Re: no dial-up: hsfmodem and alsa-driver-linuxant problem?

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Jeffrey,

I made a BOO-BOO(mistake), instead of uname -a , dmesg | grep 'gcc'
hen gcc --version like

[olivares@acer-aspire-1 ~]$ dmesg | grep 'gcc'
[    0.000000] Linux version 2.6.40-4.fc15.i686
(mockbuild@xxxxxxxxxxxxxxxxxxxxxxxxxxxxx) (gcc version 4.6.0 20110530
(Red Hat 4.6.0-9) (GCC) ) #1 SMP Fri Jul 29 18:54:39 UTC 2011
[olivares@acer-aspire-1 ~]$ gcc --version
gcc (GCC) 4.6.0 20110603 (Red Hat 4.6.0-10)
Copyright (C) 2011 Free Software Foundation, Inc.
This is free software; see the source for copying conditions.  There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.

[olivares@acer-aspire-1 ~]$

Notice that the gcc versions do match :)

You may pursue to try Marv's suggestion linuxant's usb drivers and see
if they work.

Regards,

Antonio

On Sat, Aug 27, 2011 at 1:47 PM, Jeffrey Cohan <cohanjeffrey@xxxxxxx> wrote:
> Antonio, here's what I get - do these correspond?
>
> uname -a
> Linux whiskeybisquit-VGN-N130G 2.6.38-11-generic #48-Ubuntu SMP Fri Jul 29
> 19:05:14 UTC 2011 i686 i686 i386 GNU/Linux
>
> gcc --version
> gcc (Ubuntu/Linaro 4.5.2-8ubuntu4) 4.5.2
> Copyright (C) 2010 Free Software Foundation, Inc.
>
> I'll gladly reinstall anything! and will look at your other options as well.
> Thanks,
>
> Jeffrey
> - - - - - -
>
> Jeffrey,
>
> On Sat, Aug 27, 2011 at 11:42 AM, Jeffrey Cohan <cohanjeffrey@xxxxxxx>
> wrote:
>
>> Good morning Antonio! I found something from you about the USRobotics
>> USR5637 USB modem, and I'm assuming that DIDN'T work out on Ubuntu 11.04?
>> I
>> don't find anything on the web that confirms that any other USB modem does
>> work. Or a replacement internal one for the VAIO?
>>
>> I'm reluctant to install an older Ubuntu version as you suggest Marv as
>> sooner or later it would not be supported, because it would take so much
>> time to go back and forth unless one version can be accessed within
>> another
>> (at home I have only dial-up and use it many times each day) and because
>> of
>> a potential problem with Thunderbird: due to family needs I go between the
>> 2
>> laptops (I can check email via wifi when not at home), must keep my
>> Thunderbird profile on an external drive, and the profile has been
>> severely
>> compromised when accessed through different systems/versions (I'd like to
>> have the latest Ubuntu on both machines, and do need to use both to run
>> ALL
>> of my software). If it were for the occasional fax, this option would be
>> fine.
>>
>
> Maybe you can install an older kernel, for the meantime to give some
> time for a fix.
>
>>
>> So I'll assume that the message:
>> no device detected by hsf driver - HDA modems may require reboot
>> Note: HDA support not compiled in the driver
>>
>> ...leads me too a dead end. On both computers, alas.
>>
>> On this page:
>> https://help.ubuntu.com/community/DialupModemHowto/Conexant
>> shouldn't this link:
>> For Ubuntu 11.04 (Natty Narwhal): You can follow the steps on this thread.
>> :
>> http://ubuntuforums.org/showthread.php?t=1781268
>> be removed? or why would it not work in my case?
>>
>
> Might be due to some kernel problem* , kernel devel package/kernel
> headers, some type of mismatch when I see the errors in the messages
> that you have sent us:
>
> <quote>
>    alsa-driver-linuxant_1.0.23.1_all.deb:
> ----in terminal:
> Building modules for the 2.6.38-11-generic kernel, please wait... done.
> ERROR: Build failed. Please review the build log at
> /tmp/alsa-driver-linuxant.26528.log
> dpkg: error processing alsa-driver-linuxant (--install):
>  subprocess installed post-installation script returned error exit status 2
> ----in log file:
> checking for GCC version... Kernel compiler:  Used compiler: gcc
> (Ubuntu/Linaro 4.5.2-8ubuntu4) 4.5.2
> *** NO PREDEFINED KERNEL COMPILER IS DETECTED
> *** Assuming the same compiler is used with the current system compiler.
> *** Please make sure that the same compiler version was used for
> building kernel.
> and later...
> /usr/lib/alsa-driver-linuxant/acore/pcm_native.c: In function
> ‘snd_pcm_hw_params’:
> /usr/lib/alsa-driver-linuxant/acore/pcm_native.c:489:2: error:
> implicit declaration of function ‘pm_qos_remove_requirement’
> /usr/lib/alsa-driver-linuxant/acore/pcm_native.c:492:3: error:
> implicit declaration of function ‘pm_qos_add_requirement’
> make[3]: *** [/usr/lib/alsa-driver-linuxant/acore/pcm_native.o] Error 1
> make[2]: *** [/usr/lib/alsa-driver-linuxant/acore] Error 2
> make[1]: *** [_module_/usr/lib/alsa-driver-linuxant] Error 2
> make[1]: Leaving directory `/usr/src/linux-headers-2.6.38-11-generic'
> make: *** [compile] Error 2
> </quote>
>
> This line ``*** NO PREDEFINED KERNEL COMPILER IS DETECTED
> *** Assuming the same compiler is used with the current system compiler.
> *** Please make sure that the same compiler version was used for
> building kernel.
> '' is the one that makes me believe that the running kernel is not the
> same gcc as the one in the system.  In this case and in others it is
> important that the running kernel and the gcc be the same so that no
> errors occurs.  If you can you can confirm
>
> run
> $ uname -a
> and
> $ gcc --version
>
> and that may tell us why things are not working.  To get it working,
> the kernel and the gcc must be the same.
>
> If you want and have access to a livecd like
> Knoppix/Slax/Porteus/Puppy/..., you can use some of these at least to
> get a connection to internet via dialup.  Puppy in many cases has out
> of box support for many winmodems.  In porteus I have successfully
> built some buildscripts to build a module that will make the modems
> work.  Some modems except the hsf/hcf modems since these are
> proprietary, except for the 14 kbps one but that one many people would
> get mad in the case that it is built(they would want full speed, and
> it is a difficult to accomodate to many people*).  One person built
> such a module for slax, but I have no status for it as Slax has not
> been updated for a while.  Without screwing up your running system
> and/or installing again you may try out one livecd(if you can get one)
> and try the driver and see if you can make the modem work and connect
> via dialup or install a kernel that matches gcc and try the fixes
> again.
>
> * unless you have a Dell machine, then you can use the oem drivers and
> you can get full speed on the modem.
>
> If you have a cell phone, you may also use it as a modem to connect to
> internet.  In ModemData.txt, there is a report you can see :
>
> If a cellphone is not detected, see
> http://ubuntuforums.org/archive/index.php/t-878554.html
> A sample report is:
> http://linmodems.technion.ac.il/bigarch/archive-nineth/msg00578.html
>
> Don't get discouraged, a little bit of patience can go a long way.  I
> almost forgot, you can also virtualize a version of linux and with an
> older kernel you can run an older installation along with your current
> one and have a working dialup connection on that one with a working
> driver.  These are things you can take a look at.
>
> When there were no fixes for smartlink modem after kernel 2.6.30/31, I
> used Slax livecd with older kernel to access the internet and then
> later the fixes came along thanks to a person that figured things out.
>  You may try to do something similar and not be left without internet
> for a fix to come in the meantime.  Hang in there!  You can do it.
>
> Regards,
>
>
>
> Antonio
>
>>
>> I've much appreciated your advice - thanks!
>>
>> Jeff
>>
>>
>>
>> -----Original Message-----
>> From: cohanjeffrey@xxxxxxx
>> To: olivares14031@xxxxxxxxx; marvin.stodolsky@xxxxxxxxx;
>> discuss@xxxxxxxxxxxxx; support@xxxxxxxxxxxx
>> Sent: Fri, Aug 26, 2011 7:23 pm
>> Subject: Re: no dial-up: hsfmodem and alsa-driver-linuxant problem?
>>
>> Thank you Antonio and Marv - really appreciate it!
>>
>> After another full day I'll try to take your advice tomorrow Marv, and it
>> seems from Ganton at
>> http://ubuntuforums.org/showthread.php?t=1597605&page=4
>> that the most recent kernel that will work will be Ubuntu 10.10. Or could
>> I
>> buy an external modem on ebay that is said to work on Linux? If you have
>> further ideas after reading what follows (especially, re "Warning: no
>> device
>> detected by hsf driver - HDA modems may require reboot" and "Note: HDA
>> support not compiled in the driver"), I would be most grateful!
>>
>> Today I removed alsa-driver-linuxant and installed
>> hsfmodem-7.80.02.06full,
>> and got code similar to yours Antonio.
>>
>> But an "hsfconfig" resulted in (excerpts):
>> Conexant HSF softmodem driver, version 7.80.02.06full
>> When reporting a problem for the first time, please send
>> us the file generated by "hsfconfig --dumpdiag".
>> No pre-built modules for: Ubuntu-11.04 linux-2.6.38-11-generic i686-SMP
>> ...and the punchline:
>> ERROR: Module build failed!
>> - - -
>> buildlog excerpts:
>> /usr/lib/hsfmodem/modules/osnvm.c:408:8: error: 'MUTEX' undeclared here
>> (not
>> in a function)
>> make[2]: *** [/usr/lib/hsfmodem/modules/osnvm.o] Error 1
>> make[1]: *** [_module_/usr/lib/hsfmodem/modules] Error 2
>>
>> so I again did this:
>> replace DECLARE_MUTEX with DEFINE_SEMAPHORE in:
>> - /usr/lib/hcfpcimodem/modules/osnvm.c
>> - /usr/lib/hcfpcimodem/modules/GPL/serial_cnxt.c
>> replace .ioctl with .compat_ioctl in:
>> - /usr/lib/hcfpcimodem/modules/osdiag.c
>>
>> and "hsfconfig" got...
>> Warning: no device detected by hsf driver - HDA modems may require reboot
>> Note: HDA support not compiled in the driver
>>
>> then I ran everything (whew!) from "Ganton's Avatar" at
>> http://ubuntuforums.org/showthread.php?t=1781268
>> and again got exactly the same message with "hsfconfig"
>> (issue not [SOLVED] as stated)
>>
>> with another hsfconfig, it asked
>> Warning: existing driver modules found under:
>>     /lib/modules/2.6.38-11-generic/
>> Would you like to keep using them? [no]
>> ...and I pressed [enter]
>> but got similar results
>> -  -  - (end of exploits for the day, besides a little blackberry
>> picking)-
>> - - - - -
>>
>> Thanks again for helping,
>>
>> Jeff
>>
>>
>>
>> -----Original Message-----
>> From: Antonio Olivares <olivares14031@xxxxxxxxx>
>> To: cohanjeffrey@xxxxxxx
>> Cc: discuss@xxxxxxxxxxxxx; Linuxant support (Jonathan)
>> <support@xxxxxxxxxxxx>; Marvin Stodolsky <marvin.stodolsky@xxxxxxxxx>
>> Sent: Thu, Aug 25, 2011 6:56 pm
>> Subject: Re: no dial-up: hsfmodem and alsa-driver-linuxant problem?
>>
>>
>>
>>
>> Jeffrey,
>>
>>
>>
>>
>>
>>
>>
>> Something is strange.  I try the package (hsf) and it runs for me, I
>>
>>
>>
>> can't find errors:
>>
>>
>>
>>
>>
>>
>>
>> [olivares@acer-aspire-1 hsfmodem-7.80.02.06full]$ su -c 'make install'
>>
>>
>>
>> Password:
>>
>>
>>
>> make[1]: Entering directory
>>
>>
>>
>> `/home/olivares/Downloads/hsfmodem-7.80.02.06full/nvm'
>>
>>
>>
>> mkdir -m 755 -p cvt
>>
>>
>>
>> sed -e 's!@CNXTLINUXVERSION@!7.80.02.06full!g' -e
>>
>>
>>
>> 's!@CNXTTARGET@!hsf!g' -e 's!@CNXTDRVDSC@!Conexant HSF softmodem!g' <
>>
>>
>>
>> inf/hsfpcibasic2.inf | ./cvtinf.pl cvt/hsfpcibasic2; if [ -n
>>
>>
>>
>> "inf/hsf.cty" ]; then ./cvtinf.pl cvt/hsfpcibasic2 < "inf/hsf.cty";
>>
>>
>>
>> else true; fi
>>
>>
>>
>> (cd cvt/hsfpcibasic2/Region && grep -v -l '*' *NAME | sed -e 's/^0//'
>>
>>
>>
>> -e 's/^0//' -e 's/_NAME$//' | tr '
>> ' ',' | sed -e 's/,$//' -e
>>
>>
>>
>> 's/^/"/' -e 's/$/"/' ; echo "") > cvt/hsfpcibasic2/COUNTRY_CODE_LIST
>>
>>
>>
>> sed -e 's!@CNXTLINUXVERSION@!7.80.02.06full!g' -e
>>
>>
>>
>> 's!@CNXTTARGET@!hsf!g' -e 's!@CNXTDRVDSC@!Conexant HSF softmodem!g' <
>>
>>
>>
>> inf/hsfpcibasic2smart.inf | ./cvtinf.pl cvt/hsfpcibasic2smart; if [ -n
>>
>>
>>
>> "" ]; then ./cvtinf.pl cvt/hsfpcibasic2smart < ""; else true; fi
>>
>>
>>
>> if [ -d cvt/hsfpcibasic2/Profile ]; then ln -sf
>>
>>
>>
>> ../hsfpcibasic2/Profile cvt/hsfpcibasic2smart/.; else true; fi
>>
>>
>>
>> ln -sf ../hsfpcibasic2/Region cvt/hsfpcibasic2smart/.
>>
>>
>>
>> (cd cvt/hsfpcibasic2smart/Region && grep -v -l '*' *NAME | sed -e
>>
>>
>>
>> 's/^0//' -e 's/^0//' -e 's/_NAME$//' | tr '
>> ' ',' | sed -e 's/,$//'
>>
>>
>>
>> -e 's/^/"/' -e 's/$/"/' ; echo "") >
>>
>>
>>
>> cvt/hsfpcibasic2smart/COUNTRY_CODE_LIST
>>
>>
>>
>> sed -e 's!@CNXTLINUXVERSION@!7.80.02.06full!g' -e
>>
>>
>>
>> 's!@CNXTTARGET@!hsf!g' -e 's!@CNXTDRVDSC@!Conexant HSF softmodem!g' <
>>
>>
>>
>> inf/hsfpcibasic2hsfi.inf | ./cvtinf.pl cvt/hsfpcibasic2hsfi; if [ -n
>>
>>
>>
>> "inf/hsf.cty" ]; then ./cvtinf.pl cvt/hsfpcibasic2hsfi <
>>
>>
>>
>> "inf/hsf.cty"; else true; fi
>>
>>
>>
>> rm -rf cvt/hsfpcibasic2hsfi/Region
>>
>>
>>
>> ln -sf ../hsfpcibasic2/Region cvt/hsfpcibasic2hsfi/.
>>
>>
>>
>> (cd cvt/hsfpcibasic2hsfi/Region && grep -v -l '*' *NAME | sed -e
>>
>>
>>
>> 's/^0//' -e 's/^0//' -e 's/_NAME$//' | tr '
>> ' ',' | sed -e 's/,$//'
>>
>>
>>
>> -e 's/^/"/' -e 's/$/"/' ; echo "") >
>>
>>
>>
>> cvt/hsfpcibasic2hsfi/COUNTRY_CODE_LIST
>>
>>
>>
>> sed -e 's!@CNXTLINUXVERSION@!7.80.02.06full!g' -e
>>
>>
>>
>> 's!@CNXTTARGET@!hsf!g' -e 's!@CNXTDRVDSC@!Conexant HSF softmodem!g' <
>>
>>
>>
>> inf/hsfpcibasic2bry.inf | ./cvtinf.pl cvt/hsfpcibasic2bry; if [ -n
>>
>>
>>
>> "inf/hsf.cty" ]; then ./cvtinf.pl cvt/hsfpcibasic2bry < "inf/hsf.cty";
>>
>>
>>
>> else true; fi
>>
>>
>>
>> rm -rf cvt/hsfpcibasic2bry/Region
>>
>>
>>
>> ln -sf ../hsfpcibasic2/Region cvt/hsfpcibasic2bry/.
>>
>>
>>
>> (cd cvt/hsfpcibasic2bry/Region && grep -v -l '*' *NAME | sed -e
>>
>>
>>
>> 's/^0//' -e 's/^0//' -e 's/_NAME$//' | tr '
>> ' ',' | sed -e 's/,$//'
>>
>>
>>
>> -e 's/^/"/' -e 's/$/"/' ; echo "") >
>>
>>
>>
>> cvt/hsfpcibasic2bry/COUNTRY_CODE_LIST
>>
>>
>>
>> sed -e 's!@CNXTLINUXVERSION@!7.80.02.06full!g' -e
>>
>>
>>
>> 's!@CNXTTARGET@!hsf!g' -e 's!@CNXTDRVDSC@!Conexant HSF softmodem!g' <
>>
>>
>>
>> inf/hsfpcibasic3.inf | ./cvtinf.pl cvt/hsfpcibasic3; if [ -n
>>
>>
>>
>> "inf/hsf.cty" ]; then ./cvtinf.pl cvt/hsfpcibasic3 < "inf/hsf.cty";
>>
>>
>>
>> else true; fi
>>
>>
>>
>> rm -rf cvt/hsfpcibasic3/Region
>>
>>
>>
>> ln -sf ../hsfpcibasic2/Region cvt/hsfpcibasic3/.
>>
>>
>>
>> (cd cvt/hsfpcibasic3/Region && grep -v -l '*' *NAME | sed -e 's/^0//'
>>
>>
>>
>> -e 's/^0//' -e 's/_NAME$//' | tr '
>> ' ',' | sed -e 's/,$//' -e
>>
>>
>>
>> 's/^/"/' -e 's/$/"/' ; echo "") > cvt/hsfpcibasic3/COUNTRY_CODE_LIST
>>
>>
>>
>> sed -e 's!@CNXTLINUXVERSION@!7.80.02.06full!g' -e
>>
>>
>>
>> 's!@CNXTTARGET@!hsf!g' -e 's!@CNXTDRVDSC@!Conexant HSF softmodem!g' <
>>
>>
>>
>> inf/hsfmc97ich.inf | ./cvtinf.pl cvt/hsfmc97; if [ -n "" ]; then
>>
>>
>>
>> ./cvtinf.pl cvt/hsfmc97 < ""; else true; fi
>>
>>
>>
>> rm -f mc97/HW_ADAPTER_TYPE
>>
>>
>>
>> ln -sf ../hsfpcibasic2smart/Profile cvt/hsfmc97/.
>>
>>
>>
>> ln -sf ../hsfpcibasic2smart/Region cvt/hsfmc97/.
>>
>>
>>
>> (cd cvt/hsfmc97/Region && grep -v -l '*' *NAME | sed -e 's/^0//' -e
>>
>>
>>
>> 's/^0//' -e 's/_NAME$//' | tr '
>> ' ',' | sed -e 's/,$//' -e 's/^/"/'
>>
>>
>>
>> -e 's/$/"/' ; echo "") > cvt/hsfmc97/COUNTRY_CODE_LIST
>>
>>
>>
>> ln -sf `basename cvt/hsfmc97` cvt/hsfmc97ali
>>
>>
>>
>> ln -sf `basename cvt/hsfmc97` cvt/hsfmc97ati
>>
>>
>>
>> ln -sf `basename cvt/hsfmc97` cvt/hsfmc97ich
>>
>>
>>
>> ln -sf `basename cvt/hsfmc97` cvt/hsfmc97sis
>>
>>
>>
>> ln -sf `basename cvt/hsfmc97` cvt/hsfmc97via
>>
>>
>>
>> sed -e 's!@CNXTLINUXVERSION@!7.80.02.06full!g' -e
>>
>>
>>
>> 's!@CNXTTARGET@!hsf!g' -e 's!@CNXTDRVDSC@!Conexant HSF softmodem!g' <
>>
>>
>>
>> inf/hsfcadmus2.inf | ./cvtinf.pl cvt/hsfcadmus2; if [ -n "" ]; then
>>
>>
>>
>> ./cvtinf.pl cvt/hsfcadmus2 < ""; else true; fi
>>
>>
>>
>> rm -f cadmus2/HW_ADAPTER_TYPE
>>
>>
>>
>> ln -sf ../hsfpcibasic2/Profile cvt/hsfcadmus2/.
>>
>>
>>
>> ln -sf ../hsfpcibasic2/Region cvt/hsfcadmus2/.
>>
>>
>>
>> (cd cvt/hsfcadmus2/Region && grep -v -l '*' *NAME | sed -e 's/^0//'
>>
>>
>>
>> -e 's/^0//' -e 's/_NAME$//' | tr '
>> ' ',' | sed -e 's/,$//' -e
>>
>>
>>
>> 's/^/"/' -e 's/$/"/' ; echo "") > cvt/hsfcadmus2/COUNTRY_CODE_LIST
>>
>>
>>
>> sed -e 's!@CNXTLINUXVERSION@!7.80.02.06full!g' -e
>>
>>
>>
>> 's!@CNXTTARGET@!hsf!g' -e 's!@CNXTDRVDSC@!Conexant HSF softmodem!g' <
>>
>>
>>
>> inf/hsfcadmus2smart.inf | ./cvtinf.pl cvt/hsfcadmus2smart; if [ -n ""
>>
>>
>>
>> ]; then ./cvtinf.pl cvt/hsfcadmus2smart < ""; else true; fi
>>
>>
>>
>> rm -f cadmus2smart/HW_ADAPTER_TYPE
>>
>>
>>
>> ln -sf ../hsfpcibasic2smart/Profile cvt/hsfcadmus2smart/.
>>
>>
>>
>> ln -sf ../hsfpcibasic2smart/Region cvt/hsfcadmus2smart/.
>>
>>
>>
>> (cd cvt/hsfcadmus2smart/Region && grep -v -l '*' *NAME | sed -e
>>
>>
>>
>> 's/^0//' -e 's/^0//' -e 's/_NAME$//' | tr '
>> ' ',' | sed -e 's/,$//'
>>
>>
>>
>> -e 's/^/"/' -e 's/$/"/' ; echo "") >
>>
>>
>>
>> cvt/hsfcadmus2smart/COUNTRY_CODE_LIST
>>
>>
>>
>> sed -e 's!@CNXTLINUXVERSION@!7.80.02.06full!g' -e
>>
>>
>>
>> 's!@CNXTTARGET@!hsf!g' -e 's!@CNXTDRVDSC@!Conexant HSF softmodem!g' <
>>
>>
>>
>> inf/hsfhda.inf | ./cvtinf.pl cvt/hsfhda; if [ -n "" ]; then
>>
>>
>>
>> ./cvtinf.pl cvt/hsfhda < ""; else true; fi
>>
>>
>>
>> rm -f hda/HW_ADAPTER_TYPE
>>
>>
>>
>> ln -sf ../hsfpcibasic2smart/Profile cvt/hsfhda/.
>>
>>
>>
>> ln -sf ../hsfpcibasic2smart/Region cvt/hsfhda/.
>>
>>
>>
>> (cd cvt/hsfhda/Region && grep -v -l '*' *NAME | sed -e 's/^0//' -e
>>
>>
>>
>> 's/^0//' -e 's/_NAME$//' | tr '
>> ' ',' | sed -e 's/,$//' -e 's/^/"/'
>>
>>
>>
>> -e 's/$/"/' ; echo "") > cvt/hsfhda/COUNTRY_CODE_LIST
>>
>>
>>
>> cd cvt && find . -type f ! -empty -exec md5sum {} ';' | sort |
>>
>>
>>
>> while read sum file ; do
>>
>>
>>
>>     if [ "$sum" = "$prevsum" ] && cmp -s "$file" "$prevfile"; then
>>
>>
>>
>>         rm -f "$file";
>>
>>
>>
>>         if ! ln "$prevfile" "$file"; then
>>
>>
>>
>>             echo 2>&1 "$0: ln FAILED - recreate $file based on $prevfile";
>>
>>
>>
>>             exit 1;
>>
>>
>>
>>         fi;
>>
>>
>>
>>     else
>>
>>
>>
>>         prevsum="$sum";
>>
>>
>>
>>         prevfile="$file";
>>
>>
>>
>>     fi;
>>
>>
>>
>> done
>>
>>
>>
>> touch cvt/.linksame
>>
>>
>>
>> mkdir -m 755 -p /etc/hsfmodem/nvm
>>
>>
>>
>> cd cvt && (find  hsfpcibasic2  hsfpcibasic2smart  hsfpcibasic2hsfi
>>
>>
>>
>> hsfpcibasic2bry  hsfpcibasic3  hsfmc97  hsfmc97ali  hsfmc97ati
>>
>>
>>
>> hsfmc97ich  hsfmc97sis  hsfmc97via  hsfcadmus2  hsfcadmus2smart
>>
>>
>>
>> hsfhda | cpio -pdmu /etc/hsfmodem/nvm)
>>
>>
>>
>> 127 blocks
>>
>>
>>
>> make[1]: Leaving directory
>>
>>
>>
>> `/home/olivares/Downloads/hsfmodem-7.80.02.06full/nvm'
>>
>>
>>
>> make[1]: Entering directory
>>
>>
>>
>> `/home/olivares/Downloads/hsfmodem-7.80.02.06full/scripts'
>>
>>
>>
>> sed
>>
>>
>>
>>     -e "s!@DATE@!`date "+%a, %d %b %Y %T %z"`!g"
>>
>>
>>
>>     -e 's!@CNXTDRIVER@!hsf!g'
>>
>>
>>
>>     -e 's!@CNXTDRVDSC@!Conexant HSF softmodem!g'
>>
>>
>>
>>     -e 's!@CNXTTARGET@!hsf!g'
>>
>>
>>
>>     -e 's!@CNXTARCH@!i386!g'
>>
>>
>>
>>     -e 's!@CNXTSERDEV@!HSF!g'
>>
>>
>>
>>     -e 's!@CNXTMAXMDM@!8!g'
>>
>>
>>
>>     -e 's!@CNXTETCDIR@!/etc/hsfmodem!g'
>>
>>
>>
>>     -e 's!@CNXTLIBDIR@!/usr/lib/hsfmodem!g'
>>
>>
>>
>>     -e 's!@CNXTSERIALMAJOR@!240!g'
>>
>>
>>
>>     -e 's!@CNXTCALOUTMAJOR@!241!g'
>>
>>
>>
>>     -e 's!@CNXTSERIALMINOR@!64!g'
>>
>>
>>
>>     -e 's!@CNXTDCPMAJOR@!242!g'
>>
>>
>>
>>     -e 's!@CNXTDIAGMAJOR@!243!g'
>>
>>
>>
>>     -e 's!@CNXTDIAGDMPMINOR@!255!g'
>>
>>
>>
>>     -e 's!@CNXTSCRMAJOR@!244!g'
>>
>>
>>
>>     -e 's!@CNXTSBINDIR@!/usr/sbin!g'
>>
>>
>>
>>     -e 's!@CNXTNVMDIR@!/etc/hsfmodem/nvm!g'
>>
>>
>>
>>     -e 's!@CNXTLINUXVERSION@!7.80.02.06full!g'
>>
>>
>>
>>     -e 's!@CNXTLINUX_REL@!1!g'
>>
>>
>>
>>     -e 's!@CNXTLINUXRPM_REL@!1!g'
>>
>>
>>
>>     -e 's!@CNXTLINUXDEB_REL@!1!g'
>>
>>
>>
>>     -e 's!@CNXTMODS@!hsfpcibasic2 hsfpcibasic3 hsfmc97ich hsfmc97via
>>
>>
>>
>> hsfmc97ali hsfmc97ati hsfmc97sis hsfusbcd2 snd_hda_codec_hsfmodem
>>
>>
>>
>> hsfhda hsfsoar hsfserial hsfengine hsfosspec!g'
>>
>>
>>
>>     -e
>>
>> 's!@PATCHERURL@!http://www.linuxant.com/drivers/hsf/full/archive/patches!g'
>>
>>
>>
>>
>>
>>
>>
>>     -e
>>
>> 's!@PATCHERURLUSER@!http://www.linuxant.com/drivers/hsf/downloads-patches.php!g'
>>
>>
>>
>>
>>
>>
>>
>>     -e "s!@BLAM_SUPPORT@!`test ! "" = yes; echo $?`!g"
>>
>>
>>
>>     -e "s!@SCR_SUPPORT@!`test ! "" = yes; echo $?`!g"
>>
>>
>>
>>     -e "s!@DMP_SUPPORT@!`test -z ""; echo $?`!g"
>>
>>
>>
>>     < patcher.in > patcher
>>
>>
>>
>> chmod --reference=patcher.in patcher
>>
>>
>>
>> ln -s cnxtconfig.in hsfconfig.in
>>
>>
>>
>> sed
>>
>>
>>
>>     -e "s!@DATE@!`date "+%a, %d %b %Y %T %z"`!g"
>>
>>
>>
>>     -e 's!@CNXTDRIVER@!hsf!g'
>>
>>
>>
>>     -e 's!@CNXTDRVDSC@!Conexant HSF softmodem!g'
>>
>>
>>
>>     -e 's!@CNXTTARGET@!hsf!g'
>>
>>
>>
>>     -e 's!@CNXTARCH@!i386!g'
>>
>>
>>
>>     -e 's!@CNXTSERDEV@!HSF!g'
>>
>>
>>
>>     -e 's!@CNXTMAXMDM@!8!g'
>>
>>
>>
>>     -e 's!@CNXTETCDIR@!/etc/hsfmodem!g'
>>
>>
>>
>>     -e 's!@CNXTLIBDIR@!/usr/lib/hsfmodem!g'
>>
>>
>>
>>     -e 's!@CNXTSERIALMAJOR@!240!g'
>>
>>
>>
>>     -e 's!@CNXTCALOUTMAJOR@!241!g'
>>
>>
>>
>>     -e 's!@CNXTSERIALMINOR@!64!g'
>>
>>
>>
>>     -e 's!@CNXTDCPMAJOR@!242!g'
>>
>>
>>
>>     -e 's!@CNXTDIAGMAJOR@!243!g'
>>
>>
>>
>>     -e 's!@CNXTDIAGDMPMINOR@!255!g'
>>
>>
>>
>>     -e 's!@CNXTSCRMAJOR@!244!g'
>>
>>
>>
>>     -e 's!@CNXTSBINDIR@!/usr/sbin!g'
>>
>>
>>
>>     -e 's!@CNXTNVMDIR@!/etc/hsfmodem/nvm!g'
>>
>>
>>
>>     -e 's!@CNXTLINUXVERSION@!7.80.02.06full!g'
>>
>>
>>
>>     -e 's!@CNXTLINUX_REL@!1!g'
>>
>>
>>
>>     -e 's!@CNXTLINUXRPM_REL@!1!g'
>>
>>
>>
>>     -e 's!@CNXTLINUXDEB_REL@!1!g'
>>
>>
>>
>>     -e 's!@CNXTMODS@!hsfpcibasic2 hsfpcibasic3 hsfmc97ich hsfmc97via
>>
>>
>>
>> hsfmc97ali hsfmc97ati hsfmc97sis hsfusbcd2 snd_hda_codec_hsfmodem
>>
>>
>>
>> hsfhda hsfsoar hsfserial hsfengine hsfosspec!g'
>>
>>
>>
>>     -e
>>
>> 's!@PATCHERURL@!http://www.linuxant.com/drivers/hsf/full/archive/patches!g'
>>
>>
>>
>>
>>
>>
>>
>>     -e
>>
>> 's!@PATCHERURLUSER@!http://www.linuxant.com/drivers/hsf/downloads-patches.php!g'
>>
>>
>>
>>
>>
>>
>>
>>     -e "s!@BLAM_SUPPORT@!`test ! "" = yes; echo $?`!g"
>>
>>
>>
>>     -e "s!@SCR_SUPPORT@!`test ! "" = yes; echo $?`!g"
>>
>>
>>
>>     -e "s!@DMP_SUPPORT@!`test -z ""; echo $?`!g"
>>
>>
>>
>>     < hsfconfig.in > hsfconfig
>>
>>
>>
>> chmod --reference=hsfconfig.in hsfconfig
>>
>>
>>
>> ln -s cnxtstop.in hsfstop.in
>>
>>
>>
>> sed
>>
>>
>>
>>     -e "s!@DATE@!`date "+%a, %d %b %Y %T %z"`!g"
>>
>>
>>
>>     -e 's!@CNXTDRIVER@!hsf!g'
>>
>>
>>
>>     -e 's!@CNXTDRVDSC@!Conexant HSF softmodem!g'
>>
>>
>>
>>     -e 's!@CNXTTARGET@!hsf!g'
>>
>>
>>
>>     -e 's!@CNXTARCH@!i386!g'
>>
>>
>>
>>     -e 's!@CNXTSERDEV@!HSF!g'
>>
>>
>>
>>     -e 's!@CNXTMAXMDM@!8!g'
>>
>>
>>
>>     -e 's!@CNXTETCDIR@!/etc/hsfmodem!g'
>>
>>
>>
>>     -e 's!@CNXTLIBDIR@!/usr/lib/hsfmodem!g'
>>
>>
>>
>>     -e 's!@CNXTSERIALMAJOR@!240!g'
>>
>>
>>
>>     -e 's!@CNXTCALOUTMAJOR@!241!g'
>>
>>
>>
>>     -e 's!@CNXTSERIALMINOR@!64!g'
>>
>>
>>
>>     -e 's!@CNXTDCPMAJOR@!242!g'
>>
>>
>>
>>     -e 's!@CNXTDIAGMAJOR@!243!g'
>>
>>
>>
>>     -e 's!@CNXTDIAGDMPMINOR@!255!g'
>>
>>
>>
>>     -e 's!@CNXTSCRMAJOR@!244!g'
>>
>>
>>
>>     -e 's!@CNXTSBINDIR@!/usr/sbin!g'
>>
>>
>>
>>     -e 's!@CNXTNVMDIR@!/etc/hsfmodem/nvm!g'
>>
>>
>>
>>     -e 's!@CNXTLINUXVERSION@!7.80.02.06full!g'
>>
>>
>>
>>     -e 's!@CNXTLINUX_REL@!1!g'
>>
>>
>>
>>     -e 's!@CNXTLINUXRPM_REL@!1!g'
>>
>>
>>
>>     -e 's!@CNXTLINUXDEB_REL@!1!g'
>>
>>
>>
>>     -e 's!@CNXTMODS@!hsfpcibasic2 hsfpcibasic3 hsfmc97ich hsfmc97via
>>
>>
>>
>> hsfmc97ali hsfmc97ati hsfmc97sis hsfusbcd2 snd_hda_codec_hsfmodem
>>
>>
>>
>> hsfhda hsfsoar hsfserial hsfengine hsfosspec!g'
>>
>>
>>
>>     -e
>>
>> 's!@PATCHERURL@!http://www.linuxant.com/drivers/hsf/full/archive/patches!g'
>>
>>
>>
>>
>>
>>
>>
>>     -e
>>
>> 's!@PATCHERURLUSER@!http://www.linuxant.com/drivers/hsf/downloads-patches.php!g'
>>
>>
>>
>>
>>
>>
>>
>>     -e "s!@BLAM_SUPPORT@!`test ! "" = yes; echo $?`!g"
>>
>>
>>
>>     -e "s!@SCR_SUPPORT@!`test ! "" = yes; echo $?`!g"
>>
>>
>>
>>     -e "s!@DMP_SUPPORT@!`test -z ""; echo $?`!g"
>>
>>
>>
>>     < hsfstop.in > hsfstop
>>
>>
>>
>> chmod --reference=hsfstop.in hsfstop
>>
>>
>>
>> ln -s cnxtmodconflicts.in hsfmodconflicts.in
>>
>>
>>
>> sed
>>
>>
>>
>>     -e "s!@DATE@!`date "+%a, %d %b %Y %T %z"`!g"
>>
>>
>>
>>     -e 's!@CNXTDRIVER@!hsf!g'
>>
>>
>>
>>     -e 's!@CNXTDRVDSC@!Conexant HSF softmodem!g'
>>
>>
>>
>>     -e 's!@CNXTTARGET@!hsf!g'
>>
>>
>>
>>     -e 's!@CNXTARCH@!i386!g'
>>
>>
>>
>>     -e 's!@CNXTSERDEV@!HSF!g'
>>
>>
>>
>>     -e 's!@CNXTMAXMDM@!8!g'
>>
>>
>>
>>     -e 's!@CNXTETCDIR@!/etc/hsfmodem!g'
>>
>>
>>
>>     -e 's!@CNXTLIBDIR@!/usr/lib/hsfmodem!g'
>>
>>
>>
>>     -e 's!@CNXTSERIALMAJOR@!240!g'
>>
>>
>>
>>     -e 's!@CNXTCALOUTMAJOR@!241!g'
>>
>>
>>
>>     -e 's!@CNXTSERIALMINOR@!64!g'
>>
>>
>>
>>     -e 's!@CNXTDCPMAJOR@!242!g'
>>
>>
>>
>>     -e 's!@CNXTDIAGMAJOR@!243!g'
>>
>>
>>
>>     -e 's!@CNXTDIAGDMPMINOR@!255!g'
>>
>>
>>
>>     -e 's!@CNXTSCRMAJOR@!244!g'
>>
>>
>>
>>     -e 's!@CNXTSBINDIR@!/usr/sbin!g'
>>
>>
>>
>>     -e 's!@CNXTNVMDIR@!/etc/hsfmodem/nvm!g'
>>
>>
>>
>>     -e 's!@CNXTLINUXVERSION@!7.80.02.06full!g'
>>
>>
>>
>>     -e 's!@CNXTLINUX_REL@!1!g'
>>
>>
>>
>>     -e 's!@CNXTLINUXRPM_REL@!1!g'
>>
>>
>>
>>     -e 's!@CNXTLINUXDEB_REL@!1!g'
>>
>>
>>
>>     -e 's!@CNXTMODS@!hsfpcibasic2 hsfpcibasic3 hsfmc97ich hsfmc97via
>>
>>
>>
>> hsfmc97ali hsfmc97ati hsfmc97sis hsfusbcd2 snd_hda_codec_hsfmodem
>>
>>
>>
>> hsfhda hsfsoar hsfserial hsfengine hsfosspec!g'
>>
>>
>>
>>     -e
>>
>> 's!@PATCHERURL@!http://www.linuxant.com/drivers/hsf/full/archive/patches!g'
>>
>>
>>
>>
>>
>>
>>
>>     -e
>>
>> 's!@PATCHERURLUSER@!http://www.linuxant.com/drivers/hsf/downloads-patches.php!g'
>>
>>
>>
>>
>>
>>
>>
>>     -e "s!@BLAM_SUPPORT@!`test ! "" = yes; echo $?`!g"
>>
>>
>>
>>     -e "s!@SCR_SUPPORT@!`test ! "" = yes; echo $?`!g"
>>
>>
>>
>>     -e "s!@DMP_SUPPORT@!`test -z ""; echo $?`!g"
>>
>>
>>
>>     < hsfmodconflicts.in > hsfmodconflicts
>>
>>
>>
>> chmod --reference=hsfmodconflicts.in hsfmodconflicts
>>
>>
>>
>> ln -s cnxtdcpd.in hsfdcpd.in
>>
>>
>>
>> sed
>>
>>
>>
>>     -e "s!@DATE@!`date "+%a, %d %b %Y %T %z"`!g"
>>
>>
>>
>>     -e 's!@CNXTDRIVER@!hsf!g'
>>
>>
>>
>>     -e 's!@CNXTDRVDSC@!Conexant HSF softmodem!g'
>>
>>
>>
>>     -e 's!@CNXTTARGET@!hsf!g'
>>
>>
>>
>>     -e 's!@CNXTARCH@!i386!g'
>>
>>
>>
>>     -e 's!@CNXTSERDEV@!HSF!g'
>>
>>
>>
>>     -e 's!@CNXTMAXMDM@!8!g'
>>
>>
>>
>>     -e 's!@CNXTETCDIR@!/etc/hsfmodem!g'
>>
>>
>>
>>     -e 's!@CNXTLIBDIR@!/usr/lib/hsfmodem!g'
>>
>>
>>
>>     -e 's!@CNXTSERIALMAJOR@!240!g'
>>
>>
>>
>>     -e 's!@CNXTCALOUTMAJOR@!241!g'
>>
>>
>>
>>     -e 's!@CNXTSERIALMINOR@!64!g'
>>
>>
>>
>>     -e 's!@CNXTDCPMAJOR@!242!g'
>>
>>
>>
>>     -e 's!@CNXTDIAGMAJOR@!243!g'
>>
>>
>>
>>     -e 's!@CNXTDIAGDMPMINOR@!255!g'
>>
>>
>>
>>     -e 's!@CNXTSCRMAJOR@!244!g'
>>
>>
>>
>>     -e 's!@CNXTSBINDIR@!/usr/sbin!g'
>>
>>
>>
>>     -e 's!@CNXTNVMDIR@!/etc/hsfmodem/nvm!g'
>>
>>
>>
>>     -e 's!@CNXTLINUXVERSION@!7.80.02.06full!g'
>>
>>
>>
>>     -e 's!@CNXTLINUX_REL@!1!g'
>>
>>
>>
>>     -e 's!@CNXTLINUXRPM_REL@!1!g'
>>
>>
>>
>>     -e 's!@CNXTLINUXDEB_REL@!1!g'
>>
>>
>>
>>     -e 's!@CNXTMODS@!hsfpcibasic2 hsfpcibasic3 hsfmc97ich hsfmc97via
>>
>>
>>
>> hsfmc97ali hsfmc97ati hsfmc97sis hsfusbcd2 snd_hda_codec_hsfmodem
>>
>>
>>
>> hsfhda hsfsoar hsfserial hsfengine hsfosspec!g'
>>
>>
>>
>>     -e
>>
>> 's!@PATCHERURL@!http://www.linuxant.com/drivers/hsf/full/archive/patches!g'
>>
>>
>>
>>
>>
>>
>>
>>     -e
>>
>> 's!@PATCHERURLUSER@!http://www.linuxant.com/drivers/hsf/downloads-patches.php!g'
>>
>>
>>
>>
>>
>>
>>
>>     -e "s!@BLAM_SUPPORT@!`test ! "" = yes; echo $?`!g"
>>
>>
>>
>>     -e "s!@SCR_SUPPORT@!`test ! "" = yes; echo $?`!g"
>>
>>
>>
>>     -e "s!@DMP_SUPPORT@!`test -z ""; echo $?`!g"
>>
>>
>>
>>     < hsfdcpd.in > hsfdcpd
>>
>>
>>
>> chmod --reference=hsfdcpd.in hsfdcpd
>>
>>
>>
>> install -m 700 hsfconfig hsfstop hsfmodconflicts hsfdcpd /usr/sbin
>>
>>
>>
>> ln -s rccnxt.in rchsf.in
>>
>>
>>
>> sed
>>
>>
>>
>>     -e "s!@DATE@!`date "+%a, %d %b %Y %T %z"`!g"
>>
>>
>>
>>     -e 's!@CNXTDRIVER@!hsf!g'
>>
>>
>>
>>     -e 's!@CNXTDRVDSC@!Conexant HSF softmodem!g'
>>
>>
>>
>>     -e 's!@CNXTTARGET@!hsf!g'
>>
>>
>>
>>     -e 's!@CNXTARCH@!i386!g'
>>
>>
>>
>>     -e 's!@CNXTSERDEV@!HSF!g'
>>
>>
>>
>>     -e 's!@CNXTMAXMDM@!8!g'
>>
>>
>>
>>     -e 's!@CNXTETCDIR@!/etc/hsfmodem!g'
>>
>>
>>
>>     -e 's!@CNXTLIBDIR@!/usr/lib/hsfmodem!g'
>>
>>
>>
>>     -e 's!@CNXTSERIALMAJOR@!240!g'
>>
>>
>>
>>     -e 's!@CNXTCALOUTMAJOR@!241!g'
>>
>>
>>
>>     -e 's!@CNXTSERIALMINOR@!64!g'
>>
>>
>>
>>     -e 's!@CNXTDCPMAJOR@!242!g'
>>
>>
>>
>>     -e 's!@CNXTDIAGMAJOR@!243!g'
>>
>>
>>
>>     -e 's!@CNXTDIAGDMPMINOR@!255!g'
>>
>>
>>
>>     -e 's!@CNXTSCRMAJOR@!244!g'
>>
>>
>>
>>     -e 's!@CNXTSBINDIR@!/usr/sbin!g'
>>
>>
>>
>>     -e 's!@CNXTNVMDIR@!/etc/hsfmodem/nvm!g'
>>
>>
>>
>>     -e 's!@CNXTLINUXVERSION@!7.80.02.06full!g'
>>
>>
>>
>>     -e 's!@CNXTLINUX_REL@!1!g'
>>
>>
>>
>>     -e 's!@CNXTLINUXRPM_REL@!1!g'
>>
>>
>>
>>     -e 's!@CNXTLINUXDEB_REL@!1!g'
>>
>>
>>
>>     -e 's!@CNXTMODS@!hsfpcibasic2 hsfpcibasic3 hsfmc97ich hsfmc97via
>>
>>
>>
>> hsfmc97ali hsfmc97ati hsfmc97sis hsfusbcd2 snd_hda_codec_hsfmodem
>>
>>
>>
>> hsfhda hsfsoar hsfserial hsfengine hsfosspec!g'
>>
>>
>>
>>     -e
>>
>> 's!@PATCHERURL@!http://www.linuxant.com/drivers/hsf/full/archive/patches!g'
>>
>>
>>
>>
>>
>>
>>
>>     -e
>>
>> 's!@PATCHERURLUSER@!http://www.linuxant.com/drivers/hsf/downloads-patches.php!g'
>>
>>
>>
>>
>>
>>
>>
>>     -e "s!@BLAM_SUPPORT@!`test ! "" = yes; echo $?`!g"
>>
>>
>>
>>     -e "s!@SCR_SUPPORT@!`test ! "" = yes; echo $?`!g"
>>
>>
>>
>>     -e "s!@DMP_SUPPORT@!`test -z ""; echo $?`!g"
>>
>>
>>
>>     < rchsf.in > rchsf
>>
>>
>>
>> chmod --reference=rchsf.in rchsf
>>
>>
>>
>> mkdir -m 755 -p /usr/lib/hsfmodem
>>
>>
>>
>> install -m 700 rchsf /usr/lib/hsfmodem
>>
>>
>>
>> make[1]: Leaving directory
>>
>>
>>
>> `/home/olivares/Downloads/hsfmodem-7.80.02.06full/scripts'
>>
>>
>>
>> make[1]: Entering directory
>>
>>
>>
>> `/home/olivares/Downloads/hsfmodem-7.80.02.06full/modules'
>>
>>
>>
>> rm -rf "/usr/lib/hsfmodem/config.mak"
>>
>>
>>
>> "/usr/lib/hsfmodem/modules/imported" "/usr/lib/hsfmodem/modules"
>>
>>
>>
>> mkdir -m 755 -p /usr/lib/hsfmodem/modules
>>
>>
>>
>> (cd .. && find config.mak modules/imported -depth -print | cpio -pdmu
>>
>>
>>
>> /usr/lib/hsfmodem)
>>
>>
>>
>> 5892 blocks
>>
>>
>>
>> find . ( -name COPYING -o -name '*.sh' -o -name '*.[ch]' -o -name
>>
>>
>>
>> '*.mak' -o -name '[Mm]akefile' ) -print | cpio -pdmu
>>
>>
>>
>> /usr/lib/hsfmodem/modules
>>
>>
>>
>> 3712 blocks
>>
>>
>>
>> find binaries -depth -print | cpio -pdmu /usr/lib/hsfmodem/modules
>>
>>
>>
>> 0 blocks
>>
>>
>>
>> make[1]: Leaving directory
>>
>>
>>
>> `/home/olivares/Downloads/hsfmodem-7.80.02.06full/modules'
>>
>>
>>
>> make[1]: Entering directory
>>
>>
>>
>> `/home/olivares/Downloads/hsfmodem-7.80.02.06full/diag'
>>
>>
>>
>> make[1]: Nothing to be done for `install'.
>>
>>
>>
>> make[1]: Leaving directory
>>
>>
>>
>> `/home/olivares/Downloads/hsfmodem-7.80.02.06full/diag'
>>
>>
>>
>> mkdir -p /etc/hsfmodem/log
>>
>>
>>
>> install -m 444 LICENSE /usr/lib/hsfmodem
>>
>>
>>
>>
>>
>>
>>
>> To complete the installation and configuration of your modem,
>>
>>
>>
>> please run "hsfconfig" (or "/usr/sbin/hsfconfig")
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>> Might it be with Ubuntu?  I used generic package with
>>
>>
>>
>> [olivares@acer-aspire-1 hsfmodem-7.80.02.06full]$ uname -a
>>
>>
>>
>> Linux acer-aspire-1 2.6.40-4.fc15.i686 #1 SMP Fri Jul 29 18:54:39 UTC
>>
>>
>>
>> 2011 i686 i686 i386 GNU/Linux
>>
>>
>>
>>
>>
>>
>>
>> Maybe Marv can test to find out what could be wrong?
>>
>>
>>
>>
>>
>>
>>
>> Regards,
>>
>>
>>
>>
>>
>>
>>
>> Antonio
>>
>>
>>
>>
>>
>>
>>
>> On Thu, Aug 25, 2011 at 8:02 PM, Antonio Olivares
>>
>>
>>
>> <olivares14031@xxxxxxxxx> wrote:
>>
>>
>>
>
>>> Jeffrey,
>
>>
>>
>>
>
>>>
>
>>
>>
>>
>
>>> In the case you provided, you installed/tried to install the
>
>>
>>
>>
>
>>> alsa-linuxant package?
>
>>
>>
>>
>
>>>
>
>>
>>
>>
>
>>> You may not have needed this package.
>
>>
>>
>>
>
>>>
>
>>
>>
>>
>
>>> You do have kernel sources and compiler ready.  However, the
>
>>
>>
>>
>
>>> replacements on the hsfmodem would differ with the ones suggested by
>
>>
>>
>>
>
>>> Jonathan(Linuxant support), DECLARE_MUTEX, with DEFINE_SEMAPHORE after
>
>>
>>
>>
>
>>> you have detected where it bombs out or wait a bit till they(Linuxant)
>
>>
>>
>>
>
>>> patch up the code and make it ready to work.
>
>>
>>
>>
>
>>>
>
>>
>>
>>
>
>>> If someone has suggestions, please forward them to Jeffrey.
>
>>
>>
>>
>
>>>
>
>>
>>
>>
>
>>> Regards,
>
>>
>>
>>
>
>>>
>
>>
>>
>>
>
>>> Antonio
>
>>
>>
>>
>
>>>
>
>>
>>
>>
>
>>>
>
>>
>>
>>
>
>>> On Thu, Aug 25, 2011 at 5:15 PM,  <cohanjeffrey@xxxxxxx> wrote:
>
>>
>>
>>
>
>>>> Great to hear from you Antonio. I'm working only with the Sony 32-bit
>>>> VAIO
>
>>
>>
>>
>
>>>> VGN-N130G and will attach ModemData.txt again.
>
>>
>>
>>
>
>>>>
>
>>
>>
>>
>
>>>> 1) I did this BUT substituted /hsfmodem/ for /hcfpcimodem/ and wvdial
>>>> does
>
>>
>>
>>
>
>>>> not find a modem:
>
>>
>>
>>
>
>>>>
>
>>
>>
>>
>
>>>> replace DECLARE_MUTEX with DEFINE_SEMAPHORE in:
>
>>
>>
>>
>
>>>> - /usr/lib/hcfpcimodem/modules/osnvm.c
>
>>
>>
>>
>
>>>> - /usr/lib/hcfpcimodem/modules/GPL/serial_cnxt.c
>
>>
>>
>>
>
>>>> replace .ioctl with .compat_ioctl in:
>
>>
>>
>>
>
>>>> - /usr/lib/hcfpcimodem/modules/osdiag.c
>
>>
>>
>>
>
>>>>
>
>>
>>
>>
>
>>>> 2) ERRORS: Both alsa-driver-linuxant and hfsmodem packages install with
>
>>
>>
>>
>
>>>> errors, even when I remove them and re-install. Here are excerpts:
>
>>
>>
>>
>
>>>>
>
>>
>>
>>
>
>>>>     alsa-driver-linuxant_1.0.23.1_all.deb:
>
>>
>>
>>
>
>>>> ----in terminal:
>
>>
>>
>>
>
>>>> Building modules for the 2.6.38-11-generic kernel, please wait... done.
>
>>
>>
>>
>
>>>> ERROR: Build failed. Please review the build log at
>
>>
>>
>>
>
>>>> /tmp/alsa-driver-linuxant.26528.log
>
>>
>>
>>
>
>>>> dpkg: error processing alsa-driver-linuxant (--install):
>
>>
>>
>>
>
>>>>  subprocess installed post-installation script returned error exit
>>>> status
>>>> 2
>
>>
>>
>>
>
>>>> ----in log file:
>
>>
>>
>>
>
>>>> checking for GCC version... Kernel compiler:  Used compiler: gcc
>
>>
>>
>>
>
>>>> (Ubuntu/Linaro 4.5.2-8ubuntu4) 4.5.2
>
>>
>>
>>
>
>>>> *** NO PREDEFINED KERNEL COMPILER IS DETECTED
>
>>
>>
>>
>
>>>> *** Assuming the same compiler is used with the current system compiler.
>
>>
>>
>>
>
>>>> *** Please make sure that the same compiler version was used for
>>>> building
>
>>
>>
>>
>
>>>> kernel.
>
>>
>>
>>
>
>>>> and later...
>
>>
>>
>>
>
>>>> /usr/lib/alsa-driver-linuxant/acore/pcm_native.c: In function
>
>>
>>
>>
>
>>>> ‘snd_pcm_hw_params’:
>
>>
>>
>>
>
>>>> /usr/lib/alsa-driver-linuxant/acore/pcm_native.c:489:2: error: implicit
>
>>
>>
>>
>
>>>> declaration of function ‘pm_qos_remove_requirement’
>
>>
>>
>>
>
>>>> /usr/lib/alsa-driver-linuxant/acore/pcm_native.c:492:3: error: implicit
>
>>
>>
>>
>
>>>> declaration of function ‘pm_qos_add_requirement’
>
>>
>>
>>
>
>>>> make[3]: *** [/usr/lib/alsa-driver-linuxant/acore/pcm_native.o] Error 1
>
>>
>>
>>
>
>>>> make[2]: *** [/usr/lib/alsa-driver-linuxant/acore] Error 2
>
>>
>>
>>
>
>>>> make[1]: *** [_module_/usr/lib/alsa-driver-linuxant] Error 2
>
>>
>>
>>
>
>>>> make[1]: Leaving directory `/usr/src/linux-headers-2.6.38-11-generic'
>
>>
>>
>>
>
>>>> make: *** [compile] Error 2
>
>>
>>
>>
>
>>>>
>
>>
>>
>>
>
>>>>     hsfmodem_7.80.02.06full_i386.deb:
>
>>
>>
>>
>
>>>> /usr/lib/hsfmodem/modules/osservices.c:1396:1: warning: the frame size
>>>> of
>
>>
>>
>>
>
>>>> 1028 bytes is larger than 1024 bytes
>
>>
>>
>>
>
>>>>   CC [M]  /usr/lib/hsfmodem/modules/osstdio.o
>
>>
>>
>>
>
>>>>   CC [M]  /usr/lib/hsfmodem/modules/osnvm.o
>
>>
>>
>>
>
>>>> /usr/lib/hsfmodem/modules/osnvm.c:408:8: error: 'MUTEX' undeclared here
>>>> (not
>
>>
>>
>>
>
>>>> in a function)
>
>>
>>
>>
>
>>>> make[2]: *** [/usr/lib/hsfmodem/modules/osnvm.o] Error 1
>
>>
>>
>>
>
>>>> make[1]: *** [_module_/usr/lib/hsfmodem/modules] Error 2
>
>>
>>
>>
>
>>>> make[1]: Leaving directory `/usr/src/linux-headers-2.6.38-11-generic'
>
>>
>>
>>
>
>>>> make: *** [all] Error 2
>
>>
>>
>>
>
>>>> ----I have the long hsfdiag.txt file from "hsfconfig --dumpdiag" and the
>
>>
>>
>>
>
>>>> buildlog files
>
>>
>>
>>
>
>>>>
>
>>
>>
>>
>
>>>> 3) $ uname -a (Jonathan had asked someone for this) gets:
>
>>
>>
>>
>
>>>> Linux whiskeybisquit-VGN-N130G 2.6.38-11-generic #48-Ubuntu SMP Fri Jul
>>>> 29
>
>>
>>
>>
>
>>>> 19:05:14 UTC 2011 i68
>
>>
>>
>>
>
>>>>
>
>>
>>
>>
>
>>>> 4) I had the modem working perfectly in Ubuntu 9.04, but don't remember
>>>> how
>
>>
>>
>>
>
>>>> I did it. Is it possible that it CAN'T be done in 11.04?!
>
>>
>>
>>
>
>>>>
>
>>
>>
>>
>
>>>> I'm not sure if any of this will be of use to you, but am particularly
>
>>
>>
>>
>
>>>> interested in 4); and is it correct to substitute hsfmodem in 1)? Is 2)
>>>> an
>
>>
>>
>>
>
>>>> issue? Also would it have been important to reboot at certain points?
>>>> Should
>
>>
>>
>>
>
>>>> I install a new modem in either beast? I so depend on dial-up! Many
>>>> thanks!
>
>>
>>
>>
>
>>>>
>
>>
>>
>>
>
>>>> Jeffrey
>
>>
>>
>>
>
>>>>
>
>>
>>
>>
>
>>>> -----Original Message-----
>
>>
>>
>>
>
>>>> From: Antonio Olivares <olivares14031@xxxxxxxxx>
>
>>
>>
>>
>
>>>> To: Jeffrey Cohan <cohanjeffrey@xxxxxxx>
>
>>
>>
>>
>
>>>> Cc: discuss@xxxxxxxxxxxxx
>
>>
>>
>>
>
>>>> Sent: Wed, Aug 24, 2011 7:17 pm
>
>>
>>
>>
>
>>>> Subject: Re: no dial-up: hsfmodem and alsa-driver-linuxant problem?
>
>>
>>
>>
>
>>>>
>
>>
>>
>>
>
>>>>
>
>>
>>
>>
>
>>>>
>
>>
>>
>>
>
>>>>
>
>>
>>
>>
>
>>>> Jeffrey,
>
>>
>>
>>
>
>>>>
>
>>
>>
>>
>
>>>>
>
>>
>>
>>
>
>>>>
>
>>
>>
>>
>
>>>> In the x86_64 bit machine, if you had 32 bit linux installed, it would
>
>>
>>
>>
>
>>>>
>
>>
>>
>>
>
>>>> be a nice opportunity for you to check the modified driver *to see if
>
>>
>>
>>
>
>>>>
>
>>
>>
>>
>
>>>> it would work*, but since it is 64 bit you get the message directly
>
>>
>>
>>
>
>>>>
>
>>
>>
>>
>
>>>> from ModemData.txt
>
>>
>>
>>
>
>>>>
>
>>
>>
>>
>
>>>>
>
>>
>>
>>
>
>>>>
>
>>
>>
>>
>
>>>> There is no agrsm software support for x86_64 systems, through the modem
>>>> may
>
>>
>>
>>
>
>>>> be
>
>>
>>
>>
>
>>>>
>
>>
>>
>>
>
>>>>  supported on Intel/i386 installations, which do more slowly servce
>
>>
>>
>>
>
>>>>
>
>>
>>
>>
>
>>>> x86_64 processors.
>
>>
>>
>>
>
>>>>
>
>>
>>
>>
>
>>>>
>
>>
>>
>>
>
>>>>
>
>>
>>
>>
>
>>>> * driver
>
>>
>>
>>
>
>>>>
>
>>
>>
>>
>
>>>>
>>>>
>>>> http://linmodems.technion.ac.il/packages/ltmodem/11c11040/agrsm-11c11040_20110811_i386.deb
>
>>
>>
>>
>
>>>>
>
>>
>>
>>
>
>>>> + new agrsm tools
>
>>
>>
>>
>
>>>>
>
>>
>>
>>
>
>>>>
>
>>
>>
>>
>
>>>>
>
>>
>>
>>
>
>>>> For the other modem, Jonathan at Linuxant has posted ways to
>
>>
>>
>>
>
>>>>
>
>>
>>
>>
>
>>>> circumvent the errors:
>
>>
>>
>>
>
>>>>
>
>>
>>
>>
>
>>>>
>
>>
>>
>>
>
>>>>
>
>>
>>
>>
>
>>>>
>>>>
>>>> http://linmodems.org/cgi-bin/ezmlm-cgi?1:sss:37710:201108:dpmgnpddbcjlkfmlpmin#b
>
>>
>>
>>
>
>>>>
>
>>
>>
>>
>
>>>> <quote>
>
>>
>>
>>
>
>>>>
>
>>
>>
>>
>
>>>> Hi,
>
>>
>>
>>
>
>>>>
>
>>
>>
>>
>
>>>>
>
>>
>>
>>
>
>>>>
>
>>
>>
>>
>
>>>> this is a known build issue with recent kernels, even with the latest
>
>>
>>
>>
>
>>>>
>
>>
>>
>>
>
>>>> release of the driver. A used provided the following workaround to
>
>>
>>
>>
>
>>>>
>
>>
>>
>>
>
>>>> solve it:
>
>>
>>
>>
>
>>>>
>
>>
>>
>>
>
>>>>
>
>>
>>
>>
>
>>>>
>
>>
>>
>>
>
>>>> ---
>
>>
>>
>>
>
>>>>
>
>>
>>
>>
>
>>>> replace DECLARE_MUTEX with DEFINE_SEMAPHORE in:
>
>>
>>
>>
>
>>>>
>
>>
>>
>>
>
>>>> - /usr/lib/hcfpcimodem/modules/osnvm.c
>
>>
>>
>>
>
>>>>
>
>>
>>
>>
>
>>>> - /usr/lib/hcfpcimodem/modules/GPL/serial_cnxt.c
>
>>
>>
>>
>
>>>>
>
>>
>>
>>
>
>>>>
>
>>
>>
>>
>
>>>>
>
>>
>>
>>
>
>>>> replace .ioctl with .compat_ioctl in:
>
>>
>>
>>
>
>>>>
>
>>
>>
>>
>
>>>> - /usr/lib/hcfpcimodem/modules/osdiag.c
>
>>
>>
>>
>
>>>>
>
>>
>>
>>
>
>>>> ---
>
>>
>>
>>
>
>>>>
>
>>
>>
>>
>
>>>>
>
>>
>>
>>
>
>>>>
>
>>
>>
>>
>
>>>> This build problem will be fixed in a future release of the driver.
>
>>
>>
>>
>
>>>>
>
>>
>>
>>
>
>>>>
>
>>
>>
>>
>
>>>>
>
>>
>>
>>
>
>>>> Regards,
>
>>
>>
>>
>
>>>>
>
>>
>>
>>
>
>>>>
>
>>
>>
>>
>
>>>>
>
>>
>>
>>
>
>>>>
>
>>
>>
>>
>
>>>>
>
>>
>>
>>
>
>>>> Jonathan
>
>>
>>
>>
>
>>>>
>
>>
>>
>>
>
>>>> Technical specialist / Linuxant
>
>>
>>
>>
>
>>>>
>
>>
>>
>>
>
>>>> www.linuxant.com
>
>>
>>
>>
>
>>>>
>
>>
>>
>>
>
>>>> support@xxxxxxxxxxxx
>
>>
>>
>>
>
>>>>
>
>>
>>
>>
>
>>>> </quote>
>
>>
>>
>>
>
>>>>
>
>>
>>
>>
>
>>>>
>
>>
>>
>>
>
>>>>
>
>>
>>
>>
>
>>>> So you may try the fixes suggested by Jonathan in the meantime.  Or
>
>>
>>
>>
>
>>>>
>
>>
>>
>>
>
>>>> you have the option to try the driver 11c11040 but on 32 bit linux.
>
>>
>>
>>
>
>>>>
>
>>
>>
>>
>
>>>> Hopefully you can get one of these modems to work.
>
>>
>>
>>
>
>>>>
>
>>
>>
>>
>
>>>>
>
>>
>>
>>
>
>>>>
>
>>
>>
>>
>
>>>> Regards,
>
>>
>>
>>
>
>>>>
>
>>
>>
>>
>
>>>>
>
>>
>>
>>
>
>>>>
>
>>
>>
>>
>
>>>> Antonio
>
>>
>>
>>
>
>>>>
>
>>
>>
>>
>
>>>>
>
>>
>>
>>
>
>>>>
>
>>
>>
>>
>
>>>> On Wed, Aug 24, 2011 at 8:56 PM, Jeffrey Cohan <cohanjeffrey@xxxxxxx>
>>>> wrote:
>
>>
>>
>>
>
>>>>
>
>>
>>
>>
>
>>>>> I have spent many many hours trying to get dial-up working on two
>>>>> laptops
>
>>
>>
>>
>
>>>>
>
>>
>>
>>
>
>>>>> and would so appreciate your help. Dial-up on either one would be just
>
>>
>>
>>
>
>>>>> fine.
>
>>
>>
>>
>
>>>>
>
>>
>>
>>
>
>>>>>
>
>>
>>
>>
>
>>>>
>
>>
>>
>>
>
>>>>> I'm assuming it will be impossible on the HP laptop (64-bit) as I found
>
>>
>>
>>
>
>>>>
>
>>
>>
>>
>
>>>>> this:
>
>>
>>
>>
>
>>>>
>
>>
>>
>>
>
>>>>> "Current support for the 11c11040 modem does NOT exist on a non-x86
>>>>> system
>
>>
>>
>>
>
>>>>
>
>>
>>
>>
>
>>>>> (e.g. AMD, or x86_64.) This is because there is a proprietary core in
>>>>> the
>
>>
>>
>>
>
>>>>
>
>>
>>
>>
>
>>>>> code compiled for x86 systems."
>
>>
>>
>>
>
>>>>
>
>>
>>
>>
>
>>>>>
>
>>
>>
>>
>
>>>>
>
>>
>>
>>
>
>>>>> On the VAIO (32-bit) it worked perfectly in an earlier version of
>>>>> Ubuntu
>
>>
>>
>>
>
>>>>
>
>>
>>
>>
>
>>>>> before upgrading.
>
>>
>>
>>
>
>>>>
>
>>
>>
>>
>
>>>>>
>
>>
>>
>>
>
>>>>
>
>>
>>
>>
>
>>>>> I can't seem to find an appropriate driver at www.linuxant.com for my
>
>>
>>
>>
>
>>>>> Linux
>
>>
>>
>>
>
>>>>
>
>>
>>
>>
>
>>>>> version 2.6.38-11-generic.
>
>>
>>
>>
>
>>>>
>
>>
>>
>>
>
>>>>>
>
>>
>>
>>
>
>>>>
>
>>
>>
>>
>
>>>>> Alsa-driver-linuxant doesn't seem to be properly installed.
>
>>
>>
>>
>
>>>>
>
>>
>>
>>
>
>>>>>
>
>>
>>
>>
>
>>>>
>
>>
>>
>>
>
>>>>> I get this error message:
>
>>
>>
>>
>
>>>>
>
>>
>>
>>
>
>>>>> ERROR: Module build failed!
>
>>
>>
>>
>
>>>>
>
>>
>>
>>
>
>>>>> Please examine the log file
>
>>
>>
>>
>
>>>>> "/etc/hsfmodem/log/buildlog-20110824182445.txt"
>
>>
>>
>>
>
>>>>
>
>>
>>
>>
>
>>>>> to determine why.
>
>>
>>
>>
>
>>>>
>
>>
>>
>>
>
>>>>> dpkg: error processing alsa-driver-linuxant (--configure):
>
>>
>>
>>
>
>>>>
>
>>
>>
>>
>
>>>>>  subprocess installed post-installation script returned error exit
>>>>> status
>
>>
>>
>>
>
>>>>> 2
>
>>
>>
>>
>
>>>>
>
>>
>>
>>
>
>>>>> Errors were encountered while processing:
>
>>
>>
>>
>
>>>>
>
>>
>>
>>
>
>>>>>  alsa-driver-linuxant
>
>>
>>
>>
>
>>>>
>
>>
>>
>>
>
>>>>> E: Sub-process /usr/bin/dpkg returned an error code (1)
>
>>
>>
>>
>
>>>>
>
>>
>>
>>
>
>>>>> ===============
>
>>
>>
>>
>
>>>>
>
>>
>>
>>
>
>>>>>
>
>>
>>
>>
>
>>>>
>
>>
>>
>>
>
>>>>> Thanks much!
>
>>
>>
>>
>
>>>>
>
>>
>>
>>
>
>>>>>
>
>>
>>
>>
>
>>>>
>
>>
>>
>>
>
>>>>> Jeff
>
>>
>>
>>
>
>>>>
>
>>
>>
>>
>
>>>>>
>
>>
>>
>>
>
>>>>
>
>>
>>
>>
>
>>>>>
>
>>
>>
>>
>
>>>>
>
>>
>>
>>
>
>>>>>
>
>>
>>
>>
>
>>>>
>
>>
>>
>>
>
>>>>
>
>>
>>
>>
>
>>>>
>
>>
>>
>>
>
>>>>
>
>>
>>
>>
>
>>>
>
>>
>>
>>
>>
>>
>>
>



[Index of Archives]     [Linux Media Development]     [Asterisk]     [DCCP]     [Netdev]     [X.org]     [Xfree86]     [Fedora Women]     [Linux USB]

  Powered by Linux