James, Thailand (English) kernel 2.6.38-11-generic (AMD64)

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Only plain text email is forwarded by the  Discuss@xxxxxxxxxxxxx List
Server,
as HTML can contain viruses. Use as the email Subject Line:
           YourName, YourCountry  kernel 2.6.38-11-generic 
With this Subject Line cogent experts will be alerted, and useful case
names left in the Archive.
YourCountry will enable Country specific guidance. Linux experts in
YourCountry 
can be found through: http://www.linux.org/groups/index.html.
They will know your Country's modem code, which may be essential for
dialup service.
Responses from Discuss@xxxxxxxxxxxxx are sometimes blocked by an
Internet Provider mail filters.
So in a day, also check the Archived responses at
http://www.linmodems.org 
--------------------------  System information
----------------------------
CPU=x86_64,  Ubuntu ,  ALSA_version=1.0.23
Linux version 2.6.38-11-generic (buildd@allspice) (gcc version 4.5.2
(Ubuntu/Linaro 4.5.2-8ubuntu4) ) #48-Ubuntu SMP Fri Jul 29 19:02:55 UTC
2011
scanModem update of:  2011_08_08

Distrib_ID=Ubuntu
DistribCodeName=natty
AptRepositoryStem=http://th.archive.ubuntu.com/ubuntu/


The dkms driver upgrade utilities are installed,


Some modem drivers can only be used in 32 bit modem on x86_64 systems,
while some others are competent on x86_64 Systems.  Cases are:
1)
http://linmodems.technion.ac.il/bigarch/archive-seventh/msg03119.html 
for the snd-hda-intel audio+modem driver. Also applicable to AC97 modem
controllers.
In both cases, 32 bit libraries must be installed to support the
slmodemd helper having a precompiled 32 bit component.
2) For USB modems using the slusb.ko driver. 32 bit libraries must be
installed to support the slmodemd helper having a precompiled 32 bit
component
3) The hsfmodem and hcfpcimodem drivers for Conexant chipsest modes are
x86_64 competent.
4) agrsm packages for LSI/AgereSystems softmodems are not competent on
x86_64 systems.

There are no blacklisted modem drivers in /etc/modprobe*  files 

Potentially useful modem drivers now loaded are:
  snd_atiixp_modem snd_via82xx_modem snd_intel8x0m
snd_hda_intel           

Attached USB devices are:
ID 093a:260f Pixart Imaging, Inc. PAC7311 SnakeCam
ID 12d1:1001 Huawei Technologies Co., Ltd. E620 USB Modem
ID 08ec:2039 M-Systems Flash Disk Pioneers TravelDrive
ID 0409:005a NEC Corp. HighSpeed Hub
ID 046d:c05b Logitech, Inc. 
ID 0a12:0001 Cambridge Silicon Radio, Ltd Bluetooth Dongle (HCI mode)
ID 04e8:341b Samsung Electronics Co., Ltd SCX-4200 series
ID 0409:005a NEC Corp. HighSpeed Hub
If a cellphone is not detected, see
http://ubuntuforums.org/archive/index.php/t-878554.html
A sample report is:
http://linmodems.technion.ac.il/bigarch/archive-nineth/msg00578.html

If a USB modem or cellphone is attached and was not detected, please
provide available information in your request to discuss@xxxxxxxxxxxxx

Candidate PCI devices with modem chips are:
02:07.0 Communication controller: Conexant Systems, Inc. HCF 56k Modem
(rev 08)
00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA)
High Definition Audio cards can host modem chips.

For candidate card in slot 02:07.0, firmware information and bootup
diagnostics are:
PCI slot PCI ID SubsystemID Name
---------- --------- --------- --------------
02:07.0 14f1:1025 14f1:1025 Communication controller: Conexant Systems,
Inc. HCF 56k Modem 

Modem interrupt assignment and sharing: 
--- Bootup diagnostics for card in PCI slot 02:07.0 ----
[    0.810082] pci 0000:02:07.0: [14f1:1025] type 0 class 0x000780
[    0.810101] pci 0000:02:07.0: reg 10: [mem 0xbead0000-0xbeadffff]
[    0.810115] pci 0000:02:07.0: reg 14: [io  0xd800-0xd807]
[    0.813653] pci 0000:02:07.0: no compatible bridge window for [mem
0xbead0000-0xbeadffff]
[    0.826238] pci 0000:02:07.0: BAR 0: assigned [mem
0xfeb00000-0xfeb0ffff]
[    0.826244] pci 0000:02:07.0: BAR 0: error updating (0xfeb00000 !=
0xbea00000)
[    0.826246] pci 0000:02:07.0: BAR 0: set to [mem
0xfeb00000-0xfeb0ffff] (PCI address [0xfeb00000-0xfeb0ffff])

For candidate card in slot 00:14.2, firmware information and bootup
diagnostics are:
PCI slot PCI ID SubsystemID Name
---------- --------- --------- --------------
00:14.2 1002:4383 1849:0397 Audio device: ATI Technologies Inc SBx00
Azalia 

Modem interrupt assignment and sharing: 
41:          0          2         38       2714   PCI-MSI-edge
hda_intel
--- Bootup diagnostics for card in PCI slot 00:14.2 ----
[    0.772173] pci 0000:00:14.2: [1002:4383] type 0 class 0x000403
[    0.772200] pci 0000:00:14.2: reg 10: [mem 0xf9ff4000-0xf9ff7fff
64bit]
[    0.772271] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[    0.772275] pci 0000:00:14.2: PME# disabled
[   14.236826] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low)
-> IRQ 16
[   14.236908] HDA Intel 0000:00:14.2: irq 41 for MSI/MSI-X

The PCI slot 00:14.2 of the modem card may be disabled early in 
a bootup process,  but then enabled later. If modem drivers load 
but the  modem is not responsive, read DOCs/Bootup.txt about possible
fixes.
Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx
if help is needed.


New HCF.HSF device 1002:4383
=== Finished firmware and bootup diagnostics, next deducing cogent
software. ===

Predictive  diagnostics for card in bus 00:14.2:
Modem chipset  detected on
NAME="Audio device: ATI Technologies Inc SBx00 Azalia "
package="both hcfpcimodem and hsfmodem"
CLASS=0403
PCIDEV=1002:4383
SUBSYS=1849:0397
IRQ=41
IDENT=HCF.HSF

For candidate modem in:  00:14.2
   0403 Audio device: ATI Technologies Inc SBx00 Azalia 
      Primary device ID:  1002:4383
Support type needed or chipset: HCF.HSF



For owners of a Dell PCs with Conexant HSF modems, a driver source
package with full speed enabled is available, but requires driver
compiling. Read DOCs/Conexant.txt

1002:4383 could be either a HSF or HCF Conexant modem, because of
ambiguous
use of the PCI ID by modem assemblers. First try the hcfpcimodem
package.
If the installation aborts, then use the hsfmodem package. Read
DOCs/Conexant.txt
for details and Modem/DOCs/YourSystem.txt for follow through guidance.


Modem support packages from Linuxant include resources for compiling
drivers.  
If an installer package matching your kernel_version  is not provided,
just install a generic code package.

>From  http://www.linuxant.com/drivers/hsf/full/downloads-ubuntu-x86.php
download hsfmodem-7.80.02.05full_k2.6.38_11_generic_ubuntu_i386.deb.zip 
Under Linux unpack with:
$ unzip hsfmodem*.zip
Then install with:
$ sudo dpkg -i hsfmodem*.deb
Subsequently, the modem should be found with
$ sudo wvdialconf /etc/wvdial.conf
Edit in your personal information with:
$ sudo gedit /etc/wvdial.conf
and try dialing out with:
$ sudo wvdial.
See DOCs/Testing.txt  for details.

The directions following below need only be pursued, if the above
procedures are not adequate.

Start at http://www.linuxant.com/drivers/hsf/downloads-license.php to
find the
hsfmodem package matching your System. For several Linux distros, there
are
precompiled drivers matched to specific kernels. These have within the
FileName,
your KernelVersion: 2.6.38_11_generic
They can be found through
http://www.linuxant.com/drivers/hsf/full/downloads.php 
A more precise location may be given a few paragraphs below.
If an EXACT Match with your your KernelVersion is not found, one of the 
"Generic packages with source" near the bottom of the page must be used.
Downloaded packages must be moved into the Linux partition (home folder
is OK)
and unzipped with:
unzip hsf*.zip
The installation command for a .deb suffic packages is, with root/adm
permission:
  sudo dpkg -i hsf*.deb
while for .rpm suffix it is, with:
  rpm -i hsf*.rpm
Read DOCs/Conexant.txt

Writing DOCs/Conexant.txt



Predictive  diagnostics for card in bus 02:07.0:
Modem chipset  detected on
NAME="Communication controller: Conexant Systems, Inc. HCF 56k Modem "
CLASS=0780
PCIDEV=14f1:1025
SUBSYS=14f1:1025
IRQ=11
HDA2=00:14.2
IDENT=HCF.HSF

For candidate modem in:  02:07.0
   0780 Communication controller: Conexant Systems, Inc. HCF 56k Modem 
      Primary device ID:  14f1:1025
Support type needed or chipset: HCF.HSF



For owners of a Dell PCs with Conexant HSF modems, a driver source
package with full speed enabled is available, but requires driver
compiling. Read DOCs/Conexant.txt

14f1:1025 could be either a HSF or HCF Conexant modem, because of
ambiguous
use of the PCI ID by modem assemblers. First try the hcfpcimodem
package.
If the installation aborts, then use the hsfmodem package. Read
DOCs/Conexant.txt
for details and Modem/DOCs/YourSystem.txt for follow through guidance.


Modem support packages from Linuxant include resources for compiling
drivers.  
If an installer package matching your kernel_version  is not provided,
just install a generic code package.

>From  http://www.linuxant.com/drivers/hsf/full/downloads-ubuntu-x86.php
download hsfmodem-7.80.02.05full_k2.6.38_11_generic_ubuntu_i386.deb.zip 
Under Linux unpack with:
$ unzip hsfmodem*.zip
Then install with:
$ sudo dpkg -i hsfmodem*.deb
Subsequently, the modem should be found with
$ sudo wvdialconf /etc/wvdial.conf
Edit in your personal information with:
$ sudo gedit /etc/wvdial.conf
and try dialing out with:
$ sudo wvdial.
See DOCs/Testing.txt  for details.

The directions following below need only be pursued, if the above
procedures are not adequate.

Start at http://www.linuxant.com/drivers/hsf/downloads-license.php to
find the
hsfmodem package matching your System. For several Linux distros, there
are
precompiled drivers matched to specific kernels. These have within the
FileName,
your KernelVersion: 2.6.38_11_generic
They can be found through
http://www.linuxant.com/drivers/hsf/full/downloads.php 
A more precise location may be given a few paragraphs below.
If an EXACT Match with your your KernelVersion is not found, one of the 
"Generic packages with source" near the bottom of the page must be used.
Downloaded packages must be moved into the Linux partition (home folder
is OK)
and unzipped with:
unzip hsf*.zip
The installation command for a .deb suffic packages is, with root/adm
permission:
  sudo dpkg -i hsf*.deb
while for .rpm suffix it is, with:
  rpm -i hsf*.rpm
Read DOCs/Conexant.txt

Writing DOCs/Conexant.txt


Completed candidate modem analyses.

The base of the UDEV device file system is: /dev/.udev

Versions adequately match for the compiler installed: 4.5.2
             and the compiler used in kernel assembly: 4.5.2



Minimal compiling resources appear complete:
   make utility - /usr/bin/make
   Compiler version 4.5
   linuc_headers base folder /lib/modules/2.6.38-11-generic/build

However some compilations and executable functions may need additional
files,
in the FileNames.h (so called kernel "h"eaders) collection installed
in  /usr/include/ .
For martian_modem, additional required packages are needed. The also
required headers of package libc6 are commonly installed by default. 
Compiling hsfmodem drivers does require linux-libc-dev and libc6-dev
packages, for kernels 2.6.24 and later versions.
In not included on your install CD, search for them at
http://packages.ubuntu.com
or comparable Repository for other Linux distros.
When compiling ALSA drivers, the utility "patch" will also be needed.


Compressed files at: /usr/src/qc-usb.tar.bz2


If a driver compilation fails, with message including some lack of some
FileName.h (stdio.h for example), then
Some additional kernel-header files need installation to /usr/include.
The minimal additional packages are libc6-dev
and any of its dependents, under Ubuntu linux-libc-dev

If an alternate ethernet connection is available,
$  apt-get update
$  apt-get -s install linux-kernel-devel
will install needed packages.
For Debian/Ubuntu related distributions, run the following command to
display the needed package list:

Otherwise packages have to be found through http://packages.ubuntu.com
Once downloaded and transferred into a Linux partition,
they can be installed alltogether with:
$ sudo dpkg -i *.deb


Checking pppd properties:
-rwsr-xr-- 1 root dip 325744 2011-02-04 15:42 /usr/sbin/pppd

In case of an "error 17" "serial loopback" problem, see:

http://linmodems.technion.ac.il/linmodems/archive-sixth/msg02637.html

To enable dialout without Root permission do:
$ su - root  (not for Ubuntu)
        sudo chmod a+x /usr/sbin/pppd
or under Ubuntu related Linuxes
sudo chmod a+x /usr/sbin/pppd

Checking settings of: /etc/ppp/options
asyncmap 0
noauth
crtscts
lock
hide-password
modem
lcp-echo-interval 30
lcp-echo-failure 4
noipx

In case of a message like:
   Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html

For guidance on FAX usage, get from
http://linmodems.technion.ac.il/packages/  get faxing.tar.gz
It has samples for a modem using port /dev/ttySL0, which must be changed
to match your modem's port.

Read Modem/DOCs/YourSystem.txt concerning other COMM channels: eth1
Which can interfere with Browser naviagation.

Don't worry about the following, it is for experts should trouble
shooting be necessary.
==========================================================

Checking for modem support lines:
--------------------------------------
     /device/modem symbolic link:   
slmodemd created symbolic link /dev/ttySL0:  
     Within /etc/udev/ files:
/etc/udev/rules.d/15-huawei-155x.rules:RUN+="/lib/udev/modem-modeswitch
--vendor 0x$attr{idVendor} --product 0x$attr{idProduct} --type
option-zerocd"
     Within /etc/modprobe.conf files:
/etc/modprobe.d/alsa-base.conf:options snd-atiixp-modem index=-2
/etc/modprobe.d/alsa-base.conf:options snd-via82xx-modem index=-2
/etc/modprobe.d/sl-modem.conf:install slamr /sbin/modprobe -qb
ungrab-winmodem; /sbin/modprobe --ignore-install slamr; test
-e /dev/slamr0 && (chmod 660 /dev/slamr0 && chgrp dialout /dev/slamr0)
|| (/bin/mknod -m 660 /dev/slamr0 c 242 0 2>/dev/null && chgrp
dialout /dev/slamr0)
/etc/modprobe.d/sl-modem.conf:install slusb /sbin/modprobe -qb
ungrab-winmodem; /sbin/modprobe --ignore-install slusb; test
-e /dev/slusb0 && (chmod 660 /dev/slusb0 && chgrp dialout /dev/slusb0)
|| (/bin/mknod -m 660 /dev/slusb0 c 243 0 2>/dev/null && chgrp
dialout /dev/slusb0)
/etc/modprobe.d/blacklist-modem.conf:# Uncomment these entries in order
to blacklist unwanted modem drivers
/etc/modprobe.d/blacklist-modem.conf:# blacklist snd-atiixp-modem
/etc/modprobe.d/blacklist-modem.conf:# blacklist snd-via82xx-modem
     Within any ancient /etc/devfs files:

     Within ancient kernel 2.4.n /etc/module.conf files:

--------- end modem support lines --------





[Index of Archives]     [Linux Media Development]     [Asterisk]     [DCCP]     [Netdev]     [X.org]     [Xfree86]     [Fedora Women]     [Linux USB]

  Powered by Linux