D-link DWM156 cell phone

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



 Only plain text email is forwarded by the  Discuss@xxxxxxxxxxxxx List Server,
 as HTML can contain viruses. Use as the email Subject Line:
           YourName, YourCountry  kernel 2.6.38-8-generic-pae 
 With this Subject Line cogent experts will be alerted, and useful case names left in the Archive.
 YourCountry will enable Country specific guidance. Linux experts in YourCountry 
 can be found through: http://www.linux.org/groups/index.html.
They will know your Country's modem code, which may be essential for dialup service.
Responses from Discuss@xxxxxxxxxxxxx are sometimes blocked by an Internet Provider mail filters.
 So in a day, also check the Archived responses at http://www.linmodems.org 
--------------------------  System information ----------------------------
CPU=i686,  Ubuntu ,  ALSA_version=1.0.23
Linux version 2.6.38-8-generic-pae (buildd@vernadsky) (gcc version 4.5.2 (Ubuntu/Linaro 4.5.2-8ubuntu3) ) #42-Ubuntu SMP Mon Apr 11 05:17:09 UTC 2011
 scanModem update of:  2011_08_08

Distrib_ID=Ubuntu
DistribCodeName=natty
AptRepositoryStem=http://ir.archive.ubuntu.com/ubuntu/


Presently install your Linux Distributions dkms package. It provides for automated driver updates,
following upgrade of your kernel.  For details see http://linux.dell.com/projects.shtml#dkms

 There are no blacklisted modem drivers in /etc/modprobe*  files 

 Potentially useful modem drivers now loaded are:
       snd_hda_intel           

Attached USB devices are:
 ID 07d1:7e11 D-Link System 
 ID 15d9:0a4c Trust International B.V. 
 ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
 ID 0461:4db6 Primax Electronics, Ltd 
 ID 03eb:0902 Atmel Corp. 4-Port Hub
 ID 03f0:231d Hewlett-Packard 
 ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
If a cellphone is not detected, see http://ubuntuforums.org/archive/index.php/t-878554.html
A sample report is:  http://linmodems.technion.ac.il/bigarch/archive-nineth/msg00578.html

If a USB modem or cellphone is attached and was not detected, please
provide available information in your request to discuss@xxxxxxxxxxxxx

Candidate PCI devices with modem chips are:
00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06)
00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 05)
01:00.1 Audio device: ATI Technologies Inc RV710/730
High Definition Audio cards can host modem chips.

For candidate card in slot 00:16.0, firmware information and bootup diagnostics are:
 PCI slot	PCI ID		SubsystemID	Name
 ----------	---------	---------	--------------
 00:16.0	8086:3b64	103c:1411	Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller 

 Modem interrupt assignment and sharing: 
 --- Bootup diagnostics for card in PCI slot 00:16.0 ----
[    1.111908] pci 0000:00:16.0: [8086:3b64] type 0 class 0x000780
[    1.111936] pci 0000:00:16.0: reg 10: [mem 0xd4604000-0xd460400f 64bit]
[    1.112010] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    1.112014] pci 0000:00:16.0: PME# disabled

 The PCI slot 00:16.0 of the modem card may be disabled early in 
 a bootup process,  but then enabled later. If modem drivers load 
 but the  modem is not responsive, read DOCs/Bootup.txt about possible fixes.
 Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx
 if help is needed.
 

For candidate card in slot 00:1b.0, firmware information and bootup diagnostics are:
 PCI slot	PCI ID		SubsystemID	Name
 ----------	---------	---------	--------------
 00:1b.0	8086:3b56	103c:1411	Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio 

 Modem interrupt assignment and sharing: 
 44:        560         73         57         64   PCI-MSI-edge      hda_intel
 --- Bootup diagnostics for card in PCI slot 00:1b.0 ----
[    1.112199] pci 0000:00:1b.0: [8086:3b56] type 0 class 0x000403
[    1.112220] pci 0000:00:1b.0: reg 10: [mem 0xd4600000-0xd4603fff 64bit]
[    1.112297] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    1.112301] pci 0000:00:1b.0: PME# disabled
[   12.868230] HDA Intel 0000:00:1b.0: power state changed by ACPI to D0
[   12.868244] HDA Intel 0000:00:1b.0: power state changed by ACPI to D0
[   12.868258] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[   12.868339] HDA Intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[   12.868370] HDA Intel 0000:00:1b.0: setting latency timer to 64
[   12.945752] input: HDA Intel Mic at Ext Left Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[   12.945893] input: HDA Intel HP Out at Ext Left Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10

 The PCI slot 00:1b.0 of the modem card may be disabled early in 
 a bootup process,  but then enabled later. If modem drivers load 
 but the  modem is not responsive, read DOCs/Bootup.txt about possible fixes.
 Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx
 if help is needed.
 

For candidate card in slot 01:00.1, firmware information and bootup diagnostics are:
 PCI slot	PCI ID		SubsystemID	Name
 ----------	---------	---------	--------------
 01:00.1	1002:aa38	103c:1411	Audio device: ATI Technologies Inc RV710/730

 Modem interrupt assignment and sharing: 
 45:         53         52         95         81   PCI-MSI-edge      hda_intel
 --- Bootup diagnostics for card in PCI slot 01:00.1 ----
[    1.113514] pci 0000:01:00.1: [1002:aa38] type 0 class 0x000403
[    1.113526] pci 0000:01:00.1: reg 10: [mem 0xd4510000-0xd4513fff]
[    1.113589] pci 0000:01:00.1: supports D1 D2
[   13.207895] HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[   13.207958] HDA Intel 0000:01:00.1: irq 45 for MSI/MSI-X
[   13.207986] HDA Intel 0000:01:00.1: setting latency timer to 64

=== Finished firmware and bootup diagnostics, next deducing cogent software. ===

A candidate modem is not transparent among the PCI devices:
------------------------------------------------
00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06)
00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 05)
00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 6 port SATA AHCI Controller (rev 05)
00:1f.6 Signal processing controller: Intel Corporation 5 Series/3400 Series Chipset Thermal Subsystem (rev 05)
01:00.0 VGA compatible controller: ATI Technologies Inc M93 [Mobility Radeon HD 4500 Series]
01:00.1 Audio device: ATI Technologies Inc RV710/730
44:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01)
45:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03)
------------------------------------------------
 with USB, bridge, and RAM devices not displayed.
If a High Definition Audio card is present, if might be hosted on the Subsystem.

If your modem is an
   external USB type,
   connected by an external serial cable,
   or mounted internally on an ISA card,
then scanModem would not access it. 

Try with Root permission
 $ sudo wvdialconf  /etc/wvdial.conf
 to detect these modem types and some USB modems.
 If the detection is successful, read the DOCs/wvdial.txt .
 Edit the /etc/wvdial.conf with Root permission:
 	sudo  gedit  /etc/wvdial.conf
  will be able to dial out with Root permission:
	sudo wvdial

 Many modems for which scanModem fails have Conexant chips. 
 From http://www.linuxant.com/drivers/modemident.php
 get the ListModem tool, which will report on Conexant chipset modems

 If the above tests fail, please provide any independent information available on your modem.
 If an alternative boot into Microsoft windows can be done, do mouse
clicks on:
   Start > Settings > Control Panel > Classical View (for Window XP) > System
> Hardware > Device Manager > Modems > Click on the + > Modem. Double click to
expand the graphic. Manufacturer information may be displayed. For example, CXT
stands for Conexant. Click the Diagnostics Tab. Record any hardware ID or vendor
and device information. From the Driver Details TAB, copy out the VENdor and DEVice information.
Next do the Query Modem and record the ATI specifications displayed such as:
    ATI3 - Agere SoftModem Version 2.1.22
    ATI5 - 2.1.22, AMR Intel MB, AC97 ID:SIL REV:0x27
Try to identify the modem setup file, with name perhaps MODEM.INF.
If may contain chipset Vendor informaton.


Predictive  diagnostics for card in bus 00:16.0:
	Modem chipset not detected on
NAME="Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller "
CLASS=0780
PCIDEV=8086:3b64
SUBSYS=103c:1411
IRQ=10
HDA2=00:1b.0
HDA2=01:00.1

 For candidate modem in:  00:16.0
   0780 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller 
      Primary device ID:  8086:3b64
 Support type needed or chipset:	
 


Predictive  diagnostics for card in bus 00:1b.0:
	Modem chipset not detected on
NAME="Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio "
CLASS=0403
PCIDEV=8086:3b56
SUBSYS=103c:1411
IRQ=44

 For candidate modem in:  00:1b.0
   0403 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio 
      Primary device ID:  8086:3b56
 Support type needed or chipset:	
 


Predictive  diagnostics for card in bus 01:00.1:
	Modem chipset not detected on
NAME="Audio device: ATI Technologies Inc RV710/730"
CLASS=0403
PCIDEV=1002:aa38
SUBSYS=103c:1411
IRQ=45

 For candidate modem in:  01:00.1
   0403 Audio device: ATI Technologies Inc RV710/730
      Primary device ID:  1002:aa38
 Support type needed or chipset:	
 


 The base of the UDEV device file system is: /dev/.udev

 Versions adequately match for the compiler installed: 4.5.2
             and the compiler used in kernel assembly: 4.5.2


 
 Minimal compiling resources appear complete:
   make utility - /usr/bin/make
   Compiler version 4.5
   linuc_headers base folder /lib/modules/2.6.38-8-generic-pae/build

 However some compilations and executable functions may need additional files,
 in the FileNames.h (so called kernel "h"eaders) collection installed in  /usr/include/ .
 For martian_modem, additional required packages are needed. The also required headers of package libc6 are commonly installed by default. 
 Compiling hsfmodem drivers does require linux-libc-dev and libc6-dev packages, for kernels 2.6.24 and later versions.
 In not included on your install CD, search for them at http://packages.ubuntu.com
 or comparable Repository for other Linux distros.
 When compiling ALSA drivers, the utility "patch" will also be needed.




If a driver compilation fails, with message including some lack of some FileName.h (stdio.h for example), then
Some additional kernel-header files need installation to /usr/include. The minimal additional packages are libc6-dev
and any of its dependents, under Ubuntu linux-libc-dev

If an alternate ethernet connection is available,
$  apt-get update
$  apt-get -s install linux-kernel-devel
will install needed packages.
For Debian/Ubuntu related distributions, run the following command to display the needed package list:

Otherwise packages have to be found through http://packages.ubuntu.com
Once downloaded and transferred into a Linux partition,
they can be installed alltogether with:
$ sudo dpkg -i *.deb


Checking pppd properties:
	-rwxr-xr-x 1 root dip 273272 2011-02-04 12:13 /usr/sbin/pppd

In case of an "error 17" "serial loopback" problem, see:
    http://linmodems.technion.ac.il/linmodems/archive-sixth/msg02637.html

To enable dialout without Root permission do:
	$ su - root  (not for Ubuntu)
        sudo chmod a+x /usr/sbin/pppd
or under Ubuntu related Linuxes
	sudo chmod a+x /usr/sbin/pppd

Checking settings of:	/etc/ppp/options
asyncmap 0
noauth
crtscts
lock
hide-password
modem
lcp-echo-interval 30
lcp-echo-failure 4
noipx

In case of a message like:
   Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html

For guidance on FAX usage, get from http://linmodems.technion.ac.il/packages/  get faxing.tar.gz
It has samples for a modem using port /dev/ttySL0, which must be changed to match your modem's port.

Read Modem/DOCs/YourSystem.txt concerning other COMM channels: eth0 wlan0
Which can interfere with Browser naviagation.

 Don't worry about the following, it is for experts should trouble shooting be necessary.
==========================================================

 Checking for modem support lines:
 --------------------------------------
     /device/modem symbolic link:   
slmodemd created symbolic link /dev/ttySL0:  
     Within /etc/udev/ files:

     Within /etc/modprobe.conf files:
/etc/modprobe.d/alsa-base.conf:options snd-atiixp-modem index=-2
/etc/modprobe.d/alsa-base.conf:options snd-via82xx-modem index=-2
/etc/modprobe.d/blacklist-modem.conf:# Uncomment these entries in order to blacklist unwanted modem drivers
/etc/modprobe.d/blacklist-modem.conf:# blacklist snd-atiixp-modem
/etc/modprobe.d/blacklist-modem.conf:# blacklist snd-via82xx-modem
     Within any ancient /etc/devfs files:

     Within ancient kernel 2.4.n /etc/module.conf files:

--------- end modem support lines --------

           CPU0       CPU1       CPU2       CPU3       
  0:         43          3          0          0   IO-APIC-edge      timer
  1:         30        403         10          6   IO-APIC-edge      i8042
  8:          1          0          0          0   IO-APIC-edge      rtc0
  9:         41         43         31         30   IO-APIC-fasteoi   acpi
 12:         41         43         46         51   IO-APIC-edge      i8042
 16:         76         78         57         57   IO-APIC-fasteoi   ehci_hcd:usb1
 18:          0          0          0          0   IO-APIC-fasteoi   ips
 19:         15         19        228        202   IO-APIC-fasteoi   ath9k
 20:      42013        580         49         51   IO-APIC-fasteoi   ehci_hcd:usb2
 23:          0          0          0          0   IO-APIC-edge      lis3lv02d
 41:          0          0          0          0   PCI-MSI-edge      eth0
 42:      12338       1115       1129       1118   PCI-MSI-edge      ahci
 43:      61559       1597         95         94   PCI-MSI-edge      radeon
 44:        560         73         57         64   PCI-MSI-edge      hda_intel
 45:         53         52         95         81   PCI-MSI-edge      hda_intel
NMI:          0          0          0          0   Non-maskable interrupts
LOC:      92314      89618      21420      14515   Local timer interrupts
SPU:          0          0          0          0   Spurious interrupts
PMI:          0          0          0          0   Performance monitoring interrupts
IWI:          0          0          0          0   IRQ work interrupts
RES:       1607       4402        770        786   Rescheduling interrupts
CAL:        547        557        973       1576   Function call interrupts
TLB:        463        563        511        436   TLB shootdowns
TRM:          0          0          0          0   Thermal event interrupts
THR:          0          0          0          0   Threshold APIC interrupts
MCE:          0          0          0          0   Machine check exceptions
MCP:          5          5          5          5   Machine check polls
ERR:          3
MIS:          0

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.38-8-generic-pae (buildd@vernadsky) (gcc version 4.5.2 (Ubuntu/Linaro 4.5.2-8ubuntu3) ) #42-Ubuntu SMP Mon Apr 11 05:17:09 UTC 2011 (Ubuntu 2.6.38-8.42-generic-pae 2.6.38.2)
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000ef000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 00000000befcf000 (usable)
[    0.000000]  BIOS-e820: 00000000befcf000 - 00000000bf6cf000 (reserved)
[    0.000000]  BIOS-e820: 00000000bf6cf000 - 00000000bf7cf000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000bf7cf000 - 00000000bf7ff000 (ACPI data)
[    0.000000]  BIOS-e820: 00000000bf7ff000 - 00000000bf800000 (usable)
[    0.000000]  BIOS-e820: 00000000bf800000 - 00000000c0000000 (reserved)
[    0.000000]  BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed10000 - 00000000fed14000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed19000 - 00000000fed1a000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed1b000 - 00000000fed20000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  BIOS-e820: 00000000ffd80000 - 0000000100000000 (reserved)
[    0.000000]  BIOS-e820: 0000000100000000 - 0000000138000000 (usable)
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] DMI 2.6 present.
[    0.000000] DMI: Hewlett-Packard HP ProBook 4520s/1411, BIOS 68AZZ Ver. F.08 06/29/2010
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[    0.000000] last_pfn = 0x138000 max_arch_pfn = 0x1000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0FFC00000 mask FFFC00000 write-protect
[    0.000000]   1 base 000000000 mask F80000000 write-back
[    0.000000]   2 base 080000000 mask FC0000000 write-back
[    0.000000]   3 base 100000000 mask FC0000000 write-back
[    0.000000]   4 base 138000000 mask FF8000000 uncachable
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] initial memory mapped : 0 - 01e00000
[    0.000000] init_memory_mapping: 0000000000000000-0000000037bfe000
[    0.000000]  0000000000 - 0000200000 page 4k
[    0.000000]  0000200000 - 0037a00000 page 2M
[    0.000000]  0037a00000 - 0037bfe000 page 4k
[    0.000000] kernel direct mapping tables up to 37bfe000 @ 1dfb000-1e00000
[    0.000000] RAMDISK: 36786000 - 373bb000
[    0.000000] ACPI: RSDP 000f2aa0 00024 (v02 HPQOEM)
[    0.000000] ACPI: XSDT bf7fe120 0007C (v01 HPQOEM SLIC-MPC 0000000F      01000013)
[    0.000000] ACPI: FACP bf7fc000 000F4 (v03 HPQOEM 1411     0000000F HP   00000001)
[    0.000000] ACPI: DSDT bf7d8000 1E901 (v02 HPQOEM 1411     00000001 INTL 20060912)
[    0.000000] ACPI: FACS bf77e000 00040
[    0.000000] ACPI: HPET bf7fb000 00038 (v01 HPQOEM 1411     00000001 HP   00000001)
[    0.000000] ACPI: APIC bf7fa000 000BC (v01 HPQOEM 1411     00000001 HP   00000001)
[    0.000000] ACPI: MCFG bf7f9000 0003C (v01 HPQOEM 1411     00000001 HP   00000001)
[    0.000000] ACPI: ASF! bf7f8000 000A0 (v32 HPQOEM 1411     00000001 HP   00000001)
[    0.000000] ACPI: SSDT bf7d5000 00135 (v01 HPQOEM SataAhci 00001000 INTL 20060912)
[    0.000000] ACPI: SSDT bf7d4000 00314 (v01 HPQOEM PtidDevc 00001000 INTL 20060912)
[    0.000000] ACPI: SSDT bf7d3000 0005F (v01 HPQOEM   HPQNLP 00000001 INTL 20060912)
[    0.000000] ACPI: SSDT bf7d2000 00A10 (v01  PmRef    CpuPm 00003000 INTL 20060912)
[    0.000000] ACPI: SSDT bf7d1000 00288 (v01  PmRef  Cpu0Tst 00003000 INTL 20060912)
[    0.000000] ACPI: SSDT bf7d0000 00225 (v01  PmRef    ApTst 00003000 INTL 20060912)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 4100MB HIGHMEM available.
[    0.000000] 891MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 37bfe000
[    0.000000]   low ram: 0 - 37bfe000
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   Normal   0x00001000 -> 0x00037bfe
[    0.000000]   HighMem  0x00037bfe -> 0x00138000
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[4] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009f
[    0.000000]     0: 0x00000100 -> 0x000befcf
[    0.000000]     0: 0x000bf7ff -> 0x000bf800
[    0.000000]     0: 0x00100000 -> 0x00138000
[    0.000000] On node 0 totalpages: 1011551
[    0.000000] free_area_init_node: node 0, pgdat c17babc0, node_mem_map f4086200
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3951 pages, LIFO batch:0
[    0.000000]   Normal zone: 1752 pages used for memmap
[    0.000000]   Normal zone: 222502 pages, LIFO batch:31
[    0.000000]   HighMem zone: 8201 pages used for memmap
[    0.000000]   HighMem zone: 775113 pages, LIFO batch:31
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x05] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] SMP: Allowing 8 CPUs, 4 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000ef000
[    0.000000] PM: Registered nosave memory: 00000000000ef000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:20000000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] PERCPU: Embedded 13 pages/cpu @f7800000 s32320 r0 d20928 u262144
[    0.000000] pcpu-alloc: s32320 r0 d20928 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 1001566
[    0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-2.6.38-8-generic-pae root=UUID=aaaf3442-da72-4179-b413-23063d908920 ro quiet splash vt.handoff=7
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Initializing CPU#0
[    0.000000] allocated 25558720 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] Initializing HighMem for node 0 (00037bfe:00138000)
[    0.000000] Memory: 3957880k/5111808k available (5349k kernel code, 88324k reserved, 2599k data, 720k init, 3133256k highmem)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xfff16000 - 0xfffff000   ( 932 kB)
[    0.000000]     pkmap   : 0xffc00000 - 0xffe00000   (2048 kB)
[    0.000000]     vmalloc : 0xf83fe000 - 0xffbfe000   ( 120 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xf7bfe000   ( 891 MB)
[    0.000000]       .init : 0xc17c4000 - 0xc1878000   ( 720 kB)
[    0.000000]       .data : 0xc1539545 - 0xc17c3540   (2599 kB)
[    0.000000]       .text : 0xc1000000 - 0xc1539545   (5349 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] 	RCU-based detection of stalled CPUs is disabled.
[    0.000000] NR_IRQS:2304 nr_irqs:744 16
[    0.000000] CPU 0 irqstacks, hard=f740a000 soft=f740c000
[    0.000000] Extended CMOS year: 2000
[    0.000000] vt handoff: transparent VT on vt#7
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] hpet clockevent registered
[    0.000000] Fast TSC calibration using PIT
[    0.004000] Detected 2526.798 MHz processor.
[    0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 5053.59 BogoMIPS (lpj=10107192)
[    0.000006] pid_max: default: 32768 minimum: 301
[    0.000022] Security Framework initialized
[    0.000033] AppArmor: AppArmor initialized
[    0.000034] Yama: becoming mindful.
[    0.000078] Mount-cache hash table entries: 512
[    0.000180] Initializing cgroup subsys ns
[    0.000183] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
[    0.000185] Initializing cgroup subsys cpuacct
[    0.000190] Initializing cgroup subsys memory
[    0.000196] Initializing cgroup subsys devices
[    0.000198] Initializing cgroup subsys freezer
[    0.000199] Initializing cgroup subsys net_cls
[    0.000201] Initializing cgroup subsys blkio
[    0.000227] CPU: Physical Processor ID: 0
[    0.000228] CPU: Processor Core ID: 0
[    0.000232] mce: CPU supports 9 MCE banks
[    0.000242] CPU0: Thermal monitoring enabled (TM1)
[    0.000248] using mwait in idle threads.
[    0.002304] ACPI: Core revision 20110112
[    0.011725] ftrace: allocating 24250 entries in 48 pages
[    0.018361] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.018759] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.058417] CPU0: Intel(R) Core(TM) i5 CPU       M 460  @ 2.53GHz stepping 05
[    0.163569] Performance Events: PEBS fmt1+, Westmere events, Intel PMU driver.
[    0.163574] ... version:                3
[    0.163575] ... bit width:              48
[    0.163576] ... generic registers:      4
[    0.163577] ... value mask:             0000ffffffffffff
[    0.163578] ... max period:             000000007fffffff
[    0.163579] ... fixed-purpose events:   3
[    0.163580] ... event mask:             000000070000000f
[    0.163910] CPU 1 irqstacks, hard=f74ce000 soft=f74d8000
[    0.163913] Booting Node   0, Processors  #1
[    0.174130] Initializing CPU#1
[    0.271692] CPU 2 irqstacks, hard=f74e2000 soft=f74e4000
[    0.271695]  #2
[    0.281841] Initializing CPU#2
[    0.379591] CPU 3 irqstacks, hard=f7510000 soft=f7512000
[    0.379594]  #3
[    0.389739] Initializing CPU#3
[    0.487510] Brought up 4 CPUs
[    0.487512] Total of 4 processors activated (20215.25 BogoMIPS).
[    0.489329] devtmpfs: initialized
[    0.490288] print_constraints: dummy: 
[    0.490316] Time:  3:27:23  Date: 08/24/11
[    0.490351] NET: Registered protocol family 16
[    0.490435] EISA bus registered
[    0.490437] Trying to unpack rootfs image as initramfs...
[    0.490453] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.490456] ACPI: bus type pci registered
[    0.490519] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.490521] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.490523] PCI: Using MMCONFIG for extended config space
[    0.490524] PCI: Using configuration type 1 for base access
[    0.491207] bio: create slab <bio-0> at 0
[    0.493319] ACPI: EC: Look up EC in DSDT
[    0.525549] ACPI: Executed 2 blocks of module-level executable AML code
[    0.555511] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.561561] ACPI: SSDT bf6c8918 0043B (v01  PmRef  Cpu0Ist 00003000 INTL 20060912)
[    0.562045] ACPI: Dynamic OEM Table Load:
[    0.562047] ACPI: SSDT   (null) 0043B (v01  PmRef  Cpu0Ist 00003000 INTL 20060912)
[    0.562174] ACPI: SSDT bf6c6018 008AA (v01  PmRef  Cpu0Cst 00003001 INTL 20060912)
[    0.562638] ACPI: Dynamic OEM Table Load:
[    0.562639] ACPI: SSDT   (null) 008AA (v01  PmRef  Cpu0Cst 00003001 INTL 20060912)
[    0.619680] ACPI: SSDT bf6c7a98 00303 (v01  PmRef    ApIst 00003000 INTL 20060912)
[    0.620212] ACPI: Dynamic OEM Table Load:
[    0.620214] ACPI: SSDT   (null) 00303 (v01  PmRef    ApIst 00003000 INTL 20060912)
[    0.643529] ACPI: SSDT bf6c5d98 00119 (v01  PmRef    ApCst 00003000 INTL 20060912)
[    0.644026] ACPI: Dynamic OEM Table Load:
[    0.644028] ACPI: SSDT   (null) 00119 (v01  PmRef    ApCst 00003000 INTL 20060912)
[    0.709521] Freeing initrd memory: 12500k freed
[    1.095280] ACPI: Interpreter enabled
[    1.095288] ACPI: (supports S0 S3 S4 S5)
[    1.095311] ACPI: Using IOAPIC for interrupt routing
[    1.096986] ACPI: Power Resource [APPR] (off)
[    1.110238] ACPI: EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62
[    1.110423] ACPI: No dock devices found.
[    1.110425] HEST: Table not found.
[    1.110428] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    1.111168] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[    1.111777] pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7]
[    1.111780] pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff]
[    1.111782] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[    1.111784] pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xdfffffff]
[    1.111786] pci_root PNP0A08:00: host bridge window [mem 0xf0000000-0xfedfffff]
[    1.111788] pci_root PNP0A08:00: host bridge window [mem 0xfee01000-0xffffffff]
[    1.111801] pci 0000:00:00.0: [8086:0044] type 0 class 0x000600
[    1.111819] DMAR: BIOS has allocated no shadow GTT; disabling IOMMU for graphics
[    1.111835] pci 0000:00:01.0: [8086:0045] type 1 class 0x000604
[    1.111860] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    1.111862] pci 0000:00:01.0: PME# disabled
[    1.111908] pci 0000:00:16.0: [8086:3b64] type 0 class 0x000780
[    1.111936] pci 0000:00:16.0: reg 10: [mem 0xd4604000-0xd460400f 64bit]
[    1.112010] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    1.112014] pci 0000:00:16.0: PME# disabled
[    1.112054] pci 0000:00:1a.0: [8086:3b3c] type 0 class 0x000c03
[    1.112079] pci 0000:00:1a.0: reg 10: [mem 0xd4609000-0xd46093ff]
[    1.112166] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    1.112170] pci 0000:00:1a.0: PME# disabled
[    1.112199] pci 0000:00:1b.0: [8086:3b56] type 0 class 0x000403
[    1.112220] pci 0000:00:1b.0: reg 10: [mem 0xd4600000-0xd4603fff 64bit]
[    1.112297] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    1.112301] pci 0000:00:1b.0: PME# disabled
[    1.112327] pci 0000:00:1c.0: [8086:3b42] type 1 class 0x000604
[    1.112405] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    1.112409] pci 0000:00:1c.0: PME# disabled
[    1.112437] pci 0000:00:1c.1: [8086:3b44] type 1 class 0x000604
[    1.112514] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    1.112518] pci 0000:00:1c.1: PME# disabled
[    1.112547] pci 0000:00:1c.3: [8086:3b48] type 1 class 0x000604
[    1.112625] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    1.112630] pci 0000:00:1c.3: PME# disabled
[    1.112658] pci 0000:00:1c.5: [8086:3b4c] type 1 class 0x000604
[    1.112736] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[    1.112740] pci 0000:00:1c.5: PME# disabled
[    1.112775] pci 0000:00:1d.0: [8086:3b34] type 0 class 0x000c03
[    1.112800] pci 0000:00:1d.0: reg 10: [mem 0xd4608000-0xd46083ff]
[    1.112886] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    1.112891] pci 0000:00:1d.0: PME# disabled
[    1.112914] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
[    1.112989] pci 0000:00:1f.0: [8086:3b0b] type 0 class 0x000601
[    1.113109] pci 0000:00:1f.2: [8086:3b2f] type 0 class 0x000106
[    1.113136] pci 0000:00:1f.2: reg 10: [io  0x6028-0x602f]
[    1.113146] pci 0000:00:1f.2: reg 14: [io  0x6034-0x6037]
[    1.113157] pci 0000:00:1f.2: reg 18: [io  0x6020-0x6027]
[    1.113168] pci 0000:00:1f.2: reg 1c: [io  0x6030-0x6033]
[    1.113179] pci 0000:00:1f.2: reg 20: [io  0x6000-0x601f]
[    1.113190] pci 0000:00:1f.2: reg 24: [mem 0xd4607000-0xd46077ff]
[    1.113237] pci 0000:00:1f.2: PME# supported from D3hot
[    1.113241] pci 0000:00:1f.2: PME# disabled
[    1.113274] pci 0000:00:1f.6: [8086:3b32] type 0 class 0x001180
[    1.113301] pci 0000:00:1f.6: reg 10: [mem 0xd4606000-0xd4606fff 64bit]
[    1.113413] pci 0000:01:00.0: [1002:9555] type 0 class 0x000300
[    1.113425] pci 0000:01:00.0: reg 10: [mem 0xc0000000-0xcfffffff pref]
[    1.113434] pci 0000:01:00.0: reg 14: [io  0x5000-0x50ff]
[    1.113443] pci 0000:01:00.0: reg 18: [mem 0xd4500000-0xd450ffff]
[    1.113474] pci 0000:01:00.0: reg 30: [mem 0xfffe0000-0xffffffff pref]
[    1.113495] pci 0000:01:00.0: supports D1 D2
[    1.113514] pci 0000:01:00.1: [1002:aa38] type 0 class 0x000403
[    1.113526] pci 0000:01:00.1: reg 10: [mem 0xd4510000-0xd4513fff]
[    1.113589] pci 0000:01:00.1: supports D1 D2
[    1.113613] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    1.113616] pci 0000:00:01.0:   bridge window [io  0x5000-0x5fff]
[    1.113618] pci 0000:00:01.0:   bridge window [mem 0xd4500000-0xd45fffff]
[    1.113622] pci 0000:00:01.0:   bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
[    1.113676] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[    1.113680] pci 0000:00:1c.0:   bridge window [io  0xf000-0x0000] (disabled)
[    1.113685] pci 0000:00:1c.0:   bridge window [mem 0xd4400000-0xd44fffff]
[    1.113692] pci 0000:00:1c.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[    1.113747] pci 0000:00:1c.1: PCI bridge to [bus 03-43]
[    1.113752] pci 0000:00:1c.1:   bridge window [io  0x3000-0x4fff]
[    1.113756] pci 0000:00:1c.1:   bridge window [mem 0xd0400000-0xd43fffff]
[    1.113763] pci 0000:00:1c.1:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[    1.113846] pci 0000:44:00.0: [168c:002b] type 0 class 0x000280
[    1.113874] pci 0000:44:00.0: reg 10: [mem 0xd0300000-0xd030ffff 64bit]
[    1.113983] pci 0000:44:00.0: supports D1
[    1.113985] pci 0000:44:00.0: PME# supported from D0 D1 D3hot
[    1.113991] pci 0000:44:00.0: PME# disabled
[    1.114033] pci 0000:00:1c.3: PCI bridge to [bus 44-44]
[    1.114038] pci 0000:00:1c.3:   bridge window [io  0xf000-0x0000] (disabled)
[    1.114042] pci 0000:00:1c.3:   bridge window [mem 0xd0300000-0xd03fffff]
[    1.114049] pci 0000:00:1c.3:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[    1.114120] pci 0000:45:00.0: [10ec:8168] type 0 class 0x000200
[    1.114136] pci 0000:45:00.0: reg 10: [io  0x2000-0x20ff]
[    1.114164] pci 0000:45:00.0: reg 18: [mem 0xd0004000-0xd0004fff 64bit pref]
[    1.114181] pci 0000:45:00.0: reg 20: [mem 0xd0000000-0xd0003fff 64bit pref]
[    1.114195] pci 0000:45:00.0: reg 30: [mem 0xfffe0000-0xffffffff pref]
[    1.114232] pci 0000:45:00.0: supports D1 D2
[    1.114233] pci 0000:45:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    1.114238] pci 0000:45:00.0: PME# disabled
[    1.114277] pci 0000:00:1c.5: PCI bridge to [bus 45-45]
[    1.114281] pci 0000:00:1c.5:   bridge window [io  0x2000-0x2fff]
[    1.114286] pci 0000:00:1c.5:   bridge window [mem 0xd0200000-0xd02fffff]
[    1.114293] pci 0000:00:1c.5:   bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
[    1.114366] pci 0000:00:1e.0: PCI bridge to [bus 46-46] (subtractive decode)
[    1.114370] pci 0000:00:1e.0:   bridge window [io  0xf000-0x0000] (disabled)
[    1.114375] pci 0000:00:1e.0:   bridge window [mem 0xd0100000-0xd01fffff]
[    1.114382] pci 0000:00:1e.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[    1.114384] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    1.114385] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
[    1.114387] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    1.114389] pci 0000:00:1e.0:   bridge window [mem 0xc0000000-0xdfffffff] (subtractive decode)
[    1.114391] pci 0000:00:1e.0:   bridge window [mem 0xf0000000-0xfedfffff] (subtractive decode)
[    1.114393] pci 0000:00:1e.0:   bridge window [mem 0xfee01000-0xffffffff] (subtractive decode)
[    1.114424] pci_bus 0000:00: on NUMA node 0
[    1.114427] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    1.114677] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
[    1.114729] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[    1.114784] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[    1.114819] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[    1.114875] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
[    1.114912] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT]
[    1.120541] ACPI: PCI Root Bridge [CPBG] (domain 0000 [bus ff])
[    1.120596] pci 0000:ff:00.0: [8086:2c62] type 0 class 0x000600
[    1.120613] pci 0000:ff:00.1: [8086:2d01] type 0 class 0x000600
[    1.120631] pci 0000:ff:02.0: [8086:2d10] type 0 class 0x000600
[    1.120647] pci 0000:ff:02.1: [8086:2d11] type 0 class 0x000600
[    1.120662] pci 0000:ff:02.2: [8086:2d12] type 0 class 0x000600
[    1.120678] pci 0000:ff:02.3: [8086:2d13] type 0 class 0x000600
[    1.120702] pci_bus 0000:ff: on NUMA node 0
[    1.120900] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[    1.120940] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 *5 6 7 11 12 14 15)
[    1.120978] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[    1.121016] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[    1.121054] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[    1.121092] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[    1.121130] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[    1.121169] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[    1.121268] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    1.121273] vgaarb: loaded
[    1.121427] SCSI subsystem initialized
[    1.121479] libata version 3.00 loaded.
[    1.121514] usbcore: registered new interface driver usbfs
[    1.121522] usbcore: registered new interface driver hub
[    1.121540] usbcore: registered new device driver usb
[    1.121858] wmi: Mapper loaded
[    1.121860] PCI: Using ACPI for IRQ routing
[    1.121862] PCI: pci_cache_line_size set to 64 bytes
[    1.121944] reserve RAM buffer: 000000000009fc00 - 000000000009ffff 
[    1.121946] reserve RAM buffer: 00000000befcf000 - 00000000bfffffff 
[    1.121948] reserve RAM buffer: 00000000bf800000 - 00000000bfffffff 
[    1.122034] NetLabel: Initializing
[    1.122036] NetLabel:  domain hash size = 128
[    1.122036] NetLabel:  protocols = UNLABELED CIPSOv4
[    1.122045] NetLabel:  unlabeled traffic allowed by default
[    1.122090] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    1.122095] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    1.124117] Switching to clocksource hpet
[    1.127023] Switched to NOHz mode on CPU #0
[    1.127083] Switched to NOHz mode on CPU #2
[    1.127122] Switched to NOHz mode on CPU #1
[    1.127142] Switched to NOHz mode on CPU #3
[    1.129419] AppArmor: AppArmor Filesystem Enabled
[    1.129440] pnp: PnP ACPI init
[    1.129455] ACPI: bus type pnp registered
[    1.129806] pnp 00:00: [bus 00-fe]
[    1.129808] pnp 00:00: [io  0x0000-0x0cf7 window]
[    1.129810] pnp 00:00: [io  0x0cf8-0x0cff]
[    1.129811] pnp 00:00: [io  0x0d00-0xffff window]
[    1.129813] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[    1.129814] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[    1.129816] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[    1.129818] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[    1.129819] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[    1.129821] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[    1.129822] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[    1.129824] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[    1.129826] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[    1.129827] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[    1.129829] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[    1.129830] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[    1.129832] pnp 00:00: [mem 0x000ec000-0x000effff window]
[    1.129834] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[    1.129835] pnp 00:00: [mem 0xc0000000-0xdfffffff window]
[    1.129837] pnp 00:00: [mem 0xf0000000-0xfedfffff window]
[    1.129839] pnp 00:00: [mem 0xfee01000-0xffffffff window]
[    1.129916] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[    1.130087] pnp 00:01: [mem 0xfed1c000-0xfed1ffff]
[    1.130089] pnp 00:01: [mem 0xfed10000-0xfed13fff]
[    1.130091] pnp 00:01: [mem 0xfed1b000-0xfed1bfff]
[    1.130092] pnp 00:01: [mem 0xfed19000-0xfed19fff]
[    1.130094] pnp 00:01: [mem 0xd4700000-0xd4700fff]
[    1.130095] pnp 00:01: [mem 0xe0000000-0xefffffff]
[    1.130097] pnp 00:01: [mem 0xfed20000-0xfed3ffff]
[    1.130098] pnp 00:01: [mem 0xfed90000-0xfed8ffff disabled]
[    1.130100] pnp 00:01: [mem 0xfed45000-0xfed8ffff]
[    1.130101] pnp 00:01: [mem 0xfec00000-0xfec00fff]
[    1.130149] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    1.130151] system 00:01: [mem 0xfed10000-0xfed13fff] has been reserved
[    1.130153] system 00:01: [mem 0xfed1b000-0xfed1bfff] has been reserved
[    1.130155] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
[    1.130157] system 00:01: [mem 0xd4700000-0xd4700fff] has been reserved
[    1.130159] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
[    1.130161] system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved
[    1.130163] system 00:01: [mem 0xfed45000-0xfed8ffff] has been reserved
[    1.130165] system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
[    1.130168] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.130240] pnp 00:02: [io  0x0000-0x001f]
[    1.130241] pnp 00:02: [io  0x0081-0x0091]
[    1.130243] pnp 00:02: [io  0x0093-0x009f]
[    1.130244] pnp 00:02: [io  0x00c0-0x00df]
[    1.130246] pnp 00:02: [dma 4]
[    1.130273] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[    1.130280] pnp 00:03: [mem 0xff000000-0xffffffff]
[    1.130306] pnp 00:03: Plug and Play ACPI device, IDs INT0800 (active)
[    1.130334] pnp 00:04: [io  0xfe00-0xfe0f]
[    1.130335] pnp 00:04: [io  0xfe80-0xfe8f]
[    1.130337] pnp 00:04: [mem 0xfed40000-0xfed44fff]
[    1.130379] system 00:04: [io  0xfe00-0xfe0f] has been reserved
[    1.130381] system 00:04: [io  0xfe80-0xfe8f] has been reserved
[    1.130384] system 00:04: [mem 0xfed40000-0xfed44fff] has been reserved
[    1.130386] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.130460] pnp 00:05: [mem 0xfed00000-0xfed003ff]
[    1.130491] pnp 00:05: Plug and Play ACPI device, IDs PNP0103 (active)
[    1.130500] pnp 00:06: [io  0x00f0]
[    1.130509] pnp 00:06: [irq 13]
[    1.130538] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
[    1.130546] pnp 00:07: [io  0x002e-0x002f]
[    1.130548] pnp 00:07: [io  0x004e-0x004f]
[    1.130549] pnp 00:07: [io  0x0061]
[    1.130550] pnp 00:07: [io  0x0063]
[    1.130552] pnp 00:07: [io  0x0065]
[    1.130553] pnp 00:07: [io  0x0067]
[    1.130554] pnp 00:07: [io  0x0070]
[    1.130555] pnp 00:07: [io  0x0080]
[    1.130557] pnp 00:07: [io  0x0092]
[    1.130558] pnp 00:07: [io  0x00b2-0x00b3]
[    1.130559] pnp 00:07: [io  0x0200-0x027f]
[    1.130561] pnp 00:07: [io  0x1000-0x100f]
[    1.130562] pnp 00:07: [io  0xffff]
[    1.130563] pnp 00:07: [io  0xffff]
[    1.130565] pnp 00:07: [io  0x0400-0x047f]
[    1.130566] pnp 00:07: [io  0x0500-0x057f]
[    1.130568] pnp 00:07: [io  0xef80-0xef9f]
[    1.130615] system 00:07: [io  0x0200-0x027f] has been reserved
[    1.130617] system 00:07: [io  0x1000-0x100f] has been reserved
[    1.130619] system 00:07: [io  0xffff] has been reserved
[    1.130620] system 00:07: [io  0xffff] has been reserved
[    1.130622] system 00:07: [io  0x0400-0x047f] has been reserved
[    1.130624] system 00:07: [io  0x0500-0x057f] has been reserved
[    1.130626] system 00:07: [io  0xef80-0xef9f] has been reserved
[    1.130628] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.130635] pnp 00:08: [io  0x0070-0x0077]
[    1.130640] pnp 00:08: [irq 8]
[    1.130669] pnp 00:08: Plug and Play ACPI device, IDs PNP0b00 (active)
[    1.130779] pnp 00:09: [io  0x0060]
[    1.130781] pnp 00:09: [io  0x0064]
[    1.130786] pnp 00:09: [irq 1]
[    1.130817] pnp 00:09: Plug and Play ACPI device, IDs PNP0303 (active)
[    1.130827] pnp 00:0a: [irq 12]
[    1.130858] pnp 00:0a: Plug and Play ACPI device, IDs SYN016a SYN0100 SYN0002 PNP0f13 (active)
[    1.131055] pnp 00:0b: [irq 23]
[    1.131093] pnp 00:0b: Plug and Play ACPI device, IDs HPQ0004 (active)
[    1.131214] pnp 00:0c: [bus ff]
[    1.131258] pnp 00:0c: Plug and Play ACPI device, IDs PNP0a03 (active)
[    1.131342] pnp: PnP ACPI: found 13 devices
[    1.131344] ACPI: ACPI bus type pnp unregistered
[    1.131347] PnPBIOS: Disabled by ACPI PNP
[    1.167068] pci 0000:01:00.0: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref]
[    1.167072] pci 0000:45:00.0: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref]
[    1.167130] pci 0000:00:1c.1: BAR 15: assigned [mem 0xd4800000-0xd49fffff 64bit pref]
[    1.167133] pci 0000:01:00.0: BAR 6: assigned [mem 0xd4520000-0xd453ffff pref]
[    1.167135] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    1.167137] pci 0000:00:01.0:   bridge window [io  0x5000-0x5fff]
[    1.167140] pci 0000:00:01.0:   bridge window [mem 0xd4500000-0xd45fffff]
[    1.167143] pci 0000:00:01.0:   bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
[    1.167146] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[    1.167147] pci 0000:00:1c.0:   bridge window [io  disabled]
[    1.167153] pci 0000:00:1c.0:   bridge window [mem 0xd4400000-0xd44fffff]
[    1.167158] pci 0000:00:1c.0:   bridge window [mem pref disabled]
[    1.167165] pci 0000:00:1c.1: PCI bridge to [bus 03-43]
[    1.167168] pci 0000:00:1c.1:   bridge window [io  0x3000-0x4fff]
[    1.167174] pci 0000:00:1c.1:   bridge window [mem 0xd0400000-0xd43fffff]
[    1.167178] pci 0000:00:1c.1:   bridge window [mem 0xd4800000-0xd49fffff 64bit pref]
[    1.167186] pci 0000:00:1c.3: PCI bridge to [bus 44-44]
[    1.167187] pci 0000:00:1c.3:   bridge window [io  disabled]
[    1.167193] pci 0000:00:1c.3:   bridge window [mem 0xd0300000-0xd03fffff]
[    1.167197] pci 0000:00:1c.3:   bridge window [mem pref disabled]
[    1.167205] pci 0000:45:00.0: BAR 6: assigned [mem 0xd0020000-0xd003ffff pref]
[    1.167207] pci 0000:00:1c.5: PCI bridge to [bus 45-45]
[    1.167210] pci 0000:00:1c.5:   bridge window [io  0x2000-0x2fff]
[    1.167216] pci 0000:00:1c.5:   bridge window [mem 0xd0200000-0xd02fffff]
[    1.167221] pci 0000:00:1c.5:   bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
[    1.167228] pci 0000:00:1e.0: PCI bridge to [bus 46-46]
[    1.167229] pci 0000:00:1e.0:   bridge window [io  disabled]
[    1.167235] pci 0000:00:1e.0:   bridge window [mem 0xd0100000-0xd01fffff]
[    1.167239] pci 0000:00:1e.0:   bridge window [mem pref disabled]
[    1.167255] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.167258] pci 0000:00:01.0: setting latency timer to 64
[    1.167267] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    1.167272] pci 0000:00:1c.0: setting latency timer to 64
[    1.167278] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[    1.167283] pci 0000:00:1c.1: setting latency timer to 64
[    1.167292] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[    1.167297] pci 0000:00:1c.3: setting latency timer to 64
[    1.167304] pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[    1.167309] pci 0000:00:1c.5: setting latency timer to 64
[    1.167316] pci 0000:00:1e.0: setting latency timer to 64
[    1.167320] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    1.167322] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    1.167324] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    1.167325] pci_bus 0000:00: resource 7 [mem 0xc0000000-0xdfffffff]
[    1.167327] pci_bus 0000:00: resource 8 [mem 0xf0000000-0xfedfffff]
[    1.167329] pci_bus 0000:00: resource 9 [mem 0xfee01000-0xffffffff]
[    1.167331] pci_bus 0000:01: resource 0 [io  0x5000-0x5fff]
[    1.167332] pci_bus 0000:01: resource 1 [mem 0xd4500000-0xd45fffff]
[    1.167334] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref]
[    1.167336] pci_bus 0000:02: resource 1 [mem 0xd4400000-0xd44fffff]
[    1.167338] pci_bus 0000:03: resource 0 [io  0x3000-0x4fff]
[    1.167339] pci_bus 0000:03: resource 1 [mem 0xd0400000-0xd43fffff]
[    1.167341] pci_bus 0000:03: resource 2 [mem 0xd4800000-0xd49fffff 64bit pref]
[    1.167343] pci_bus 0000:44: resource 1 [mem 0xd0300000-0xd03fffff]
[    1.167345] pci_bus 0000:45: resource 0 [io  0x2000-0x2fff]
[    1.167346] pci_bus 0000:45: resource 1 [mem 0xd0200000-0xd02fffff]
[    1.167348] pci_bus 0000:45: resource 2 [mem 0xd0000000-0xd00fffff 64bit pref]
[    1.167350] pci_bus 0000:46: resource 1 [mem 0xd0100000-0xd01fffff]
[    1.167351] pci_bus 0000:46: resource 4 [io  0x0000-0x0cf7]
[    1.167353] pci_bus 0000:46: resource 5 [io  0x0d00-0xffff]
[    1.167355] pci_bus 0000:46: resource 6 [mem 0x000a0000-0x000bffff]
[    1.167356] pci_bus 0000:46: resource 7 [mem 0xc0000000-0xdfffffff]
[    1.167358] pci_bus 0000:46: resource 8 [mem 0xf0000000-0xfedfffff]
[    1.167360] pci_bus 0000:46: resource 9 [mem 0xfee01000-0xffffffff]
[    1.167383] NET: Registered protocol family 2
[    1.167434] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    1.167585] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    1.167791] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    1.167886] TCP: Hash tables configured (established 131072 bind 65536)
[    1.167888] TCP reno registered
[    1.167890] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    1.167895] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    1.167964] NET: Registered protocol family 1
[    1.168038] pci 0000:01:00.0: Boot video device
[    1.168064] PCI: CLS 64 bytes, default 64
[    1.168310] cpufreq-nforce2: No nForce2 chipset.
[    1.168444] audit: initializing netlink socket (disabled)
[    1.168451] type=2000 audit(1314156444.012:1): initialized
[    1.176558] highmem bounce pool size: 64 pages
[    1.176563] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    1.177795] VFS: Disk quotas dquot_6.5.2
[    1.177840] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    1.178321] fuse init (API version 7.16)
[    1.178388] msgmni has been set to 1635
[    1.178587] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    1.178610] io scheduler noop registered
[    1.178612] io scheduler deadline registered
[    1.178623] io scheduler cfq registered (default)
[    1.178706] pcieport 0000:00:01.0: setting latency timer to 64
[    1.178732] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[    1.178993] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.179011] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.179053] intel_idle: MWAIT substates: 0x1120
[    1.179054] intel_idle: v0.4 model 0x25
[    1.179055] intel_idle: lapic_timer_reliable_states 0xffffffff
[    1.179199] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[    1.179284] ACPI: AC Adapter [AC] (on-line)
[    1.179462] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input0
[    1.179467] ACPI: Sleep Button [SLPB]
[    1.179498] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
[    1.179520] ACPI: Lid Switch [LID]
[    1.179551] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    1.179553] ACPI: Power Button [PWRF]
[    1.179746] ACPI: acpi_idle yielding to intel_idle
[    1.187934] thermal LNXTHERM:00: registered as thermal_zone0
[    1.187936] ACPI: Thermal Zone [EXTZ] (58 C)
[    1.187975] thermal LNXTHERM:01: registered as thermal_zone1
[    1.187976] ACPI: Thermal Zone [EX2Z] (0 C)
[    1.188018] thermal LNXTHERM:02: registered as thermal_zone2
[    1.188019] ACPI: Thermal Zone [PWMZ] (0 C)
[    1.190594] thermal LNXTHERM:03: registered as thermal_zone3
[    1.190595] ACPI: Thermal Zone [LOCZ] (40 C)
[    1.191047] thermal LNXTHERM:04: registered as thermal_zone4
[    1.191049] ACPI: Thermal Zone [GFXZ] (0 C)
[    1.202628] thermal LNXTHERM:05: registered as thermal_zone5
[    1.202630] ACPI: Thermal Zone [BATZ] (29 C)
[    1.212396] thermal LNXTHERM:06: registered as thermal_zone6
[    1.212398] ACPI: Thermal Zone [EGXZ] (65 C)
[    1.212589] thermal LNXTHERM:07: registered as thermal_zone7
[    1.212590] ACPI: Thermal Zone [CPUZ] (59 C)
[    1.212753] thermal LNXTHERM:08: registered as thermal_zone8
[    1.212755] ACPI: Thermal Zone [MCHZ] (60 C)
[    1.212911] thermal LNXTHERM:09: registered as thermal_zone9
[    1.212913] ACPI: Thermal Zone [PCHZ] (60 C)
[    1.212932] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[    1.212987] ERST: Table is not found!
[    1.213069] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    1.213203] isapnp: Scanning for PnP cards...
[    1.267553] ACPI: Battery Slot [BAT0] (battery present)
[    1.568437] isapnp: No Plug & Play device found
[    1.576573] Linux agpgart interface v0.103
[    1.577538] brd: module loaded
[    1.577949] loop: module loaded
[    1.578017] i2c-core: driver [adp5520] using legacy suspend method
[    1.578018] i2c-core: driver [adp5520] using legacy resume method
[    1.578322] Fixed MDIO Bus: probed
[    1.578344] PPP generic driver version 2.4.2
[    1.578371] tun: Universal TUN/TAP device driver, 1.6
[    1.578372] tun: (C) 1999-2004 Max Krasnyansky <maxk@xxxxxxxxxxxx>
[    1.578436] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.578451] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.578463] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[    1.578466] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[    1.578492] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    1.578536] ehci_hcd 0000:00:1a.0: debug port 2
[    1.582438] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
[    1.582453] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xd4609000
[    1.595824] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    1.595972] hub 1-0:1.0: USB hub found
[    1.595976] hub 1-0:1.0: 2 ports detected
[    1.596031] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[    1.596041] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[    1.596044] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[    1.596073] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    1.596118] ehci_hcd 0000:00:1d.0: debug port 2
[    1.600004] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
[    1.600017] ehci_hcd 0000:00:1d.0: irq 20, io mem 0xd4608000
[    1.615812] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    1.615951] hub 2-0:1.0: USB hub found
[    1.615953] hub 2-0:1.0: 2 ports detected
[    1.616003] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.616012] uhci_hcd: USB Universal Host Controller Interface driver
[    1.616070] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    1.617856] i8042: Detected active multiplexing controller, rev 1.1
[    1.618620] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.618626] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    1.618633] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    1.618634] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    1.618636] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    1.618757] mousedev: PS/2 mouse device common for all mice
[    1.618881] rtc_cmos 00:08: RTC can wake from S4
[    1.618931] rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0
[    1.618962] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    1.619017] device-mapper: uevent: version 1.0.3
[    1.619073] device-mapper: ioctl: 4.19.1-ioctl (2011-01-07) initialised: dm-devel@xxxxxxxxxx
[    1.619124] device-mapper: multipath: version 1.2.0 loaded
[    1.619127] device-mapper: multipath round-robin: version 1.0.0 loaded
[    1.619176] EISA: Probing bus 0 at eisa.0
[    1.619178] EISA: Cannot allocate resource for mainboard
[    1.619179] Cannot allocate resource for EISA slot 1
[    1.619180] Cannot allocate resource for EISA slot 2
[    1.619182] Cannot allocate resource for EISA slot 3
[    1.619183] Cannot allocate resource for EISA slot 4
[    1.619184] Cannot allocate resource for EISA slot 5
[    1.619185] Cannot allocate resource for EISA slot 6
[    1.619186] Cannot allocate resource for EISA slot 7
[    1.619188] Cannot allocate resource for EISA slot 8
[    1.619189] EISA: Detected 0 cards.
[    1.619311] cpuidle: using governor ladder
[    1.619438] cpuidle: using governor menu
[    1.619619] TCP cubic registered
[    1.619715] NET: Registered protocol family 10
[    1.620175] NET: Registered protocol family 17
[    1.620186] Registering the dns_resolver key type
[    1.621080] Using IPI No-Shortcut mode
[    1.621149] PM: Hibernation image not present or could not be loaded.
[    1.621156] registered taskstats version 1
[    1.621471]   Magic number: 7:58:463
[    1.621606] rtc_cmos 00:08: setting system clock to 2011-08-24 03:27:24 UTC (1314156444)
[    1.621608] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.621609] EDD information not available.
[    1.621820] Freeing unused kernel memory: 720k freed
[    1.622083] Write protecting the kernel text: 5352k
[    1.622183] Write protecting the kernel read-only data: 2188k
[    1.622184] NX-protecting the kernel data: 4888k
[    1.640624] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    1.644013] <30>udev[72]: starting version 167
[    1.701734] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    1.701758] r8169 0000:45:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    1.701799] r8169 0000:45:00.0: setting latency timer to 64
[    1.701858] r8169 0000:45:00.0: irq 41 for MSI/MSI-X
[    1.702238] r8169 0000:45:00.0: eth0: RTL8168d/8111d at 0xf846c000, 1c:c1:de:fb:17:ab, XID 083000c0 IRQ 41
[    1.705345] ahci 0000:00:1f.2: version 3.0
[    1.705367] ahci 0000:00:1f.2: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[    1.705419] ahci 0000:00:1f.2: irq 42 for MSI/MSI-X
[    1.705464] ahci: SSS flag set, parallel bus scan disabled
[    1.705511] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x13 impl SATA mode
[    1.705515] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems sxs apst 
[    1.705522] ahci 0000:00:1f.2: setting latency timer to 64
[    1.722369] scsi0 : ahci
[    1.722511] scsi1 : ahci
[    1.722592] scsi2 : ahci
[    1.722676] scsi3 : ahci
[    1.722759] scsi4 : ahci
[    1.722848] scsi5 : ahci
[    1.723184] ata1: SATA max UDMA/133 abar m2048@0xd4607000 port 0xd4607100 irq 42
[    1.723189] ata2: SATA max UDMA/133 abar m2048@0xd4607000 port 0xd4607180 irq 42
[    1.723192] ata3: DUMMY
[    1.723193] ata4: DUMMY
[    1.723197] ata5: SATA max UDMA/133 abar m2048@0xd4607000 port 0xd4607300 irq 42
[    1.723199] ata6: DUMMY
[    1.907737] usb 1-1: new high speed USB device using ehci_hcd and address 2
[    2.039664] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.040367] hub 1-1:1.0: USB hub found
[    2.040410] ata1.00: unexpected _GTF length (8)
[    2.040522] hub 1-1:1.0: 6 ports detected
[    2.040638] ata1.00: ATA-8: Hitachi HTS725050A9A364, PC4OC72E, max UDMA/100
[    2.040645] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    2.041464] ata1.00: unexpected _GTF length (8)
[    2.041643] ata1.00: configured for UDMA/100
[    2.041779] scsi 0:0:0:0: Direct-Access     ATA      Hitachi HTS72505 PC4O PQ: 0 ANSI: 5
[    2.041963] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    2.041966] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[    2.042024] sd 0:0:0:0: [sda] Write Protect is off
[    2.042027] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.042064] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.098114]  sda: sda1 sda2 sda3 < sda5 sda6 sda7 sda8 > sda4
[    2.098636] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.151624] usb 2-1: new high speed USB device using ehci_hcd and address 2
[    2.167576] Refined TSC clocksource calibration: 2526.982 MHz.
[    2.167581] Switching to clocksource tsc
[    2.284187] hub 2-1:1.0: USB hub found
[    2.284415] hub 2-1:1.0: 8 ports detected
[    2.355649] usb 1-1.1: new full speed USB device using ehci_hcd and address 3
[    2.523563] usb 1-1.4: new full speed USB device using ehci_hcd and address 4
[    2.616998] hub 1-1.4:1.0: USB hub found
[    2.617199] hub 1-1.4:1.0: 4 ports detected
[    2.687470] usb 1-1.5: new full speed USB device using ehci_hcd and address 5
[    2.763255] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.782547] ata2.00: unexpected _GTF length (8)
[    2.782553] ata2.00: ATAPI: hp       CDDVDW TS-L633N, 0300, max UDMA/100
[    2.803618] ata2.00: unexpected _GTF length (8)
[    2.803625] ata2.00: configured for UDMA/100
[    2.808701] scsi 1:0:0:0: CD-ROM            hp       CDDVDW TS-L633N  0300 PQ: 0 ANSI: 5
[    2.817236] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.817241] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.817419] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    2.817485] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    2.831389] usb 1-1.5: new high speed USB device using ehci_hcd and address 6
[    3.031275] usb 2-1.1: new low speed USB device using ehci_hcd and address 3
[    3.135018] ata5: SATA link down (SStatus 0 SControl 300)
[    3.142288] input:  USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/input/input4
[    3.142414] generic-usb 0003:15D9:0A4C.0001: input,hidraw0: USB HID v1.11 Mouse [ USB OPTICAL MOUSE] on usb-0000:00:1d.0-1.1/input0
[    3.142430] usbcore: registered new interface driver usbhid
[    3.142432] usbhid: USB HID core driver
[    3.807697] EXT3-fs: barriers not enabled
[    3.817551] kjournald starting.  Commit interval 5 seconds
[    3.817591] EXT3-fs (sda6): mounted filesystem with ordered data mode
[   12.286148] Adding 999420k swap on /dev/sda8.  Priority:-1 extents:1 across:999420k 
[   12.306644] <30>udev[359]: starting version 167
[   12.319403] lp: driver loaded but no devices found
[   12.359060] hp_accel: hardware type HPB452x found
[   12.362340] lis3lv02d: 8 bits sensor found
[   12.368705] acpi device:04: registered as cooling_device4
[   12.369560] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:03/LNXVIDEO:00/input/input5
[   12.369627] ACPI: Video Device [DGFX] (multi-head: yes  rom: no  post: no)
[   12.405901] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input6
[   12.406046] Registered led device: hp::hddprotect
[   12.406069] hp_accel: driver loaded
[   12.423942] [drm] Initialized drm 1.1.0 20060810
[   12.449466] cfg80211: Calling CRDA to update world regulatory domain
[   12.473503] type=1400 audit(1314140255.351:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=565 comm="apparmor_parser"
[   12.474205] type=1400 audit(1314140255.355:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=565 comm="apparmor_parser"
[   12.474683] type=1400 audit(1314140255.355:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=565 comm="apparmor_parser"
[   12.541620] intel ips 0000:00:1f.6: CPU TDP doesn't match expected value (found 25, expected 29)
[   12.541647] intel ips 0000:00:1f.6: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[   12.541801] intel ips 0000:00:1f.6: failed to get i915 symbols, graphics turbo disabled
[   12.553019] intel ips 0000:00:1f.6: IPS driver initialized, MCP temp limit 90
[   12.560863] Linux video capture interface: v2.00
[   12.563431] EXT3-fs (sda6): using internal journal
[   12.578011] Bluetooth: Core ver 2.15
[   12.578065] NET: Registered protocol family 31
[   12.578067] Bluetooth: HCI device and connection manager initialized
[   12.578071] Bluetooth: HCI socket layer initialized
[   12.609467] Bluetooth: Generic Bluetooth USB driver ver 0.6
[   12.610823] usbcore: registered new interface driver btusb
[   12.611695] uvcvideo: Found UVC 1.00 device Villem (0461:4db6)
[   12.619524] input: Villem as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.0/input/input7
[   12.619665] usbcore: registered new interface driver uvcvideo
[   12.619668] USB Video Class driver (v1.0.0)
[   12.633317] [drm] radeon defaulting to kernel modesetting.
[   12.633320] [drm] radeon kernel modesetting enabled.
[   12.633386] radeon 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   12.633392] radeon 0000:01:00.0: setting latency timer to 64
[   12.634330] [drm] initializing kernel modesetting (RV710 0x1002:0x9555).
[   12.634370] [drm] register mmio base: 0xD4500000
[   12.634372] [drm] register mmio size: 65536
[   12.634487] ATOM BIOS: BR037694.001
[   12.634512] radeon 0000:01:00.0: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used)
[   12.634516] radeon 0000:01:00.0: GTT: 512M 0x0000000020000000 - 0x000000003FFFFFFF
[   12.635522] [drm] Detected VRAM RAM=512M, BAR=256M
[   12.635525] [drm] RAM width 64bits DDR
[   12.635756] [TTM] Zone  kernel: Available graphics memory: 418922 kiB.
[   12.635759] [TTM] Zone highmem: Available graphics memory: 1985550 kiB.
[   12.635761] [TTM] Initializing pool allocator.
[   12.635783] [drm] radeon: 512M of VRAM memory ready
[   12.635786] [drm] radeon: 512M of GTT memory ready.
[   12.635805] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[   12.635807] [drm] Driver supports precise vblank timestamp query.
[   12.635849] radeon 0000:01:00.0: irq 43 for MSI/MSI-X
[   12.635855] radeon 0000:01:00.0: radeon: using MSI.
[   12.635888] [drm] radeon: irq initialized.
[   12.635891] [drm] GART: num cpu pages 131072, num gpu pages 131072
[   12.636642] [drm] Loading RV710 Microcode
[   12.644714] radeon 0000:01:00.0: WB enabled
[   12.651829] ath9k 0000:44:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[   12.651841] ath9k 0000:44:00.0: setting latency timer to 64
[   12.691006] [drm] ring test succeeded in 1 usecs
[   12.691139] [drm] radeon: ib pool ready.
[   12.691210] [drm] ib test succeeded in 0 usecs
[   12.691211] [drm] Enabling audio support
[   12.691760] [drm] Radeon Display Connectors
[   12.691763] [drm] Connector 0:
[   12.691765] [drm]   VGA
[   12.691767] [drm]   DDC: 0x7fa0 0x7fa0 0x7fa4 0x7fa4 0x7fa8 0x7fa8 0x7fac 0x7fac
[   12.691769] [drm]   Encoders:
[   12.691771] [drm]     CRT1: INTERNAL_KLDSCP_DAC1
[   12.691772] [drm] Connector 1:
[   12.691774] [drm]   LVDS
[   12.691776] [drm]   DDC: 0x7f68 0x7f68 0x7f6c 0x7f6c 0x7f70 0x7f70 0x7f74 0x7f74
[   12.691777] [drm]   Encoders:
[   12.691779] [drm]     LCD1: INTERNAL_UNIPHY2
[   12.691780] [drm] Connector 2:
[   12.691782] [drm]   HDMI-A
[   12.691783] [drm]   HPD1
[   12.691785] [drm]   DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
[   12.691787] [drm]   Encoders:
[   12.691788] [drm]     DFP1: INTERNAL_UNIPHY
[   12.703117] ath: EEPROM regdomain: 0x60
[   12.703118] ath: EEPROM indicates we should expect a direct regpair map
[   12.703121] ath: Country alpha2 being used: 00
[   12.703123] ath: Regpair used: 0x60
[   12.703126] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[   12.703128] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (N/A mBi, 2000 mBm)
[   12.703129] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[   12.703131] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (N/A mBi, 2000 mBm)
[   12.703133] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[   12.703134] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (N/A mBi, 2000 mBm)
[   12.703136] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[   12.703138] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (N/A mBi, 2000 mBm)
[   12.703139] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[   12.703141] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (N/A mBi, 2000 mBm)
[   12.703142] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[   12.703144] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (N/A mBi, 2000 mBm)
[   12.703145] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[   12.703147] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (N/A mBi, 2000 mBm)
[   12.703148] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[   12.703150] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (N/A mBi, 2000 mBm)
[   12.703152] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[   12.703153] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (N/A mBi, 2000 mBm)
[   12.703155] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[   12.703157] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (N/A mBi, 2000 mBm)
[   12.703158] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[   12.703160] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (N/A mBi, 2000 mBm)
[   12.703161] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[   12.703163] cfg80211: 2457000 KHz - 2482000 KHz @  KHz), (N/A mBi, 2000 mBm)
[   12.703164] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[   12.703166] cfg80211: 2457000 KHz - 2482000 KHz @  KHz), (N/A mBi, 2000 mBm)
[   12.703167] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule:
[   12.703169] cfg80211: 2474000 KHz - 2494000 KHz @  KHz), (N/A mBi, 2000 mBm)
[   12.704549] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain 
[   12.708328] ieee80211 phy0: Selected rate control algorithm 'ath9k_rate_control'
[   12.708891] Registered led device: ath9k-phy0::radio
[   12.708912] Registered led device: ath9k-phy0::assoc
[   12.708935] Registered led device: ath9k-phy0::tx
[   12.708960] Registered led device: ath9k-phy0::rx
[   12.708967] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xf8740000, irq=19
[   12.711481] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain 
[   12.711486] cfg80211: World regulatory domain updated:
[   12.711489] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   12.711491] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   12.711494] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   12.711497] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   12.711499] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   12.711502] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   12.753385] [drm] radeon: power management initialized
[   12.786175] input: HP WMI hotkeys as /devices/virtual/input/input8
[   12.868230] HDA Intel 0000:00:1b.0: power state changed by ACPI to D0
[   12.868244] HDA Intel 0000:00:1b.0: power state changed by ACPI to D0
[   12.868258] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[   12.868339] HDA Intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[   12.868370] HDA Intel 0000:00:1b.0: setting latency timer to 64
[   12.945752] input: HDA Intel Mic at Ext Left Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[   12.945893] input: HDA Intel HP Out at Ext Left Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[   13.003658] EXT3-fs: barriers not enabled
[   13.003951] kjournald starting.  Commit interval 5 seconds
[   13.004147] EXT3-fs (sda5): using internal journal
[   13.004155] EXT3-fs (sda5): mounted filesystem with ordered data mode
[   13.207584] [drm] fb mappable at 0xC0142000
[   13.207587] [drm] vram apper at 0xC0000000
[   13.207588] [drm] size 4325376
[   13.207589] [drm] fb depth is 24
[   13.207590] [drm]    pitch is 5632
[   13.207746] Console: switching to colour frame buffer device 170x48
[   13.207781] fb0: radeondrmfb frame buffer device
[   13.207782] drm: registered panic notifier
[   13.207853] [drm] Initialized radeon 2.8.0 20080528 for 0000:01:00.0 on minor 0
[   13.207895] HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[   13.207958] HDA Intel 0000:01:00.1: irq 45 for MSI/MSI-X
[   13.207986] HDA Intel 0000:01:00.1: setting latency timer to 64
[   13.273957] Synaptics Touchpad, model: 1, fw: 7.4, id: 0x1e0b1, caps: 0xd04773/0xe40000/0x5a0400
[   13.317896] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input11
[   13.987700] EXT3-fs: barriers not enabled
[   13.987862] kjournald starting.  Commit interval 5 seconds
[   13.988037] EXT3-fs (sda7): using internal journal
[   13.988042] EXT3-fs (sda7): mounted filesystem with ordered data mode
[   14.320144] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   14.328170] type=1400 audit(1314140257.207:5): apparmor="STATUS" operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" pid=951 comm="apparmor_parser"
[   14.328501] type=1400 audit(1314140257.207:6): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=952 comm="apparmor_parser"
[   14.329172] type=1400 audit(1314140257.211:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=952 comm="apparmor_parser"
[   14.329618] type=1400 audit(1314140257.211:8): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=952 comm="apparmor_parser"
[   14.330826] type=1400 audit(1314140257.211:9): apparmor="STATUS" operation="profile_load" name="/usr/sbin/tcpdump" pid=957 comm="apparmor_parser"
[   14.334657] type=1400 audit(1314140257.215:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=955 comm="apparmor_parser"
[   14.334919] type=1400 audit(1314140257.215:11): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=953 comm="apparmor_parser"
[   14.381750] ppdev: user-space parallel port driver
[   14.395674] r8169 0000:45:00.0: eth0: link down
[   14.395879] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   14.559343] Bluetooth: L2CAP ver 2.15
[   14.559347] Bluetooth: L2CAP socket layer initialized
[   14.566147] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   14.566150] Bluetooth: BNEP filters: protocol multicast
[   14.569930] Bluetooth: SCO (Voice Link) ver 0.6
[   14.569933] Bluetooth: SCO socket layer initialized
[   14.606862] Bluetooth: RFCOMM TTY layer initialized
[   14.606868] Bluetooth: RFCOMM socket layer initialized
[   14.606870] Bluetooth: RFCOMM ver 1.11
[   15.947458] hda-intel: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj.
[   42.996938] usb 2-1.2: new high speed USB device using ehci_hcd and address 4
[   43.248224] usbcore: registered new interface driver uas
[   43.253065] Initializing USB Mass Storage driver...
[   43.253213] scsi6 : usb-storage 2-1.2:1.0
[   43.253338] usbcore: registered new interface driver usb-storage
[   43.253340] USB Mass Storage support registered.
[   44.253548] scsi 6:0:0:0: CD-ROM            HSPA     USB SCSI CD-ROM  2.31 PQ: 0 ANSI: 2
[   44.256733] sr1: scsi-1 drive
[   44.256937] sr 6:0:0:0: Attached scsi CD-ROM sr1
[   44.257315] sr 6:0:0:0: Attached scsi generic sg2 type 5
[   45.357501] usb 2-1.2: USB disconnect, address 4
[   45.639463] usb 2-1.2: new high speed USB device using ehci_hcd and address 5
[   45.737262] scsi7 : usb-storage 2-1.2:1.2
[   46.738109] scsi 7:0:0:0: CD-ROM            HSPA     USB SCSI CD-ROM  2.31 PQ: 0 ANSI: 2
[   46.738976] scsi 7:0:0:1: Direct-Access     D-Link   MMC Storage      2.31 PQ: 0 ANSI: 2
[   46.745479] sr1: scsi-1 drive
[   46.745735] sr 7:0:0:0: Attached scsi CD-ROM sr1
[   46.746358] sr 7:0:0:0: Attached scsi generic sg2 type 5
[   46.746615] sd 7:0:0:1: Attached scsi generic sg3 type 0
[   46.773516] sd 7:0:0:1: [sdb] Attached SCSI removable disk
[   63.423902] ISO 9660 Extensions: Microsoft Joliet Level 1
[   63.439641] ISOFS: changing to secondary root
[ 1123.081516] hub 1-1.4:1.0: hub_port_status failed (err = -32)
[ 1123.081842] hub 1-1.4:1.0: hub_port_status failed (err = -32)
[ 1123.082093] hub 1-1.4:1.0: hub_port_status failed (err = -32)
[ 1123.082343] hub 1-1.4:1.0: hub_port_status failed (err = -32)

Module                  Size  Used by
nls_utf8               12493  1 
isofs                  39571  1 
usb_storage            43946  1 
uas                    17676  0 
binfmt_misc            13213  1 
rfcomm                 38125  8 
sco                    17779  2 
bnep                   17785  2 
l2cap                  48656  16 rfcomm,bnep
parport_pc             32111  0 
ppdev                  12849  0 
snd_hda_codec_hdmi     27479  1 
snd_hda_codec_idt      60537  1 
arc4                   12473  2 
snd_hda_intel          24140  2 
snd_hda_codec          90901  3 snd_hda_codec_hdmi,snd_hda_codec_idt,snd_hda_intel
snd_hwdep              13274  1 snd_hda_codec
ath9k                 103669  0 
snd_pcm                80244  3 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec
snd_seq_midi           13132  0 
radeon                925124  3 
snd_rawmidi            25269  1 snd_seq_midi
uvcvideo               66851  0 
btusb                  18160  2 
snd_seq_midi_event     14475  1 snd_seq_midi
joydev                 17322  0 
snd_seq                51291  2 snd_seq_midi,snd_seq_midi_event
hp_wmi                 13418  0 
sparse_keymap          13666  1 hp_wmi
ttm                    65184  1 radeon
snd_timer              28659  2 snd_pcm,snd_seq
intel_ips              17769  0 
mac80211              257001  1 ath9k
bluetooth              65565  9 rfcomm,sco,bnep,l2cap,btusb
videodev               75143  1 uvcvideo
drm_kms_helper         40745  1 radeon
snd_seq_device         14110  3 snd_seq_midi,snd_rawmidi,snd_seq
ath9k_common           13611  1 ath9k
ath9k_hw              300328  2 ath9k,ath9k_common
ath                    19141  2 ath9k,ath9k_hw
cfg80211              156212  3 ath9k,mac80211,ath
psmouse                59039  0 
serio_raw              12990  0 
snd                    55295  14 snd_hda_codec_hdmi,snd_hda_codec_idt,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
drm                   184133  5 radeon,ttm,drm_kms_helper
soundcore              12600  1 snd
snd_page_alloc         14073  2 snd_hda_intel,snd_pcm
i2c_algo_bit           13184  1 radeon
hp_accel               21632  0 
video                  18951  0 
lis3lv02d              19285  1 hp_accel
input_polldev          13735  1 lis3lv02d
lp                     13349  0 
parport                36746  3 parport_pc,ppdev,lp
usbhid                 41704  0 
hid                    77084  1 usbhid
ahci                   21591  5 
r8169                  46630  0 
libahci                25548  1 ahci

[Index of Archives]     [Linux Media Development]     [Asterisk]     [DCCP]     [Netdev]     [X.org]     [Xfree86]     [Fedora Women]     [Linux USB]

  Powered by Linux