Re: no dial-up: hsfmodem and alsa-driver-linuxant problem?

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Jeff,

The advice may now be stall.  So please just do the standard install
and report back.
On my Ubuntu Natty system, the hsfmodem compile was OK, though I don't
have Conexant modem hardware.

MarvS

On Sat, Aug 27, 2011 at 6:29 PM, Jeffrey Cohan <cohanjeffrey@xxxxxxx> wrote:
> Hi Marv,
>
> I actually never had a
> /usr/lib/hcfpcimodem/
> folder on my system. I misled you by giving in my email the list of
> substitutions that Jonathan gave, instead of the ones I ACTUALLY did for
> which I substituted  /hsfmodem/  (the same files existed in this folder).
> Sorry. But perhaps it is a good idea to clean up - I'll do so and reinstall!
> Should I follow the substitution advice from the 11.04 link on the
> DialupModemHowtoConexant page as before? If I don't hear from you I'll try
> installing it before and then after these fixes.
> Thanks,
> Jeff
>
> (and I could reinstall Ubuntu if you think I might have corrupted something)
>
>
> -----Original Message-----
> From: Marvin Stodolsky <marvin.stodolsky@xxxxxxxxx>
> To: Jeffrey Cohan <cohanjeffrey@xxxxxxx>
> Cc: discuss@xxxxxxxxxxxxx; olivares14031@xxxxxxxxx
> Sent: Sat, Aug 27, 2011 2:56 pm
> Subject: Re: no dial-up: hsfmodem and alsa-driver-linuxant problem?
>
> Jeff
>
> Installing the hsfmodem on my System, there was not created a folder
>  /usr/lib/hcfpcimodem/
> So some odd remnants seem to be on your System
>
> I suggest doing uninstalls on all your modem packages , just to clean up
> To get the Names for the uninstalls, do
> $ sudo apt-cache search hsf
> which will display the installaled package Name
> Then
> $ sudo apt-get remove Name
> will uninstall it.
>
> Repeat with:
> $ sudo apt-cache search hcf
> etc.
>
> Then please again try the install of the  hsfmodem package
>
> MarvS
>
> On Sat, Aug 27, 2011 at 5:31 PM, Jeffrey Cohan <cohanjeffrey@xxxxxxx> wrote:
>> Hi Marv,
>>
>> Actually the HP is the 64-bit machine withthe 11c11040 chip. On the VAIO I
>> did use
>> hsfmodem-7.80.02.06full.tar.gz
>> which I'm guessing is correct for the 32-bit Vaio, and I followed exactly
>> the instructions on the "for Ubuntu 11.04" link on the
>> DialupModemHowtoConexant page, making substitutions called for, and got
>> "Warning: no device detected by hsf driver - HDA modems may require
>> reboot"
>> and "Note: HDA support not compiled in the driver"
>>  - exactly as when I had previously followed Jonathan's slightly different
>> substitutions. Ah, you were confused as I did in fact make these changes
>> in
>> the hsfmodem folder and not an hcfmodem folder, which I did not have.
>>
>> But perhaps I did successfully install the USB modem package? (see last
>> email) Hope so...
>>
>> Jeff
>>
>>
>> -----Original Message-----
>> From: Marvin Stodolsky <marvin.stodolsky@xxxxxxxxx>
>> To: Jeffrey Cohan <cohanjeffrey@xxxxxxx>; Linmodems
>> <discuss@xxxxxxxxxxxxx>
>> Sent: Sat, Aug 27, 2011 1:58 pm
>> Subject: Re: no dial-up: hsfmodem and alsa-driver-linuxant problem?
>>
>> Jeff
>>
>> Let's summarize and clarify some issues.
>> With respect to the VIAO PC x86_64 , with the 11c11040 modem chip
>> there is no support. If you want to install the 32 bit Ubuntu variant on
>> this PC
>> there may be support.  We haven't had a clean test since Antonio did a
>> code update,
>> but compilng is OK on Ubuntu Natty 32 bit
>>
>> With respect to the HP PC with the the Conexant chip modem,
>> the code package which you should be using is
>> hsfmodem-7.80.02.06x86_64full.tar.gz,
>> obtained from the bottom of
>> http://www.linuxant.com/drivers/hsf/full/downloads.php
>>
>> Is this the package on which you are having the compile problems?
>>
>> I am confused about your description of the attempted fixes,
>> because they were done on files like
>>> - /usr/lib/hcfpcimodem/modules/osnvm.c
>> but that is hcfpcimodem code, while cogent changes if any should be on
>> a hsfmodem code
>>
>> MarvS
>>
>>
>> On Sat, Aug 27, 2011 at 4:43 PM, Jeffrey Cohan <cohanjeffrey@xxxxxxx>
>> wrote:
>>> Hi Antonio!
>>>
>>> in response I get
>>> GNU grep 2.6.3
>>> License GPLv3+: GNU GPL version 3 or later
>>>
>>> ...so all is ok?  I'm trying to install dgcmodem_1.13_i386.deb which I
>>> have
>>> unzipped but can't yet get dpkg to work (I get "dpkg: error: need an
>>> action
>>> option") and will let you know how it goes. Again, I'd be happy to
>>> re-install Ubuntu if necessary.
>>>
>>> Jeff
>>>
>>>
>>> -----Original Message-----
>>> From: Antonio Olivares <olivares14031@xxxxxxxxx>
>>> To: Jeffrey Cohan <cohanjeffrey@xxxxxxx>
>>> Cc: discuss@xxxxxxxxxxxxx; marvin.stodolsky@xxxxxxxxx;
>>> support@xxxxxxxxxxxx
>>> Sent: Sat, Aug 27, 2011 1:20 pm
>>> Subject: Re: no dial-up: hsfmodem and alsa-driver-linuxant problem?
>>>
>>> Jeffrey,
>>>
>>> I made a BOO-BOO(mistake), instead of uname -a , dmesg | grep 'gcc'
>>> hen gcc --version like
>>>
>>> [olivares@acer-aspire-1 ~]$ dmesg | grep 'gcc'
>>> [    0.000000] Linux version 2.6.40-4.fc15.i686
>>> (mockbuild@xxxxxxxxxxxxxxxxxxxxxxxxxxxxx) (gcc version 4.6.0 20110530
>>> (Red Hat 4.6.0-9) (GCC) ) #1 SMP Fri Jul 29 18:54:39 UTC 2011
>>> [olivares@acer-aspire-1 ~]$ gcc --version
>>> gcc (GCC) 4.6.0 20110603 (Red Hat 4.6.0-10)
>>> Copyright (C) 2011 Free Software Foundation, Inc.
>>> This is free software; see the source for copying conditions.  There is
>>> NO
>>> warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR
>>> PURPOSE.
>>>
>>> [olivares@acer-aspire-1 ~]$
>>>
>>> Notice that the gcc versions do match :)
>>>
>>> You may pursue to try Marv's suggestion linuxant's usb drivers and see
>>> if they work.
>>>
>>> Regards,
>>>
>>> Antonio
>>>
>>> On Sat, Aug 27, 2011 at 1:47 PM, Jeffrey Cohan <cohanjeffrey@xxxxxxx>
>>> wrote:
>>>> Antonio, here's what I get - do these correspond?
>>>>
>>>> uname -a
>>>> Linux whiskeybisquit-VGN-N130G 2.6.38-11-generic #48-Ubuntu SMP Fri Jul
>>>> 29
>>>> 19:05:14 UTC 2011 i686 i686 i386 GNU/Linux
>>>>
>>>> gcc --version
>>>> gcc (Ubuntu/Linaro 4.5.2-8ubuntu4) 4.5.2
>>>> Copyright (C) 2010 Free Software Foundation, Inc.
>>>>
>>>> I'll gladly reinstall anything! and will look at your other options as
>>>> well.
>>>> Thanks,
>>>>
>>>> Jeffrey
>>>> - - - - - -
>>>>
>>>> Jeffrey,
>>>>
>>>> On Sat, Aug 27, 2011 at 11:42 AM, Jeffrey Cohan <cohanjeffrey@xxxxxxx>
>>>> wrote:
>>>>
>>>>> Good morning Antonio! I found something from you about the USRobotics
>>>>> USR5637 USB modem, and I'm assuming that DIDN'T work out on Ubuntu
>>>>> 11.04?
>>>>> I
>>>>> don't find anything on the web that confirms that any other USB modem
>>>>> does
>>>>> work. Or a replacement internal one for the VAIO?
>>>>>
>>>>> I'm reluctant to install an older Ubuntu version as you suggest Marv as
>>>>> sooner or later it would not be supported, because it would take so
>>>>> much
>>>>> time to go back and forth unless one version can be accessed within
>>>>> another
>>>>> (at home I have only dial-up and use it many times each day) and
>>>>> because
>>>>> of
>>>>> a potential problem with Thunderbird: due to family needs I go between
>>>>> the
>>>>> 2
>>>>> laptops (I can check email via wifi when not at home), must keep my
>>>>> Thunderbird profile on an external drive, and the profile has been
>>>>> severely
>>>>> compromised when accessed through different systems/versions (I'd like
>>>>> to
>>>>> have the latest Ubuntu on both machines, and do need to use both to run
>>>>> ALL
>>>>> of my software). If it were for the occasional fax, this option would
>>>>> be
>>>>> fine.
>>>>>
>>>>
>>>> Maybe you can install an older kernel, for the meantime to give some
>>>> time for a fix.
>>>>
>>>>>
>>>>> So I'll assume that the message:
>>>>> no device detected by hsf driver - HDA modems may require reboot
>>>>> Note: HDA support not compiled in the driver
>>>>>
>>>>> ...leads me too a dead end. On both computers, alas.
>>>>>
>>>>> On this page:
>>>>> https://help.ubuntu.com/community/DialupModemHowto/Conexant
>>>>> shouldn't this link:
>>>>> For Ubuntu 11.04 (Natty Narwhal): You can follow the steps on this
>>>>> thread.
>>>>> :
>>>>> http://ubuntuforums.org/showthread.php?t=1781268
>>>>> be removed? or why would it not work in my case?
>>>>>
>>>>
>>>> Might be due to some kernel problem* , kernel devel package/kernel
>>>> headers, some type of mismatch when I see the errors in the messages
>>>> that you have sent us:
>>>>
>>>> <quote>
>>>>    alsa-driver-linuxant_1.0.23.1_all.deb:
>>>> ----in terminal:
>>>> Building modules for the 2.6.38-11-generic kernel, please wait... done.
>>>> ERROR: Build failed. Please review the build log at
>>>> /tmp/alsa-driver-linuxant.26528.log
>>>> dpkg: error processing alsa-driver-linuxant (--install):
>>>>  subprocess installed post-installation script returned error exit
>>>> status
>>>> 2
>>>> ----in log file:
>>>> checking for GCC version... Kernel compiler:  Used compiler: gcc
>>>> (Ubuntu/Linaro 4.5.2-8ubuntu4) 4.5.2
>>>> *** NO PREDEFINED KERNEL COMPILER IS DETECTED
>>>> *** Assuming the same compiler is used with the current system compiler.
>>>> *** Please make sure that the same compiler version was used for
>>>> building kernel.
>>>> and later...
>>>> /usr/lib/alsa-driver-linuxant/acore/pcm_native.c: In function
>>>> ‘snd_pcm_hw_params’:
>>>> /usr/lib/alsa-driver-linuxant/acore/pcm_native.c:489:2: error:
>>>> implicit declaration of function ‘pm_qos_remove_requirement’
>>>> /usr/lib/alsa-driver-linuxant/acore/pcm_native.c:492:3: error:
>>>> implicit declaration of function ‘pm_qos_add_requirement’
>>>> make[3]: *** [/usr/lib/alsa-driver-linuxant/acore/pcm_native.o] Error 1
>>>> make[2]: *** [/usr/lib/alsa-driver-linuxant/acore] Error 2
>>>> make[1]: *** [_module_/usr/lib/alsa-driver-linuxant] Error 2
>>>> make[1]: Leaving directory `/usr/src/linux-headers-2.6.38-11-generic'
>>>> make: *** [compile] Error 2
>>>> </quote>
>>>>
>>>> This line ``*** NO PREDEFINED KERNEL COMPILER IS DETECTED
>>>> *** Assuming the same compiler is used with the current system compiler.
>>>> *** Please make sure that the same compiler version was used for
>>>> building kernel.
>>>> '' is the one that makes me believe that the running kernel is not the
>>>> same gcc as the one in the system.  In this case and in others it is
>>>> important that the running kernel and the gcc be the same so that no
>>>> errors occurs.  If you can you can confirm
>>>>
>>>> run
>>>> $ uname -a
>>>> and
>>>> $ gcc --version
>>>>
>>>> and that may tell us why things are not working.  To get it working,
>>>> the kernel and the gcc must be the same.
>>>>
>>>> If you want and have access to a livecd like
>>>> Knoppix/Slax/Porteus/Puppy/..., you can use some of these at least to
>>>> get a connection to internet via dialup.  Puppy in many cases has out
>>>> of box support for many winmodems.  In porteus I have successfully
>>>> built some buildscripts to build a module that will make the modems
>>>> work.  Some modems except the hsf/hcf modems since these are
>>>> proprietary, except for the 14 kbps one but that one many people would
>>>> get mad in the case that it is built(they would want full speed, and
>>>> it is a difficult to accomodate to many people*).  One person built
>>>> such a module for slax, but I have no status for it as Slax has not
>>>> been updated for a while.  Without screwing up your running system
>>>> and/or installing again you may try out one livecd(if you can get one)
>>>> and try the driver and see if you can make the modem work and connect
>>>> via dialup or install a kernel that matches gcc and try the fixes
>>>> again.
>>>>
>>>> * unless you have a Dell machine, then you can use the oem drivers and
>>>> you can get full speed on the modem.
>>>>
>>>> If you have a cell phone, you may also use it as a modem to connect to
>>>> internet.  In ModemData.txt, there is a report you can see :
>>>>
>>>> If a cellphone is not detected, see
>>>> http://ubuntuforums.org/archive/index.php/t-878554.html
>>>> A sample report is:
>>>> http://linmodems.technion.ac.il/bigarch/archive-nineth/msg00578.html
>>>>
>>>> Don't get discouraged, a little bit of patience can go a long way.  I
>>>> almost forgot, you can also virtualize a version of linux and with an
>>>> older kernel you can run an older installation along with your current
>>>> one and have a working dialup connection on that one with a working
>>>> driver.  These are things you can take a look at.
>>>>
>>>> When there were no fixes for smartlink modem after kernel 2.6.30/31, I
>>>> used Slax livecd with older kernel to access the internet and then
>>>> later the fixes came along thanks to a person that figured things out.
>>>>  You may try to do something similar and not be left without internet
>>>> for a fix to come in the meantime.  Hang in there!  You can do it.
>>>>
>>>> Regards,
>>>>
>>>>
>>>>
>>>> Antonio
>>>>
>>>>>
>>>>> I've much appreciated your advice - thanks!
>>>>>
>>>>> Jeff
>>>>>
>>>>>
>>>>>
>>>>> -----Original Message-----
>>>>> From: cohanjeffrey@xxxxxxx
>>>>> To: olivares14031@xxxxxxxxx; marvin.stodolsky@xxxxxxxxx;
>>>>> discuss@xxxxxxxxxxxxx; support@xxxxxxxxxxxx
>>>>> Sent: Fri, Aug 26, 2011 7:23 pm
>>>>> Subject: Re: no dial-up: hsfmodem and alsa-driver-linuxant problem?
>>>>>
>>>>> Thank you Antonio and Marv - really appreciate it!
>>>>>
>>>>> After another full day I'll try to take your advice tomorrow Marv, and
>>>>> it
>>>>> seems from Ganton at
>>>>> http://ubuntuforums.org/showthread.php?t=1597605&page=4
>>>>> that the most recent kernel that will work will be Ubuntu 10.10. Or
>>>>> could
>>>>> I
>>>>> buy an external modem on ebay that is said to work on Linux? If you
>>>>> have
>>>>> further ideas after reading what follows (especially, re "Warning: no
>>>>> device
>>>>> detected by hsf driver - HDA modems may require reboot" and "Note: HDA
>>>>> support not compiled in the driver"), I would be most grateful!
>>>>>
>>>>> Today I removed alsa-driver-linuxant and installed
>>>>> hsfmodem-7.80.02.06full,
>>>>> and got code similar to yours Antonio.
>>>>>
>>>>> But an "hsfconfig" resulted in (excerpts):
>>>>> Conexant HSF softmodem driver, version 7.80.02.06full
>>>>> When reporting a problem for the first time, please send
>>>>> us the file generated by "hsfconfig --dumpdiag".
>>>>> No pre-built modules for: Ubuntu-11.04 linux-2.6.38-11-generic i686-SMP
>>>>> ...and the punchline:
>>>>> ERROR: Module build failed!
>>>>> - - -
>>>>> buildlog excerpts:
>>>>> /usr/lib/hsfmodem/modules/osnvm.c:408:8: error: 'MUTEX' undeclared here
>>>>> (not
>>>>> in a function)
>>>>> make[2]: *** [/usr/lib/hsfmodem/modules/osnvm.o] Error 1
>>>>> make[1]: *** [_module_/usr/lib/hsfmodem/modules] Error 2
>>>>>
>>>>> so I again did this:
>>>>> replace DECLARE_MUTEX with DEFINE_SEMAPHORE in:
>>>>> - /usr/lib/hcfpcimodem/modules/osnvm.c
>>>>> - /usr/lib/hcfpcimodem/modules/GPL/serial_cnxt.c
>>>>> replace .ioctl with .compat_ioctl in:
>>>>> - /usr/lib/hcfpcimodem/modules/osdiag.c
>>>>>
>>>>> and "hsfconfig" got...
>>>>> Warning: no device detected by hsf driver - HDA modems may require
>>>>> reboot
>>>>> Note: HDA support not compiled in the driver
>>>>>
>>>>> then I ran everything (whew!) from "Ganton's Avatar" at
>>>>> http://ubuntuforums.org/showthread.php?t=1781268
>>>>> and again got exactly the same message with "hsfconfig"
>>>>> (issue not [SOLVED] as stated)
>>>>>
>>>>> with another hsfconfig, it asked
>>>>> Warning: existing driver modules found under:
>>>>>     /lib/modules/2.6.38-11-generic/
>>>>> Would you like to keep using them? [no]
>>>>> ...and I pressed [enter]
>>>>> but got similar results
>>>>> -  -  - (end of exploits for the day, besides a little blackberry
>>>>> picking)-
>>>>> - - - - -
>>>>>
>>>>> Thanks again for helping,
>>>>>
>>>>> Jeff
>>>>>
>>>>>
>>>>>
>>>>> -----Original Message-----
>>>>> From: Antonio Olivares <olivares14031@xxxxxxxxx>
>>>>> To: cohanjeffrey@xxxxxxx
>>>>> Cc: discuss@xxxxxxxxxxxxx; Linuxant support (Jonathan)
>>>>> <support@xxxxxxxxxxxx>; Marvin Stodolsky <marvin.stodolsky@xxxxxxxxx>
>>>>> Sent: Thu, Aug 25, 2011 6:56 pm
>>>>> Subject: Re: no dial-up: hsfmodem and alsa-driver-linuxant problem?
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> Jeffrey,
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> Something is strange.  I try the package (hsf) and it runs for me, I
>>>>>
>>>>>
>>>>>
>>>>> can't find errors:
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> [olivares@acer-aspire-1 hsfmodem-7.80.02.06full]$ su -c 'make install'
>>>>>
>>>>>
>>>>>
>>>>> Password:
>>>>>
>>>>>
>>>>>
>>>>> make[1]: Entering directory
>>>>>
>>>>>
>>>>>
>>>>> `/home/olivares/Downloads/hsfmodem-7.80.02.06full/nvm'
>>>>>
>>>>>
>>>>>
>>>>> mkdir -m 755 -p cvt
>>>>>
>>>>>
>>>>>
>>>>> sed -e 's!@CNXTLINUXVERSION@!7.80.02.06full!g' -e
>>>>>
>>>>>
>>>>>
>>>>> 's!@CNXTTARGET@!hsf!g' -e 's!@CNXTDRVDSC@!Conexant HSF softmodem!g' <
>>>>>
>>>>>
>>>>>
>>>>> inf/hsfpcibasic2.inf | ./cvtinf.pl cvt/hsfpcibasic2; if [ -n
>>>>>
>>>>>
>>>>>
>>>>> "inf/hsf.cty" ]; then ./cvtinf.pl cvt/hsfpcibasic2 < "inf/hsf.cty";
>>>>>
>>>>>
>>>>>
>>>>> else true; fi
>>>>>
>>>>>
>>>>>
>>>>> (cd cvt/hsfpcibasic2/Region && grep -v -l '*' *NAME | sed -e 's/^0//'
>>>>>
>>>>>
>>>>>
>>>>> -e 's/^0//' -e 's/_NAME$//' | tr '
>>>>> ' ',' | sed -e 's/,$//' -e
>>>>>
>>>>>
>>>>>
>>>>> 's/^/"/' -e 's/$/"/' ; echo "") > cvt/hsfpcibasic2/COUNTRY_CODE_LIST
>>>>>
>>>>>
>>>>>
>>>>> sed -e 's!@CNXTLINUXVERSION@!7.80.02.06full!g' -e
>>>>>
>>>>>
>>>>>
>>>>> 's!@CNXTTARGET@!hsf!g' -e 's!@CNXTDRVDSC@!Conexant HSF softmodem!g' <
>>>>>
>>>>>
>>>>>
>>>>> inf/hsfpcibasic2smart.inf | ./cvtinf.pl cvt/hsfpcibasic2smart; if [ -n
>>>>>
>>>>>
>>>>>
>>>>> "" ]; then ./cvtinf.pl cvt/hsfpcibasic2smart < ""; else true; fi
>>>>>
>>>>>
>>>>>
>>>>> if [ -d cvt/hsfpcibasic2/Profile ]; then ln -sf
>>>>>
>>>>>
>>>>>
>>>>> ../hsfpcibasic2/Profile cvt/hsfpcibasic2smart/.; else true; fi
>>>>>
>>>>>
>>>>>
>>>>> ln -sf ../hsfpcibasic2/Region cvt/hsfpcibasic2smart/.
>>>>>
>>>>>
>>>>>
>>>>> (cd cvt/hsfpcibasic2smart/Region && grep -v -l '*' *NAME | sed -e
>>>>>
>>>>>
>>>>>
>>>>> 's/^0//' -e 's/^0//' -e 's/_NAME$//' | tr '
>>>>> ' ',' | sed -e 's/,$//'
>>>>>
>>>>>
>>>>>
>>>>> -e 's/^/"/' -e 's/$/"/' ; echo "") >
>>>>>
>>>>>
>>>>>
>>>>> cvt/hsfpcibasic2smart/COUNTRY_CODE_LIST
>>>>>
>>>>>
>>>>>
>>>>> sed -e 's!@CNXTLINUXVERSION@!7.80.02.06full!g' -e
>>>>>
>>>>>
>>>>>
>>>>> 's!@CNXTTARGET@!hsf!g' -e 's!@CNXTDRVDSC@!Conexant HSF softmodem!g' <
>>>>>
>>>>>
>>>>>
>>>>> inf/hsfpcibasic2hsfi.inf | ./cvtinf.pl cvt/hsfpcibasic2hsfi; if [ -n
>>>>>
>>>>>
>>>>>
>>>>> "inf/hsf.cty" ]; then ./cvtinf.pl cvt/hsfpcibasic2hsfi <
>>>>>
>>>>>
>>>>>
>>>>> "inf/hsf.cty"; else true; fi
>>>>>
>>>>>
>>>>>
>>>>> rm -rf cvt/hsfpcibasic2hsfi/Region
>>>>>
>>>>>
>>>>>
>>>>> ln -sf ../hsfpcibasic2/Region cvt/hsfpcibasic2hsfi/.
>>>>>
>>>>>
>>>>>
>>>>> (cd cvt/hsfpcibasic2hsfi/Region && grep -v -l '*' *NAME | sed -e
>>>>>
>>>>>
>>>>>
>>>>> 's/^0//' -e 's/^0//' -e 's/_NAME$//' | tr '
>>>>> ' ',' | sed -e 's/,$//'
>>>>>
>>>>>
>>>>>
>>>>> -e 's/^/"/' -e 's/$/"/' ; echo "") >
>>>>>
>>>>>
>>>>>
>>>>> cvt/hsfpcibasic2hsfi/COUNTRY_CODE_LIST
>>>>>
>>>>>
>>>>>
>>>>> sed -e 's!@CNXTLINUXVERSION@!7.80.02.06full!g' -e
>>>>>
>>>>>
>>>>>
>>>>> 's!@CNXTTARGET@!hsf!g' -e 's!@CNXTDRVDSC@!Conexant HSF softmodem!g' <
>>>>>
>>>>>
>>>>>
>>>>> inf/hsfpcibasic2bry.inf | ./cvtinf.pl cvt/hsfpcibasic2bry; if [ -n
>>>>>
>>>>>
>>>>>
>>>>> "inf/hsf.cty" ]; then ./cvtinf.pl cvt/hsfpcibasic2bry < "inf/hsf.cty";
>>>>>
>>>>>
>>>>>
>>>>> else true; fi
>>>>>
>>>>>
>>>>>
>>>>> rm -rf cvt/hsfpcibasic2bry/Region
>>>>>
>>>>>
>>>>>
>>>>> ln -sf ../hsfpcibasic2/Region cvt/hsfpcibasic2bry/.
>>>>>
>>>>>
>>>>>
>>>>> (cd cvt/hsfpcibasic2bry/Region && grep -v -l '*' *NAME | sed -e
>>>>>
>>>>>
>>>>>
>>>>> 's/^0//' -e 's/^0//' -e 's/_NAME$//' | tr '
>>>>> ' ',' | sed -e 's/,$//'
>>>>>
>>>>>
>>>>>
>>>>> -e 's/^/"/' -e 's/$/"/' ; echo "") >
>>>>>
>>>>>
>>>>>
>>>>> cvt/hsfpcibasic2bry/COUNTRY_CODE_LIST
>>>>>
>>>>>
>>>>>
>>>>> sed -e 's!@CNXTLINUXVERSION@!7.80.02.06full!g' -e
>>>>>
>>>>>
>>>>>
>>>>> 's!@CNXTTARGET@!hsf!g' -e 's!@CNXTDRVDSC@!Conexant HSF softmodem!g' <
>>>>>
>>>>>
>>>>>
>>>>> inf/hsfpcibasic3.inf | ./cvtinf.pl cvt/hsfpcibasic3; if [ -n
>>>>>
>>>>>
>>>>>
>>>>> "inf/hsf.cty" ]; then ./cvtinf.pl cvt/hsfpcibasic3 < "inf/hsf.cty";
>>>>>
>>>>>
>>>>>
>>>>> else true; fi
>>>>>
>>>>>
>>>>>
>>>>> rm -rf cvt/hsfpcibasic3/Region
>>>>>
>>>>>
>>>>>
>>>>> ln -sf ../hsfpcibasic2/Region cvt/hsfpcibasic3/.
>>>>>
>>>>>
>>>>>
>>>>> (cd cvt/hsfpcibasic3/Region && grep -v -l '*' *NAME | sed -e 's/^0//'
>>>>>
>>>>>
>>>>>
>>>>> -e 's/^0//' -e 's/_NAME$//' | tr '
>>>>> ' ',' | sed -e 's/,$//' -e
>>>>>
>>>>>
>>>>>
>>>>> 's/^/"/' -e 's/$/"/' ; echo "") > cvt/hsfpcibasic3/COUNTRY_CODE_LIST
>>>>>
>>>>>
>>>>>
>>>>> sed -e 's!@CNXTLINUXVERSION@!7.80.02.06full!g' -e
>>>>>
>>>>>
>>>>>
>>>>> 's!@CNXTTARGET@!hsf!g' -e 's!@CNXTDRVDSC@!Conexant HSF softmodem!g' <
>>>>>
>>>>>
>>>>>
>>>>> inf/hsfmc97ich.inf | ./cvtinf.pl cvt/hsfmc97; if [ -n "" ]; then
>>>>>
>>>>>
>>>>>
>>>>> ./cvtinf.pl cvt/hsfmc97 < ""; else true; fi
>>>>>
>>>>>
>>>>>
>>>>> rm -f mc97/HW_ADAPTER_TYPE
>>>>>
>>>>>
>>>>>
>>>>> ln -sf ../hsfpcibasic2smart/Profile cvt/hsfmc97/.
>>>>>
>>>>>
>>>>>
>>>>> ln -sf ../hsfpcibasic2smart/Region cvt/hsfmc97/.
>>>>>
>>>>>
>>>>>
>>>>> (cd cvt/hsfmc97/Region && grep -v -l '*' *NAME | sed -e 's/^0//' -e
>>>>>
>>>>>
>>>>>
>>>>> 's/^0//' -e 's/_NAME$//' | tr '
>>>>> ' ',' | sed -e 's/,$//' -e 's/^/"/'
>>>>>
>>>>>
>>>>>
>>>>> -e 's/$/"/' ; echo "") > cvt/hsfmc97/COUNTRY_CODE_LIST
>>>>>
>>>>>
>>>>>
>>>>> ln -sf `basename cvt/hsfmc97` cvt/hsfmc97ali
>>>>>
>>>>>
>>>>>
>>>>> ln -sf `basename cvt/hsfmc97` cvt/hsfmc97ati
>>>>>
>>>>>
>>>>>
>>>>> ln -sf `basename cvt/hsfmc97` cvt/hsfmc97ich
>>>>>
>>>>>
>>>>>
>>>>> ln -sf `basename cvt/hsfmc97` cvt/hsfmc97sis
>>>>>
>>>>>
>>>>>
>>>>> ln -sf `basename cvt/hsfmc97` cvt/hsfmc97via
>>>>>
>>>>>
>>>>>
>>>>> sed -e 's!@CNXTLINUXVERSION@!7.80.02.06full!g' -e
>>>>>
>>>>>
>>>>>
>>>>> 's!@CNXTTARGET@!hsf!g' -e 's!@CNXTDRVDSC@!Conexant HSF softmodem!g' <
>>>>>
>>>>>
>>>>>
>>>>> inf/hsfcadmus2.inf | ./cvtinf.pl cvt/hsfcadmus2; if [ -n "" ]; then
>>>>>
>>>>>
>>>>>
>>>>> ./cvtinf.pl cvt/hsfcadmus2 < ""; else true; fi
>>>>>
>>>>>
>>>>>
>>>>> rm -f cadmus2/HW_ADAPTER_TYPE
>>>>>
>>>>>
>>>>>
>>>>> ln -sf ../hsfpcibasic2/Profile cvt/hsfcadmus2/.
>>>>>
>>>>>
>>>>>
>>>>> ln -sf ../hsfpcibasic2/Region cvt/hsfcadmus2/.
>>>>>
>>>>>
>>>>>
>>>>> (cd cvt/hsfcadmus2/Region && grep -v -l '*' *NAME | sed -e 's/^0//'
>>>>>
>>>>>
>>>>>
>>>>> -e 's/^0//' -e 's/_NAME$//' | tr '
>>>>> ' ',' | sed -e 's/,$//' -e
>>>>>
>>>>>
>>>>>
>>>>> 's/^/"/' -e 's/$/"/' ; echo "") > cvt/hsfcadmus2/COUNTRY_CODE_LIST
>>>>>
>>>>>
>>>>>
>>>>> sed -e 's!@CNXTLINUXVERSION@!7.80.02.06full!g' -e
>>>>>
>>>>>
>>>>>
>>>>> 's!@CNXTTARGET@!hsf!g' -e 's!@CNXTDRVDSC@!Conexant HSF softmodem!g' <
>>>>>
>>>>>
>>>>>
>>>>> inf/hsfcadmus2smart.inf | ./cvtinf.pl cvt/hsfcadmus2smart; if [ -n ""
>>>>>
>>>>>
>>>>>
>>>>> ]; then ./cvtinf.pl cvt/hsfcadmus2smart < ""; else true; fi
>>>>>
>>>>>
>>>>>
>>>>> rm -f cadmus2smart/HW_ADAPTER_TYPE
>>>>>
>>>>>
>>>>>
>>>>> ln -sf ../hsfpcibasic2smart/Profile cvt/hsfcadmus2smart/.
>>>>>
>>>>>
>>>>>
>>>>> ln -sf ../hsfpcibasic2smart/Region cvt/hsfcadmus2smart/.
>>>>>
>>>>>
>>>>>
>>>>> (cd cvt/hsfcadmus2smart/Region && grep -v -l '*' *NAME | sed -e
>>>>>
>>>>>
>>>>>
>>>>> 's/^0//' -e 's/^0//' -e 's/_NAME$//' | tr '
>>>>> ' ',' | sed -e 's/,$//'
>>>>>
>>>>>
>>>>>
>>>>> -e 's/^/"/' -e 's/$/"/' ; echo "") >
>>>>>
>>>>>
>>>>>
>>>>> cvt/hsfcadmus2smart/COUNTRY_CODE_LIST
>>>>>
>>>>>
>>>>>
>>>>> sed -e 's!@CNXTLINUXVERSION@!7.80.02.06full!g' -e
>>>>>
>>>>>
>>>>>
>>>>> 's!@CNXTTARGET@!hsf!g' -e 's!@CNXTDRVDSC@!Conexant HSF softmodem!g' <
>>>>>
>>>>>
>>>>>
>>>>> inf/hsfhda.inf | ./cvtinf.pl cvt/hsfhda; if [ -n "" ]; then
>>>>>
>>>>>
>>>>>
>>>>> ./cvtinf.pl cvt/hsfhda < ""; else true; fi
>>>>>
>>>>>
>>>>>
>>>>> rm -f hda/HW_ADAPTER_TYPE
>>>>>
>>>>>
>>>>>
>>>>> ln -sf ../hsfpcibasic2smart/Profile cvt/hsfhda/.
>>>>>
>>>>>
>>>>>
>>>>> ln -sf ../hsfpcibasic2smart/Region cvt/hsfhda/.
>>>>>
>>>>>
>>>>>
>>>>> (cd cvt/hsfhda/Region && grep -v -l '*' *NAME | sed -e 's/^0//' -e
>>>>>
>>>>>
>>>>>
>>>>> 's/^0//' -e 's/_NAME$//' | tr '
>>>>> ' ',' | sed -e 's/,$//' -e 's/^/"/'
>>>>>
>>>>>
>>>>>
>>>>> -e 's/$/"/' ; echo "") > cvt/hsfhda/COUNTRY_CODE_LIST
>>>>>
>>>>>
>>>>>
>>>>> cd cvt && find . -type f ! -empty -exec md5sum {} ';' | sort |
>>>>>
>>>>>
>>>>>
>>>>> while read sum file ; do
>>>>>
>>>>>
>>>>>
>>>>>     if [ "$sum" = "$prevsum" ] && cmp -s "$file" "$prevfile"; then
>>>>>
>>>>>
>>>>>
>>>>>         rm -f "$file";
>>>>>
>>>>>
>>>>>
>>>>>         if ! ln "$prevfile" "$file"; then
>>>>>
>>>>>
>>>>>
>>>>>             echo 2>&1 "$0: ln FAILED - recreate $file based on
>>>>> $prevfile";
>>>>>
>>>>>
>>>>>
>>>>>             exit 1;
>>>>>
>>>>>
>>>>>
>>>>>         fi;
>>>>>
>>>>>
>>>>>
>>>>>     else
>>>>>
>>>>>
>>>>>
>>>>>         prevsum="$sum";
>>>>>
>>>>>
>>>>>
>>>>>         prevfile="$file";
>>>>>
>>>>>
>>>>>
>>>>>     fi;
>>>>>
>>>>>
>>>>>
>>>>> done
>>>>>
>>>>>
>>>>>
>>>>> touch cvt/.linksame
>>>>>
>>>>>
>>>>>
>>>>> mkdir -m 755 -p /etc/hsfmodem/nvm
>>>>>
>>>>>
>>>>>
>>>>> cd cvt && (find  hsfpcibasic2  hsfpcibasic2smart  hsfpcibasic2hsfi
>>>>>
>>>>>
>>>>>
>>>>> hsfpcibasic2bry  hsfpcibasic3  hsfmc97  hsfmc97ali  hsfmc97ati
>>>>>
>>>>>
>>>>>
>>>>> hsfmc97ich  hsfmc97sis  hsfmc97via  hsfcadmus2  hsfcadmus2smart
>>>>>
>>>>>
>>>>>
>>>>> hsfhda | cpio -pdmu /etc/hsfmodem/nvm)
>>>>>
>>>>>
>>>>>
>>>>> 127 blocks
>>>>>
>>>>>
>>>>>
>>>>> make[1]: Leaving directory
>>>>>
>>>>>
>>>>>
>>>>> `/home/olivares/Downloads/hsfmodem-7.80.02.06full/nvm'
>>>>>
>>>>>
>>>>>
>>>>> make[1]: Entering directory
>>>>>
>>>>>
>>>>>
>>>>> `/home/olivares/Downloads/hsfmodem-7.80.02.06full/scripts'
>>>>>
>>>>>
>>>>>
>>>>> sed
>>>>>
>>>>>
>>>>>
>>>>>     -e "s!@DATE@!`date "+%a, %d %b %Y %T %z"`!g"
>>>>>
>>>>>
>>>>>
>>>>>     -e 's!@CNXTDRIVER@!hsf!g'
>>>>>
>>>>>
>>>>>
>>>>>     -e 's!@CNXTDRVDSC@!Conexant HSF softmodem!g'
>>>>>
>>>>>
>>>>>
>>>>>     -e 's!@CNXTTARGET@!hsf!g'
>>>>>
>>>>>
>>>>>
>>>>>     -e 's!@CNXTARCH@!i386!g'
>>>>>
>>>>>
>>>>>
>>>>>     -e 's!@CNXTSERDEV@!HSF!g'
>>>>>
>>>>>
>>>>>
>>>>>     -e 's!@CNXTMAXMDM@!8!g'
>>>>>
>>>>>
>>>>>
>>>>>     -e 's!@CNXTETCDIR@!/etc/hsfmodem!g'
>>>>>
>>>>>
>>>>>
>>>>>     -e 's!@CNXTLIBDIR@!/usr/lib/hsfmodem!g'
>>>>>
>>>>>
>>>>>
>>>>>     -e 's!@CNXTSERIALMAJOR@!240!g'
>>>>>
>>>>>
>>>>>
>>>>>     -e 's!@CNXTCALOUTMAJOR@!241!g'
>>>>>
>>>>>
>>>>>
>>>>>     -e 's!@CNXTSERIALMINOR@!64!g'
>>>>>
>>>>>
>>>>>
>>>>>     -e 's!@CNXTDCPMAJOR@!242!g'
>>>>>
>>>>>
>>>>>
>>>>>     -e 's!@CNXTDIAGMAJOR@!243!g'
>>>>>
>>>>>
>>>>>
>>>>>     -e 's!@CNXTDIAGDMPMINOR@!255!g'
>>>>>
>>>>>
>>>>>
>>>>>     -e 's!@CNXTSCRMAJOR@!244!g'
>>>>>
>>>>>
>>>>>
>>>>>     -e 's!@CNXTSBINDIR@!/usr/sbin!g'
>>>>>
>>>>>
>>>>>
>>>>>     -e 's!@CNXTNVMDIR@!/etc/hsfmodem/nvm!g'
>>>>>
>>>>>
>>>>>
>>>>>     -e 's!@CNXTLINUXVERSION@!7.80.02.06full!g'
>>>>>
>>>>>
>>>>>
>>>>>     -e 's!@CNXTLINUX_REL@!1!g'
>>>>>
>>>>>
>>>>>
>>>>>     -e 's!@CNXTLINUXRPM_REL@!1!g'
>>>>>
>>>>>
>>>>>
>>>>>     -e 's!@CNXTLINUXDEB_REL@!1!g'
>>>>>
>>>>>
>>>>>
>>>>>     -e 's!@CNXTMODS@!hsfpcibasic2 hsfpcibasic3 hsfmc97ich hsfmc97via
>>>>>
>>>>>
>>>>>
>>>>> hsfmc97ali hsfmc97ati hsfmc97sis hsfusbcd2 snd_hda_codec_hsfmodem
>>>>>
>>>>>
>>>>>
>>>>> hsfhda hsfsoar hsfserial hsfengine hsfosspec!g'
>>>>>
>>>>>
>>>>>
>>>>>     -e
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> 's!@PATCHERURL@!http://www.linuxant.com/drivers/hsf/full/archive/patches!g'
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>     -e
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> 's!@PATCHERURLUSER@!http://www.linuxant.com/drivers/hsf/downloads-patches.php!g'
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>     -e "s!@BLAM_SUPPORT@!`test ! "" = yes; echo $?`!g"
>>>>>
>>>>>
>>>>>
>>>>>     -e "s!@SCR_SUPPORT@!`test ! "" = yes; echo $?`!g"
>>>>>
>>>>>
>>>>>
>>>>>     -e "s!@DMP_SUPPORT@!`test -z ""; echo $?`!g"
>>>>>
>>>>>
>>>>>
>>>>>     < patcher.in > patcher
>>>>>
>>>>>
>>>>>
>>>>> chmod --reference=patcher.in patcher
>>>>>
>>>>>
>>>>>
>>>>> ln -s cnxtconfig.in hsfconfig.in
>>>>>
>>>>>
>>>>>
>>>>> sed
>>>>>
>>>>>
>>>>>
>>>>>     -e "s!@DATE@!`date "+%a, %d %b %Y %T %z"`!g"
>>>>>
>>>>>
>>>>>
>>>>>     -e 's!@CNXTDRIVER@!hsf!g'
>>>>>
>>>>>
>>>>>
>>>>>     -e 's!@CNXTDRVDSC@!Conexant HSF softmodem!g'
>>>>>
>>>>>
>>>>>
>>>>>     -e 's!@CNXTTARGET@!hsf!g'
>>>>>
>>>>>
>>>>>
>>>>>     -e 's!@CNXTARCH@!i386!g'
>>>>>
>>>>>
>>>>>
>>>>>     -e 's!@CNXTSERDEV@!HSF!g'
>>>>>
>>>>>
>>>>>
>>>>>     -e 's!@CNXTMAXMDM@!8!g'
>>>>>
>>>>>
>>>>>
>>>>>     -e 's!@CNXTETCDIR@!/etc/hsfmodem!g'
>>>>>
>>>>>
>>>>>
>>>>>     -e 's!@CNXTLIBDIR@!/usr/lib/hsfmodem!g'
>>>>>
>>>>>
>>>>>
>>>>>     -e 's!@CNXTSERIALMAJOR@!240!g'
>>>>>
>>>>>
>>>>>
>>>>>     -e 's!@CNXTCALOUTMAJOR@!241!g'
>>>>>
>>>>>
>>>>>
>>>>>     -e 's!@CNXTSERIALMINOR@!64!g'
>>>>>
>>>>>
>>>>>
>>>>>     -e 's!@CNXTDCPMAJOR@!242!g'
>>>>>
>>>>>
>>>>>
>>>>>     -e 's!@CNXTDIAGMAJOR@!243!g'
>>>>>
>>>>>
>>>>>
>>>>>     -e 's!@CNXTDIAGDMPMINOR@!255!g'
>>>>>
>>>>>
>>>>>
>>>>>     -e 's!@CNXTSCRMAJOR@!244!g'
>>>>>
>>>>>
>>>>>
>>>>>     -e 's!@CNXTSBINDIR@!/usr/sbin!g'
>>>>>
>>>>>
>>>>>
>>>>>     -e 's!@CNXTNVMDIR@!/etc/hsfmodem/nvm!g'
>>>>>
>>>>>
>>>>>
>>>>>     -e 's!@CNXTLINUXVERSION@!7.80.02.06full!g'
>>>>>
>>>>>
>>>>>
>>>>>     -e 's!@CNXTLINUX_REL@!1!g'
>>>>>
>>>>>
>>>>>
>>>>>     -e 's!@CNXTLINUXRPM_REL@!1!g'
>>>>>
>>>>>
>>>>>
>>>>>     -e 's!@CNXTLINUXDEB_REL@!1!g'
>>>>>
>>>>>
>>>>>
>>>>>     -e 's!@CNXTMODS@!hsfpcibasic2 hsfpcibasic3 hsfmc97ich hsfmc97via
>>>>>
>>>>>
>>>>>
>>>>> hsfmc97ali hsfmc97ati hsfmc97sis hsfusbcd2 snd_hda_codec_hsfmodem
>>>>>
>>>>>
>>>>>
>>>>> hsfhda hsfsoar hsfserial hsfengine hsfosspec!g'
>>>>>
>>>>>
>>>>>
>>>>>     -e
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> 's!@PATCHERURL@!http://www.linuxant.com/drivers/hsf/full/archive/patches!g'
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>     -e
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> 's!@PATCHERURLUSER@!http://www.linuxant.com/drivers/hsf/downloads-patches.php!g'
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>     -e "s!@BLAM_SUPPORT@!`test ! "" = yes; echo $?`!g"
>>>>>
>>>>>
>>>>>
>>>>>     -e "s!@SCR_SUPPORT@!`test ! "" = yes; echo $?`!g"
>>>>>
>>>>>
>>>>>
>>>>>     -e "s!@DMP_SUPPORT@!`test -z ""; echo $?`!g"
>>>>>
>>>>>
>>>>>
>>>>>     < hsfconfig.in > hsfconfig
>>>>>
>>>>>
>>>>>
>>>>> chmod --reference=hsfconfig.in hsfconfig
>>>>>
>>>>>
>>>>>
>>>>> ln -s cnxtstop.in hsfstop.in
>>>>>
>>>>>
>>>>>
>>>>> sed
>>>>>
>>>>>
>>>>>
>>>>>     -e "s!@DATE@!`date "+%a, %d %b %Y %T %z"`!g"
>>>>>
>>>>>
>>>>>
>>>>>     -e 's!@CNXTDRIVER@!hsf!g'
>>>>>
>>>>>
>>>>>
>>>>>     -e 's!@CNXTDRVDSC@!Conexant HSF softmodem!g'
>>>>>
>>>>>
>>>>>
>>>>>     -e 's!@CNXTTARGET@!hsf!g'
>>>>>
>>>>>
>>>>>
>>>>>     -e 's!@CNXTARCH@!i386!g'
>>>>>
>>>>>
>>>>>
>>>>>     -e 's!@CNXTSERDEV@!HSF!g'
>>>>>
>>>>>
>>>>>
>>>>>     -e 's!@CNXTMAXMDM@!8!g'
>>>>>
>>>>>
>>>>>
>>>>>     -e 's!@CNXTETCDIR@!/etc/hsfmodem!g'
>>>>>
>>>>>
>>>>>
>>>>>     -e 's!@CNXTLIBDIR@!/usr/lib/hsfmodem!g'
>>>>>
>>>>>
>>>>>
>>>>>     -e 's!@CNXTSERIALMAJOR@!240!g'
>>>>>
>>>>>
>>>>>
>>>>>     -e 's!@CNXTCALOUTMAJOR@!241!g'
>>>>>
>>>>>
>>>>>
>>>>>     -e 's!@CNXTSERIALMINOR@!64!g'
>>>>>
>>>>>
>>>>>
>>>>>     -e 's!@CNXTDCPMAJOR@!242!g'
>>>>>
>>>>>
>>>>>
>>>>>     -e 's!@CNXTDIAGMAJOR@!243!g'
>>>>>
>>>>>
>>>>>
>>>>>     -e 's!@CNXTDIAGDMPMINOR@!255!g'
>>>>>
>>>>>
>>>>>
>>>>>     -e 's!@CNXTSCRMAJOR@!244!g'
>>>>>
>>>>>
>>>>>
>>>>>     -e 's!@CNXTSBINDIR@!/usr/sbin!g'
>>>>>
>>>>>
>>>>>
>>>>>     -e 's!@CNXTNVMDIR@!/etc/hsfmodem/nvm!g'
>>>>>
>>>>>
>>>>>
>>>>>     -e 's!@CNXTLINUXVERSION@!7.80.02.06full!g'
>>>>>
>>>>>
>>>>>
>>>>>     -e 's!@CNXTLINUX_REL@!1!g'
>>>>>
>>>>>
>>>>>
>>>>>     -e 's!@CNXTLINUXRPM_REL@!1!g'
>>>>>
>>>>>
>>>>>
>>>>>     -e 's!@CNXTLINUXDEB_REL@!1!g'
>>>>>
>>>>>
>>>>>
>>>>>     -e 's!@CNXTMODS@!hsfpcibasic2 hsfpcibasic3 hsfmc97ich hsfmc97via
>>>>>
>>>>>
>>>>>
>>>>> hsfmc97ali hsfmc97ati hsfmc97sis hsfusbcd2 snd_hda_codec_hsfmodem
>>>>>
>>>>>
>>>>>
>>>>> hsfhda hsfsoar hsfserial hsfengine hsfosspec!g'
>>>>>
>>>>>
>>>>>
>>>>>     -e
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> 's!@PATCHERURL@!http://www.linuxant.com/drivers/hsf/full/archive/patches!g'
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>     -e
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> 's!@PATCHERURLUSER@!http://www.linuxant.com/drivers/hsf/downloads-patches.php!g'
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>     -e "s!@BLAM_SUPPORT@!`test ! "" = yes; echo $?`!g"
>>>>>
>>>>>
>>>>>
>>>>>     -e "s!@SCR_SUPPORT@!`test ! "" = yes; echo $?`!g"
>>>>>
>>>>>
>>>>>
>>>>>     -e "s!@DMP_SUPPORT@!`test -z ""; echo $?`!g"
>>>>>
>>>>>
>>>>>
>>>>>     < hsfstop.in > hsfstop
>>>>>
>>>>>
>>>>>
>>>>> chmod --reference=hsfstop.in hsfstop
>>>>>
>>>>>
>>>>>
>>>>> ln -s cnxtmodconflicts.in hsfmodconflicts.in
>>>>>
>>>>>
>>>>>
>>>>> sed
>>>>>
>>>>>
>>>>>
>>>>>     -e "s!@DATE@!`date "+%a, %d %b %Y %T %z"`!g"
>>>>>
>>>>>
>>>>>
>>>>>     -e 's!@CNXTDRIVER@!hsf!g'
>>>>>
>>>>>
>>>>>
>>>>>     -e 's!@CNXTDRVDSC@!Conexant HSF softmodem!g'
>>>>>
>>>>>
>>>>>
>>>>>     -e 's!@CNXTTARGET@!hsf!g'
>>>>>
>>>>>
>>>>>
>>>>>     -e 's!@CNXTARCH@!i386!g'
>>>>>
>>>>>
>>>>>
>>>>>     -e 's!@CNXTSERDEV@!HSF!g'
>>>>>
>>>>>
>>>>>
>>>>>     -e 's!@CNXTMAXMDM@!8!g'
>>>>>
>>>>>
>>>>>
>>>>>     -e 's!@CNXTETCDIR@!/etc/hsfmodem!g'
>>>>>
>>>>>
>>>>>
>>>>>     -e 's!@CNXTLIBDIR@!/usr/lib/hsfmodem!g'
>>>>>
>>>>>
>>>>>
>>>>>     -e 's!@CNXTSERIALMAJOR@!240!g'
>>>>>
>>>>>
>>>>>
>>>>>     -e 's!@CNXTCALOUTMAJOR@!241!g'
>>>>>
>>>>>
>>>>>
>>>>>     -e 's!@CNXTSERIALMINOR@!64!g'
>>>>>
>>>>>
>>>>>
>>>>>     -e 's!@CNXTDCPMAJOR@!242!g'
>>>>>
>>>>>
>>>>>
>>>>>     -e 's!@CNXTDIAGMAJOR@!243!g'
>>>>>
>>>>>
>>>>>
>>>>>     -e 's!@CNXTDIAGDMPMINOR@!255!g'
>>>>>
>>>>>
>>>>>
>>>>>     -e 's!@CNXTSCRMAJOR@!244!g'
>>>>>
>>>>>
>>>>>
>>>>>     -e 's!@CNXTSBINDIR@!/usr/sbin!g'
>>>>>
>>>>>
>>>>>
>>>>>     -e 's!@CNXTNVMDIR@!/etc/hsfmodem/nvm!g'
>>>>>
>>>>>
>>>>>
>>>>>     -e 's!@CNXTLINUXVERSION@!7.80.02.06full!g'
>>>>>
>>>>>
>>>>>
>>>>>     -e 's!@CNXTLINUX_REL@!1!g'
>>>>>
>>>>>
>>>>>
>>>>>     -e 's!@CNXTLINUXRPM_REL@!1!g'
>>>>>
>>>>>
>>>>>
>>>>>     -e 's!@CNXTLINUXDEB_REL@!1!g'
>>>>>
>>>>>
>>>>>
>>>>>     -e 's!@CNXTMODS@!hsfpcibasic2 hsfpcibasic3 hsfmc97ich hsfmc97via
>>>>>
>>>>>
>>>>>
>>>>> hsfmc97ali hsfmc97ati hsfmc97sis hsfusbcd2 snd_hda_codec_hsfmodem
>>>>>
>>>>>
>>>>>
>>>>> hsfhda hsfsoar hsfserial hsfengine hsfosspec!g'
>>>>>
>>>>>
>>>>>
>>>>>     -e
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> 's!@PATCHERURL@!http://www.linuxant.com/drivers/hsf/full/archive/patches!g'
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>     -e
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> 's!@PATCHERURLUSER@!http://www.linuxant.com/drivers/hsf/downloads-patches.php!g'
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>     -e "s!@BLAM_SUPPORT@!`test ! "" = yes; echo $?`!g"
>>>>>
>>>>>
>>>>>
>>>>>     -e "s!@SCR_SUPPORT@!`test ! "" = yes; echo $?`!g"
>>>>>
>>>>>
>>>>>
>>>>>     -e "s!@DMP_SUPPORT@!`test -z ""; echo $?`!g"
>>>>>
>>>>>
>>>>>
>>>>>     < hsfmodconflicts.in > hsfmodconflicts
>>>>>
>>>>>
>>>>>
>>>>> chmod --reference=hsfmodconflicts.in hsfmodconflicts
>>>>>
>>>>>
>>>>>
>>>>> ln -s cnxtdcpd.in hsfdcpd.in
>>>>>
>>>>>
>>>>>
>>>>> sed
>>>>>
>>>>>
>>>>>
>>>>>     -e "s!@DATE@!`date "+%a, %d %b %Y %T %z"`!g"
>>>>>
>>>>>
>>>>>
>>>>>     -e 's!@CNXTDRIVER@!hsf!g'
>>>>>
>>>>>
>>>>>
>>>>>     -e 's!@CNXTDRVDSC@!Conexant HSF softmodem!g'
>>>>>
>>>>>
>>>>>
>>>>>     -e 's!@CNXTTARGET@!hsf!g'
>>>>>
>>>>>
>>>>>
>>>>>     -e 's!@CNXTARCH@!i386!g'
>>>>>
>>>>>
>>>>>
>>>>>     -e 's!@CNXTSERDEV@!HSF!g'
>>>>>
>>>>>
>>>>>
>>>>>     -e 's!@CNXTMAXMDM@!8!g'
>>>>>
>>>>>
>>>>>
>>>>>     -e 's!@CNXTETCDIR@!/etc/hsfmodem!g'
>>>>>
>>>>>
>>>>>
>>>>>     -e 's!@CNXTLIBDIR@!/usr/lib/hsfmodem!g'
>>>>>
>>>>>
>>>>>
>>>>>     -e 's!@CNXTSERIALMAJOR@!240!g'
>>>>>
>>>>>
>>>>>
>>>>>     -e 's!@CNXTCALOUTMAJOR@!241!g'
>>>>>
>>>>>
>>>>>
>>>>>     -e 's!@CNXTSERIALMINOR@!64!g'
>>>>>
>>>>>
>>>>>
>>>>>     -e 's!@CNXTDCPMAJOR@!242!g'
>>>>>
>>>>>
>>>>>
>>>>>     -e 's!@CNXTDIAGMAJOR@!243!g'
>>>>>
>>>>>
>>>>>
>>>>>     -e 's!@CNXTDIAGDMPMINOR@!255!g'
>>>>>
>>>>>
>>>>>
>>>>>     -e 's!@CNXTSCRMAJOR@!244!g'
>>>>>
>>>>>
>>>>>
>>>>>     -e 's!@CNXTSBINDIR@!/usr/sbin!g'
>>>>>
>>>>>
>>>>>
>>>>>     -e 's!@CNXTNVMDIR@!/etc/hsfmodem/nvm!g'
>>>>>
>>>>>
>>>>>
>>>>>     -e 's!@CNXTLINUXVERSION@!7.80.02.06full!g'
>>>>>
>>>>>
>>>>>
>>>>>     -e 's!@CNXTLINUX_REL@!1!g'
>>>>>
>>>>>
>>>>>
>>>>>     -e 's!@CNXTLINUXRPM_REL@!1!g'
>>>>>
>>>>>
>>>>>
>>>>>     -e 's!@CNXTLINUXDEB_REL@!1!g'
>>>>>
>>>>>
>>>>>
>>>>>     -e 's!@CNXTMODS@!hsfpcibasic2 hsfpcibasic3 hsfmc97ich hsfmc97via
>>>>>
>>>>>
>>>>>
>>>>> hsfmc97ali hsfmc97ati hsfmc97sis hsfusbcd2 snd_hda_codec_hsfmodem
>>>>>
>>>>>
>>>>>
>>>>> hsfhda hsfsoar hsfserial hsfengine hsfosspec!g'
>>>>>
>>>>>
>>>>>
>>>>>     -e
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> 's!@PATCHERURL@!http://www.linuxant.com/drivers/hsf/full/archive/patches!g'
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>     -e
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> 's!@PATCHERURLUSER@!http://www.linuxant.com/drivers/hsf/downloads-patches.php!g'
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>     -e "s!@BLAM_SUPPORT@!`test ! "" = yes; echo $?`!g"
>>>>>
>>>>>
>>>>>
>>>>>     -e "s!@SCR_SUPPORT@!`test ! "" = yes; echo $?`!g"
>>>>>
>>>>>
>>>>>
>>>>>     -e "s!@DMP_SUPPORT@!`test -z ""; echo $?`!g"
>>>>>
>>>>>
>>>>>
>>>>>     < hsfdcpd.in > hsfdcpd
>>>>>
>>>>>
>>>>>
>>>>> chmod --reference=hsfdcpd.in hsfdcpd
>>>>>
>>>>>
>>>>>
>>>>> install -m 700 hsfconfig hsfstop hsfmodconflicts hsfdcpd /usr/sbin
>>>>>
>>>>>
>>>>>
>>>>> ln -s rccnxt.in rchsf.in
>>>>>
>>>>>
>>>>>
>>>>> sed
>>>>>
>>>>>
>>>>>
>>>>>     -e "s!@DATE@!`date "+%a, %d %b %Y %T %z"`!g"
>>>>>
>>>>>
>>>>>
>>>>>     -e 's!@CNXTDRIVER@!hsf!g'
>>>>>
>>>>>
>>>>>
>>>>>     -e 's!@CNXTDRVDSC@!Conexant HSF softmodem!g'
>>>>>
>>>>>
>>>>>
>>>>>     -e 's!@CNXTTARGET@!hsf!g'
>>>>>
>>>>>
>>>>>
>>>>>     -e 's!@CNXTARCH@!i386!g'
>>>>>
>>>>>
>>>>>
>>>>>     -e 's!@CNXTSERDEV@!HSF!g'
>>>>>
>>>>>
>>>>>
>>>>>     -e 's!@CNXTMAXMDM@!8!g'
>>>>>
>>>>>
>>>>>
>>>>>     -e 's!@CNXTETCDIR@!/etc/hsfmodem!g'
>>>>>
>>>>>
>>>>>
>>>>>     -e 's!@CNXTLIBDIR@!/usr/lib/hsfmodem!g'
>>>>>
>>>>>
>>>>>
>>>>>     -e 's!@CNXTSERIALMAJOR@!240!g'
>>>>>
>>>>>
>>>>>
>>>>>     -e 's!@CNXTCALOUTMAJOR@!241!g'
>>>>>
>>>>>
>>>>>
>>>>>     -e 's!@CNXTSERIALMINOR@!64!g'
>>>>>
>>>>>
>>>>>
>>>>>     -e 's!@CNXTDCPMAJOR@!242!g'
>>>>>
>>>>>
>>>>>
>>>>>     -e 's!@CNXTDIAGMAJOR@!243!g'
>>>>>
>>>>>
>>>>>
>>>>>     -e 's!@CNXTDIAGDMPMINOR@!255!g'
>>>>>
>>>>>
>>>>>
>>>>>     -e 's!@CNXTSCRMAJOR@!244!g'
>>>>>
>>>>>
>>>>>
>>>>>     -e 's!@CNXTSBINDIR@!/usr/sbin!g'
>>>>>
>>>>>
>>>>>
>>>>>     -e 's!@CNXTNVMDIR@!/etc/hsfmodem/nvm!g'
>>>>>
>>>>>
>>>>>
>>>>>     -e 's!@CNXTLINUXVERSION@!7.80.02.06full!g'
>>>>>
>>>>>
>>>>>
>>>>>     -e 's!@CNXTLINUX_REL@!1!g'
>>>>>
>>>>>
>>>>>
>>>>>     -e 's!@CNXTLINUXRPM_REL@!1!g'
>>>>>
>>>>>
>>>>>
>>>>>     -e 's!@CNXTLINUXDEB_REL@!1!g'
>>>>>
>>>>>
>>>>>
>>>>>     -e 's!@CNXTMODS@!hsfpcibasic2 hsfpcibasic3 hsfmc97ich hsfmc97via
>>>>>
>>>>>
>>>>>
>>>>> hsfmc97ali hsfmc97ati hsfmc97sis hsfusbcd2 snd_hda_codec_hsfmodem
>>>>>
>>>>>
>>>>>
>>>>> hsfhda hsfsoar hsfserial hsfengine hsfosspec!g'
>>>>>
>>>>>
>>>>>
>>>>>     -e
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> 's!@PATCHERURL@!http://www.linuxant.com/drivers/hsf/full/archive/patches!g'
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>     -e
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> 's!@PATCHERURLUSER@!http://www.linuxant.com/drivers/hsf/downloads-patches.php!g'
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>     -e "s!@BLAM_SUPPORT@!`test ! "" = yes; echo $?`!g"
>>>>>
>>>>>
>>>>>
>>>>>     -e "s!@SCR_SUPPORT@!`test ! "" = yes; echo $?`!g"
>>>>>
>>>>>
>>>>>
>>>>>     -e "s!@DMP_SUPPORT@!`test -z ""; echo $?`!g"
>>>>>
>>>>>
>>>>>
>>>>>     < rchsf.in > rchsf
>>>>>
>>>>>
>>>>>
>>>>> chmod --reference=rchsf.in rchsf
>>>>>
>>>>>
>>>>>
>>>>> mkdir -m 755 -p /usr/lib/hsfmodem
>>>>>
>>>>>
>>>>>
>>>>> install -m 700 rchsf /usr/lib/hsfmodem
>>>>>
>>>>>
>>>>>
>>>>> make[1]: Leaving directory
>>>>>
>>>>>
>>>>>
>>>>> `/home/olivares/Downloads/hsfmodem-7.80.02.06full/scripts'
>>>>>
>>>>>
>>>>>
>>>>> make[1]: Entering directory
>>>>>
>>>>>
>>>>>
>>>>> `/home/olivares/Downloads/hsfmodem-7.80.02.06full/modules'
>>>>>
>>>>>
>>>>>
>>>>> rm -rf "/usr/lib/hsfmodem/config.mak"
>>>>>
>>>>>
>>>>>
>>>>> "/usr/lib/hsfmodem/modules/imported" "/usr/lib/hsfmodem/modules"
>>>>>
>>>>>
>>>>>
>>>>> mkdir -m 755 -p /usr/lib/hsfmodem/modules
>>>>>
>>>>>
>>>>>
>>>>> (cd .. && find config.mak modules/imported -depth -print | cpio -pdmu
>>>>>
>>>>>
>>>>>
>>>>> /usr/lib/hsfmodem)
>>>>>
>>>>>
>>>>>
>>>>> 5892 blocks
>>>>>
>>>>>
>>>>>
>>>>> find . ( -name COPYING -o -name '*.sh' -o -name '*.[ch]' -o -name
>>>>>
>>>>>
>>>>>
>>>>> '*.mak' -o -name '[Mm]akefile' ) -print | cpio -pdmu
>>>>>
>>>>>
>>>>>
>>>>> /usr/lib/hsfmodem/modules
>>>>>
>>>>>
>>>>>
>>>>> 3712 blocks
>>>>>
>>>>>
>>>>>
>>>>> find binaries -depth -print | cpio -pdmu /usr/lib/hsfmodem/modules
>>>>>
>>>>>
>>>>>
>>>>> 0 blocks
>>>>>
>>>>>
>>>>>
>>>>> make[1]: Leaving directory
>>>>>
>>>>>
>>>>>
>>>>> `/home/olivares/Downloads/hsfmodem-7.80.02.06full/modules'
>>>>>
>>>>>
>>>>>
>>>>> make[1]: Entering directory
>>>>>
>>>>>
>>>>>
>>>>> `/home/olivares/Downloads/hsfmodem-7.80.02.06full/diag'
>>>>>
>>>>>
>>>>>
>>>>> make[1]: Nothing to be done for `install'.
>>>>>
>>>>>
>>>>>
>>>>> make[1]: Leaving directory
>>>>>
>>>>>
>>>>>
>>>>> `/home/olivares/Downloads/hsfmodem-7.80.02.06full/diag'
>>>>>
>>>>>
>>>>>
>>>>> mkdir -p /etc/hsfmodem/log
>>>>>
>>>>>
>>>>>
>>>>> install -m 444 LICENSE /usr/lib/hsfmodem
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> To complete the installation and configuration of your modem,
>>>>>
>>>>>
>>>>>
>>>>> please run "hsfconfig" (or "/usr/sbin/hsfconfig")
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> Might it be with Ubuntu?  I used generic package with
>>>>>
>>>>>
>>>>>
>>>>> [olivares@acer-aspire-1 hsfmodem-7.80.02.06full]$ uname -a
>>>>>
>>>>>
>>>>>
>>>>> Linux acer-aspire-1 2.6.40-4.fc15.i686 #1 SMP Fri Jul 29 18:54:39 UTC
>>>>>
>>>>>
>>>>>
>>>>> 2011 i686 i686 i386 GNU/Linux
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> Maybe Marv can test to find out what could be wrong?
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> Regards,
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> Antonio
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> On Thu, Aug 25, 2011 at 8:02 PM, Antonio Olivares
>>>>>
>>>>>
>>>>>
>>>>> <olivares14031@xxxxxxxxx> wrote:
>>>>>
>>>>>
>>>>>
>>>>
>>>>>> Jeffrey,
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>> In the case you provided, you installed/tried to install the
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>> alsa-linuxant package?
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>> You may not have needed this package.
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>> You do have kernel sources and compiler ready.  However, the
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>> replacements on the hsfmodem would differ with the ones suggested by
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>> Jonathan(Linuxant support), DECLARE_MUTEX, with DEFINE_SEMAPHORE after
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>> you have detected where it bombs out or wait a bit till they(Linuxant)
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>> patch up the code and make it ready to work.
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>> If someone has suggestions, please forward them to Jeffrey.
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>> Regards,
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>> Antonio
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>> On Thu, Aug 25, 2011 at 5:15 PM,  <cohanjeffrey@xxxxxxx> wrote:
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>> Great to hear from you Antonio. I'm working only with the Sony 32-bit
>>>>>>> VAIO
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>> VGN-N130G and will attach ModemData.txt again.
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>>
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>> 1) I did this BUT substituted /hsfmodem/ for /hcfpcimodem/ and wvdial
>>>>>>> does
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>> not find a modem:
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>>
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>> replace DECLARE_MUTEX with DEFINE_SEMAPHORE in:
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>> - /usr/lib/hcfpcimodem/modules/osnvm.c
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>> - /usr/lib/hcfpcimodem/modules/GPL/serial_cnxt.c
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>> replace .ioctl with .compat_ioctl in:
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>> - /usr/lib/hcfpcimodem/modules/osdiag.c
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>>
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>> 2) ERRORS: Both alsa-driver-linuxant and hfsmodem packages install
>>>>>>> with
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>> errors, even when I remove them and re-install. Here are excerpts:
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>>
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>>     alsa-driver-linuxant_1.0.23.1_all.deb:
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>> ----in terminal:
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>> Building modules for the 2.6.38-11-generic kernel, please wait...
>>>>>>> done.
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>> ERROR: Build failed. Please review the build log at
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>> /tmp/alsa-driver-linuxant.26528.log
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>> dpkg: error processing alsa-driver-linuxant (--install):
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>>  subprocess installed post-installation script returned error exit
>>>>>>> status
>>>>>>> 2
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>> ----in log file:
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>> checking for GCC version... Kernel compiler:  Used compiler: gcc
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>> (Ubuntu/Linaro 4.5.2-8ubuntu4) 4.5.2
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>> *** NO PREDEFINED KERNEL COMPILER IS DETECTED
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>> *** Assuming the same compiler is used with the current system
>>>>>>> compiler.
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>> *** Please make sure that the same compiler version was used for
>>>>>>> building
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>> kernel.
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>> and later...
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>> /usr/lib/alsa-driver-linuxant/acore/pcm_native.c: In function
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>> ‘snd_pcm_hw_params’:
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>> /usr/lib/alsa-driver-linuxant/acore/pcm_native.c:489:2: error:
>>>>>>> implicit
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>> declaration of function ‘pm_qos_remove_requirement’
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>> /usr/lib/alsa-driver-linuxant/acore/pcm_native.c:492:3: error:
>>>>>>> implicit
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>> declaration of function ‘pm_qos_add_requirement’
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>> make[3]: *** [/usr/lib/alsa-driver-linuxant/acore/pcm_native.o] Error
>>>>>>> 1
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>> make[2]: *** [/usr/lib/alsa-driver-linuxant/acore] Error 2
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>> make[1]: *** [_module_/usr/lib/alsa-driver-linuxant] Error 2
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>> make[1]: Leaving directory `/usr/src/linux-headers-2.6.38-11-generic'
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>> make: *** [compile] Error 2
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>>
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>>     hsfmodem_7.80.02.06full_i386.deb:
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>> /usr/lib/hsfmodem/modules/osservices.c:1396:1: warning: the frame
>>>>>>> size
>>>>>>> of
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>> 1028 bytes is larger than 1024 bytes
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>>   CC [M]  /usr/lib/hsfmodem/modules/osstdio.o
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>>   CC [M]  /usr/lib/hsfmodem/modules/osnvm.o
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>> /usr/lib/hsfmodem/modules/osnvm.c:408:8: error: 'MUTEX' undeclared
>>>>>>> here
>>>>>>> (not
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>> in a function)
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>> make[2]: *** [/usr/lib/hsfmodem/modules/osnvm.o] Error 1
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>> make[1]: *** [_module_/usr/lib/hsfmodem/modules] Error 2
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>> make[1]: Leaving directory `/usr/src/linux-headers-2.6.38-11-generic'
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>> make: *** [all] Error 2
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>> ----I have the long hsfdiag.txt file from "hsfconfig --dumpdiag" and
>>>>>>> the
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>> buildlog files
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>>
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>> 3) $ uname -a (Jonathan had asked someone for this) gets:
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>> Linux whiskeybisquit-VGN-N130G 2.6.38-11-generic #48-Ubuntu SMP Fri
>>>>>>> Jul
>>>>>>> 29
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>> 19:05:14 UTC 2011 i68
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>>
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>> 4) I had the modem working perfectly in Ubuntu 9.04, but don't
>>>>>>> remember
>>>>>>> how
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>> I did it. Is it possible that it CAN'T be done in 11.04?!
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>>
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>> I'm not sure if any of this will be of use to you, but am
>>>>>>> particularly
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>> interested in 4); and is it correct to substitute hsfmodem in 1)? Is
>>>>>>> 2)
>>>>>>> an
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>> issue? Also would it have been important to reboot at certain points?
>>>>>>> Should
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>> I install a new modem in either beast? I so depend on dial-up! Many
>>>>>>> thanks!
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>>
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>> Jeffrey
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>>
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>> -----Original Message-----
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>> From: Antonio Olivares <olivares14031@xxxxxxxxx>
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>> To: Jeffrey Cohan <cohanjeffrey@xxxxxxx>
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>> Cc: discuss@xxxxxxxxxxxxx
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>> Sent: Wed, Aug 24, 2011 7:17 pm
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>> Subject: Re: no dial-up: hsfmodem and alsa-driver-linuxant problem?
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>>
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>>
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>>
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>>
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>> Jeffrey,
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>>
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>>
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>>
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>> In the x86_64 bit machine, if you had 32 bit linux installed, it
>>>>>>> would
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>>
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>> be a nice opportunity for you to check the modified driver *to see if
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>>
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>> it would work*, but since it is 64 bit you get the message directly
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>>
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>> from ModemData.txt
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>>
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>>
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>>
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>> There is no agrsm software support for x86_64 systems, through the
>>>>>>> modem
>>>>>>> may
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>> be
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>>
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>>  supported on Intel/i386 installations, which do more slowly servce
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>>
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>> x86_64 processors.
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>>
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>>
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>>
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>> * driver
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>>
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> http://linmodems.technion.ac.il/packages/ltmodem/11c11040/agrsm-11c11040_20110811_i386.deb
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>>
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>> + new agrsm tools
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>>
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>>
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>>
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>> For the other modem, Jonathan at Linuxant has posted ways to
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>>
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>> circumvent the errors:
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>>
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>>
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>>
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> http://linmodems.org/cgi-bin/ezmlm-cgi?1:sss:37710:201108:dpmgnpddbcjlkfmlpmin#b
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>>
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>> <quote>
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>>
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>> Hi,
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>>
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>>
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>>
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>> this is a known build issue with recent kernels, even with the latest
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>>
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>> release of the driver. A used provided the following workaround to
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>>
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>> solve it:
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>>
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>>
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>>
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>> ---
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>>
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>> replace DECLARE_MUTEX with DEFINE_SEMAPHORE in:
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>>
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>> - /usr/lib/hcfpcimodem/modules/osnvm.c
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>>
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>> - /usr/lib/hcfpcimodem/modules/GPL/serial_cnxt.c
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>>
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>>
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>>
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>> replace .ioctl with .compat_ioctl in:
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>>
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>> - /usr/lib/hcfpcimodem/modules/osdiag.c
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>>
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>> ---
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>>
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>>
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>>
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>> This build problem will be fixed in a future release of the driver.
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>>
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>>
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>>
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>> Regards,
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>>
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>>
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>>
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>>
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>>
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>> Jonathan
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>>
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>> Technical specialist / Linuxant
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>>
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>> www.linuxant.com
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>>
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>> support@xxxxxxxxxxxx
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>>
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>> </quote>
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>>
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>>
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>>
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>> So you may try the fixes suggested by Jonathan in the meantime.  Or
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>>
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>> you have the option to try the driver 11c11040 but on 32 bit linux.
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>>
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>> Hopefully you can get one of these modems to work.
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>>
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>>
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>>
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>> Regards,
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>>
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>>
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>>
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>> Antonio
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>>
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>>
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>>
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>> On Wed, Aug 24, 2011 at 8:56 PM, Jeffrey Cohan <cohanjeffrey@xxxxxxx>
>>>>>>> wrote:
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>>
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>>> I have spent many many hours trying to get dial-up working on two
>>>>>>>> laptops
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>>
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>>> and would so appreciate your help. Dial-up on either one would be
>>>>>>>> just
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>>> fine.
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>>
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>>>
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>>
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>>> I'm assuming it will be impossible on the HP laptop (64-bit) as I
>>>>>>>> found
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>>
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>>> this:
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>>
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>>> "Current support for the 11c11040 modem does NOT exist on a non-x86
>>>>>>>> system
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>>
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>>> (e.g. AMD, or x86_64.) This is because there is a proprietary core
>>>>>>>> in
>>>>>>>> the
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>>
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>>> code compiled for x86 systems."
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>>
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>>>
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>>
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>>> On the VAIO (32-bit) it worked perfectly in an earlier version of
>>>>>>>> Ubuntu
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>>
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>>> before upgrading.
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>>
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>>>
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>>
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>>> I can't seem to find an appropriate driver at www.linuxant.com for
>>>>>>>> my
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>>> Linux
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>>
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>>> version 2.6.38-11-generic.
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>>
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>>>
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>>
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>>> Alsa-driver-linuxant doesn't seem to be properly installed.
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>>
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>>>
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>>
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>>> I get this error message:
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>>
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>>> ERROR: Module build failed!
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>>
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>>> Please examine the log file
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>>> "/etc/hsfmodem/log/buildlog-20110824182445.txt"
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>>
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>>> to determine why.
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>>
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>>> dpkg: error processing alsa-driver-linuxant (--configure):
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>>
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>>>  subprocess installed post-installation script returned error exit
>>>>>>>> status
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>>> 2
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>>
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>>> Errors were encountered while processing:
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>>
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>>>  alsa-driver-linuxant
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>>
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>>> E: Sub-process /usr/bin/dpkg returned an error code (1)
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>>
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>>> ===============
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>>
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>>>
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>>
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>>> Thanks much!
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>>
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>>>
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>>
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>>> Jeff
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>>
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>>>
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>>
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>>>
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>>
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>>>
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>>
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>>
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>>
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>>
>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>>>
>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>
>>
>



[Index of Archives]     [Linux Media Development]     [Asterisk]     [DCCP]     [Netdev]     [X.org]     [Xfree86]     [Fedora Women]     [Linux USB]

  Powered by Linux