the following command to display the needed package list:

Otherwise packages have to be found through http://packages.ubuntu.com
Once downloaded and transferred into a Linux partition,
they can be installed alltogether with:
$ sudo dpkg -i *.deb


Checking pppd properties:
    -r-xr-xr-x 1 root root 265044 февр.  9  2011 /usr/sbin/pppd

In case of an "error 17" "serial loopback" problem, see:
http://linmodems.technion.ac.il/linmodems/archive-sixth/msg02637.html

To enable dialout without Root permission do:
    $ su - root  (not for Ubuntu)
         chmod a+x /usr/sbin/pppd
or under Ubuntu related Linuxes
     chmod a+x /usr/sbin/pppd

Checking settings of:    /etc/ppp/options
asyncmap 0
auth
crtscts
lock
hide-password
modem
proxyarp
lcp-echo-interval 30
lcp-echo-failure 4
noipx

In case of a message like:
   Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html

For guidance on FAX usage, get from http://linmodems.technion.ac.il/packages/ get faxing.tar.gz It has samples for a modem using port /dev/ttySL0, which must be changed to match your modem's port.

Read Modem/DOCs/YourSystem.txt concerning other COMM channels: eth0 pan1 wlan0
Which can interfere with Browser naviagation.

Don't worry about the following, it is for experts should trouble shooting be necessary.
==========================================================

 Checking for modem support lines:
 --------------------------------------
     /device/modem symbolic link:
slmodemd created symbolic link /dev/ttySL0:
     Within /etc/udev/ files:

     Within /etc/modprobe.conf files:

     Within any ancient /etc/devfs files:

     Within ancient kernel 2.4.n /etc/module.conf files:

--------- end modem support lines --------

dmesg output:

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.0-ARCH (tobias@T-POWA-LX) (gcc version 4.6.1 20110819 (prerelease) (GCC) ) #1 SMP PREEMPT Tue Aug 30 07:32:23 UTC 2011
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009e400 (usable)
[    0.000000]  BIOS-e820: 000000000009e400 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000007d6a1000 (usable)
[    0.000000]  BIOS-e820: 000000007d6a1000 - 000000007d6a7000 (reserved)
[    0.000000]  BIOS-e820: 000000007d6a7000 - 000000007d7bd000 (usable)
[    0.000000]  BIOS-e820: 000000007d7bd000 - 000000007d80f000 (reserved)
[    0.000000]  BIOS-e820: 000000007d80f000 - 000000007d908000 (usable)
[    0.000000]  BIOS-e820: 000000007d908000 - 000000007db0f000 (reserved)
[    0.000000]  BIOS-e820: 000000007db0f000 - 000000007db18000 (usable)
[    0.000000]  BIOS-e820: 000000007db18000 - 000000007db1f000 (reserved)
[    0.000000]  BIOS-e820: 000000007db1f000 - 000000007db64000 (usable)
[    0.000000]  BIOS-e820: 000000007db64000 - 000000007db9f000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000007db9f000 - 000000007dc00000 (ACPI data)
[    0.000000]  BIOS-e820: 000000007dc00000 - 000000007de00000 (reserved)
[    0.000000]  BIOS-e820: 000000007e000000 - 0000000080000000 (reserved)
[    0.000000]  BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
[    0.000000]  BIOS-e820: 00000000fed10000 - 00000000fed14000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed18000 - 00000000fed1a000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved)
[    0.000000] Notice: NX (Execute Disable) protection missing in CPU!
[    0.000000] DMI present.
[ 0.000000] DMI: SAMSUNG ELECTRONICS CO., LTD. Q310 /Q310 , BIOS 10SU.MP01.20090121.HCW 01/21/2009 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[    0.000000] last_pfn = 0x7db64 max_arch_pfn = 0x100000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-D3FFF write-protect
[    0.000000]   D4000-D7FFF uncachable
[    0.000000]   D8000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 07E000000 mask FFE000000 uncachable
[    0.000000]   1 base 000000000 mask F80000000 write-back
[    0.000000]   2 base 07DC00000 mask FFFC00000 uncachable
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] found SMP MP-table at [c00f7310] f7310
[    0.000000] initial memory mapped : 0 - 00c00000
[    0.000000] Base memory trampoline at [c009a000] 9a000 size 16384
[    0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[    0.000000]  0000000000 - 0000400000 page 4k
[    0.000000]  0000400000 - 0037400000 page 2M
[    0.000000]  0037400000 - 00377fe000 page 4k
[    0.000000] kernel direct mapping tables up to 377fe000 @ bfb000-c00000
[    0.000000] RAMDISK: 7d47a000 - 7d691000
[    0.000000] Allocated new RAMDISK: 375e7000 - 377fdf73
[ 0.000000] Move RAMDISK from 000000007d47a000 - 000000007d690f72 to 375e7000 - 377fdf72
[    0.000000] ACPI: RSDP 000f7270 00024 (v02 PTLTD )
[ 0.000000] ACPI: XSDT 7dbf85c1 00074 (v01 SECCSD LH43STAR 06040000 LTP 00000000) [ 0.000000] ACPI: FACP 7dbe8000 000F4 (v03 INTEL CRESTLNE 06040000 ALAN 00000001) [ 0.000000] ACPI: DSDT 7dbe9000 0652E (v02 Intel CANTIGA 06040000 INTL 20050624)
[    0.000000] ACPI: FACS 7db9efc0 00040
[ 0.000000] ACPI: HPET 7dbfed86 00038 (v01 INTEL CRESTLNE 06040000 LOHR 0000005A) [ 0.000000] ACPI: MCFG 7dbfedbe 0003C (v01 INTEL CRESTLNE 06040000 LOHR 0000005A) [ 0.000000] ACPI: APIC 7dbfedfa 00068 (v01 PTLTD ? APIC 06040000 LTP 00000000) [ 0.000000] ACPI: BOOT 7dbfee62 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001) [ 0.000000] ACPI: SLIC 7dbfee8a 00176 (v01 SECCSD LH43STAR 06040000 LTP 00000000) [ 0.000000] ACPI: SSDT 7dbf865d 00093 (v01 BrtRef DD01BRT 00001000 INTL 20050624) [ 0.000000] ACPI: SSDT 7dbe7000 005F9 (v01 PmRef CpuPm 00003000 INTL 20050624) [ 0.000000] ACPI: SSDT 7dbe6000 00259 (v01 PmRef Cpu0Tst 00003000 INTL 20050624) [ 0.000000] ACPI: SSDT 7dbe5000 0020F (v01 PmRef ApTst 00003000 INTL 20050624)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 1123MB HIGHMEM available.
[    0.000000] 887MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 377fe000
[    0.000000]   low ram: 0 - 377fe000
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   Normal   0x00001000 -> 0x000377fe
[    0.000000]   HighMem  0x000377fe -> 0x0007db64
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[6] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009e
[    0.000000]     0: 0x00000100 -> 0x0007d6a1
[    0.000000]     0: 0x0007d6a7 -> 0x0007d7bd
[    0.000000]     0: 0x0007d80f -> 0x0007d908
[    0.000000]     0: 0x0007db0f -> 0x0007db18
[    0.000000]     0: 0x0007db1f -> 0x0007db64
[    0.000000] On node 0 totalpages: 514188
[ 0.000000] free_area_init_node: node 0, pgdat c05adc80, node_mem_map f662e200
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3950 pages, LIFO batch:0
[    0.000000]   Normal zone: 1744 pages used for memmap
[    0.000000]   Normal zone: 221486 pages, LIFO batch:31
[    0.000000]   HighMem zone: 2247 pages used for memmap
[    0.000000]   HighMem zone: 284729 pages, LIFO batch:31
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000 [ 0.000000] PM: Registered nosave memory: 00000000000dc000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:60000000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 12 pages/cpu @f6000000 s25472 r0 d23680 u2097152
[    0.000000] pcpu-alloc: s25472 r0 d23680 u2097152 alloc=1*4194304
[    0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 510165
[    0.000000] Kernel command line: root=/dev/sda4 ro acpi_backlight=vendor
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Initializing CPU#0
[    0.000000] allocated 8238400 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] Initializing HighMem for node 0 (000377fe:0007db64)
[ 0.000000] Memory: 2023248k/2059664k available (3415k kernel code, 33504k reserved, 1407k data, 500k init, 1147904k highmem)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xfff16000 - 0xfffff000   ( 932 kB)
[    0.000000]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[    0.000000]     vmalloc : 0xf7ffe000 - 0xff7fe000   ( 120 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xf77fe000   ( 887 MB)
[    0.000000]       .init : 0xc05b6000 - 0xc0633000   ( 500 kB)
[    0.000000]       .data : 0xc0455cd5 - 0xc05b5980   (1407 kB)
[    0.000000]       .text : 0xc0100000 - 0xc0455cd5   (3415 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000]     Verbose stalled-CPUs detection is disabled.
[    0.000000] NR_IRQS:512
[    0.000000] CPU 0 irqstacks, hard=f540c000 soft=f540e000
[    0.000000] Extended CMOS year: 2000
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] hpet clockevent registered
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 2161.088 MHz processor.
[ 0.003337] Calibrating delay loop (skipped), value calculated using timer frequency.. 4323.26 BogoMIPS (lpj=7203626)
[    0.003342] pid_max: default: 32768 minimum: 301
[    0.003383] Security Framework initialized
[    0.003389] AppArmor: AppArmor disabled by boot time parameter
[    0.003409] Mount-cache hash table entries: 512
[    0.003616] Initializing cgroup subsys cpuacct
[    0.003628] Initializing cgroup subsys memory
[    0.003639] Initializing cgroup subsys devices
[    0.003641] Initializing cgroup subsys freezer
[    0.003643] Initializing cgroup subsys net_cls
[    0.003645] Initializing cgroup subsys blkio
[    0.003685] CPU: Physical Processor ID: 0
[    0.003687] CPU: Processor Core ID: 0
[    0.003690] mce: CPU supports 6 MCE banks
[    0.003699] CPU0: Thermal monitoring enabled (TM2)
[    0.003703] using mwait in idle threads.
[    0.006743] ACPI: Core revision 20110413
[    0.013347] ftrace: allocating 15364 entries in 31 pages
[    0.016716] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.017049] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.053005] CPU0: Intel(R) Core(TM)2 Duo CPU T5850 @ 2.16GHz stepping 0d [ 0.053330] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
[    0.053330] PEBS disabled due to CPU errata.
[    0.053330] ... version:                2
[    0.053330] ... bit width:              40
[    0.053330] ... generic registers:      2
[    0.053330] ... value mask:             000000ffffffffff
[    0.053330] ... max period:             000000007fffffff
[    0.053330] ... fixed-purpose events:   3
[    0.053330] ... event mask:             0000000700000003
[    0.070121] NMI watchdog enabled, takes one hw-pmu counter.
[    0.096675] CPU 1 irqstacks, hard=f54ca000 soft=f54cc000
[    0.096677] Booting Node   0, Processors  #1 Ok.
[    0.096680] smpboot cpu 1: start_ip = 9a000
[    0.006666] Initializing CPU#1
[    0.193349] NMI watchdog enabled, takes one hw-pmu counter.
[    0.199991] Brought up 2 CPUs
[    0.199994] Total of 2 processors activated (8648.85 BogoMIPS).
[    0.200907] devtmpfs: initialized
[    0.200907] PM: Registering ACPI NVS region at 7db64000 (241664 bytes)
[    0.201070] print_constraints: dummy:
[    0.201127] NET: Registered protocol family 16
[    0.201235] ACPI: bus type pci registered
[ 0.201328] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.201332] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.201334] PCI: Using MMCONFIG for extended config space
[    0.201336] PCI: Using configuration type 1 for base access
[    0.201828] bio: create slab <bio-0> at 0
[    0.204558] ACPI: EC: Look up EC in DSDT
[    0.207733] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.209547] ACPI: SSDT 7db1ac20 00265 (v01 PmRef Cpu0Ist 00003000 INTL 20050624)
[    0.209866] ACPI: Dynamic OEM Table Load:
[ 0.209869] ACPI: SSDT (null) 00265 (v01 PmRef Cpu0Ist 00003000 INTL 20050624) [ 0.210074] ACPI: SSDT 7db18020 00C78 (v01 PmRef Cpu0Cst 00003001 INTL 20050624)
[    0.210374] ACPI: Dynamic OEM Table Load:
[ 0.210377] ACPI: SSDT (null) 00C78 (v01 PmRef Cpu0Cst 00003001 INTL 20050624) [ 0.230249] ACPI: SSDT 7db19ca0 001CF (v01 PmRef ApIst 00003000 INTL 20050624)
[    0.230585] ACPI: Dynamic OEM Table Load:
[ 0.230588] ACPI: SSDT (null) 001CF (v01 PmRef ApIst 00003000 INTL 20050624) [ 0.240080] ACPI: SSDT 7db19f20 0008D (v01 PmRef ApCst 00003000 INTL 20050624)
[    0.240394] ACPI: Dynamic OEM Table Load:
[ 0.240397] ACPI: SSDT (null) 0008D (v01 PmRef ApCst 00003000 INTL 20050624)
[    0.753336] ACPI: Interpreter enabled
[    0.753347] ACPI: (supports S0 S3 S4 S5)
[    0.753369] ACPI: Using IOAPIC for interrupt routing
[ 0.753742] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[    0.757641] ACPI: Power Resource [FN00] (off)
[    0.757641] ACPI: Power Resource [FN01] (off)
[    0.757641] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[    0.757641] ACPI: No dock devices found.
[    0.757641] HEST: Table not found.
[ 0.757641] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.757856] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.758469] pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7]
[    0.758472] pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff]
[ 0.758475] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] [ 0.758478] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff] [ 0.758481] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff] [ 0.758484] pci_root PNP0A08:00: host bridge window [mem 0x80000000-0xfebfffff]
[    0.758499] pci 0000:00:00.0: [8086:2a40] type 0 class 0x000600
[    0.758526] DMAR: Forcing write-buffer flush capability
[    0.758528] DMAR: Disabling IOMMU for graphics on this chipset
[    0.758553] pci 0000:00:02.0: [8086:2a42] type 0 class 0x000300
[    0.758568] pci 0000:00:02.0: reg 10: [mem 0xf6000000-0xf63fffff 64bit]
[ 0.758579] pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.758586] pci 0000:00:02.0: reg 20: [io  0x1800-0x1807]
[    0.758623] pci 0000:00:02.1: [8086:2a43] type 0 class 0x000380
[    0.758636] pci 0000:00:02.1: reg 10: [mem 0xf6400000-0xf64fffff 64bit]
[    0.760028] pci 0000:00:1a.0: [8086:2937] type 0 class 0x000c03
[    0.760088] pci 0000:00:1a.0: reg 20: [io  0x1820-0x183f]
[    0.760149] pci 0000:00:1a.1: [8086:2938] type 0 class 0x000c03
[    0.760210] pci 0000:00:1a.1: reg 20: [io  0x1840-0x185f]
[    0.760270] pci 0000:00:1a.2: [8086:2939] type 0 class 0x000c03
[    0.760330] pci 0000:00:1a.2: reg 20: [io  0x1860-0x187f]
[    0.760403] pci 0000:00:1a.7: [8086:293c] type 0 class 0x000c03
[    0.760431] pci 0000:00:1a.7: reg 10: [mem 0xf6704800-0xf6704bff]
[    0.760526] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[    0.760531] pci 0000:00:1a.7: PME# disabled
[    0.760561] pci 0000:00:1b.0: [8086:293e] type 0 class 0x000403
[    0.760583] pci 0000:00:1b.0: reg 10: [mem 0xf6700000-0xf6703fff 64bit]
[    0.760663] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.760668] pci 0000:00:1b.0: PME# disabled
[    0.760694] pci 0000:00:1c.0: [8086:2940] type 1 class 0x000604
[    0.760777] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.760782] pci 0000:00:1c.0: PME# disabled
[    0.760812] pci 0000:00:1c.2: [8086:2944] type 1 class 0x000604
[    0.760895] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.760899] pci 0000:00:1c.2: PME# disabled
[    0.760928] pci 0000:00:1c.3: [8086:2946] type 1 class 0x000604
[    0.761010] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.761014] pci 0000:00:1c.3: PME# disabled
[    0.761049] pci 0000:00:1d.0: [8086:2934] type 0 class 0x000c03
[    0.761109] pci 0000:00:1d.0: reg 20: [io  0x1880-0x189f]
[    0.761170] pci 0000:00:1d.1: [8086:2935] type 0 class 0x000c03
[    0.761230] pci 0000:00:1d.1: reg 20: [io  0x18a0-0x18bf]
[    0.761293] pci 0000:00:1d.2: [8086:2936] type 0 class 0x000c03
[    0.761354] pci 0000:00:1d.2: reg 20: [io  0x18c0-0x18df]
[    0.761428] pci 0000:00:1d.7: [8086:293a] type 0 class 0x000c03
[    0.761456] pci 0000:00:1d.7: reg 10: [mem 0xf6704c00-0xf6704fff]
[    0.761549] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.761554] pci 0000:00:1d.7: PME# disabled
[    0.761578] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
[    0.761657] pci 0000:00:1f.0: [8086:2919] type 0 class 0x000601
[    0.761793] pci 0000:00:1f.2: [8086:2929] type 0 class 0x000106
[    0.761821] pci 0000:00:1f.2: reg 10: [io  0x1818-0x181f]
[    0.761832] pci 0000:00:1f.2: reg 14: [io  0x180c-0x180f]
[    0.761844] pci 0000:00:1f.2: reg 18: [io  0x1810-0x1817]
[    0.761855] pci 0000:00:1f.2: reg 1c: [io  0x1808-0x180b]
[    0.761867] pci 0000:00:1f.2: reg 20: [io  0x18e0-0x18ff]
[    0.761879] pci 0000:00:1f.2: reg 24: [mem 0xf6704000-0xf67047ff]
[    0.761929] pci 0000:00:1f.2: PME# supported from D3hot
[    0.761933] pci 0000:00:1f.2: PME# disabled
[    0.761955] pci 0000:00:1f.3: [8086:2930] type 0 class 0x000c05
[    0.761977] pci 0000:00:1f.3: reg 10: [mem 0x00000000-0x000000ff 64bit]
[    0.762008] pci 0000:00:1f.3: reg 20: [io  0x1c00-0x1c1f]
[    0.762120] pci 0000:02:00.0: [168c:001c] type 0 class 0x000200
[    0.762150] pci 0000:02:00.0: reg 10: [mem 0xf3000000-0xf300ffff 64bit]
[    0.762264] pci 0000:02:00.0: PME# supported from D3hot
[    0.762270] pci 0000:02:00.0: PME# disabled
[ 0.762299] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[    0.762312] pci 0000:00:1c.0: PCI bridge to [bus 02-03]
[    0.762317] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
[    0.762322] pci 0000:00:1c.0:   bridge window [mem 0xf3000000-0xf3ffffff]
[ 0.762330] pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf0ffffff 64bit pref]
[    0.762388] pci 0000:00:1c.2: PCI bridge to [bus 04-05]
[    0.762392] pci 0000:00:1c.2:   bridge window [io  0x3000-0x3fff]
[    0.762398] pci 0000:00:1c.2:   bridge window [mem 0xf4000000-0xf4ffffff]
[ 0.762405] pci 0000:00:1c.2: bridge window [mem 0xf1000000-0xf1ffffff 64bit pref]
[    0.762618] pci 0000:06:00.0: [11ab:4363] type 0 class 0x000200
[    0.762771] pci 0000:06:00.0: reg 10: [mem 0xf5000000-0xf5003fff 64bit]
[    0.762848] pci 0000:06:00.0: reg 18: [io  0x4000-0x40ff]
[    0.763168] pci 0000:06:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[    0.763469] pci 0000:06:00.0: supports D1 D2
[    0.763472] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.763492] pci 0000:06:00.0: PME# disabled
[    0.770004] pci 0000:00:1c.3: PCI bridge to [bus 06-07]
[    0.770009] pci 0000:00:1c.3:   bridge window [io  0x4000-0x4fff]
[    0.770013] pci 0000:00:1c.3:   bridge window [mem 0xf5000000-0xf5ffffff]
[ 0.770021] pci 0000:00:1c.3: bridge window [mem 0xf2000000-0xf2ffffff 64bit pref] [ 0.770100] pci 0000:00:1e.0: PCI bridge to [bus 08-08] (subtractive decode) [ 0.770105] pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled) [ 0.770111] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff] (disabled) [ 0.770118] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 0.770121] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 0.770124] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 0.770127] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.770129] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode) [ 0.770132] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode) [ 0.770135] pci 0000:00:1e.0: bridge window [mem 0x80000000-0xfebfffff] (subtractive decode)
[    0.770161] pci_bus 0000:00: on NUMA node 0
[    0.770164] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.770402] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[    0.770459] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
[    0.770506] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
[    0.770562]  pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.770566] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[    0.770567] ACPI _OSC control for PCIe not granted, disabling ASPM
[    0.776207] ACPI: PCI Interrupt Link [LNKA] (IRQs *11)
[    0.776254] ACPI: PCI Interrupt Link [LNKB] (IRQs *10)
[    0.776300] ACPI: PCI Interrupt Link [LNKC] (IRQs *5)
[    0.776345] ACPI: PCI Interrupt Link [LNKD] (IRQs *5)
[    0.776389] ACPI: PCI Interrupt Link [LNKE] (IRQs 11) *0, disabled.
[    0.776438] ACPI: PCI Interrupt Link [LNKF] (IRQs *10)
[    0.776483] ACPI: PCI Interrupt Link [LNKG] (IRQs *5)
[    0.776527] ACPI: PCI Interrupt Link [LNKH] (IRQs *5)
[ 0.776610] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.776630] vgaarb: loaded
[    0.776632] vgaarb: bridge control possible 0000:00:02.0
[    0.776725] PCI: Using ACPI for IRQ routing
[    0.786784] PCI: pci_cache_line_size set to 64 bytes
[    0.786913] reserve RAM buffer: 000000000009e400 - 000000000009ffff
[    0.786915] reserve RAM buffer: 000000007d6a1000 - 000000007fffffff
[    0.786920] reserve RAM buffer: 000000007d7bd000 - 000000007fffffff
[    0.786924] reserve RAM buffer: 000000007d908000 - 000000007fffffff
[    0.786927] reserve RAM buffer: 000000007db18000 - 000000007fffffff
[    0.786930] reserve RAM buffer: 000000007db64000 - 000000007fffffff
[    0.787043] NetLabel: Initializing
[    0.787045] NetLabel:  domain hash size = 128
[    0.787047] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.787060] NetLabel:  unlabeled traffic allowed by default
[ 0.787073] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[    0.787079] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[    0.787084] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[    0.796633] Switching to clocksource hpet
[    0.799865] Switched to NOHz mode on CPU #0
[    0.799922] Switched to NOHz mode on CPU #1
[    0.803406] pnp: PnP ACPI init
[    0.803428] ACPI: bus type pnp registered
[    0.803787] pnp 00:00: [bus 00-ff]
[    0.803790] pnp 00:00: [io  0x0000-0x0cf7 window]
[    0.803792] pnp 00:00: [io  0x0cf8-0x0cff]
[    0.803795] pnp 00:00: [io  0x0d00-0xffff window]
[    0.803797] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[    0.803799] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[    0.803802] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[    0.803804] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[    0.803806] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[    0.803808] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[    0.803811] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[    0.803813] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[    0.803815] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[    0.803817] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[    0.803820] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[    0.803822] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[    0.803824] pnp 00:00: [mem 0x000ec000-0x000effff window]
[    0.803826] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[    0.803829] pnp 00:00: [mem 0x80000000-0xfebfffff window]
[    0.803831] pnp 00:00: [mem 0xfed40000-0xfed44fff window]
[ 0.803911] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[    0.804097] pnp 00:01: [io  0x0000-0x001f]
[    0.804100] pnp 00:01: [io  0x0081-0x0091]
[    0.804102] pnp 00:01: [io  0x0093-0x009f]
[    0.804104] pnp 00:01: [io  0x00c0-0x00df]
[    0.804106] pnp 00:01: [dma 4]
[    0.804139] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.804148] pnp 00:02: [mem 0xff000000-0xffffffff]
[    0.804179] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
[    0.804249] pnp 00:03: [mem 0xfed00000-0xfed003ff]
[    0.804315] system 00:03: [mem 0xfed00000-0xfed003ff] has been reserved
[ 0.804318] system 00:03: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[    0.804330] pnp 00:04: [io  0x00f0]
[    0.804342] pnp 00:04: [irq 13]
[    0.804378] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.804391] pnp 00:05: [io  0x002e-0x002f]
[    0.804393] pnp 00:05: [io  0x004e-0x004f]
[    0.804395] pnp 00:05: [io  0x0061]
[    0.804397] pnp 00:05: [io  0x0063]
[    0.804399] pnp 00:05: [io  0x0065]
[    0.804403] pnp 00:05: [io  0x0067]
[    0.804405] pnp 00:05: [io  0x0070]
[    0.804407] pnp 00:05: [io  0x0080]
[    0.804409] pnp 00:05: [io  0x0092]
[    0.804410] pnp 00:05: [io  0x00b2-0x00b3]
[    0.804412] pnp 00:05: [io  0x0680-0x069f]
[    0.804415] pnp 00:05: [io  0x0480-0x048f]
[    0.804417] pnp 00:05: [io  0xffff]
[    0.804419] pnp 00:05: [io  0xffff]
[    0.804420] pnp 00:05: [io  0x0400-0x047f]
[    0.804422] pnp 00:05: [io  0x0480-0x048f]
[    0.804424] pnp 00:05: [io  0x1180-0x11ff]
[    0.804426] pnp 00:05: [io  0x164e-0x164f]
[    0.804428] pnp 00:05: [io  0x5000-0x500f]
[    0.804430] pnp 00:05: [io  0xfe00]
[    0.804494] system 00:05: [io  0x0680-0x069f] has been reserved
[    0.804497] system 00:05: [io  0x0480-0x048f] has been reserved
[    0.804500] system 00:05: [io  0xffff] has been reserved
[    0.804503] system 00:05: [io  0xffff] has been reserved
[    0.804505] system 00:05: [io  0x0400-0x047f] has been reserved
[    0.804508] system 00:05: [io  0x0480-0x048f] has been reserved
[    0.804511] system 00:05: [io  0x1180-0x11ff] has been reserved
[    0.804513] system 00:05: [io  0x164e-0x164f] has been reserved
[    0.804516] system 00:05: [io  0x5000-0x500f] has been reserved
[    0.804518] system 00:05: [io  0xfe00] has been reserved
[    0.804522] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.804544] pnp 00:06: [io  0x06a0-0x06af]
[    0.804546] pnp 00:06: [io  0x06b0-0x06ff]
[    0.804596] system 00:06: [io  0x06a0-0x06af] has been reserved
[    0.804599] system 00:06: [io  0x06b0-0x06ff] has been reserved
[    0.804602] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.804612] pnp 00:07: [io  0x0070-0x0077]
[    0.804618] pnp 00:07: [irq 8]
[    0.804650] pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.804661] pnp 00:08: [io  0x0060]
[    0.804663] pnp 00:08: [io  0x0064]
[    0.804669] pnp 00:08: [irq 1]
[    0.804705] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.804718] pnp 00:09: [irq 12]
[    0.804751] pnp 00:09: Plug and Play ACPI device, IDs PNP0f13 (active)
[    0.804878] pnp 00:0a: [mem 0xfed1c000-0xfed1ffff]
[    0.804881] pnp 00:0a: [mem 0xfed10000-0xfed13fff]
[    0.804883] pnp 00:0a: [mem 0xfed18000-0xfed18fff]
[    0.804885] pnp 00:0a: [mem 0xfed19000-0xfed19fff]
[    0.804887] pnp 00:0a: [mem 0xe0000000-0xefffffff]
[    0.804889] pnp 00:0a: [mem 0xfed20000-0xfed3ffff]
[    0.804891] pnp 00:0a: [mem 0xfed40000-0xfed44fff]
[    0.804893] pnp 00:0a: [mem 0xfed45000-0xfed8ffff]
[    0.804955] system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.804958] system 00:0a: [mem 0xfed10000-0xfed13fff] has been reserved
[    0.804961] system 00:0a: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.804964] system 00:0a: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.804967] system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved
[    0.804970] system 00:0a: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.804973] system 00:0a: [mem 0xfed40000-0xfed44fff] has been reserved
[    0.804975] system 00:0a: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.804979] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.805273] pnp: PnP ACPI: found 11 devices
[    0.805275] ACPI: ACPI bus type pnp unregistered
[    0.841652] PCI: max bus depth: 1 pci_try_num: 2
[ 0.841697] pci 0000:00:1f.3: BAR 0: assigned [mem 0x80000000-0x800000ff 64bit] [ 0.841706] pci 0000:00:1f.3: BAR 0: set to [mem 0x80000000-0x800000ff 64bit] (PCI address [0x80000000-0x800000ff])
[    0.841710] pci 0000:00:1c.0: PCI bridge to [bus 02-03]
[    0.841713] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
[    0.841720] pci 0000:00:1c.0:   bridge window [mem 0xf3000000-0xf3ffffff]
[ 0.841725] pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf0ffffff 64bit pref]
[    0.841732] pci 0000:00:1c.2: PCI bridge to [bus 04-05]
[    0.841736] pci 0000:00:1c.2:   bridge window [io  0x3000-0x3fff]
[    0.841742] pci 0000:00:1c.2:   bridge window [mem 0xf4000000-0xf4ffffff]
[ 0.841748] pci 0000:00:1c.2: bridge window [mem 0xf1000000-0xf1ffffff 64bit pref] [ 0.841756] pci 0000:06:00.0: BAR 6: assigned [mem 0xf2000000-0xf201ffff pref]
[    0.841759] pci 0000:00:1c.3: PCI bridge to [bus 06-07]
[    0.841762] pci 0000:00:1c.3:   bridge window [io  0x4000-0x4fff]
[    0.841768] pci 0000:00:1c.3:   bridge window [mem 0xf5000000-0xf5ffffff]
[ 0.841773] pci 0000:00:1c.3: bridge window [mem 0xf2000000-0xf2ffffff 64bit pref]
[    0.841781] pci 0000:00:1e.0: PCI bridge to [bus 08-08]
[    0.841783] pci 0000:00:1e.0:   bridge window [io  disabled]
[    0.841788] pci 0000:00:1e.0:   bridge window [mem disabled]
[    0.841793] pci 0000:00:1e.0:   bridge window [mem pref disabled]
[    0.841811] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    0.841817] pci 0000:00:1c.0: setting latency timer to 64
[    0.841826] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.841831] pci 0000:00:1c.2: setting latency timer to 64
[    0.841840] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[    0.841845] pci 0000:00:1c.3: setting latency timer to 64
[    0.841853] pci 0000:00:1e.0: setting latency timer to 64
[    0.841857] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.841860] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.841862] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.841865] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff]
[    0.841867] pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff]
[    0.841870] pci_bus 0000:00: resource 9 [mem 0x80000000-0xfebfffff]
[    0.841872] pci_bus 0000:02: resource 0 [io  0x2000-0x2fff]
[    0.841875] pci_bus 0000:02: resource 1 [mem 0xf3000000-0xf3ffffff]
[ 0.841877] pci_bus 0000:02: resource 2 [mem 0xf0000000-0xf0ffffff 64bit pref]
[    0.841880] pci_bus 0000:04: resource 0 [io  0x3000-0x3fff]
[    0.841882] pci_bus 0000:04: resource 1 [mem 0xf4000000-0xf4ffffff]
[ 0.841885] pci_bus 0000:04: resource 2 [mem 0xf1000000-0xf1ffffff 64bit pref]
[    0.841887] pci_bus 0000:06: resource 0 [io  0x4000-0x4fff]
[    0.841890] pci_bus 0000:06: resource 1 [mem 0xf5000000-0xf5ffffff]
[ 0.841892] pci_bus 0000:06: resource 2 [mem 0xf2000000-0xf2ffffff 64bit pref]
[    0.841895] pci_bus 0000:08: resource 4 [io  0x0000-0x0cf7]
[    0.841897] pci_bus 0000:08: resource 5 [io  0x0d00-0xffff]
[    0.841899] pci_bus 0000:08: resource 6 [mem 0x000a0000-0x000bffff]
[    0.841902] pci_bus 0000:08: resource 7 [mem 0x000d4000-0x000d7fff]
[    0.841904] pci_bus 0000:08: resource 8 [mem 0x000d8000-0x000dbfff]
[    0.841907] pci_bus 0000:08: resource 9 [mem 0x80000000-0xfebfffff]
[    0.841953] NET: Registered protocol family 2
[ 0.842026] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.842275] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.842816] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.843051] TCP: Hash tables configured (established 131072 bind 65536)
[    0.843053] TCP reno registered
[    0.843056] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.843065] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.843176] NET: Registered protocol family 1
[    0.843193] pci 0000:00:02.0: Boot video device
[    0.843395] PCI: CLS 64 bytes, default 64
[    0.843454] Unpacking initramfs...
[    0.880093] Freeing initrd memory: 2140k freed
[    0.881141] Simple Boot Flag at 0x37 set to 0x1
[    0.881441] apm: BIOS not found.
[    0.881611] audit: initializing netlink socket (disabled)
[    0.881625] type=2000 audit(1315248361.879:1): initialized
[    0.886302] highmem bounce pool size: 64 pages
[    0.886308] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    0.895724] VFS: Disk quotas dquot_6.5.2
[    0.895812] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.895922] msgmni has been set to 1713
[ 0.896120] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.896151] io scheduler noop registered
[    0.896153] io scheduler deadline registered
[    0.896165] io scheduler cfq registered (default)
[    0.896298] pcieport 0000:00:1c.0: setting latency timer to 64
[    0.896351] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[    0.896430] pcieport 0000:00:1c.2: setting latency timer to 64
[    0.896478] pcieport 0000:00:1c.2: irq 41 for MSI/MSI-X
[    0.896552] pcieport 0000:00:1c.3: setting latency timer to 64
[    0.896600] pcieport 0000:00:1c.3: irq 42 for MSI/MSI-X
[    0.896813] intel_idle: MWAIT substates: 0x22220
[    0.896815] intel_idle: does not run on family 6 model 15
[    0.896821] ERST: Table is not found!
[    0.896835] isapnp: Scanning for PnP cards...
[    1.253172] isapnp: No Plug & Play device found
[    1.253235] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 1.440435] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    1.442918] i8042: Detected active multiplexing controller, rev 1.1
[    1.444044] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.444079] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    1.444106] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    1.444132] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    1.444164] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    1.444251] mousedev: PS/2 mouse device common for all mice
[    1.444441] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[    1.444469] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    1.444490] cpuidle: using governor ladder
[    1.444492] cpuidle: using governor menu
[    1.444735] TCP cubic registered
[    1.444738] NET: Registered protocol family 17
[    1.444745] Registering the dns_resolver key type
[    1.444760] Using IPI No-Shortcut mode
[    1.444841] PM: Hibernation image not present or could not be loaded.
[    1.444846] registered taskstats version 1
[ 1.449119] rtc_cmos 00:07: setting system clock to 2011-09-05 18:46:02 UTC (1315248362)
[    1.449209] Initializing network drop monitor service
[    1.449294] Freeing unused kernel memory: 500k freed
[    1.449509] Write protecting the kernel text: 3416k
[    1.449533] Write protecting the kernel read-only data: 1036k
[    1.462206] udevd[58]: starting version 173
[ 1.472616] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    1.486999] usbcore: registered new interface driver usbfs
[    1.487029] usbcore: registered new interface driver hub
[    1.499718] usbcore: registered new device driver usb
[    1.505879] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.505915] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 19 (level, low) -> IRQ 19
[    1.505938] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[    1.505943] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 1.505978] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[    1.506012] ehci_hcd 0000:00:1a.7: debug port 1
[    1.520660] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
[    1.520687] ehci_hcd 0000:00:1a.7: irq 19, io mem 0xf6704800
[    1.538108] SCSI subsystem initialized
[    1.546834] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[    1.546995] hub 1-0:1.0: USB hub found
[    1.547001] hub 1-0:1.0: 6 ports detected
[ 1.547104] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    1.547126] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    1.547130] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 1.547140] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[    1.547170] ehci_hcd 0000:00:1d.7: debug port 1
[    1.550183] libata version 3.00 loaded.
[    1.551067] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[    1.551088] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf6704c00
[    1.563355] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    1.563518] hub 2-0:1.0: USB hub found
[    1.563523] hub 2-0:1.0: 6 ports detected
[    1.563616] ahci 0000:00:1f.2: version 3.0
[    1.563633] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    1.563690] ahci 0000:00:1f.2: irq 43 for MSI/MSI-X
[    1.563773] ahci: SSS flag set, parallel bus scan disabled
[ 1.563814] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl SATA mode [ 1.563818] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ccc ems sxs
[    1.563824] ahci 0000:00:1f.2: setting latency timer to 64
[    1.583998] scsi0 : ahci
[    1.584102] scsi1 : ahci
[    1.584177] scsi2 : ahci
[    1.584249] scsi3 : ahci
[    1.584322] scsi4 : ahci
[    1.584397] scsi5 : ahci
[ 1.584462] ata1: SATA max UDMA/133 abar m2048@0xf6704000 port 0xf6704100 irq 43 [ 1.584466] ata2: SATA max UDMA/133 abar m2048@0xf6704000 port 0xf6704180 irq 43
[    1.584468] ata3: DUMMY
[    1.584470] ata4: DUMMY
[ 1.584472] ata5: SATA max UDMA/133 abar m2048@0xf6704000 port 0xf6704300 irq 43 [ 1.584476] ata6: SATA max UDMA/133 abar m2048@0xf6704000 port 0xf6704380 irq 43
[    1.592366] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.592434] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.592444] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[    1.592448] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 1.592460] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[    1.592506] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001820
[    1.592668] hub 3-0:1.0: USB hub found
[    1.592672] hub 3-0:1.0: 2 ports detected
[ 1.592752] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[    1.592758] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[    1.592762] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 1.592770] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[    1.592806] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001840
[    1.592939] hub 4-0:1.0: USB hub found
[    1.592943] hub 4-0:1.0: 2 ports detected
[ 1.593020] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 19 (level, low) -> IRQ 19
[    1.593028] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[    1.593031] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 1.593038] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[    1.593066] uhci_hcd 0000:00:1a.2: irq 19, io base 0x00001860
[    1.593196] hub 5-0:1.0: USB hub found
[    1.593201] hub 5-0:1.0: 2 ports detected
[ 1.593271] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    1.593280] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    1.593283] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.593291] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[    1.593318] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001880
[    1.593473] hub 6-0:1.0: USB hub found
[    1.593481] hub 6-0:1.0: 2 ports detected
[ 1.593553] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    1.593560] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    1.593564] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.593571] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[    1.593598] uhci_hcd 0000:00:1d.1: irq 19, io base 0x000018a0
[    1.593730] hub 7-0:1.0: USB hub found
[    1.593734] hub 7-0:1.0: 2 ports detected
[ 1.593805] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    1.593812] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    1.593815] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.593823] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[    1.593858] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018c0
[    1.593991] hub 8-0:1.0: USB hub found
[    1.593995] hub 8-0:1.0: 2 ports detected
[    1.853355] usb 1-3: new high speed USB device number 2 using ehci_hcd
[    1.883353] Refined TSC clocksource calibration: 2161.249 MHz.
[    1.883358] Switching to clocksource tsc
[    1.903355] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.910290] ata1.00: ATA-8: SAMSUNG HM250JI, HS100-06, max UDMA7
[ 1.910293] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    1.917293] ata1.00: configured for UDMA/133
[ 1.917425] scsi 0:0:0:0: Direct-Access ATA SAMSUNG HM250JI HS10 PQ: 0 ANSI: 5
[    2.236685] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.237177] ata2.00: ATAPI: TSSTcorp CDDVDW TS-L633A, SC05, max UDMA/100
[    2.237181] ata2.00: applying bridge limits
[    2.238190] ata2.00: configured for UDMA/100
[ 2.241329] scsi 1:0:0:0: CD-ROM TSSTcorp CDDVDW TS-L633A SC05 PQ: 0 ANSI: 5
[    2.560020] ata5: SATA link down (SStatus 0 SControl 300)
[    2.823345] usb 8-2: new full speed USB device number 2 using uhci_hcd
[    2.880017] ata6: SATA link down (SStatus 0 SControl 300)
[ 2.886320] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[    2.886370] sd 0:0:0:0: [sda] Write Protect is off
[    2.886373] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.886395] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.918787]  sda: sda1 sda2 sda3 sda4
[    2.919129] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.924124] sr0: scsi3-mmc drive: 16x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.924129] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.924305] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 3.607096] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
[    5.230165] udevd[290]: starting version 173
[    5.518200] ACPI: acpi_idle registered with cpuidle
[    5.520415] Monitor-Mwait will be used to enter C-1 state
[    5.520443] Monitor-Mwait will be used to enter C-2 state
[    5.520467] Monitor-Mwait will be used to enter C-3 state
[    5.520473] Marking TSC unstable due to TSC halts in idle
[    5.520502] Switching to clocksource hpet
[ 5.953359] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
[    5.953411] ACPI: Lid Switch [LID0]
[ 5.953486] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[    5.953493] ACPI: Power Button [PWRB]
[ 5.953547] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3
[    5.953551] ACPI: Sleep Button [SLPB]
[ 5.953598] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[    5.953602] ACPI: Power Button [PWRF]
[ 5.956873] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[    5.957918] ACPI: AC Adapter [ADP1] (on-line)
[ 5.959566] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[    5.959574] ACPI: Battery Slot [BAT1] (battery present)
[    6.033129] Linux agpgart interface v0.103
[    6.119998] Samsung-backlight: checking for SABI support.
[    6.120080] Samsung-backlight: SABI is supported (f48da)
[    6.135051] ACPI: Fan [FAN0] (off)
[    6.135051] ACPI: Fan [FAN1] (off)
[    6.136620] thermal LNXTHERM:00: registered as thermal_zone0
[    6.136623] ACPI: Thermal Zone [TZ00] (51 C)
[    6.137129] thermal LNXTHERM:01: registered as thermal_zone1
[    6.137132] ACPI: Thermal Zone [TZ01] (51 C)
[    6.179014] iTCO_vendor_support: vendor-support=0
[    6.180282] sky2: driver version 1.28
[    6.180367] sky2 0000:06:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[    6.180415] sky2 0000:06:00.0: setting latency timer to 64
[    6.180500] sky2 0000:06:00.0: Yukon-2 EC Ultra chip revision 3
[    6.181160] sky2 0000:06:00.0: irq 44 for MSI/MSI-X
[    6.181804] sky2 0000:06:00.0: eth0: addr 00:13:77:b0:56:1b
[    6.192207] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
[ 6.192301] iTCO_wdt: Found a ICH9M TCO device (Version=2, TCOBASE=0x0460)
[    6.192372] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    6.193704] agpgart-intel 0000:00:00.0: Intel GM45 Chipset
[ 6.193833] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[    6.194690] agpgart-intel 0000:00:00.0: detected 32768K stolen memory
[    6.194928] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[    6.425225] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    6.425274] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    6.580684] cfg80211: Calling CRDA to update world regulatory domain
[ 6.635902] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[    6.636049] HDA Intel 0000:00:1b.0: irq 45 for MSI/MSI-X
[    6.636080] HDA Intel 0000:00:1b.0: setting latency timer to 64
[    6.771772] [drm] Initialized drm 1.1.0 20060810
[ 6.791280] ath5k 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    6.791294] ath5k 0000:02:00.0: setting latency timer to 64
[    6.791349] ath5k 0000:02:00.0: registered as 'phy0'
[    6.889672] input: PC Speaker as /devices/platform/pcspkr/input/input5
[    6.925987] Bluetooth: Core ver 2.16
[    6.926189] NET: Registered protocol family 31
[    6.926191] Bluetooth: HCI device and connection manager initialized
[    6.926194] Bluetooth: HCI socket layer initialized
[    6.926196] Bluetooth: L2CAP socket layer initialized
[    6.926264] Bluetooth: SCO socket layer initialized
[    6.964060] Bluetooth: Generic Bluetooth USB driver ver 0.6
[    6.965950] usbcore: registered new interface driver btusb
[    6.970145] hda_codec: ALC262: BIOS auto-probing.
[ 6.970705] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input6
[    6.984416] HDMI status: Pin=3 Presence_Detect=0 ELD_Valid=0
[ 6.987488] input: HDA Intel HDMI/DP as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7 [ 6.987617] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 [ 6.987738] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[    6.988095] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    6.988101] i915 0000:00:02.0: setting latency timer to 64
[    7.024656] i915 0000:00:02.0: irq 46 for MSI/MSI-X
[    7.024663] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[    7.024665] [drm] Driver supports precise vblank timestamp query.
[ 7.024709] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    7.203465] Linux media interface: v0.10
[    7.234519] Linux video capture interface: v2.00
[    7.327490] ath: EEPROM regdomain: 0x65
[    7.327493] ath: EEPROM indicates we should expect a direct regpair map
[    7.327497] ath: Country alpha2 being used: 00
[    7.327499] ath: Regpair used: 0x65
[ 7.341089] uvcvideo: Found UVC 1.00 device USB2.0 UVC PC Camera (174f:5931) [ 7.357835] Synaptics Touchpad, model: 1, fw: 6.3, id: 0x1c0b1, caps: 0xa04711/0xa00000/0x0
[    7.364659] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[    7.364971] ath5k phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70)
[ 7.394585] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input10 [ 7.396181] uvcvideo: UVC non compliance - GET_DEF(PROBE) not supported. Enabling workaround.
[    7.414784] usbcore: registered new interface driver uvcvideo
[    7.414787] USB Video Class driver (v1.1.0)
[    7.794860] fbcon: inteldrmfb (fb0) is primary device
[    7.838481] Console: switching to colour frame buffer device 160x50
[    7.842933] fb0: inteldrmfb frame buffer device
[    7.842935] drm: registered panic notifier
[ 7.843838] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input11 [ 7.843904] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 7.843995] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 7.844028] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 19 (level, low) -> IRQ 19
[    8.568624] EXT4-fs (sda4): re-mounted. Opts: (null)
[   12.773023] Easy slow down manager: checking for SABI support.
[   12.773114] Easy slow down manager: SABI is supported (f48da)
[   14.224636] sky2 0000:06:00.0: eth0: enabling interface
[   14.458388] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   14.560133] Bluetooth: RFCOMM TTY layer initialized
[   14.560145] Bluetooth: RFCOMM socket layer initialized
[   14.560149] Bluetooth: RFCOMM ver 1.11
[   40.121237] fuse init (API version 7.16)
[   46.466607] EXT4-fs (sda4): re-mounted. Opts: commit=0
[   47.492800] NET: Registered protocol family 10
[   47.493847] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   47.494044] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   47.532262] WARNING! power/level is deprecated; use power/control instead
[   48.991876] Bridge firewalling registered
[   49.959209] NET: Registered protocol family 4
[   49.971750] NET: Registered protocol family 5
[   49.973018] ADDRCONF(NETDEV_UP): pan1: link is not ready
[   59.657494] wlan0: authenticate with 00:1b:11:37:de:b4 (try 1)
[   59.659012] wlan0: authenticated
[   59.659160] wlan0: associate with 00:1b:11:37:de:b4 (try 1)
[ 59.661275] wlan0: RX AssocResp from 00:1b:11:37:de:b4 (capab=0x411 status=0 aid=1)
[   59.661279] wlan0: associated
[   59.661939] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   70.563407] wlan0: no IPv6 routers present
[ 1252.792111] agrmodem: module license 'Proprietary' taints kernel.
[ 1252.792116] Disabling lock debugging due to kernel taint
[ 1252.794659] agrmodem: Unknown symbol usb_free_urb (err 0)
[ 1252.794696] agrmodem: Unknown symbol usb_get_dev (err 0)
[ 1252.794731] agrmodem: Unknown symbol usb_free_coherent (err 0)
[ 1252.794765] agrmodem: Unknown symbol usb_deregister (err 0)
[ 1252.794845] agrmodem: Unknown symbol usb_control_msg (err 0)
[ 1252.794879] agrmodem: Unknown symbol usb_set_interface (err 0)
[ 1252.794941] agrmodem: Unknown symbol snd_hda_codec_read (err 0)
[ 1252.794979] agrmodem: Unknown symbol usb_alloc_coherent (err 0)
[ 1252.795015] agrmodem: Unknown symbol usb_submit_urb (err 0)
[ 1252.795046] agrmodem: Unknown symbol usb_register_driver (err 0)
[ 1252.795087] agrmodem: Unknown symbol snd_hda_codec_write (err 0)
[ 1252.795124] agrmodem: Unknown symbol usb_alloc_urb (err 0)
[ 1252.795161] agrmodem: Unknown symbol usb_put_dev (err 0)




[Index of Archives]     [Linux Media Development]     [Asterisk]     [DCCP]     [Netdev]     [X.org]     [Xfree86]     [Fedora Women]     [Linux USB]

  Powered by Linux