Re: no dial-up: hsfmodem and alsa-driver-linuxant problem?

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



let's skip the USB modem possibiity, at least until the hsfmodem
issues are clarified.

Marv

On Sat, Aug 27, 2011 at 4:57 PM, Jeffrey Cohan <cohanjeffrey@xxxxxxx> wrote:
> Antonio and Marv,
>
> OK maybe I have something - I do not get an error message with dgcconfig
> after installing dgcmodem_1.13_i386.deb. Should I acquire a USB modem, and
> which one? the Rockwell one?
>
> I do get this:
> The /dev/modem alias (symlink) points to ttySHSF0
>
> Jeffrey
>
>
> -----Original Message-----
> From: Jeffrey Cohan <cohanjeffrey@xxxxxxx>
> To: olivares14031@xxxxxxxxx
> Cc: discuss@xxxxxxxxxxxxx; marvin.stodolsky@xxxxxxxxx; support@xxxxxxxxxxxx
> Sent: Sat, Aug 27, 2011 1:43 pm
> Subject: Re: no dial-up: hsfmodem and alsa-driver-linuxant problem?
>
> Hi Antonio!
>
> in response I get
> GNU grep 2.6.3
> License GPLv3+: GNU GPL version 3 or later
>
> ...so all is ok?  I'm trying to install dgcmodem_1.13_i386.deb which I have
> unzipped but can't yet get dpkg to work (I get "dpkg: error: need an action
> option") and will let you know how it goes. Again, I'd be happy to
> re-install Ubuntu if necessary.
>
> Jeff
>
>
> -----Original Message-----
> From: Antonio Olivares <olivares14031@xxxxxxxxx>
> To: Jeffrey Cohan <cohanjeffrey@xxxxxxx>
> Cc: discuss@xxxxxxxxxxxxx; marvin.stodolsky@xxxxxxxxx; support@xxxxxxxxxxxx
> Sent: Sat, Aug 27, 2011 1:20 pm
> Subject: Re: no dial-up: hsfmodem and alsa-driver-linuxant problem?
>
> Jeffrey,
>
> I made a BOO-BOO(mistake), instead of uname -a , dmesg | grep 'gcc'
> hen gcc --version like
>
> [olivares@acer-aspire-1 ~]$ dmesg | grep 'gcc'
> [    0.000000] Linux version 2.6.40-4.fc15.i686
> (mockbuild@xxxxxxxxxxxxxxxxxxxxxxxxxxxxx) (gcc version 4.6.0 20110530
> (Red Hat 4.6.0-9) (GCC) ) #1 SMP Fri Jul 29 18:54:39 UTC 2011
> [olivares@acer-aspire-1 ~]$ gcc --version
> gcc (GCC) 4.6.0 20110603 (Red Hat 4.6.0-10)
> Copyright (C) 2011 Free Software Foundation, Inc.
> This is free software; see the source for copying conditions.  There is NO
> warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
>
> [olivares@acer-aspire-1 ~]$
>
> Notice that the gcc versions do match :)
>
> You may pursue to try Marv's suggestion linuxant's usb drivers and see
> if they work.
>
> Regards,
>
> Antonio
>
> On Sat, Aug 27, 2011 at 1:47 PM, Jeffrey Cohan <cohanjeffrey@xxxxxxx> wrote:
>> Antonio, here's what I get - do these correspond?
>>
>> uname -a
>> Linux whiskeybisquit-VGN-N130G 2.6.38-11-generic #48-Ubuntu SMP Fri Jul 29
>> 19:05:14 UTC 2011 i686 i686 i386 GNU/Linux
>>
>> gcc --version
>> gcc (Ubuntu/Linaro 4.5.2-8ubuntu4) 4.5.2
>> Copyright (C) 2010 Free Software Foundation, Inc.
>>
>> I'll gladly reinstall anything! and will look at your other options as
>> well.
>> Thanks,
>>
>> Jeffrey
>> - - - - - -
>>
>> Jeffrey,
>>
>> On Sat, Aug 27, 2011 at 11:42 AM, Jeffrey Cohan <cohanjeffrey@xxxxxxx>
>> wrote:
>>
>>> Good morning Antonio! I found something from you about the USRobotics
>>> USR5637 USB modem, and I'm assuming that DIDN'T work out on Ubuntu 11.04?
>>> I
>>> don't find anything on the web that confirms that any other USB modem
>>> does
>>> work. Or a replacement internal one for the VAIO?
>>>
>>> I'm reluctant to install an older Ubuntu version as you suggest Marv as
>>> sooner or later it would not be supported, because it would take so much
>>> time to go back and forth unless one version can be accessed within
>>> another
>>> (at home I have only dial-up and use it many times each day) and because
>>> of
>>> a potential problem with Thunderbird: due to family needs I go between
>>> the
>>> 2
>>> laptops (I can check email via wifi when not at home), must keep my
>>> Thunderbird profile on an external drive, and the profile has been
>>> severely
>>> compromised when accessed through different systems/versions (I'd like to
>>> have the latest Ubuntu on both machines, and do need to use both to run
>>> ALL
>>> of my software). If it were for the occasional fax, this option would be
>>> fine.
>>>
>>
>> Maybe you can install an older kernel, for the meantime to give some
>> time for a fix.
>>
>>>
>>> So I'll assume that the message:
>>> no device detected by hsf driver - HDA modems may require reboot
>>> Note: HDA support not compiled in the driver
>>>
>>> ...leads me too a dead end. On both computers, alas.
>>>
>>> On this page:
>>> https://help.ubuntu.com/community/DialupModemHowto/Conexant
>>> shouldn't this link:
>>> For Ubuntu 11.04 (Natty Narwhal): You can follow the steps on this
>>> thread.
>>> :
>>> http://ubuntuforums.org/showthread.php?t=1781268
>>> be removed? or why would it not work in my case?
>>>
>>
>> Might be due to some kernel problem* , kernel devel package/kernel
>> headers, some type of mismatch when I see the errors in the messages
>> that you have sent us:
>>
>> <quote>
>>    alsa-driver-linuxant_1.0.23.1_all.deb:
>> ----in terminal:
>> Building modules for the 2.6.38-11-generic kernel, please wait... done.
>> ERROR: Build failed. Please review the build log at
>> /tmp/alsa-driver-linuxant.26528.log
>> dpkg: error processing alsa-driver-linuxant (--install):
>>  subprocess installed post-installation script returned error exit status
>> 2
>> ----in log file:
>> checking for GCC version... Kernel compiler:  Used compiler: gcc
>> (Ubuntu/Linaro 4.5.2-8ubuntu4) 4.5.2
>> *** NO PREDEFINED KERNEL COMPILER IS DETECTED
>> *** Assuming the same compiler is used with the current system compiler.
>> *** Please make sure that the same compiler version was used for
>> building kernel.
>> and later...
>> /usr/lib/alsa-driver-linuxant/acore/pcm_native.c: In function
>> ‘snd_pcm_hw_params’:
>> /usr/lib/alsa-driver-linuxant/acore/pcm_native.c:489:2: error:
>> implicit declaration of function ‘pm_qos_remove_requirement’
>> /usr/lib/alsa-driver-linuxant/acore/pcm_native.c:492:3: error:
>> implicit declaration of function ‘pm_qos_add_requirement’
>> make[3]: *** [/usr/lib/alsa-driver-linuxant/acore/pcm_native.o] Error 1
>> make[2]: *** [/usr/lib/alsa-driver-linuxant/acore] Error 2
>> make[1]: *** [_module_/usr/lib/alsa-driver-linuxant] Error 2
>> make[1]: Leaving directory `/usr/src/linux-headers-2.6.38-11-generic'
>> make: *** [compile] Error 2
>> </quote>
>>
>> This line ``*** NO PREDEFINED KERNEL COMPILER IS DETECTED
>> *** Assuming the same compiler is used with the current system compiler.
>> *** Please make sure that the same compiler version was used for
>> building kernel.
>> '' is the one that makes me believe that the running kernel is not the
>> same gcc as the one in the system.  In this case and in others it is
>> important that the running kernel and the gcc be the same so that no
>> errors occurs.  If you can you can confirm
>>
>> run
>> $ uname -a
>> and
>> $ gcc --version
>>
>> and that may tell us why things are not working.  To get it working,
>> the kernel and the gcc must be the same.
>>
>> If you want and have access to a livecd like
>> Knoppix/Slax/Porteus/Puppy/..., you can use some of these at least to
>> get a connection to internet via dialup.  Puppy in many cases has out
>> of box support for many winmodems.  In porteus I have successfully
>> built some buildscripts to build a module that will make the modems
>> work.  Some modems except the hsf/hcf modems since these are
>> proprietary, except for the 14 kbps one but that one many people would
>> get mad in the case that it is built(they would want full speed, and
>> it is a difficult to accomodate to many people*).  One person built
>> such a module for slax, but I have no status for it as Slax has not
>> been updated for a while.  Without screwing up your running system
>> and/or installing again you may try out one livecd(if you can get one)
>> and try the driver and see if you can make the modem work and connect
>> via dialup or install a kernel that matches gcc and try the fixes
>> again.
>>
>> * unless you have a Dell machine, then you can use the oem drivers and
>> you can get full speed on the modem.
>>
>> If you have a cell phone, you may also use it as a modem to connect to
>> internet.  In ModemData.txt, there is a report you can see :
>>
>> If a cellphone is not detected, see
>> http://ubuntuforums.org/archive/index.php/t-878554.html
>> A sample report is:
>> http://linmodems.technion.ac.il/bigarch/archive-nineth/msg00578.html
>>
>> Don't get discouraged, a little bit of patience can go a long way.  I
>> almost forgot, you can also virtualize a version of linux and with an
>> older kernel you can run an older installation along with your current
>> one and have a working dialup connection on that one with a working
>> driver.  These are things you can take a look at.
>>
>> When there were no fixes for smartlink modem after kernel 2.6.30/31, I
>> used Slax livecd with older kernel to access the internet and then
>> later the fixes came along thanks to a person that figured things out.
>>  You may try to do something similar and not be left without internet
>> for a fix to come in the meantime.  Hang in there!  You can do it.
>>
>> Regards,
>>
>>
>>
>> Antonio
>>
>>>
>>> I've much appreciated your advice - thanks!
>>>
>>> Jeff
>>>
>>>
>>>
>>> -----Original Message-----
>>> From: cohanjeffrey@xxxxxxx
>>> To: olivares14031@xxxxxxxxx; marvin.stodolsky@xxxxxxxxx;
>>> discuss@xxxxxxxxxxxxx; support@xxxxxxxxxxxx
>>> Sent: Fri, Aug 26, 2011 7:23 pm
>>> Subject: Re: no dial-up: hsfmodem and alsa-driver-linuxant problem?
>>>
>>> Thank you Antonio and Marv - really appreciate it!
>>>
>>> After another full day I'll try to take your advice tomorrow Marv, and it
>>> seems from Ganton at
>>> http://ubuntuforums.org/showthread.php?t=1597605&page=4
>>> that the most recent kernel that will work will be Ubuntu 10.10. Or could
>>> I
>>> buy an external modem on ebay that is said to work on Linux? If you have
>>> further ideas after reading what follows (especially, re "Warning: no
>>> device
>>> detected by hsf driver - HDA modems may require reboot" and "Note: HDA
>>> support not compiled in the driver"), I would be most grateful!
>>>
>>> Today I removed alsa-driver-linuxant and installed
>>> hsfmodem-7.80.02.06full,
>>> and got code similar to yours Antonio.
>>>
>>> But an "hsfconfig" resulted in (excerpts):
>>> Conexant HSF softmodem driver, version 7.80.02.06full
>>> When reporting a problem for the first time, please send
>>> us the file generated by "hsfconfig --dumpdiag".
>>> No pre-built modules for: Ubuntu-11.04 linux-2.6.38-11-generic i686-SMP
>>> ...and the punchline:
>>> ERROR: Module build failed!
>>> - - -
>>> buildlog excerpts:
>>> /usr/lib/hsfmodem/modules/osnvm.c:408:8: error: 'MUTEX' undeclared here
>>> (not
>>> in a function)
>>> make[2]: *** [/usr/lib/hsfmodem/modules/osnvm.o] Error 1
>>> make[1]: *** [_module_/usr/lib/hsfmodem/modules] Error 2
>>>
>>> so I again did this:
>>> replace DECLARE_MUTEX with DEFINE_SEMAPHORE in:
>>> - /usr/lib/hcfpcimodem/modules/osnvm.c
>>> - /usr/lib/hcfpcimodem/modules/GPL/serial_cnxt.c
>>> replace .ioctl with .compat_ioctl in:
>>> - /usr/lib/hcfpcimodem/modules/osdiag.c
>>>
>>> and "hsfconfig" got...
>>> Warning: no device detected by hsf driver - HDA modems may require reboot
>>> Note: HDA support not compiled in the driver
>>>
>>> then I ran everything (whew!) from "Ganton's Avatar" at
>>> http://ubuntuforums.org/showthread.php?t=1781268
>>> and again got exactly the same message with "hsfconfig"
>>> (issue not [SOLVED] as stated)
>>>
>>> with another hsfconfig, it asked
>>> Warning: existing driver modules found under:
>>>     /lib/modules/2.6.38-11-generic/
>>> Would you like to keep using them? [no]
>>> ...and I pressed [enter]
>>> but got similar results
>>> -  -  - (end of exploits for the day, besides a little blackberry
>>> picking)-
>>> - - - - -
>>>
>>> Thanks again for helping,
>>>
>>> Jeff
>>>
>>>
>>>
>>> -----Original Message-----
>>> From: Antonio Olivares <olivares14031@xxxxxxxxx>
>>> To: cohanjeffrey@xxxxxxx
>>> Cc: discuss@xxxxxxxxxxxxx; Linuxant support (Jonathan)
>>> <support@xxxxxxxxxxxx>; Marvin Stodolsky <marvin.stodolsky@xxxxxxxxx>
>>> Sent: Thu, Aug 25, 2011 6:56 pm
>>> Subject: Re: no dial-up: hsfmodem and alsa-driver-linuxant problem?
>>>
>>>
>>>
>>>
>>> Jeffrey,
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>> Something is strange.  I try the package (hsf) and it runs for me, I
>>>
>>>
>>>
>>> can't find errors:
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>> [olivares@acer-aspire-1 hsfmodem-7.80.02.06full]$ su -c 'make install'
>>>
>>>
>>>
>>> Password:
>>>
>>>
>>>
>>> make[1]: Entering directory
>>>
>>>
>>>
>>> `/home/olivares/Downloads/hsfmodem-7.80.02.06full/nvm'
>>>
>>>
>>>
>>> mkdir -m 755 -p cvt
>>>
>>>
>>>
>>> sed -e 's!@CNXTLINUXVERSION@!7.80.02.06full!g' -e
>>>
>>>
>>>
>>> 's!@CNXTTARGET@!hsf!g' -e 's!@CNXTDRVDSC@!Conexant HSF softmodem!g' <
>>>
>>>
>>>
>>> inf/hsfpcibasic2.inf | ./cvtinf.pl cvt/hsfpcibasic2; if [ -n
>>>
>>>
>>>
>>> "inf/hsf.cty" ]; then ./cvtinf.pl cvt/hsfpcibasic2 < "inf/hsf.cty";
>>>
>>>
>>>
>>> else true; fi
>>>
>>>
>>>
>>> (cd cvt/hsfpcibasic2/Region && grep -v -l '*' *NAME | sed -e 's/^0//'
>>>
>>>
>>>
>>> -e 's/^0//' -e 's/_NAME$//' | tr '
>>> ' ',' | sed -e 's/,$//' -e
>>>
>>>
>>>
>>> 's/^/"/' -e 's/$/"/' ; echo "") > cvt/hsfpcibasic2/COUNTRY_CODE_LIST
>>>
>>>
>>>
>>> sed -e 's!@CNXTLINUXVERSION@!7.80.02.06full!g' -e
>>>
>>>
>>>
>>> 's!@CNXTTARGET@!hsf!g' -e 's!@CNXTDRVDSC@!Conexant HSF softmodem!g' <
>>>
>>>
>>>
>>> inf/hsfpcibasic2smart.inf | ./cvtinf.pl cvt/hsfpcibasic2smart; if [ -n
>>>
>>>
>>>
>>> "" ]; then ./cvtinf.pl cvt/hsfpcibasic2smart < ""; else true; fi
>>>
>>>
>>>
>>> if [ -d cvt/hsfpcibasic2/Profile ]; then ln -sf
>>>
>>>
>>>
>>> ../hsfpcibasic2/Profile cvt/hsfpcibasic2smart/.; else true; fi
>>>
>>>
>>>
>>> ln -sf ../hsfpcibasic2/Region cvt/hsfpcibasic2smart/.
>>>
>>>
>>>
>>> (cd cvt/hsfpcibasic2smart/Region && grep -v -l '*' *NAME | sed -e
>>>
>>>
>>>
>>> 's/^0//' -e 's/^0//' -e 's/_NAME$//' | tr '
>>> ' ',' | sed -e 's/,$//'
>>>
>>>
>>>
>>> -e 's/^/"/' -e 's/$/"/' ; echo "") >
>>>
>>>
>>>
>>> cvt/hsfpcibasic2smart/COUNTRY_CODE_LIST
>>>
>>>
>>>
>>> sed -e 's!@CNXTLINUXVERSION@!7.80.02.06full!g' -e
>>>
>>>
>>>
>>> 's!@CNXTTARGET@!hsf!g' -e 's!@CNXTDRVDSC@!Conexant HSF softmodem!g' <
>>>
>>>
>>>
>>> inf/hsfpcibasic2hsfi.inf | ./cvtinf.pl cvt/hsfpcibasic2hsfi; if [ -n
>>>
>>>
>>>
>>> "inf/hsf.cty" ]; then ./cvtinf.pl cvt/hsfpcibasic2hsfi <
>>>
>>>
>>>
>>> "inf/hsf.cty"; else true; fi
>>>
>>>
>>>
>>> rm -rf cvt/hsfpcibasic2hsfi/Region
>>>
>>>
>>>
>>> ln -sf ../hsfpcibasic2/Region cvt/hsfpcibasic2hsfi/.
>>>
>>>
>>>
>>> (cd cvt/hsfpcibasic2hsfi/Region && grep -v -l '*' *NAME | sed -e
>>>
>>>
>>>
>>> 's/^0//' -e 's/^0//' -e 's/_NAME$//' | tr '
>>> ' ',' | sed -e 's/,$//'
>>>
>>>
>>>
>>> -e 's/^/"/' -e 's/$/"/' ; echo "") >
>>>
>>>
>>>
>>> cvt/hsfpcibasic2hsfi/COUNTRY_CODE_LIST
>>>
>>>
>>>
>>> sed -e 's!@CNXTLINUXVERSION@!7.80.02.06full!g' -e
>>>
>>>
>>>
>>> 's!@CNXTTARGET@!hsf!g' -e 's!@CNXTDRVDSC@!Conexant HSF softmodem!g' <
>>>
>>>
>>>
>>> inf/hsfpcibasic2bry.inf | ./cvtinf.pl cvt/hsfpcibasic2bry; if [ -n
>>>
>>>
>>>
>>> "inf/hsf.cty" ]; then ./cvtinf.pl cvt/hsfpcibasic2bry < "inf/hsf.cty";
>>>
>>>
>>>
>>> else true; fi
>>>
>>>
>>>
>>> rm -rf cvt/hsfpcibasic2bry/Region
>>>
>>>
>>>
>>> ln -sf ../hsfpcibasic2/Region cvt/hsfpcibasic2bry/.
>>>
>>>
>>>
>>> (cd cvt/hsfpcibasic2bry/Region && grep -v -l '*' *NAME | sed -e
>>>
>>>
>>>
>>> 's/^0//' -e 's/^0//' -e 's/_NAME$//' | tr '
>>> ' ',' | sed -e 's/,$//'
>>>
>>>
>>>
>>> -e 's/^/"/' -e 's/$/"/' ; echo "") >
>>>
>>>
>>>
>>> cvt/hsfpcibasic2bry/COUNTRY_CODE_LIST
>>>
>>>
>>>
>>> sed -e 's!@CNXTLINUXVERSION@!7.80.02.06full!g' -e
>>>
>>>
>>>
>>> 's!@CNXTTARGET@!hsf!g' -e 's!@CNXTDRVDSC@!Conexant HSF softmodem!g' <
>>>
>>>
>>>
>>> inf/hsfpcibasic3.inf | ./cvtinf.pl cvt/hsfpcibasic3; if [ -n
>>>
>>>
>>>
>>> "inf/hsf.cty" ]; then ./cvtinf.pl cvt/hsfpcibasic3 < "inf/hsf.cty";
>>>
>>>
>>>
>>> else true; fi
>>>
>>>
>>>
>>> rm -rf cvt/hsfpcibasic3/Region
>>>
>>>
>>>
>>> ln -sf ../hsfpcibasic2/Region cvt/hsfpcibasic3/.
>>>
>>>
>>>
>>> (cd cvt/hsfpcibasic3/Region && grep -v -l '*' *NAME | sed -e 's/^0//'
>>>
>>>
>>>
>>> -e 's/^0//' -e 's/_NAME$//' | tr '
>>> ' ',' | sed -e 's/,$//' -e
>>>
>>>
>>>
>>> 's/^/"/' -e 's/$/"/' ; echo "") > cvt/hsfpcibasic3/COUNTRY_CODE_LIST
>>>
>>>
>>>
>>> sed -e 's!@CNXTLINUXVERSION@!7.80.02.06full!g' -e
>>>
>>>
>>>
>>> 's!@CNXTTARGET@!hsf!g' -e 's!@CNXTDRVDSC@!Conexant HSF softmodem!g' <
>>>
>>>
>>>
>>> inf/hsfmc97ich.inf | ./cvtinf.pl cvt/hsfmc97; if [ -n "" ]; then
>>>
>>>
>>>
>>> ./cvtinf.pl cvt/hsfmc97 < ""; else true; fi
>>>
>>>
>>>
>>> rm -f mc97/HW_ADAPTER_TYPE
>>>
>>>
>>>
>>> ln -sf ../hsfpcibasic2smart/Profile cvt/hsfmc97/.
>>>
>>>
>>>
>>> ln -sf ../hsfpcibasic2smart/Region cvt/hsfmc97/.
>>>
>>>
>>>
>>> (cd cvt/hsfmc97/Region && grep -v -l '*' *NAME | sed -e 's/^0//' -e
>>>
>>>
>>>
>>> 's/^0//' -e 's/_NAME$//' | tr '
>>> ' ',' | sed -e 's/,$//' -e 's/^/"/'
>>>
>>>
>>>
>>> -e 's/$/"/' ; echo "") > cvt/hsfmc97/COUNTRY_CODE_LIST
>>>
>>>
>>>
>>> ln -sf `basename cvt/hsfmc97` cvt/hsfmc97ali
>>>
>>>
>>>
>>> ln -sf `basename cvt/hsfmc97` cvt/hsfmc97ati
>>>
>>>
>>>
>>> ln -sf `basename cvt/hsfmc97` cvt/hsfmc97ich
>>>
>>>
>>>
>>> ln -sf `basename cvt/hsfmc97` cvt/hsfmc97sis
>>>
>>>
>>>
>>> ln -sf `basename cvt/hsfmc97` cvt/hsfmc97via
>>>
>>>
>>>
>>> sed -e 's!@CNXTLINUXVERSION@!7.80.02.06full!g' -e
>>>
>>>
>>>
>>> 's!@CNXTTARGET@!hsf!g' -e 's!@CNXTDRVDSC@!Conexant HSF softmodem!g' <
>>>
>>>
>>>
>>> inf/hsfcadmus2.inf | ./cvtinf.pl cvt/hsfcadmus2; if [ -n "" ]; then
>>>
>>>
>>>
>>> ./cvtinf.pl cvt/hsfcadmus2 < ""; else true; fi
>>>
>>>
>>>
>>> rm -f cadmus2/HW_ADAPTER_TYPE
>>>
>>>
>>>
>>> ln -sf ../hsfpcibasic2/Profile cvt/hsfcadmus2/.
>>>
>>>
>>>
>>> ln -sf ../hsfpcibasic2/Region cvt/hsfcadmus2/.
>>>
>>>
>>>
>>> (cd cvt/hsfcadmus2/Region && grep -v -l '*' *NAME | sed -e 's/^0//'
>>>
>>>
>>>
>>> -e 's/^0//' -e 's/_NAME$//' | tr '
>>> ' ',' | sed -e 's/,$//' -e
>>>
>>>
>>>
>>> 's/^/"/' -e 's/$/"/' ; echo "") > cvt/hsfcadmus2/COUNTRY_CODE_LIST
>>>
>>>
>>>
>>> sed -e 's!@CNXTLINUXVERSION@!7.80.02.06full!g' -e
>>>
>>>
>>>
>>> 's!@CNXTTARGET@!hsf!g' -e 's!@CNXTDRVDSC@!Conexant HSF softmodem!g' <
>>>
>>>
>>>
>>> inf/hsfcadmus2smart.inf | ./cvtinf.pl cvt/hsfcadmus2smart; if [ -n ""
>>>
>>>
>>>
>>> ]; then ./cvtinf.pl cvt/hsfcadmus2smart < ""; else true; fi
>>>
>>>
>>>
>>> rm -f cadmus2smart/HW_ADAPTER_TYPE
>>>
>>>
>>>
>>> ln -sf ../hsfpcibasic2smart/Profile cvt/hsfcadmus2smart/.
>>>
>>>
>>>
>>> ln -sf ../hsfpcibasic2smart/Region cvt/hsfcadmus2smart/.
>>>
>>>
>>>
>>> (cd cvt/hsfcadmus2smart/Region && grep -v -l '*' *NAME | sed -e
>>>
>>>
>>>
>>> 's/^0//' -e 's/^0//' -e 's/_NAME$//' | tr '
>>> ' ',' | sed -e 's/,$//'
>>>
>>>
>>>
>>> -e 's/^/"/' -e 's/$/"/' ; echo "") >
>>>
>>>
>>>
>>> cvt/hsfcadmus2smart/COUNTRY_CODE_LIST
>>>
>>>
>>>
>>> sed -e 's!@CNXTLINUXVERSION@!7.80.02.06full!g' -e
>>>
>>>
>>>
>>> 's!@CNXTTARGET@!hsf!g' -e 's!@CNXTDRVDSC@!Conexant HSF softmodem!g' <
>>>
>>>
>>>
>>> inf/hsfhda.inf | ./cvtinf.pl cvt/hsfhda; if [ -n "" ]; then
>>>
>>>
>>>
>>> ./cvtinf.pl cvt/hsfhda < ""; else true; fi
>>>
>>>
>>>
>>> rm -f hda/HW_ADAPTER_TYPE
>>>
>>>
>>>
>>> ln -sf ../hsfpcibasic2smart/Profile cvt/hsfhda/.
>>>
>>>
>>>
>>> ln -sf ../hsfpcibasic2smart/Region cvt/hsfhda/.
>>>
>>>
>>>
>>> (cd cvt/hsfhda/Region && grep -v -l '*' *NAME | sed -e 's/^0//' -e
>>>
>>>
>>>
>>> 's/^0//' -e 's/_NAME$//' | tr '
>>> ' ',' | sed -e 's/,$//' -e 's/^/"/'
>>>
>>>
>>>
>>> -e 's/$/"/' ; echo "") > cvt/hsfhda/COUNTRY_CODE_LIST
>>>
>>>
>>>
>>> cd cvt && find . -type f ! -empty -exec md5sum {} ';' | sort |
>>>
>>>
>>>
>>> while read sum file ; do
>>>
>>>
>>>
>>>     if [ "$sum" = "$prevsum" ] && cmp -s "$file" "$prevfile"; then
>>>
>>>
>>>
>>>         rm -f "$file";
>>>
>>>
>>>
>>>         if ! ln "$prevfile" "$file"; then
>>>
>>>
>>>
>>>             echo 2>&1 "$0: ln FAILED - recreate $file based on
>>> $prevfile";
>>>
>>>
>>>
>>>             exit 1;
>>>
>>>
>>>
>>>         fi;
>>>
>>>
>>>
>>>     else
>>>
>>>
>>>
>>>         prevsum="$sum";
>>>
>>>
>>>
>>>         prevfile="$file";
>>>
>>>
>>>
>>>     fi;
>>>
>>>
>>>
>>> done
>>>
>>>
>>>
>>> touch cvt/.linksame
>>>
>>>
>>>
>>> mkdir -m 755 -p /etc/hsfmodem/nvm
>>>
>>>
>>>
>>> cd cvt && (find  hsfpcibasic2  hsfpcibasic2smart  hsfpcibasic2hsfi
>>>
>>>
>>>
>>> hsfpcibasic2bry  hsfpcibasic3  hsfmc97  hsfmc97ali  hsfmc97ati
>>>
>>>
>>>
>>> hsfmc97ich  hsfmc97sis  hsfmc97via  hsfcadmus2  hsfcadmus2smart
>>>
>>>
>>>
>>> hsfhda | cpio -pdmu /etc/hsfmodem/nvm)
>>>
>>>
>>>
>>> 127 blocks
>>>
>>>
>>>
>>> make[1]: Leaving directory
>>>
>>>
>>>
>>> `/home/olivares/Downloads/hsfmodem-7.80.02.06full/nvm'
>>>
>>>
>>>
>>> make[1]: Entering directory
>>>
>>>
>>>
>>> `/home/olivares/Downloads/hsfmodem-7.80.02.06full/scripts'
>>>
>>>
>>>
>>> sed
>>>
>>>
>>>
>>>     -e "s!@DATE@!`date "+%a, %d %b %Y %T %z"`!g"
>>>
>>>
>>>
>>>     -e 's!@CNXTDRIVER@!hsf!g'
>>>
>>>
>>>
>>>     -e 's!@CNXTDRVDSC@!Conexant HSF softmodem!g'
>>>
>>>
>>>
>>>     -e 's!@CNXTTARGET@!hsf!g'
>>>
>>>
>>>
>>>     -e 's!@CNXTARCH@!i386!g'
>>>
>>>
>>>
>>>     -e 's!@CNXTSERDEV@!HSF!g'
>>>
>>>
>>>
>>>     -e 's!@CNXTMAXMDM@!8!g'
>>>
>>>
>>>
>>>     -e 's!@CNXTETCDIR@!/etc/hsfmodem!g'
>>>
>>>
>>>
>>>     -e 's!@CNXTLIBDIR@!/usr/lib/hsfmodem!g'
>>>
>>>
>>>
>>>     -e 's!@CNXTSERIALMAJOR@!240!g'
>>>
>>>
>>>
>>>     -e 's!@CNXTCALOUTMAJOR@!241!g'
>>>
>>>
>>>
>>>     -e 's!@CNXTSERIALMINOR@!64!g'
>>>
>>>
>>>
>>>     -e 's!@CNXTDCPMAJOR@!242!g'
>>>
>>>
>>>
>>>     -e 's!@CNXTDIAGMAJOR@!243!g'
>>>
>>>
>>>
>>>     -e 's!@CNXTDIAGDMPMINOR@!255!g'
>>>
>>>
>>>
>>>     -e 's!@CNXTSCRMAJOR@!244!g'
>>>
>>>
>>>
>>>     -e 's!@CNXTSBINDIR@!/usr/sbin!g'
>>>
>>>
>>>
>>>     -e 's!@CNXTNVMDIR@!/etc/hsfmodem/nvm!g'
>>>
>>>
>>>
>>>     -e 's!@CNXTLINUXVERSION@!7.80.02.06full!g'
>>>
>>>
>>>
>>>     -e 's!@CNXTLINUX_REL@!1!g'
>>>
>>>
>>>
>>>     -e 's!@CNXTLINUXRPM_REL@!1!g'
>>>
>>>
>>>
>>>     -e 's!@CNXTLINUXDEB_REL@!1!g'
>>>
>>>
>>>
>>>     -e 's!@CNXTMODS@!hsfpcibasic2 hsfpcibasic3 hsfmc97ich hsfmc97via
>>>
>>>
>>>
>>> hsfmc97ali hsfmc97ati hsfmc97sis hsfusbcd2 snd_hda_codec_hsfmodem
>>>
>>>
>>>
>>> hsfhda hsfsoar hsfserial hsfengine hsfosspec!g'
>>>
>>>
>>>
>>>     -e
>>>
>>>
>>> 's!@PATCHERURL@!http://www.linuxant.com/drivers/hsf/full/archive/patches!g'
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>     -e
>>>
>>>
>>> 's!@PATCHERURLUSER@!http://www.linuxant.com/drivers/hsf/downloads-patches.php!g'
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>     -e "s!@BLAM_SUPPORT@!`test ! "" = yes; echo $?`!g"
>>>
>>>
>>>
>>>     -e "s!@SCR_SUPPORT@!`test ! "" = yes; echo $?`!g"
>>>
>>>
>>>
>>>     -e "s!@DMP_SUPPORT@!`test -z ""; echo $?`!g"
>>>
>>>
>>>
>>>     < patcher.in > patcher
>>>
>>>
>>>
>>> chmod --reference=patcher.in patcher
>>>
>>>
>>>
>>> ln -s cnxtconfig.in hsfconfig.in
>>>
>>>
>>>
>>> sed
>>>
>>>
>>>
>>>     -e "s!@DATE@!`date "+%a, %d %b %Y %T %z"`!g"
>>>
>>>
>>>
>>>     -e 's!@CNXTDRIVER@!hsf!g'
>>>
>>>
>>>
>>>     -e 's!@CNXTDRVDSC@!Conexant HSF softmodem!g'
>>>
>>>
>>>
>>>     -e 's!@CNXTTARGET@!hsf!g'
>>>
>>>
>>>
>>>     -e 's!@CNXTARCH@!i386!g'
>>>
>>>
>>>
>>>     -e 's!@CNXTSERDEV@!HSF!g'
>>>
>>>
>>>
>>>     -e 's!@CNXTMAXMDM@!8!g'
>>>
>>>
>>>
>>>     -e 's!@CNXTETCDIR@!/etc/hsfmodem!g'
>>>
>>>
>>>
>>>     -e 's!@CNXTLIBDIR@!/usr/lib/hsfmodem!g'
>>>
>>>
>>>
>>>     -e 's!@CNXTSERIALMAJOR@!240!g'
>>>
>>>
>>>
>>>     -e 's!@CNXTCALOUTMAJOR@!241!g'
>>>
>>>
>>>
>>>     -e 's!@CNXTSERIALMINOR@!64!g'
>>>
>>>
>>>
>>>     -e 's!@CNXTDCPMAJOR@!242!g'
>>>
>>>
>>>
>>>     -e 's!@CNXTDIAGMAJOR@!243!g'
>>>
>>>
>>>
>>>     -e 's!@CNXTDIAGDMPMINOR@!255!g'
>>>
>>>
>>>
>>>     -e 's!@CNXTSCRMAJOR@!244!g'
>>>
>>>
>>>
>>>     -e 's!@CNXTSBINDIR@!/usr/sbin!g'
>>>
>>>
>>>
>>>     -e 's!@CNXTNVMDIR@!/etc/hsfmodem/nvm!g'
>>>
>>>
>>>
>>>     -e 's!@CNXTLINUXVERSION@!7.80.02.06full!g'
>>>
>>>
>>>
>>>     -e 's!@CNXTLINUX_REL@!1!g'
>>>
>>>
>>>
>>>     -e 's!@CNXTLINUXRPM_REL@!1!g'
>>>
>>>
>>>
>>>     -e 's!@CNXTLINUXDEB_REL@!1!g'
>>>
>>>
>>>
>>>     -e 's!@CNXTMODS@!hsfpcibasic2 hsfpcibasic3 hsfmc97ich hsfmc97via
>>>
>>>
>>>
>>> hsfmc97ali hsfmc97ati hsfmc97sis hsfusbcd2 snd_hda_codec_hsfmodem
>>>
>>>
>>>
>>> hsfhda hsfsoar hsfserial hsfengine hsfosspec!g'
>>>
>>>
>>>
>>>     -e
>>>
>>>
>>> 's!@PATCHERURL@!http://www.linuxant.com/drivers/hsf/full/archive/patches!g'
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>     -e
>>>
>>>
>>> 's!@PATCHERURLUSER@!http://www.linuxant.com/drivers/hsf/downloads-patches.php!g'
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>     -e "s!@BLAM_SUPPORT@!`test ! "" = yes; echo $?`!g"
>>>
>>>
>>>
>>>     -e "s!@SCR_SUPPORT@!`test ! "" = yes; echo $?`!g"
>>>
>>>
>>>
>>>     -e "s!@DMP_SUPPORT@!`test -z ""; echo $?`!g"
>>>
>>>
>>>
>>>     < hsfconfig.in > hsfconfig
>>>
>>>
>>>
>>> chmod --reference=hsfconfig.in hsfconfig
>>>
>>>
>>>
>>> ln -s cnxtstop.in hsfstop.in
>>>
>>>
>>>
>>> sed
>>>
>>>
>>>
>>>     -e "s!@DATE@!`date "+%a, %d %b %Y %T %z"`!g"
>>>
>>>
>>>
>>>     -e 's!@CNXTDRIVER@!hsf!g'
>>>
>>>
>>>
>>>     -e 's!@CNXTDRVDSC@!Conexant HSF softmodem!g'
>>>
>>>
>>>
>>>     -e 's!@CNXTTARGET@!hsf!g'
>>>
>>>
>>>
>>>     -e 's!@CNXTARCH@!i386!g'
>>>
>>>
>>>
>>>     -e 's!@CNXTSERDEV@!HSF!g'
>>>
>>>
>>>
>>>     -e 's!@CNXTMAXMDM@!8!g'
>>>
>>>
>>>
>>>     -e 's!@CNXTETCDIR@!/etc/hsfmodem!g'
>>>
>>>
>>>
>>>     -e 's!@CNXTLIBDIR@!/usr/lib/hsfmodem!g'
>>>
>>>
>>>
>>>     -e 's!@CNXTSERIALMAJOR@!240!g'
>>>
>>>
>>>
>>>     -e 's!@CNXTCALOUTMAJOR@!241!g'
>>>
>>>
>>>
>>>     -e 's!@CNXTSERIALMINOR@!64!g'
>>>
>>>
>>>
>>>     -e 's!@CNXTDCPMAJOR@!242!g'
>>>
>>>
>>>
>>>     -e 's!@CNXTDIAGMAJOR@!243!g'
>>>
>>>
>>>
>>>     -e 's!@CNXTDIAGDMPMINOR@!255!g'
>>>
>>>
>>>
>>>     -e 's!@CNXTSCRMAJOR@!244!g'
>>>
>>>
>>>
>>>     -e 's!@CNXTSBINDIR@!/usr/sbin!g'
>>>
>>>
>>>
>>>     -e 's!@CNXTNVMDIR@!/etc/hsfmodem/nvm!g'
>>>
>>>
>>>
>>>     -e 's!@CNXTLINUXVERSION@!7.80.02.06full!g'
>>>
>>>
>>>
>>>     -e 's!@CNXTLINUX_REL@!1!g'
>>>
>>>
>>>
>>>     -e 's!@CNXTLINUXRPM_REL@!1!g'
>>>
>>>
>>>
>>>     -e 's!@CNXTLINUXDEB_REL@!1!g'
>>>
>>>
>>>
>>>     -e 's!@CNXTMODS@!hsfpcibasic2 hsfpcibasic3 hsfmc97ich hsfmc97via
>>>
>>>
>>>
>>> hsfmc97ali hsfmc97ati hsfmc97sis hsfusbcd2 snd_hda_codec_hsfmodem
>>>
>>>
>>>
>>> hsfhda hsfsoar hsfserial hsfengine hsfosspec!g'
>>>
>>>
>>>
>>>     -e
>>>
>>>
>>> 's!@PATCHERURL@!http://www.linuxant.com/drivers/hsf/full/archive/patches!g'
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>     -e
>>>
>>>
>>> 's!@PATCHERURLUSER@!http://www.linuxant.com/drivers/hsf/downloads-patches.php!g'
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>     -e "s!@BLAM_SUPPORT@!`test ! "" = yes; echo $?`!g"
>>>
>>>
>>>
>>>     -e "s!@SCR_SUPPORT@!`test ! "" = yes; echo $?`!g"
>>>
>>>
>>>
>>>     -e "s!@DMP_SUPPORT@!`test -z ""; echo $?`!g"
>>>
>>>
>>>
>>>     < hsfstop.in > hsfstop
>>>
>>>
>>>
>>> chmod --reference=hsfstop.in hsfstop
>>>
>>>
>>>
>>> ln -s cnxtmodconflicts.in hsfmodconflicts.in
>>>
>>>
>>>
>>> sed
>>>
>>>
>>>
>>>     -e "s!@DATE@!`date "+%a, %d %b %Y %T %z"`!g"
>>>
>>>
>>>
>>>     -e 's!@CNXTDRIVER@!hsf!g'
>>>
>>>
>>>
>>>     -e 's!@CNXTDRVDSC@!Conexant HSF softmodem!g'
>>>
>>>
>>>
>>>     -e 's!@CNXTTARGET@!hsf!g'
>>>
>>>
>>>
>>>     -e 's!@CNXTARCH@!i386!g'
>>>
>>>
>>>
>>>     -e 's!@CNXTSERDEV@!HSF!g'
>>>
>>>
>>>
>>>     -e 's!@CNXTMAXMDM@!8!g'
>>>
>>>
>>>
>>>     -e 's!@CNXTETCDIR@!/etc/hsfmodem!g'
>>>
>>>
>>>
>>>     -e 's!@CNXTLIBDIR@!/usr/lib/hsfmodem!g'
>>>
>>>
>>>
>>>     -e 's!@CNXTSERIALMAJOR@!240!g'
>>>
>>>
>>>
>>>     -e 's!@CNXTCALOUTMAJOR@!241!g'
>>>
>>>
>>>
>>>     -e 's!@CNXTSERIALMINOR@!64!g'
>>>
>>>
>>>
>>>     -e 's!@CNXTDCPMAJOR@!242!g'
>>>
>>>
>>>
>>>     -e 's!@CNXTDIAGMAJOR@!243!g'
>>>
>>>
>>>
>>>     -e 's!@CNXTDIAGDMPMINOR@!255!g'
>>>
>>>
>>>
>>>     -e 's!@CNXTSCRMAJOR@!244!g'
>>>
>>>
>>>
>>>     -e 's!@CNXTSBINDIR@!/usr/sbin!g'
>>>
>>>
>>>
>>>     -e 's!@CNXTNVMDIR@!/etc/hsfmodem/nvm!g'
>>>
>>>
>>>
>>>     -e 's!@CNXTLINUXVERSION@!7.80.02.06full!g'
>>>
>>>
>>>
>>>     -e 's!@CNXTLINUX_REL@!1!g'
>>>
>>>
>>>
>>>     -e 's!@CNXTLINUXRPM_REL@!1!g'
>>>
>>>
>>>
>>>     -e 's!@CNXTLINUXDEB_REL@!1!g'
>>>
>>>
>>>
>>>     -e 's!@CNXTMODS@!hsfpcibasic2 hsfpcibasic3 hsfmc97ich hsfmc97via
>>>
>>>
>>>
>>> hsfmc97ali hsfmc97ati hsfmc97sis hsfusbcd2 snd_hda_codec_hsfmodem
>>>
>>>
>>>
>>> hsfhda hsfsoar hsfserial hsfengine hsfosspec!g'
>>>
>>>
>>>
>>>     -e
>>>
>>>
>>> 's!@PATCHERURL@!http://www.linuxant.com/drivers/hsf/full/archive/patches!g'
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>     -e
>>>
>>>
>>> 's!@PATCHERURLUSER@!http://www.linuxant.com/drivers/hsf/downloads-patches.php!g'
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>     -e "s!@BLAM_SUPPORT@!`test ! "" = yes; echo $?`!g"
>>>
>>>
>>>
>>>     -e "s!@SCR_SUPPORT@!`test ! "" = yes; echo $?`!g"
>>>
>>>
>>>
>>>     -e "s!@DMP_SUPPORT@!`test -z ""; echo $?`!g"
>>>
>>>
>>>
>>>     < hsfmodconflicts.in > hsfmodconflicts
>>>
>>>
>>>
>>> chmod --reference=hsfmodconflicts.in hsfmodconflicts
>>>
>>>
>>>
>>> ln -s cnxtdcpd.in hsfdcpd.in
>>>
>>>
>>>
>>> sed
>>>
>>>
>>>
>>>     -e "s!@DATE@!`date "+%a, %d %b %Y %T %z"`!g"
>>>
>>>
>>>
>>>     -e 's!@CNXTDRIVER@!hsf!g'
>>>
>>>
>>>
>>>     -e 's!@CNXTDRVDSC@!Conexant HSF softmodem!g'
>>>
>>>
>>>
>>>     -e 's!@CNXTTARGET@!hsf!g'
>>>
>>>
>>>
>>>     -e 's!@CNXTARCH@!i386!g'
>>>
>>>
>>>
>>>     -e 's!@CNXTSERDEV@!HSF!g'
>>>
>>>
>>>
>>>     -e 's!@CNXTMAXMDM@!8!g'
>>>
>>>
>>>
>>>     -e 's!@CNXTETCDIR@!/etc/hsfmodem!g'
>>>
>>>
>>>
>>>     -e 's!@CNXTLIBDIR@!/usr/lib/hsfmodem!g'
>>>
>>>
>>>
>>>     -e 's!@CNXTSERIALMAJOR@!240!g'
>>>
>>>
>>>
>>>     -e 's!@CNXTCALOUTMAJOR@!241!g'
>>>
>>>
>>>
>>>     -e 's!@CNXTSERIALMINOR@!64!g'
>>>
>>>
>>>
>>>     -e 's!@CNXTDCPMAJOR@!242!g'
>>>
>>>
>>>
>>>     -e 's!@CNXTDIAGMAJOR@!243!g'
>>>
>>>
>>>
>>>     -e 's!@CNXTDIAGDMPMINOR@!255!g'
>>>
>>>
>>>
>>>     -e 's!@CNXTSCRMAJOR@!244!g'
>>>
>>>
>>>
>>>     -e 's!@CNXTSBINDIR@!/usr/sbin!g'
>>>
>>>
>>>
>>>     -e 's!@CNXTNVMDIR@!/etc/hsfmodem/nvm!g'
>>>
>>>
>>>
>>>     -e 's!@CNXTLINUXVERSION@!7.80.02.06full!g'
>>>
>>>
>>>
>>>     -e 's!@CNXTLINUX_REL@!1!g'
>>>
>>>
>>>
>>>     -e 's!@CNXTLINUXRPM_REL@!1!g'
>>>
>>>
>>>
>>>     -e 's!@CNXTLINUXDEB_REL@!1!g'
>>>
>>>
>>>
>>>     -e 's!@CNXTMODS@!hsfpcibasic2 hsfpcibasic3 hsfmc97ich hsfmc97via
>>>
>>>
>>>
>>> hsfmc97ali hsfmc97ati hsfmc97sis hsfusbcd2 snd_hda_codec_hsfmodem
>>>
>>>
>>>
>>> hsfhda hsfsoar hsfserial hsfengine hsfosspec!g'
>>>
>>>
>>>
>>>     -e
>>>
>>>
>>> 's!@PATCHERURL@!http://www.linuxant.com/drivers/hsf/full/archive/patches!g'
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>     -e
>>>
>>>
>>> 's!@PATCHERURLUSER@!http://www.linuxant.com/drivers/hsf/downloads-patches.php!g'
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>     -e "s!@BLAM_SUPPORT@!`test ! "" = yes; echo $?`!g"
>>>
>>>
>>>
>>>     -e "s!@SCR_SUPPORT@!`test ! "" = yes; echo $?`!g"
>>>
>>>
>>>
>>>     -e "s!@DMP_SUPPORT@!`test -z ""; echo $?`!g"
>>>
>>>
>>>
>>>     < hsfdcpd.in > hsfdcpd
>>>
>>>
>>>
>>> chmod --reference=hsfdcpd.in hsfdcpd
>>>
>>>
>>>
>>> install -m 700 hsfconfig hsfstop hsfmodconflicts hsfdcpd /usr/sbin
>>>
>>>
>>>
>>> ln -s rccnxt.in rchsf.in
>>>
>>>
>>>
>>> sed
>>>
>>>
>>>
>>>     -e "s!@DATE@!`date "+%a, %d %b %Y %T %z"`!g"
>>>
>>>
>>>
>>>     -e 's!@CNXTDRIVER@!hsf!g'
>>>
>>>
>>>
>>>     -e 's!@CNXTDRVDSC@!Conexant HSF softmodem!g'
>>>
>>>
>>>
>>>     -e 's!@CNXTTARGET@!hsf!g'
>>>
>>>
>>>
>>>     -e 's!@CNXTARCH@!i386!g'
>>>
>>>
>>>
>>>     -e 's!@CNXTSERDEV@!HSF!g'
>>>
>>>
>>>
>>>     -e 's!@CNXTMAXMDM@!8!g'
>>>
>>>
>>>
>>>     -e 's!@CNXTETCDIR@!/etc/hsfmodem!g'
>>>
>>>
>>>
>>>     -e 's!@CNXTLIBDIR@!/usr/lib/hsfmodem!g'
>>>
>>>
>>>
>>>     -e 's!@CNXTSERIALMAJOR@!240!g'
>>>
>>>
>>>
>>>     -e 's!@CNXTCALOUTMAJOR@!241!g'
>>>
>>>
>>>
>>>     -e 's!@CNXTSERIALMINOR@!64!g'
>>>
>>>
>>>
>>>     -e 's!@CNXTDCPMAJOR@!242!g'
>>>
>>>
>>>
>>>     -e 's!@CNXTDIAGMAJOR@!243!g'
>>>
>>>
>>>
>>>     -e 's!@CNXTDIAGDMPMINOR@!255!g'
>>>
>>>
>>>
>>>     -e 's!@CNXTSCRMAJOR@!244!g'
>>>
>>>
>>>
>>>     -e 's!@CNXTSBINDIR@!/usr/sbin!g'
>>>
>>>
>>>
>>>     -e 's!@CNXTNVMDIR@!/etc/hsfmodem/nvm!g'
>>>
>>>
>>>
>>>     -e 's!@CNXTLINUXVERSION@!7.80.02.06full!g'
>>>
>>>
>>>
>>>     -e 's!@CNXTLINUX_REL@!1!g'
>>>
>>>
>>>
>>>     -e 's!@CNXTLINUXRPM_REL@!1!g'
>>>
>>>
>>>
>>>     -e 's!@CNXTLINUXDEB_REL@!1!g'
>>>
>>>
>>>
>>>     -e 's!@CNXTMODS@!hsfpcibasic2 hsfpcibasic3 hsfmc97ich hsfmc97via
>>>
>>>
>>>
>>> hsfmc97ali hsfmc97ati hsfmc97sis hsfusbcd2 snd_hda_codec_hsfmodem
>>>
>>>
>>>
>>> hsfhda hsfsoar hsfserial hsfengine hsfosspec!g'
>>>
>>>
>>>
>>>     -e
>>>
>>>
>>> 's!@PATCHERURL@!http://www.linuxant.com/drivers/hsf/full/archive/patches!g'
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>     -e
>>>
>>>
>>> 's!@PATCHERURLUSER@!http://www.linuxant.com/drivers/hsf/downloads-patches.php!g'
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>     -e "s!@BLAM_SUPPORT@!`test ! "" = yes; echo $?`!g"
>>>
>>>
>>>
>>>     -e "s!@SCR_SUPPORT@!`test ! "" = yes; echo $?`!g"
>>>
>>>
>>>
>>>     -e "s!@DMP_SUPPORT@!`test -z ""; echo $?`!g"
>>>
>>>
>>>
>>>     < rchsf.in > rchsf
>>>
>>>
>>>
>>> chmod --reference=rchsf.in rchsf
>>>
>>>
>>>
>>> mkdir -m 755 -p /usr/lib/hsfmodem
>>>
>>>
>>>
>>> install -m 700 rchsf /usr/lib/hsfmodem
>>>
>>>
>>>
>>> make[1]: Leaving directory
>>>
>>>
>>>
>>> `/home/olivares/Downloads/hsfmodem-7.80.02.06full/scripts'
>>>
>>>
>>>
>>> make[1]: Entering directory
>>>
>>>
>>>
>>> `/home/olivares/Downloads/hsfmodem-7.80.02.06full/modules'
>>>
>>>
>>>
>>> rm -rf "/usr/lib/hsfmodem/config.mak"
>>>
>>>
>>>
>>> "/usr/lib/hsfmodem/modules/imported" "/usr/lib/hsfmodem/modules"
>>>
>>>
>>>
>>> mkdir -m 755 -p /usr/lib/hsfmodem/modules
>>>
>>>
>>>
>>> (cd .. && find config.mak modules/imported -depth -print | cpio -pdmu
>>>
>>>
>>>
>>> /usr/lib/hsfmodem)
>>>
>>>
>>>
>>> 5892 blocks
>>>
>>>
>>>
>>> find . ( -name COPYING -o -name '*.sh' -o -name '*.[ch]' -o -name
>>>
>>>
>>>
>>> '*.mak' -o -name '[Mm]akefile' ) -print | cpio -pdmu
>>>
>>>
>>>
>>> /usr/lib/hsfmodem/modules
>>>
>>>
>>>
>>> 3712 blocks
>>>
>>>
>>>
>>> find binaries -depth -print | cpio -pdmu /usr/lib/hsfmodem/modules
>>>
>>>
>>>
>>> 0 blocks
>>>
>>>
>>>
>>> make[1]: Leaving directory
>>>
>>>
>>>
>>> `/home/olivares/Downloads/hsfmodem-7.80.02.06full/modules'
>>>
>>>
>>>
>>> make[1]: Entering directory
>>>
>>>
>>>
>>> `/home/olivares/Downloads/hsfmodem-7.80.02.06full/diag'
>>>
>>>
>>>
>>> make[1]: Nothing to be done for `install'.
>>>
>>>
>>>
>>> make[1]: Leaving directory
>>>
>>>
>>>
>>> `/home/olivares/Downloads/hsfmodem-7.80.02.06full/diag'
>>>
>>>
>>>
>>> mkdir -p /etc/hsfmodem/log
>>>
>>>
>>>
>>> install -m 444 LICENSE /usr/lib/hsfmodem
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>> To complete the installation and configuration of your modem,
>>>
>>>
>>>
>>> please run "hsfconfig" (or "/usr/sbin/hsfconfig")
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>> Might it be with Ubuntu?  I used generic package with
>>>
>>>
>>>
>>> [olivares@acer-aspire-1 hsfmodem-7.80.02.06full]$ uname -a
>>>
>>>
>>>
>>> Linux acer-aspire-1 2.6.40-4.fc15.i686 #1 SMP Fri Jul 29 18:54:39 UTC
>>>
>>>
>>>
>>> 2011 i686 i686 i386 GNU/Linux
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>> Maybe Marv can test to find out what could be wrong?
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>> Regards,
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>> Antonio
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>> On Thu, Aug 25, 2011 at 8:02 PM, Antonio Olivares
>>>
>>>
>>>
>>> <olivares14031@xxxxxxxxx> wrote:
>>>
>>>
>>>
>>
>>>> Jeffrey,
>>
>>>
>>>
>>>
>>
>>>>
>>
>>>
>>>
>>>
>>
>>>> In the case you provided, you installed/tried to install the
>>
>>>
>>>
>>>
>>
>>>> alsa-linuxant package?
>>
>>>
>>>
>>>
>>
>>>>
>>
>>>
>>>
>>>
>>
>>>> You may not have needed this package.
>>
>>>
>>>
>>>
>>
>>>>
>>
>>>
>>>
>>>
>>
>>>> You do have kernel sources and compiler ready.  However, the
>>
>>>
>>>
>>>
>>
>>>> replacements on the hsfmodem would differ with the ones suggested by
>>
>>>
>>>
>>>
>>
>>>> Jonathan(Linuxant support), DECLARE_MUTEX, with DEFINE_SEMAPHORE after
>>
>>>
>>>
>>>
>>
>>>> you have detected where it bombs out or wait a bit till they(Linuxant)
>>
>>>
>>>
>>>
>>
>>>> patch up the code and make it ready to work.
>>
>>>
>>>
>>>
>>
>>>>
>>
>>>
>>>
>>>
>>
>>>> If someone has suggestions, please forward them to Jeffrey.
>>
>>>
>>>
>>>
>>
>>>>
>>
>>>
>>>
>>>
>>
>>>> Regards,
>>
>>>
>>>
>>>
>>
>>>>
>>
>>>
>>>
>>>
>>
>>>> Antonio
>>
>>>
>>>
>>>
>>
>>>>
>>
>>>
>>>
>>>
>>
>>>>
>>
>>>
>>>
>>>
>>
>>>> On Thu, Aug 25, 2011 at 5:15 PM,  <cohanjeffrey@xxxxxxx> wrote:
>>
>>>
>>>
>>>
>>
>>>>> Great to hear from you Antonio. I'm working only with the Sony 32-bit
>>>>> VAIO
>>
>>>
>>>
>>>
>>
>>>>> VGN-N130G and will attach ModemData.txt again.
>>
>>>
>>>
>>>
>>
>>>>>
>>
>>>
>>>
>>>
>>
>>>>> 1) I did this BUT substituted /hsfmodem/ for /hcfpcimodem/ and wvdial
>>>>> does
>>
>>>
>>>
>>>
>>
>>>>> not find a modem:
>>
>>>
>>>
>>>
>>
>>>>>
>>
>>>
>>>
>>>
>>
>>>>> replace DECLARE_MUTEX with DEFINE_SEMAPHORE in:
>>
>>>
>>>
>>>
>>
>>>>> - /usr/lib/hcfpcimodem/modules/osnvm.c
>>
>>>
>>>
>>>
>>
>>>>> - /usr/lib/hcfpcimodem/modules/GPL/serial_cnxt.c
>>
>>>
>>>
>>>
>>
>>>>> replace .ioctl with .compat_ioctl in:
>>
>>>
>>>
>>>
>>
>>>>> - /usr/lib/hcfpcimodem/modules/osdiag.c
>>
>>>
>>>
>>>
>>
>>>>>
>>
>>>
>>>
>>>
>>
>>>>> 2) ERRORS: Both alsa-driver-linuxant and hfsmodem packages install with
>>
>>>
>>>
>>>
>>
>>>>> errors, even when I remove them and re-install. Here are excerpts:
>>
>>>
>>>
>>>
>>
>>>>>
>>
>>>
>>>
>>>
>>
>>>>>     alsa-driver-linuxant_1.0.23.1_all.deb:
>>
>>>
>>>
>>>
>>
>>>>> ----in terminal:
>>
>>>
>>>
>>>
>>
>>>>> Building modules for the 2.6.38-11-generic kernel, please wait... done.
>>
>>>
>>>
>>>
>>
>>>>> ERROR: Build failed. Please review the build log at
>>
>>>
>>>
>>>
>>
>>>>> /tmp/alsa-driver-linuxant.26528.log
>>
>>>
>>>
>>>
>>
>>>>> dpkg: error processing alsa-driver-linuxant (--install):
>>
>>>
>>>
>>>
>>
>>>>>  subprocess installed post-installation script returned error exit
>>>>> status
>>>>> 2
>>
>>>
>>>
>>>
>>
>>>>> ----in log file:
>>
>>>
>>>
>>>
>>
>>>>> checking for GCC version... Kernel compiler:  Used compiler: gcc
>>
>>>
>>>
>>>
>>
>>>>> (Ubuntu/Linaro 4.5.2-8ubuntu4) 4.5.2
>>
>>>
>>>
>>>
>>
>>>>> *** NO PREDEFINED KERNEL COMPILER IS DETECTED
>>
>>>
>>>
>>>
>>
>>>>> *** Assuming the same compiler is used with the current system
>>>>> compiler.
>>
>>>
>>>
>>>
>>
>>>>> *** Please make sure that the same compiler version was used for
>>>>> building
>>
>>>
>>>
>>>
>>
>>>>> kernel.
>>
>>>
>>>
>>>
>>
>>>>> and later...
>>
>>>
>>>
>>>
>>
>>>>> /usr/lib/alsa-driver-linuxant/acore/pcm_native.c: In function
>>
>>>
>>>
>>>
>>
>>>>> ‘snd_pcm_hw_params’:
>>
>>>
>>>
>>>
>>
>>>>> /usr/lib/alsa-driver-linuxant/acore/pcm_native.c:489:2: error: implicit
>>
>>>
>>>
>>>
>>
>>>>> declaration of function ‘pm_qos_remove_requirement’
>>
>>>
>>>
>>>
>>
>>>>> /usr/lib/alsa-driver-linuxant/acore/pcm_native.c:492:3: error: implicit
>>
>>>
>>>
>>>
>>
>>>>> declaration of function ‘pm_qos_add_requirement’
>>
>>>
>>>
>>>
>>
>>>>> make[3]: *** [/usr/lib/alsa-driver-linuxant/acore/pcm_native.o] Error 1
>>
>>>
>>>
>>>
>>
>>>>> make[2]: *** [/usr/lib/alsa-driver-linuxant/acore] Error 2
>>
>>>
>>>
>>>
>>
>>>>> make[1]: *** [_module_/usr/lib/alsa-driver-linuxant] Error 2
>>
>>>
>>>
>>>
>>
>>>>> make[1]: Leaving directory `/usr/src/linux-headers-2.6.38-11-generic'
>>
>>>
>>>
>>>
>>
>>>>> make: *** [compile] Error 2
>>
>>>
>>>
>>>
>>
>>>>>
>>
>>>
>>>
>>>
>>
>>>>>     hsfmodem_7.80.02.06full_i386.deb:
>>
>>>
>>>
>>>
>>
>>>>> /usr/lib/hsfmodem/modules/osservices.c:1396:1: warning: the frame size
>>>>> of
>>
>>>
>>>
>>>
>>
>>>>> 1028 bytes is larger than 1024 bytes
>>
>>>
>>>
>>>
>>
>>>>>   CC [M]  /usr/lib/hsfmodem/modules/osstdio.o
>>
>>>
>>>
>>>
>>
>>>>>   CC [M]  /usr/lib/hsfmodem/modules/osnvm.o
>>
>>>
>>>
>>>
>>
>>>>> /usr/lib/hsfmodem/modules/osnvm.c:408:8: error: 'MUTEX' undeclared here
>>>>> (not
>>
>>>
>>>
>>>
>>
>>>>> in a function)
>>
>>>
>>>
>>>
>>
>>>>> make[2]: *** [/usr/lib/hsfmodem/modules/osnvm.o] Error 1
>>
>>>
>>>
>>>
>>
>>>>> make[1]: *** [_module_/usr/lib/hsfmodem/modules] Error 2
>>
>>>
>>>
>>>
>>
>>>>> make[1]: Leaving directory `/usr/src/linux-headers-2.6.38-11-generic'
>>
>>>
>>>
>>>
>>
>>>>> make: *** [all] Error 2
>>
>>>
>>>
>>>
>>
>>>>> ----I have the long hsfdiag.txt file from "hsfconfig --dumpdiag" and
>>>>> the
>>
>>>
>>>
>>>
>>
>>>>> buildlog files
>>
>>>
>>>
>>>
>>
>>>>>
>>
>>>
>>>
>>>
>>
>>>>> 3) $ uname -a (Jonathan had asked someone for this) gets:
>>
>>>
>>>
>>>
>>
>>>>> Linux whiskeybisquit-VGN-N130G 2.6.38-11-generic #48-Ubuntu SMP Fri Jul
>>>>> 29
>>
>>>
>>>
>>>
>>
>>>>> 19:05:14 UTC 2011 i68
>>
>>>
>>>
>>>
>>
>>>>>
>>
>>>
>>>
>>>
>>
>>>>> 4) I had the modem working perfectly in Ubuntu 9.04, but don't remember
>>>>> how
>>
>>>
>>>
>>>
>>
>>>>> I did it. Is it possible that it CAN'T be done in 11.04?!
>>
>>>
>>>
>>>
>>
>>>>>
>>
>>>
>>>
>>>
>>
>>>>> I'm not sure if any of this will be of use to you, but am particularly
>>
>>>
>>>
>>>
>>
>>>>> interested in 4); and is it correct to substitute hsfmodem in 1)? Is 2)
>>>>> an
>>
>>>
>>>
>>>
>>
>>>>> issue? Also would it have been important to reboot at certain points?
>>>>> Should
>>
>>>
>>>
>>>
>>
>>>>> I install a new modem in either beast? I so depend on dial-up! Many
>>>>> thanks!
>>
>>>
>>>
>>>
>>
>>>>>
>>
>>>
>>>
>>>
>>
>>>>> Jeffrey
>>
>>>
>>>
>>>
>>
>>>>>
>>
>>>
>>>
>>>
>>
>>>>> -----Original Message-----
>>
>>>
>>>
>>>
>>
>>>>> From: Antonio Olivares <olivares14031@xxxxxxxxx>
>>
>>>
>>>
>>>
>>
>>>>> To: Jeffrey Cohan <cohanjeffrey@xxxxxxx>
>>
>>>
>>>
>>>
>>
>>>>> Cc: discuss@xxxxxxxxxxxxx
>>
>>>
>>>
>>>
>>
>>>>> Sent: Wed, Aug 24, 2011 7:17 pm
>>
>>>
>>>
>>>
>>
>>>>> Subject: Re: no dial-up: hsfmodem and alsa-driver-linuxant problem?
>>
>>>
>>>
>>>
>>
>>>>>
>>
>>>
>>>
>>>
>>
>>>>>
>>
>>>
>>>
>>>
>>
>>>>>
>>
>>>
>>>
>>>
>>
>>>>>
>>
>>>
>>>
>>>
>>
>>>>> Jeffrey,
>>
>>>
>>>
>>>
>>
>>>>>
>>
>>>
>>>
>>>
>>
>>>>>
>>
>>>
>>>
>>>
>>
>>>>>
>>
>>>
>>>
>>>
>>
>>>>> In the x86_64 bit machine, if you had 32 bit linux installed, it would
>>
>>>
>>>
>>>
>>
>>>>>
>>
>>>
>>>
>>>
>>
>>>>> be a nice opportunity for you to check the modified driver *to see if
>>
>>>
>>>
>>>
>>
>>>>>
>>
>>>
>>>
>>>
>>
>>>>> it would work*, but since it is 64 bit you get the message directly
>>
>>>
>>>
>>>
>>
>>>>>
>>
>>>
>>>
>>>
>>
>>>>> from ModemData.txt
>>
>>>
>>>
>>>
>>
>>>>>
>>
>>>
>>>
>>>
>>
>>>>>
>>
>>>
>>>
>>>
>>
>>>>>
>>
>>>
>>>
>>>
>>
>>>>> There is no agrsm software support for x86_64 systems, through the
>>>>> modem
>>>>> may
>>
>>>
>>>
>>>
>>
>>>>> be
>>
>>>
>>>
>>>
>>
>>>>>
>>
>>>
>>>
>>>
>>
>>>>>  supported on Intel/i386 installations, which do more slowly servce
>>
>>>
>>>
>>>
>>
>>>>>
>>
>>>
>>>
>>>
>>
>>>>> x86_64 processors.
>>
>>>
>>>
>>>
>>
>>>>>
>>
>>>
>>>
>>>
>>
>>>>>
>>
>>>
>>>
>>>
>>
>>>>>
>>
>>>
>>>
>>>
>>
>>>>> * driver
>>
>>>
>>>
>>>
>>
>>>>>
>>
>>>
>>>
>>>
>>
>>>>>
>>>>>
>>>>>
>>>>> http://linmodems.technion.ac.il/packages/ltmodem/11c11040/agrsm-11c11040_20110811_i386.deb
>>
>>>
>>>
>>>
>>
>>>>>
>>
>>>
>>>
>>>
>>
>>>>> + new agrsm tools
>>
>>>
>>>
>>>
>>
>>>>>
>>
>>>
>>>
>>>
>>
>>>>>
>>
>>>
>>>
>>>
>>
>>>>>
>>
>>>
>>>
>>>
>>
>>>>> For the other modem, Jonathan at Linuxant has posted ways to
>>
>>>
>>>
>>>
>>
>>>>>
>>
>>>
>>>
>>>
>>
>>>>> circumvent the errors:
>>
>>>
>>>
>>>
>>
>>>>>
>>
>>>
>>>
>>>
>>
>>>>>
>>
>>>
>>>
>>>
>>
>>>>>
>>
>>>
>>>
>>>
>>
>>>>>
>>>>>
>>>>>
>>>>> http://linmodems.org/cgi-bin/ezmlm-cgi?1:sss:37710:201108:dpmgnpddbcjlkfmlpmin#b
>>
>>>
>>>
>>>
>>
>>>>>
>>
>>>
>>>
>>>
>>
>>>>> <quote>
>>
>>>
>>>
>>>
>>
>>>>>
>>
>>>
>>>
>>>
>>
>>>>> Hi,
>>
>>>
>>>
>>>
>>
>>>>>
>>
>>>
>>>
>>>
>>
>>>>>
>>
>>>
>>>
>>>
>>
>>>>>
>>
>>>
>>>
>>>
>>
>>>>> this is a known build issue with recent kernels, even with the latest
>>
>>>
>>>
>>>
>>
>>>>>
>>
>>>
>>>
>>>
>>
>>>>> release of the driver. A used provided the following workaround to
>>
>>>
>>>
>>>
>>
>>>>>
>>
>>>
>>>
>>>
>>
>>>>> solve it:
>>
>>>
>>>
>>>
>>
>>>>>
>>
>>>
>>>
>>>
>>
>>>>>
>>
>>>
>>>
>>>
>>
>>>>>
>>
>>>
>>>
>>>
>>
>>>>> ---
>>
>>>
>>>
>>>
>>
>>>>>
>>
>>>
>>>
>>>
>>
>>>>> replace DECLARE_MUTEX with DEFINE_SEMAPHORE in:
>>
>>>
>>>
>>>
>>
>>>>>
>>
>>>
>>>
>>>
>>
>>>>> - /usr/lib/hcfpcimodem/modules/osnvm.c
>>
>>>
>>>
>>>
>>
>>>>>
>>
>>>
>>>
>>>
>>
>>>>> - /usr/lib/hcfpcimodem/modules/GPL/serial_cnxt.c
>>
>>>
>>>
>>>
>>
>>>>>
>>
>>>
>>>
>>>
>>
>>>>>
>>
>>>
>>>
>>>
>>
>>>>>
>>
>>>
>>>
>>>
>>
>>>>> replace .ioctl with .compat_ioctl in:
>>
>>>
>>>
>>>
>>
>>>>>
>>
>>>
>>>
>>>
>>
>>>>> - /usr/lib/hcfpcimodem/modules/osdiag.c
>>
>>>
>>>
>>>
>>
>>>>>
>>
>>>
>>>
>>>
>>
>>>>> ---
>>
>>>
>>>
>>>
>>
>>>>>
>>
>>>
>>>
>>>
>>
>>>>>
>>
>>>
>>>
>>>
>>
>>>>>
>>
>>>
>>>
>>>
>>
>>>>> This build problem will be fixed in a future release of the driver.
>>
>>>
>>>
>>>
>>
>>>>>
>>
>>>
>>>
>>>
>>
>>>>>
>>
>>>
>>>
>>>
>>
>>>>>
>>
>>>
>>>
>>>
>>
>>>>> Regards,
>>
>>>
>>>
>>>
>>
>>>>>
>>
>>>
>>>
>>>
>>
>>>>>
>>
>>>
>>>
>>>
>>
>>>>>
>>
>>>
>>>
>>>
>>
>>>>>
>>
>>>
>>>
>>>
>>
>>>>>
>>
>>>
>>>
>>>
>>
>>>>> Jonathan
>>
>>>
>>>
>>>
>>
>>>>>
>>
>>>
>>>
>>>
>>
>>>>> Technical specialist / Linuxant
>>
>>>
>>>
>>>
>>
>>>>>
>>
>>>
>>>
>>>
>>
>>>>> www.linuxant.com
>>
>>>
>>>
>>>
>>
>>>>>
>>
>>>
>>>
>>>
>>
>>>>> support@xxxxxxxxxxxx
>>
>>>
>>>
>>>
>>
>>>>>
>>
>>>
>>>
>>>
>>
>>>>> </quote>
>>
>>>
>>>
>>>
>>
>>>>>
>>
>>>
>>>
>>>
>>
>>>>>
>>
>>>
>>>
>>>
>>
>>>>>
>>
>>>
>>>
>>>
>>
>>>>> So you may try the fixes suggested by Jonathan in the meantime.  Or
>>
>>>
>>>
>>>
>>
>>>>>
>>
>>>
>>>
>>>
>>
>>>>> you have the option to try the driver 11c11040 but on 32 bit linux.
>>
>>>
>>>
>>>
>>
>>>>>
>>
>>>
>>>
>>>
>>
>>>>> Hopefully you can get one of these modems to work.
>>
>>>
>>>
>>>
>>
>>>>>
>>
>>>
>>>
>>>
>>
>>>>>
>>
>>>
>>>
>>>
>>
>>>>>
>>
>>>
>>>
>>>
>>
>>>>> Regards,
>>
>>>
>>>
>>>
>>
>>>>>
>>
>>>
>>>
>>>
>>
>>>>>
>>
>>>
>>>
>>>
>>
>>>>>
>>
>>>
>>>
>>>
>>
>>>>> Antonio
>>
>>>
>>>
>>>
>>
>>>>>
>>
>>>
>>>
>>>
>>
>>>>>
>>
>>>
>>>
>>>
>>
>>>>>
>>
>>>
>>>
>>>
>>
>>>>> On Wed, Aug 24, 2011 at 8:56 PM, Jeffrey Cohan <cohanjeffrey@xxxxxxx>
>>>>> wrote:
>>
>>>
>>>
>>>
>>
>>>>>
>>
>>>
>>>
>>>
>>
>>>>>> I have spent many many hours trying to get dial-up working on two
>>>>>> laptops
>>
>>>
>>>
>>>
>>
>>>>>
>>
>>>
>>>
>>>
>>
>>>>>> and would so appreciate your help. Dial-up on either one would be just
>>
>>>
>>>
>>>
>>
>>>>>> fine.
>>
>>>
>>>
>>>
>>
>>>>>
>>
>>>
>>>
>>>
>>
>>>>>>
>>
>>>
>>>
>>>
>>
>>>>>
>>
>>>
>>>
>>>
>>
>>>>>> I'm assuming it will be impossible on the HP laptop (64-bit) as I
>>>>>> found
>>
>>>
>>>
>>>
>>
>>>>>
>>
>>>
>>>
>>>
>>
>>>>>> this:
>>
>>>
>>>
>>>
>>
>>>>>
>>
>>>
>>>
>>>
>>
>>>>>> "Current support for the 11c11040 modem does NOT exist on a non-x86
>>>>>> system
>>
>>>
>>>
>>>
>>
>>>>>
>>
>>>
>>>
>>>
>>
>>>>>> (e.g. AMD, or x86_64.) This is because there is a proprietary core in
>>>>>> the
>>
>>>
>>>
>>>
>>
>>>>>
>>
>>>
>>>
>>>
>>
>>>>>> code compiled for x86 systems."
>>
>>>
>>>
>>>
>>
>>>>>
>>
>>>
>>>
>>>
>>
>>>>>>
>>
>>>
>>>
>>>
>>
>>>>>
>>
>>>
>>>
>>>
>>
>>>>>> On the VAIO (32-bit) it worked perfectly in an earlier version of
>>>>>> Ubuntu
>>
>>>
>>>
>>>
>>
>>>>>
>>
>>>
>>>
>>>
>>
>>>>>> before upgrading.
>>
>>>
>>>
>>>
>>
>>>>>
>>
>>>
>>>
>>>
>>
>>>>>>
>>
>>>
>>>
>>>
>>
>>>>>
>>
>>>
>>>
>>>
>>
>>>>>> I can't seem to find an appropriate driver at www.linuxant.com for my
>>
>>>
>>>
>>>
>>
>>>>>> Linux
>>
>>>
>>>
>>>
>>
>>>>>
>>
>>>
>>>
>>>
>>
>>>>>> version 2.6.38-11-generic.
>>
>>>
>>>
>>>
>>
>>>>>
>>
>>>
>>>
>>>
>>
>>>>>>
>>
>>>
>>>
>>>
>>
>>>>>
>>
>>>
>>>
>>>
>>
>>>>>> Alsa-driver-linuxant doesn't seem to be properly installed.
>>
>>>
>>>
>>>
>>
>>>>>
>>
>>>
>>>
>>>
>>
>>>>>>
>>
>>>
>>>
>>>
>>
>>>>>
>>
>>>
>>>
>>>
>>
>>>>>> I get this error message:
>>
>>>
>>>
>>>
>>
>>>>>
>>
>>>
>>>
>>>
>>
>>>>>> ERROR: Module build failed!
>>
>>>
>>>
>>>
>>
>>>>>
>>
>>>
>>>
>>>
>>
>>>>>> Please examine the log file
>>
>>>
>>>
>>>
>>
>>>>>> "/etc/hsfmodem/log/buildlog-20110824182445.txt"
>>
>>>
>>>
>>>
>>
>>>>>
>>
>>>
>>>
>>>
>>
>>>>>> to determine why.
>>
>>>
>>>
>>>
>>
>>>>>
>>
>>>
>>>
>>>
>>
>>>>>> dpkg: error processing alsa-driver-linuxant (--configure):
>>
>>>
>>>
>>>
>>
>>>>>
>>
>>>
>>>
>>>
>>
>>>>>>  subprocess installed post-installation script returned error exit
>>>>>> status
>>
>>>
>>>
>>>
>>
>>>>>> 2
>>
>>>
>>>
>>>
>>
>>>>>
>>
>>>
>>>
>>>
>>
>>>>>> Errors were encountered while processing:
>>
>>>
>>>
>>>
>>
>>>>>
>>
>>>
>>>
>>>
>>
>>>>>>  alsa-driver-linuxant
>>
>>>
>>>
>>>
>>
>>>>>
>>
>>>
>>>
>>>
>>
>>>>>> E: Sub-process /usr/bin/dpkg returned an error code (1)
>>
>>>
>>>
>>>
>>
>>>>>
>>
>>>
>>>
>>>
>>
>>>>>> ===============
>>
>>>
>>>
>>>
>>
>>>>>
>>
>>>
>>>
>>>
>>
>>>>>>
>>
>>>
>>>
>>>
>>
>>>>>
>>
>>>
>>>
>>>
>>
>>>>>> Thanks much!
>>
>>>
>>>
>>>
>>
>>>>>
>>
>>>
>>>
>>>
>>
>>>>>>
>>
>>>
>>>
>>>
>>
>>>>>
>>
>>>
>>>
>>>
>>
>>>>>> Jeff
>>
>>>
>>>
>>>
>>
>>>>>
>>
>>>
>>>
>>>
>>
>>>>>>
>>
>>>
>>>
>>>
>>
>>>>>
>>
>>>
>>>
>>>
>>
>>>>>>
>>
>>>
>>>
>>>
>>
>>>>>
>>
>>>
>>>
>>>
>>
>>>>>>
>>
>>>
>>>
>>>
>>
>>>>>
>>
>>>
>>>
>>>
>>
>>>>>
>>
>>>
>>>
>>>
>>
>>>>>
>>
>>>
>>>
>>>
>>
>>>>>
>>
>>>
>>>
>>>
>>
>>>>
>>
>>>
>>>
>>>
>>>
>>>
>>>
>>
>



[Index of Archives]     [Linux Media Development]     [Asterisk]     [DCCP]     [Netdev]     [X.org]     [Xfree86]     [Fedora Women]     [Linux USB]

  Powered by Linux