Re: ModemData.txt dmsg.txt output after scanMode

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Jesus,

Something is causing the driver to not work correctly, i.e, a
conflict.  Novuevau and modem hcfpcimodem are sharing resources and
this is causing the modem to fail :(

>  Modem interrupt assignment and sharing:
>  16:          4   IO-APIC-fasteoi   nouveau, hcfpcihw

[  924.781371] hcfpcihw 0000:00:0c.0: PCI INT A disabled
[  960.815473] hcfpcihw 0000:00:0c.0: PCI INT A -> GSI 16 (level, low)
-> IRQ 16
[  961.595176] ttySHCF0 at I/O 0xc000 (irq = 16) is a Conexant HCF
controllerless PCI modem (PCI-14f1:1033-1092:0ac8)
[  961.851799] hcfpcihw 0000:00:0c.0: PCI INT A disabled
[  963.182548] hcfpcihw 0000:00:0c.0: PCI INT A -> GSI 16 (level, low)
-> IRQ 16
[  963.882184] ttySHCF0 at I/O 0xc000 (irq = 16) is a Conexant HCF
controllerless PCI modem (PCI-14f1:1033-1092:0ac8)
[  984.612035] No probe response from AP 00:80:5a:28:6e:0e after 500ms,
disconnecting.

Hopefully Jonathan (Linuxant support) has some suggestions you can try out.

Regards,

Antonio

On Fri, Nov 26, 2010 at 4:24 AM, jvg <macjvg@xxxxxxxxx> wrote:
> Greetings to everyone.
> It follows scanMode output after following instructions on installing
> modem-fax pci software on Ubuntu 10.10. It doesn't work neither
> Any help will be appreciated.
> Regards,
>
> Jesús
>
> ModemData.txt------------------------------------
>
>  Only plain text email is forwarded by the  Discuss@xxxxxxxxxxxxx List
> Server,
>  as HTML can contain viruses. Use as the email Subject Line:
>           YourName, YourCountry  kernel 2.6.35-22-generic
>  With this Subject Line cogent experts will be alerted, and useful case
> names left in the Archive.
>  YourCountry will enable Country specific guidance. Linux experts in
> YourCountry
>  can be found through: http://www.linux.org/groups/index.html.
> They will know your Country's modem code, which may be essential for
> dialup service.
> Responses from Discuss@xxxxxxxxxxxxx are sometimes blocked by an
> Internet Provider mail filters.
>  So in a day, also check the Archived responses at
> http://www.linmodems.org
> --------------------------  System information
> ----------------------------
> CPU=i686,  Ubuntu ,  ALSA_version=1.0.23
> Linux version 2.6.35-22-generic (buildd@vernadsky) (gcc version 4.4.5
> (Ubuntu/Linaro 4.4.4-14ubuntu5) ) #35-Ubuntu SMP Sat Oct 16 20:36:48 UTC
> 2010
>  scanModem update of:  2010_05_29
> The modem symbolic link is /dev/modem -> ttySHCF0
> Distrib_ID=Ubuntu
> DistribCodeName=maverick
> AptRepositoryStem=http://es.archive.ubuntu.com/ubuntu/
>
>
> The dkms driver upgrade utilities are installed,
>
>  There are no blacklisted modem drivers in /etc/modprobe*  files
>
>  Potentially useful modem drivers now loaded are:
>          slamr
>
> slamrTest=
> Attached USB devices are:
>  ID 06bd:2091 AGFA-Gevaert NV SnapScan e20
>  ID ffc0:0001
>  ID 0783:0006 C3PO LTC31v2
>  ID 047f:0ca1 Plantronics, Inc. USB DSP v4 Audio Interface
>  ID 058f:6362 Alcor Micro Corp. Flash Card Reader/Writer
>  ID 0bda:8189 Realtek Semiconductor Corp. RTL8187B Wireless 802.11g
> 54Mbps Network Adapter
> If a cellphone is not detected, see
> http://ubuntuforums.org/archive/index.php/t-878554.html
> A sample report is:
> http://linmodems.technion.ac.il/bigarch/archive-nineth/msg00578.html
>
> If a USB modem or cellphone is attached and was not detected, please
> provide available information in your request to discuss@xxxxxxxxxxxxx
>
> Candidate PCI devices with modem chips are:
> 00:0c.0 Communication controller: Conexant Systems, Inc. HCF 56k
> Data/Fax Modem (rev 08)
> High Definition Audio cards can host modem chips.
>
> For candidate card in slot 00:0c.0, firmware information and bootup
> diagnostics are:
>  PCI slot       PCI ID          SubsystemID     Name
>  ----------     ---------       ---------       --------------
>  00:0c.0        14f1:1033       1092:0ac8       Communication controller: Conexant Systems,
> Inc. HCF 56k Data/Fax Modem
>
>  Modem interrupt assignment and sharing:
>  16:          4   IO-APIC-fasteoi   nouveau, hcfpcihw
>  --- Bootup diagnostics for card in PCI slot 00:0c.0 ----
> [    0.115157] pci 0000:00:0c.0: reg 10: [mem 0xfebe0000-0xfebeffff]
> [    0.115169] pci 0000:00:0c.0: reg 14: [io  0xc000-0xc007]
> [    0.115227] pci 0000:00:0c.0: PME# supported from D0 D3hot D3cold
> [    0.115235] pci 0000:00:0c.0: PME# disabled
> [  499.897864] hcfpcihw 0000:00:0c.0: PCI INT A -> GSI 16 (level, low)
> -> IRQ 16
> [  501.765444] hcfpcihw 0000:00:0c.0: PCI INT A disabled
> [  503.018257] hcfpcihw 0000:00:0c.0: PCI INT A -> GSI 16 (level, low)
> -> IRQ 16
> [  505.215408] hcfpcihw 0000:00:0c.0: PCI INT A disabled
> [  506.805357] hcfpcihw 0000:00:0c.0: PCI INT A -> GSI 16 (level, low)
> -> IRQ 16
> [  924.781371] hcfpcihw 0000:00:0c.0: PCI INT A disabled
> [  960.815473] hcfpcihw 0000:00:0c.0: PCI INT A -> GSI 16 (level, low)
> -> IRQ 16
> [  961.851799] hcfpcihw 0000:00:0c.0: PCI INT A disabled
> [  963.182548] hcfpcihw 0000:00:0c.0: PCI INT A -> GSI 16 (level, low)
> -> IRQ 16
> [ 2303.485359] hcfpcihw 0000:00:0c.0: PCI INT A disabled
> [ 2303.721466] hcfpcihw 0000:00:0c.0: PCI INT A -> GSI 16 (level, low)
> -> IRQ 16
> [ 3607.929090] hcfpcihw 0000:00:0c.0: PCI INT A disabled
> [ 3646.336789] hcfpcihw 0000:00:0c.0: PCI INT A -> GSI 16 (level, low)
> -> IRQ 16
> [ 3984.717732] hcfpcihw 0000:00:0c.0: PCI INT A disabled
> [ 4021.495374] hcfpcihw 0000:00:0c.0: PCI INT A -> GSI 16 (level, low)
> -> IRQ 16
> [ 4022.446913] hcfpcihw 0000:00:0c.0: PCI INT A disabled
> [ 4023.825258] hcfpcihw 0000:00:0c.0: PCI INT A -> GSI 16 (level, low)
> -> IRQ 16
>
>  The PCI slot 00:0c.0 of the modem card may be disabled early in
>  a bootup process,  but then enabled later. If modem drivers load
>  but the  modem is not responsive, read DOCs/Bootup.txt about possible
> fixes.
>  Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx
>  if help is needed.
>
>
> === Finished firmware and bootup diagnostics, next deducing cogent
> software. ===
>
> Predictive  diagnostics for card in bus 00:0c.0:
>        Modem chipset not detected on
> NAME="Communication controller: Conexant Systems, Inc. HCF 56k Data/Fax
> Modem "
> CLASS=0780
> PCIDEV=14f1:1033
> SUBSYS=1092:0ac8
> IRQ=16
> IDENT=hcfpcimodem
>
>  For candidate modem in:  00:0c.0
>
>      Primary device ID:
>  Support type needed or chipset:
>
>
>  Completed candidate modem analyses.
>
>  The base of the UDEV device file system is: /dev/.udev
>
>  Versions adequately match for the compiler installed: 4.4.5
>             and the compiler used in kernel assembly: 4.4.5
>
>  linux-headers-2.6.35-22-generic resources needed for compiling are not
> manifestly ready!
>
>  If compiling is necessary packages must be installed, providing:
>         linux-headers-2.6.35-22-generic
>
>
> If a driver compilation fails, with message including some lack of some
> FileName.h (stdio.h for example), then
> Some additional kernel-header files need installation to /usr/include.
> The minimal additional packages are libc6-dev
> and any of its dependents, under Ubuntu linux-libc-dev
>
> If an alternate ethernet connection is available,
> $  apt-get update
> $  apt-get -s install linux-kernel-devel
> will install needed packages.
> For Debian/Ubuntu related distributions, run the following command to
> display the needed package list:
>
> Otherwise packages have to be found through http://packages.ubuntu.com
> Once downloaded and transferred into a Linux partition,
> they can be installed alltogether with:
> $ sudo dpkg -i *.deb
>
> Checking settings of:   /etc/ppp/options
> asyncmap 0
> noauth
> crtscts
> lock
> hide-password
> modem
> proxyarp
> lcp-echo-interval 30
> lcp-echo-failure 4
> noipx
>
> In case of a message like:
>   Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
> see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html
>
> For guidance on FAX usage, get from
> http://linmodems.technion.ac.il/packages/  get faxing.tar.gz
> It has samples for a modem using port /dev/ttySL0, which must be changed
> to match your modem's port.
>
> Read Modem/DOCs/YourSystem.txt concerning other COMM channels: eth0 eth1
> wlan0 wlan3
> Which can interfere with Browser naviagation.
>
>  Don't worry about the following, it is for experts should trouble
> shooting be necessary.
> ==========================================================
>
>  Checking for modem support lines:
>  --------------------------------------
>     /device/modem symbolic link:   lrwxrwxrwx 1 root root 8 2010-11-26
> 10:06 /dev/modem -> ttySHCF0
> slmodemd created symbolic link /dev/ttySL0:
>     Within /etc/udev/ files:
> /etc/udev/rules.d/00-hcfpci.rules:KERNEL=="ttySHCF0", SYMLINK="modem"
>     Within /etc/modprobe.conf files:
> /etc/modprobe.d/sl-modem.conf:install slamr /sbin/modprobe -qb
> ungrab-winmodem; /sbin/modprobe --ignore-install slamr; test
> -e /dev/slamr0 && (chmod 660 /dev/slamr0 && chgrp dialout /dev/slamr0)
> || (/bin/mknod -m 660 /dev/slamr0 c 242 0 2>/dev/null && chgrp
> dialout /dev/slamr0)
> /etc/modprobe.d/sl-modem.conf:install slusb /sbin/modprobe -qb
> ungrab-winmodem; /sbin/modprobe --ignore-install slusb; test
> -e /dev/slusb0 && (chmod 660 /dev/slusb0 && chgrp dialout /dev/slusb0)
> || (/bin/mknod -m 660 /dev/slusb0 c 243 0 2>/dev/null && chgrp
> dialout /dev/slusb0)
> /etc/modprobe.d/alsa-base.conf:options snd-atiixp-modem index=-2
> /etc/modprobe.d/alsa-base.conf:options snd-via82xx-modem index=-2
> /etc/modprobe.d/hcfpci.conf:alias /dev/modem /dev/ttySHCF
> /etc/modprobe.d/blacklist-modem.conf:# Uncomment these entries in order
> to blacklist unwanted modem drivers
> /etc/modprobe.d/blacklist-modem.conf:# blacklist snd-atiixp-modem
> /etc/modprobe.d/blacklist-modem.conf:# blacklist snd-via82xx-modem
>     Within any ancient /etc/devfs files:
>     Within ancient kernel 2.4.n /etc/module.conf files:
> /etc/modules.conf:alias /dev/modem /dev/ttySHCF
> --------- end modem support lines --------
>
> -------------------------------------------------------dmsg.txt--------------------------
>           CPU0
>  0:         48   IO-APIC-edge      timer
>  1:       5771   IO-APIC-edge      i8042
>  6:          3   IO-APIC-edge      floppy
>  7:          0   IO-APIC-edge      parport0
>  8:          0   IO-APIC-edge      rtc0
>  9:          0   IO-APIC-fasteoi   acpi
>  14:          0   IO-APIC-edge      pata_via
>  15:        356   IO-APIC-edge      pata_via
>  16:          4   IO-APIC-fasteoi   nouveau, hcfpcihw
>  17:          0   IO-APIC-fasteoi   eth1
>  18:         69   IO-APIC-fasteoi   Ensoniq AudioPCI
>  19:      58862   IO-APIC-fasteoi   b43
>  20:      34590   IO-APIC-fasteoi   sata_via
>  21:     577982   IO-APIC-fasteoi   ehci_hcd:usb1, uhci_hcd:usb2,
> uhci_hcd:usb3, uhci_hcd:usb4, uhci_hcd:usb5
>  23:          0   IO-APIC-fasteoi   eth0
> NMI:          0   Non-maskable interrupts
> LOC:    1877035   Local timer interrupts
> SPU:          0   Spurious interrupts
> PMI:          0   Performance monitoring interrupts
> PND:          0   Performance pending work
> RES:          0   Rescheduling interrupts
> CAL:          0   Function call interrupts
> TLB:          0   TLB shootdowns
> TRM:          0   Thermal event interrupts
> THR:          0   Threshold APIC interrupts
> MCE:          0   Machine check exceptions
> MCP:         17   Machine check polls
> ERR:          0
> MIS:          0
>
> [    0.000000] Initializing cgroup subsys cpuset
> [    0.000000] Initializing cgroup subsys cpu
> [    0.000000] Linux version 2.6.35-22-generic (buildd@vernadsky) (gcc
> version 4.4.5 (Ubuntu/Linaro 4.4.4-14ubuntu5) ) #35-Ubuntu SMP Sat Oct
> 16 20:36:48 UTC 2010 (Ubuntu 2.6.35-22.35-generic 2.6.35.4)
> [    0.000000] BIOS-provided physical RAM map:
> [    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> [    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000
> (reserved)
> [    0.000000]  BIOS-e820: 00000000000e4000 - 0000000000100000
> (reserved)
> [    0.000000]  BIOS-e820: 0000000000100000 - 000000007ff30000 (usable)
> [    0.000000]  BIOS-e820: 000000007ff30000 - 000000007ff40000 (ACPI
> data)
> [    0.000000]  BIOS-e820: 000000007ff40000 - 000000007fff0000 (ACPI
> NVS)
> [    0.000000]  BIOS-e820: 000000007fff0000 - 0000000080000000
> (reserved)
> [    0.000000]  BIOS-e820: 00000000fffc0000 - 0000000100000000
> (reserved)
> [    0.000000] NX (Execute Disable) protection: approximated by x86
> segment limits
> [    0.000000] DMI 2.3 present.
> [    0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working
> around it.
> [    0.000000] e820 update range: 0000000000000000 - 0000000000010000
> (usable) ==> (reserved)
> [    0.000000] e820 update range: 0000000000000000 - 0000000000001000
> (usable) ==> (reserved)
> [    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000
> (usable)
> [    0.000000] last_pfn = 0x7ff30 max_arch_pfn = 0x100000
> [    0.000000] MTRR default type: uncachable
> [    0.000000] MTRR fixed ranges enabled:
> [    0.000000]   00000-9FFFF write-back
> [    0.000000]   A0000-DFFFF uncachable
> [    0.000000]   E0000-EFFFF write-through
> [    0.000000]   F0000-FFFFF write-protect
> [    0.000000] MTRR variable ranges enabled:
> [    0.000000]   0 base 000000000 mask F80000000 write-back
> [    0.000000]   1 disabled
> [    0.000000]   2 disabled
> [    0.000000]   3 disabled
> [    0.000000]   4 disabled
> [    0.000000]   5 disabled
> [    0.000000]   6 disabled
> [    0.000000]   7 disabled
> [    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new
> 0x7010600070106
> [    0.000000] Scanning 0 areas for low memory corruption
> [    0.000000] modified physical RAM map:
> [    0.000000]  modified: 0000000000000000 - 0000000000010000 (reserved)
> [    0.000000]  modified: 0000000000010000 - 000000000009fc00 (usable)
> [    0.000000]  modified: 000000000009fc00 - 00000000000a0000 (reserved)
> [    0.000000]  modified: 00000000000e4000 - 0000000000100000 (reserved)
> [    0.000000]  modified: 0000000000100000 - 000000007ff30000 (usable)
> [    0.000000]  modified: 000000007ff30000 - 000000007ff40000 (ACPI
> data)
> [    0.000000]  modified: 000000007ff40000 - 000000007fff0000 (ACPI NVS)
> [    0.000000]  modified: 000000007fff0000 - 0000000080000000 (reserved)
> [    0.000000]  modified: 00000000fffc0000 - 0000000100000000 (reserved)
> [    0.000000] initial memory mapped : 0 - 00c00000
> [    0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
> [    0.000000]  0000000000 - 0000400000 page 4k
> [    0.000000]  0000400000 - 0037400000 page 2M
> [    0.000000]  0037400000 - 00377fe000 page 4k
> [    0.000000] kernel direct mapping tables up to 377fe000 @ 15000-1a000
> [    0.000000] RAMDISK: 375ac000 - 37ff0000
> [    0.000000] Allocated new RAMDISK: 009a5000 - 013e86b5
> [    0.000000] Move RAMDISK from 00000000375ac000 - 0000000037fef6b4 to
> 009a5000 - 013e86b4
> [    0.000000] ACPI: RSDP 000f9bc0 00014 (v00 ACPIAM)
> [    0.000000] ACPI: RSDT 7ff30000 00030 (v01 A M I  OEMRSDT  10000428
> MSFT 00000097)
> [    0.000000] ACPI: FACP 7ff30200 00081 (v02 A M I  OEMFACP  10000428
> MSFT 00000097)
> [    0.000000] ACPI: DSDT 7ff30360 0342A (v01  P4V88 P4V88001 00000001
> INTL 02002026)
> [    0.000000] ACPI: FACS 7ff40000 00040
> [    0.000000] ACPI: APIC 7ff30300 00052 (v01 A M I  OEMAPIC  10000428
> MSFT 00000097)
> [    0.000000] ACPI: OEMB 7ff40040 0003F (v01 A M I  OEMBIOS  10000428
> MSFT 00000097)
> [    0.000000] ACPI: Local APIC address 0xfee00000
> [    0.000000] 1159MB HIGHMEM available.
> [    0.000000] 887MB LOWMEM available.
> [    0.000000]   mapped low ram: 0 - 377fe000
> [    0.000000]   low ram: 0 - 377fe000
> [    0.000000] Zone PFN ranges:
> [    0.000000]   DMA      0x00000010 -> 0x00001000
> [    0.000000]   Normal   0x00001000 -> 0x000377fe
> [    0.000000]   HighMem  0x000377fe -> 0x0007ff30
> [    0.000000] Movable zone start PFN for each node
> [    0.000000] early_node_map[2] active PFN ranges
> [    0.000000]     0: 0x00000010 -> 0x0000009f
> [    0.000000]     0: 0x00000100 -> 0x0007ff30
> [    0.000000] On node 0 totalpages: 523967
> [    0.000000] free_area_init_node: node 0, pgdat c07ffd40, node_mem_map
> c13ea200
> [    0.000000]   DMA zone: 32 pages used for memmap
> [    0.000000]   DMA zone: 0 pages reserved
> [    0.000000]   DMA zone: 3951 pages, LIFO batch:0
> [    0.000000]   Normal zone: 1744 pages used for memmap
> [    0.000000]   Normal zone: 221486 pages, LIFO batch:31
> [    0.000000]   HighMem zone: 2319 pages used for memmap
> [    0.000000]   HighMem zone: 294435 pages, LIFO batch:31
> [    0.000000] Using APIC driver default
> [    0.000000] ACPI: PM-Timer IO Port: 0x808
> [    0.000000] ACPI: Local APIC address 0xfee00000
> [    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
> [    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled)
> [    0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
> [    0.000000] IOAPIC[0]: apic_id 1, version 3, address 0xfec00000, GSI
> 0-23
> [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
> [    0.000000] ACPI: IRQ0 used by override.
> [    0.000000] ACPI: IRQ2 used by override.
> [    0.000000] ACPI: IRQ9 used by override.
> [    0.000000] Using ACPI (MADT) for SMP configuration information
> [    0.000000] SMP: Allowing 2 CPUs, 1 hotplug CPUs
> [    0.000000] nr_irqs_gsi: 40
> [    0.000000] PM: Registered nosave memory: 000000000009f000 -
> 00000000000a0000
> [    0.000000] PM: Registered nosave memory: 00000000000a0000 -
> 00000000000e4000
> [    0.000000] PM: Registered nosave memory: 00000000000e4000 -
> 0000000000100000
> [    0.000000] Allocating PCI resources starting at 80000000 (gap:
> 80000000:7ffc0000)
> [    0.000000] Booting paravirtualized kernel on bare hardware
> [    0.000000] early_res array is doubled to 64 at [16000 - 167ff]
> [    0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2
> nr_node_ids:1
> [    0.000000] PERCPU: Embedded 14 pages/cpu @c2400000 s36416 r0 d20928
> u2097152
> [    0.000000] pcpu-alloc: s36416 r0 d20928 u2097152 alloc=1*4194304
> [    0.000000] pcpu-alloc: [0] 0 1
> [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.
> Total pages: 519872
> [    0.000000] Kernel command line:
> BOOT_IMAGE=/boot/vmlinuz-2.6.35-22-generic
> root=UUID=901d9326-5b10-42f2-86b8-8bfb0192bba4 ro quiet splash
> [    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
> [    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288
> bytes)
> [    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144
> bytes)
> [    0.000000] Enabling fast FPU save and restore... done.
> [    0.000000] Enabling unmasked SIMD FPU exception support... done.
> [    0.000000] Initializing CPU#0
> [    0.000000] allocated 10481280 bytes of page_cgroup
> [    0.000000] please try 'cgroup_disable=memory' option if you don't
> want memory cgroups
> [    0.000000] Subtract (42 early reservations)
> [    0.000000]   #1 [0000001000 - 0000002000]   EX TRAMPOLINE
> [    0.000000]   #2 [0000100000 - 00009a0adc]   TEXT DATA BSS
> [    0.000000]   #3 [000009d800 - 0000100000]   BIOS reserved
> [    0.000000]   #4 [00009a1000 - 00009a408d]             BRK
> [    0.000000]   #5 [0000010000 - 0000011000]      TRAMPOLINE
> [    0.000000]   #6 [0000011000 - 0000015000]     ACPI WAKEUP
> [    0.000000]   #7 [0000015000 - 0000016000]         PGTABLE
> [    0.000000]   #8 [00009a5000 - 00013e9000]     NEW RAMDISK
> [    0.000000]   #9 [00013e9000 - 00013ea000]         BOOTMEM
> [    0.000000]   #10 [00013ea000 - 00023ea000]         BOOTMEM
> [    0.000000]   #11 [00023ea000 - 00023ea004]         BOOTMEM
> [    0.000000]   #12 [00023ea040 - 00023ea100]         BOOTMEM
> [    0.000000]   #13 [00023ea100 - 00023ea154]         BOOTMEM
> [    0.000000]   #14 [00023ea180 - 00023ed180]         BOOTMEM
> [    0.000000]   #15 [00023ed180 - 00023ed1f0]         BOOTMEM
> [    0.000000]   #16 [00023ed200 - 00023f3200]         BOOTMEM
> [    0.000000]   #17 [00023f3200 - 00023f3227]         BOOTMEM
> [    0.000000]   #18 [00023f3240 - 00023f333c]         BOOTMEM
> [    0.000000]   #19 [00023f3340 - 00023f3380]         BOOTMEM
> [    0.000000]   #20 [00023f3380 - 00023f33c0]         BOOTMEM
> [    0.000000]   #21 [00023f33c0 - 00023f3400]         BOOTMEM
> [    0.000000]   #22 [00023f3400 - 00023f3440]         BOOTMEM
> [    0.000000]   #23 [00023f3440 - 00023f3480]         BOOTMEM
> [    0.000000]   #24 [00023f3480 - 00023f34c0]         BOOTMEM
> [    0.000000]   #25 [00023f34c0 - 00023f3500]         BOOTMEM
> [    0.000000]   #26 [00023f3500 - 00023f3540]         BOOTMEM
> [    0.000000]   #27 [00023f3540 - 00023f3550]         BOOTMEM
> [    0.000000]   #28 [00023f3580 - 00023f35ea]         BOOTMEM
> [    0.000000]   #29 [00023f3600 - 00023f366a]         BOOTMEM
> [    0.000000]   #30 [0002400000 - 000240e000]         BOOTMEM
> [    0.000000]   #31 [0002600000 - 000260e000]         BOOTMEM
> [    0.000000]   #32 [00023f5680 - 00023f5684]         BOOTMEM
> [    0.000000]   #33 [00023f56c0 - 00023f56c4]         BOOTMEM
> [    0.000000]   #34 [00023f5700 - 00023f5708]         BOOTMEM
> [    0.000000]   #35 [00023f5740 - 00023f5748]         BOOTMEM
> [    0.000000]   #36 [00023f5780 - 00023f5828]         BOOTMEM
> [    0.000000]   #37 [00023f5840 - 00023f58a8]         BOOTMEM
> [    0.000000]   #38 [00023f58c0 - 00023f98c0]         BOOTMEM
> [    0.000000]   #39 [000240e000 - 000248e000]         BOOTMEM
> [    0.000000]   #40 [000248e000 - 00024ce000]         BOOTMEM
> [    0.000000]   #41 [000260e000 - 000300ce80]         BOOTMEM
> [    0.000000] Initializing HighMem for node 0 (000377fe:0007ff30)
> [    0.000000] Memory: 2048908k/2096320k available (4928k kernel code,
> 46960k reserved, 2336k data, 684k init, 1187016k highmem)
> [    0.000000] virtual kernel memory layout:
> [    0.000000]     fixmap  : 0xfff16000 - 0xfffff000   ( 932 kB)
> [    0.000000]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
> [    0.000000]     vmalloc : 0xf7ffe000 - 0xff7fe000   ( 120 MB)
> [    0.000000]     lowmem  : 0xc0000000 - 0xf77fe000   ( 887 MB)
> [    0.000000]       .init : 0xc0819000 - 0xc08c4000   ( 684 kB)
> [    0.000000]       .data : 0xc05d030e - 0xc0818668   (2336 kB)
> [    0.000000]       .text : 0xc0100000 - 0xc05d030e   (4928 kB)
> [    0.000000] Checking if this processor honours the WP bit even in
> supervisor mode...Ok.
> [    0.000000] SLUB: Genslabs=13, HWalign=128, Order=0-3, MinObjects=0,
> CPUs=2, Nodes=1
> [    0.000000] Hierarchical RCU implementation.
> [    0.000000]  RCU dyntick-idle grace-period acceleration is enabled.
> [    0.000000]  RCU-based detection of stalled CPUs is disabled.
> [    0.000000]  Verbose stalled-CPUs detection is disabled.
> [    0.000000] NR_IRQS:2304 nr_irqs:512
> [    0.000000] Console: colour VGA+ 80x25
> [    0.000000] console [tty0] enabled
> [    0.000000] Fast TSC calibration using PIT
> [    0.000000] Detected 1695.223 MHz processor.
> [    0.004009] Calibrating delay loop (skipped), value calculated using
> timer frequency.. 3390.44 BogoMIPS (lpj=6780892)
> [    0.004020] pid_max: default: 32768 minimum: 301
> [    0.004061] Security Framework initialized
> [    0.004102] AppArmor: AppArmor initialized
> [    0.004107] Yama: becoming mindful.
> [    0.004224] Mount-cache hash table entries: 512
> [    0.004517] Initializing cgroup subsys ns
> [    0.004527] Initializing cgroup subsys cpuacct
> [    0.004537] Initializing cgroup subsys memory
> [    0.004558] Initializing cgroup subsys devices
> [    0.004563] Initializing cgroup subsys freezer
> [    0.004569] Initializing cgroup subsys net_cls
> [    0.004626] CPU0: Hyper-Threading is disabled
> [    0.004633] mce: CPU supports 4 MCE banks
> [    0.004653] CPU0: Thermal monitoring enabled (TM1)
> [    0.004672] Performance Events: Netburst events, Netburst P4/Xeon PMU
> driver.
> [    0.004694] ... version:                0
> [    0.004699] ... bit width:              40
> [    0.004703] ... generic registers:      18
> [    0.004708] ... value mask:             000000ffffffffff
> [    0.004713] ... max period:             0000007fffffffff
> [    0.004718] ... fixed-purpose events:   0
> [    0.004722] ... event mask:             000000000003ffff
> [    0.009077] SMP alternatives: switching to UP code
> [    0.028085] ACPI: Core revision 20100428
> [    0.037427] ftrace: converting mcount calls to 0f 1f 44 00 00
> [    0.037438] ftrace: allocating 21758 entries in 43 pages
> [    0.040147] Enabling APIC mode:  Flat.  Using 1 I/O APICs
> [    0.041291] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
> [    0.083717] CPU0: Intel(R) Pentium(R) 4 CPU 1.70GHz stepping 02
> [    0.084000] Brought up 1 CPUs
> [    0.084000] Total of 1 processors activated (3390.44 BogoMIPS).
> [    0.084000] devtmpfs: initialized
> [    0.084039] regulator: core version 0.5
> [    0.084097] Time:  8:59:29  Date: 11/26/10
> [    0.084194] NET: Registered protocol family 16
> [    0.084450] EISA bus registered
> [    0.084474] ACPI: bus type pci registered
> [    0.084685] PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=1
> [    0.084691] PCI: Using configuration type 1 for base access
> [    0.086778] bio: create slab <bio-0> at 0
> [    0.088355] ACPI: EC: Look up EC in DSDT
> [    0.090682] ACPI: Executed 1 blocks of module-level executable AML
> code
> [    0.098420] ACPI: Interpreter enabled
> [    0.098429] ACPI: (supports S0 S1 S4 S5)
> [    0.098469] ACPI: Using IOAPIC for interrupt routing
> [    0.113378] ACPI Warning: Incorrect checksum in table [OEMB] - 0xA3,
> should be 0x95 (20100428/tbutils-314)
> [    0.113584] ACPI: No dock devices found.
> [    0.113594] PCI: Ignoring host bridge windows from ACPI; if
> necessary, use "pci=use_crs" and report a bug
> [    0.113840] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
> [    0.114289] pci_root PNP0A03:00: host bridge window [io
> 0x0000-0x0cf7] (ignored)
> [    0.114296] pci_root PNP0A03:00: host bridge window [io
> 0x0d00-0xffff] (ignored)
> [    0.114302] pci_root PNP0A03:00: host bridge window [mem
> 0x000a0000-0x000bffff] (ignored)
> [    0.114308] pci_root PNP0A03:00: host bridge window [mem
> 0x80000000-0xffffffff] (ignored)
> [    0.114352] pci 0000:00:00.0: reg 10: [mem 0xf8000000-0xfbffffff
> pref]
> [    0.114792] pci 0000:00:01.0: supports D1
> [    0.114847] pci 0000:00:09.0: reg 10: [io  0xb800-0xb8ff]
> [    0.114860] pci 0000:00:09.0: reg 14: [mem 0xfebff400-0xfebff4ff]
> [    0.114919] pci 0000:00:09.0: supports D1 D2
> [    0.114923] pci 0000:00:09.0: PME# supported from D1 D2 D3hot D3cold
> [    0.114932] pci 0000:00:09.0: PME# disabled
> [    0.114976] pci 0000:00:0a.0: reg 10: [io  0xbc00-0xbc3f]
> [    0.115040] pci 0000:00:0a.0: supports D2
> [    0.115073] pci 0000:00:0b.0: reg 10: [mem 0xfebfc000-0xfebfdfff]
> [    0.115157] pci 0000:00:0c.0: reg 10: [mem 0xfebe0000-0xfebeffff]
> [    0.115169] pci 0000:00:0c.0: reg 14: [io  0xc000-0xc007]
> [    0.115227] pci 0000:00:0c.0: PME# supported from D0 D3hot D3cold
> [    0.115235] pci 0000:00:0c.0: PME# disabled
> [    0.115284] pci 0000:00:0f.0: reg 10: [io  0xec00-0xec07]
> [    0.115296] pci 0000:00:0f.0: reg 14: [io  0xe800-0xe803]
> [    0.115307] pci 0000:00:0f.0: reg 18: [io  0xe400-0xe407]
> [    0.115318] pci 0000:00:0f.0: reg 1c: [io  0xe000-0xe003]
> [    0.115330] pci 0000:00:0f.0: reg 20: [io  0xdc00-0xdc0f]
> [    0.115341] pci 0000:00:0f.0: reg 24: [io  0xd800-0xd8ff]
> [    0.115439] pci 0000:00:0f.1: reg 20: [io  0xfc00-0xfc0f]
> [    0.115562] pci 0000:00:10.0: reg 20: [io  0xc400-0xc41f]
> [    0.115603] pci 0000:00:10.0: supports D1 D2
> [    0.115607] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot
> D3cold
> [    0.115616] pci 0000:00:10.0: PME# disabled
> [    0.115683] pci 0000:00:10.1: reg 20: [io  0xc800-0xc81f]
> [    0.115723] pci 0000:00:10.1: supports D1 D2
> [    0.115727] pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot
> D3cold
> [    0.115736] pci 0000:00:10.1: PME# disabled
> [    0.115802] pci 0000:00:10.2: reg 20: [io  0xcc00-0xcc1f]
> [    0.115842] pci 0000:00:10.2: supports D1 D2
> [    0.115846] pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot
> D3cold
> [    0.115855] pci 0000:00:10.2: PME# disabled
> [    0.115923] pci 0000:00:10.3: reg 20: [io  0xd000-0xd01f]
> [    0.115962] pci 0000:00:10.3: supports D1 D2
> [    0.115967] pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot
> D3cold
> [    0.115975] pci 0000:00:10.3: PME# disabled
> [    0.116042] pci 0000:00:10.4: reg 10: [mem 0xfebff800-0xfebff8ff]
> [    0.116105] pci 0000:00:10.4: supports D1 D2
> [    0.116110] pci 0000:00:10.4: PME# supported from D0 D1 D2 D3hot
> D3cold
> [    0.116118] pci 0000:00:10.4: PME# disabled
> [    0.116209] HPET not enabled in BIOS. You might try hpet=force boot
> option
> [    0.116291] pci 0000:00:12.0: reg 10: [io  0xd400-0xd4ff]
> [    0.116302] pci 0000:00:12.0: reg 14: [mem 0xfebffc00-0xfebffcff]
> [    0.116362] pci 0000:00:12.0: supports D1 D2
> [    0.116367] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot
> D3cold
> [    0.116375] pci 0000:00:12.0: PME# disabled
> [    0.116482] pci 0000:01:00.0: reg 10: [mem 0xfd000000-0xfdffffff]
> [    0.116493] pci 0000:01:00.0: reg 14: [mem 0xe8000000-0xefffffff
> pref]
> [    0.116525] pci 0000:01:00.0: reg 30: [mem 0xfeaf0000-0xfeafffff
> pref]
> [    0.116607] pci 0000:00:01.0: PCI bridge to [bus 01-01]
> [    0.116615] pci 0000:00:01.0:   bridge window [io  0xf000-0x0000]
> (disabled)
> [    0.116625] pci 0000:00:01.0:   bridge window [mem
> 0xfca00000-0xfeafffff]
> [    0.116634] pci 0000:00:01.0:   bridge window [mem
> 0xe7f00000-0xf7efffff pref]
> [    0.116648] pci_bus 0000:00: on NUMA node 0
> [    0.116660] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
> [    0.132141] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 *11 14
> 15)
> [    0.132341] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *10 11 14
> 15)
> [    0.132530] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 7 10 11 14
> 15)
> [    0.132719] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 7 10 11 14
> 15)
> [    0.132908] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 14
> 15) *0, disabled.
> [    0.133099] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 14
> 15) *0, disabled.
> [    0.133299] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 14
> 15) *0, disabled.
> [    0.133487] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 14
> 15) *0, disabled.
> [    0.133569] HEST: Table is not found!
> [    0.133767] vgaarb: device added: PCI:0000:01:00.0,decodes=io
> +mem,owns=io+mem,locks=none
> [    0.133773] vgaarb: loaded
> [    0.134117] SCSI subsystem initialized
> [    0.134256] libata version 3.00 loaded.
> [    0.134394] usbcore: registered new interface driver usbfs
> [    0.134421] usbcore: registered new interface driver hub
> [    0.134489] usbcore: registered new device driver usb
> [    0.134825] ACPI: WMI: Mapper loaded
> [    0.134832] PCI: Using ACPI for IRQ routing
> [    0.134841] PCI: pci_cache_line_size set to 64 bytes
> [    0.134983] reserve RAM buffer: 000000000009fc00 - 000000000009ffff
> [    0.134990] reserve RAM buffer: 000000007ff30000 - 000000007fffffff
> [    0.135214] NetLabel: Initializing
> [    0.135220] NetLabel:  domain hash size = 128
> [    0.135223] NetLabel:  protocols = UNLABELED CIPSOv4
> [    0.135249] NetLabel:  unlabeled traffic allowed by default
> [    0.135372] Switching to clocksource tsc
> [    0.151916] AppArmor: AppArmor Filesystem Enabled
> [    0.151954] pnp: PnP ACPI init
> [    0.151997] ACPI: bus type pnp registered
> [    0.160017] pnp: PnP ACPI: found 13 devices
> [    0.160024] ACPI: ACPI bus type pnp unregistered
> [    0.160032] PnPBIOS: Disabled by ACPI PNP
> [    0.160064] system 00:08: [io  0x0295-0x0296] has been reserved
> [    0.160072] system 00:08: [io  0x03e0-0x03e7] has been reserved
> [    0.160078] system 00:08: [io  0x04d0-0x04d1] has been reserved
> [    0.160084] system 00:08: [io  0x0800-0x087f] has been reserved
> [    0.160090] system 00:08: [io  0x0400-0x041f] has been reserved
> [    0.160105] system 00:09: [mem 0xfec80000-0xfec800ff] has been
> reserved
> [    0.160113] system 00:09: [mem 0xfec00000-0xfec00fff] could not be
> reserved
> [    0.160119] system 00:09: [mem 0xfee00000-0xfee00fff] has been
> reserved
> [    0.160126] system 00:09: [mem 0xfff80000-0xffffffff] could not be
> reserved
> [    0.160139] system 00:0c: [mem 0x00000000-0x0009ffff] could not be
> reserved
> [    0.160146] system 00:0c: [mem 0x000c0000-0x000dffff] could not be
> reserved
> [    0.160153] system 00:0c: [mem 0x000e0000-0x000fffff] could not be
> reserved
> [    0.160159] system 00:0c: [mem 0x00100000-0x7fffffff] could not be
> reserved
> [    0.197944] pci 0000:00:01.0: PCI bridge to [bus 01-01]
> [    0.197951] pci 0000:00:01.0:   bridge window [io  disabled]
> [    0.197963] pci 0000:00:01.0:   bridge window [mem
> 0xfca00000-0xfeafffff]
> [    0.197972] pci 0000:00:01.0:   bridge window [mem
> 0xe7f00000-0xf7efffff pref]
> [    0.198003] pci 0000:00:01.0: setting latency timer to 64
> [    0.198013] pci_bus 0000:00: resource 0 [io  0x0000-0xffff]
> [    0.198018] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
> [    0.198024] pci_bus 0000:01: resource 1 [mem 0xfca00000-0xfeafffff]
> [    0.198030] pci_bus 0000:01: resource 2 [mem 0xe7f00000-0xf7efffff
> pref]
> [    0.198109] NET: Registered protocol family 2
> [    0.198239] IP route cache hash table entries: 32768 (order: 5,
> 131072 bytes)
> [    0.198805] TCP established hash table entries: 131072 (order: 8,
> 1048576 bytes)
> [    0.200151] TCP bind hash table entries: 65536 (order: 7, 524288
> bytes)
> [    0.200899] TCP: Hash tables configured (established 131072 bind
> 65536)
> [    0.200906] TCP reno registered
> [    0.200919] UDP hash table entries: 512 (order: 2, 16384 bytes)
> [    0.200944] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
> [    0.201165] NET: Registered protocol family 1
> [    0.201220] pci 0000:00:01.0: disabling DAC on VIA PCI bridge
> [    0.201373] pci 0000:00:11.0: Bypassing VIA 8237 APIC De-Assert
> Message
> [    0.201402] pci 0000:01:00.0: Boot video device
> [    0.201409] PCI: CLS 32 bytes, default 64
> [    0.201725] cpufreq-nforce2: No nForce2 chipset.
> [    0.201793] Scanning for low memory corruption every 60 seconds
> [    0.202042] audit: initializing netlink socket (disabled)
> [    0.202067] type=2000 audit(1290761969.200:1): initialized
> [    0.218113] Trying to unpack rootfs image as initramfs...
> [    0.237237] highmem bounce pool size: 64 pages
> [    0.237252] HugeTLB registered 4 MB page size, pre-allocated 0 pages
> [    0.244817] VFS: Disk quotas dquot_6.5.2
> [    0.244998] Dquot-cache hash table entries: 1024 (order 0, 4096
> bytes)
> [    0.246420] fuse init (API version 7.14)
> [    0.246656] msgmni has been set to 1683
> [    0.253546] Block layer SCSI generic (bsg) driver version 0.4 loaded
> (major 253)
> [    0.253555] io scheduler noop registered
> [    0.253559] io scheduler deadline registered
> [    0.253598] io scheduler cfq registered (default)
> [    0.253873] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
> [    0.253919] pciehp: PCI Express Hot Plug Controller Driver version:
> 0.4
> [    0.254310] input: Power Button
> as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
> [    0.254324] ACPI: Power Button [PWRB]
> [    0.254415] input: Power Button
> as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
> [    0.254423] ACPI: Power Button [PWRF]
> [    0.254763] ACPI: acpi_idle registered with cpuidle
> [    0.260226] ERST: Table is not found!
> [    0.264754] isapnp: Scanning for PnP cards...
> [    0.270593] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
> [    0.270744] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
> [    0.271506] 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
> [    0.278591] brd: module loaded
> [    0.279703] loop: module loaded
> [    0.280258]   alloc irq_desc for 20 on node -1
> [    0.280265]   alloc kstat_irqs on node -1
> [    0.280281] pata_acpi 0000:00:0f.1: PCI INT A -> GSI 20 (level, low)
> -> IRQ 20
> [    0.280370] pata_acpi 0000:00:0f.1: PCI INT A disabled
> [    0.329151] Fixed MDIO Bus: probed
> [    0.329236] PPP generic driver version 2.4.2
> [    0.329391] tun: Universal TUN/TAP device driver, 1.6
> [    0.329396] tun: (C) 1999-2004 Max Krasnyansky <maxk@xxxxxxxxxxxx>
> [    0.329595] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI)
> Driver
> [    0.329654]   alloc irq_desc for 21 on node -1
> [    0.329659]   alloc kstat_irqs on node -1
> [    0.329675] ehci_hcd 0000:00:10.4: PCI INT C -> GSI 21 (level, low)
> -> IRQ 21
> [    0.329709] ehci_hcd 0000:00:10.4: EHCI Host Controller
> [    0.329820] ehci_hcd 0000:00:10.4: new USB bus registered, assigned
> bus number 1
> [    0.329925] ehci_hcd 0000:00:10.4: irq 21, io mem 0xfebff800
> [    0.340939] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00
> [    0.341289] hub 1-0:1.0: USB hub found
> [    0.341301] hub 1-0:1.0: 8 ports detected
> [    0.341449] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
> [    0.341487] uhci_hcd: USB Universal Host Controller Interface driver
> [    0.341579] uhci_hcd 0000:00:10.0: PCI INT A -> GSI 21 (level, low)
> -> IRQ 21
> [    0.341597] uhci_hcd 0000:00:10.0: UHCI Host Controller
> [    0.341710] uhci_hcd 0000:00:10.0: new USB bus registered, assigned
> bus number 2
> [    0.341752] uhci_hcd 0000:00:10.0: irq 21, io base 0x0000c400
> [    0.342036] hub 2-0:1.0: USB hub found
> [    0.342048] hub 2-0:1.0: 2 ports detected
> [    0.342172] uhci_hcd 0000:00:10.1: PCI INT A -> GSI 21 (level, low)
> -> IRQ 21
> [    0.342188] uhci_hcd 0000:00:10.1: UHCI Host Controller
> [    0.342288] uhci_hcd 0000:00:10.1: new USB bus registered, assigned
> bus number 3
> [    0.342327] uhci_hcd 0000:00:10.1: irq 21, io base 0x0000c800
> [    0.342603] hub 3-0:1.0: USB hub found
> [    0.342615] hub 3-0:1.0: 2 ports detected
> [    0.342745] uhci_hcd 0000:00:10.2: PCI INT B -> GSI 21 (level, low)
> -> IRQ 21
> [    0.342761] uhci_hcd 0000:00:10.2: UHCI Host Controller
> [    0.342867] uhci_hcd 0000:00:10.2: new USB bus registered, assigned
> bus number 4
> [    0.342908] uhci_hcd 0000:00:10.2: irq 21, io base 0x0000cc00
> [    0.343201] hub 4-0:1.0: USB hub found
> [    0.343213] hub 4-0:1.0: 2 ports detected
> [    0.343342] uhci_hcd 0000:00:10.3: PCI INT B -> GSI 21 (level, low)
> -> IRQ 21
> [    0.343357] uhci_hcd 0000:00:10.3: UHCI Host Controller
> [    0.343457] uhci_hcd 0000:00:10.3: new USB bus registered, assigned
> bus number 5
> [    0.343495] uhci_hcd 0000:00:10.3: irq 21, io base 0x0000d000
> [    0.343766] hub 5-0:1.0: USB hub found
> [    0.343777] hub 5-0:1.0: 2 ports detected
> [    0.344008] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
> [    0.344014] PNP: PS/2 appears to have AUX port disabled, if this is
> incorrect please boot with i8042.nopnp
> [    0.344264] serio: i8042 KBD port at 0x60,0x64 irq 1
> [    0.344518] mice: PS/2 mouse device common for all mice
> [    0.344827] rtc_cmos 00:02: RTC can wake from S4
> [    0.344924] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
> [    0.344991] rtc0: alarms up to one year, y3k, 114 bytes nvram
> [    0.345252] device-mapper: uevent: version 1.0.3
> [    0.348880] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05)
> initialised: dm-devel@xxxxxxxxxx
> [    0.355518] device-mapper: multipath: version 1.1.1 loaded
> [    0.355528] device-mapper: multipath round-robin: version 1.0.0
> loaded
> [    0.355924] EISA: Probing bus 0 at eisa.0
> [    0.355974] EISA: Detected 0 cards.
> [    0.360812] cpuidle: using governor ladder
> [    0.360819] cpuidle: using governor menu
> [    0.361565] TCP cubic registered
> [    0.361879] NET: Registered protocol family 10
> [    0.362652] lo: Disabled Privacy Extensions
> [    0.363131] NET: Registered protocol family 17
> [    0.363249] Using IPI No-Shortcut mode
> [    0.363476] PM: Resume from disk failed.
> [    0.363513] registered taskstats version 1
> [    0.363913]   Magic number: 2:275:979
> [    0.364062] rtc_cmos 00:02: setting system clock to 2010-11-26
> 08:59:29 UTC (1290761969)
> [    0.364071] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
> [    0.364075] EDD information not available.
> [    0.369008] input: AT Translated Set 2 keyboard
> as /devices/platform/i8042/serio0/input/input2
> [    0.948904] isapnp: No Plug & Play device found
> [    1.004753] usb 1-4: new high speed USB device using ehci_hcd and
> address 4
> [    1.181425] Freeing initrd memory: 10512k freed
> [    1.195852] Freeing unused kernel memory: 684k freed
> [    1.197022] Write protecting the kernel text: 4932k
> [    1.197090] Write protecting the kernel read-only data: 1976k
> [    1.251206] udev[63]: starting version 163
> [    1.320116] usb 1-7: new high speed USB device using ehci_hcd and
> address 6
> [    1.773567] Floppy drive(s): fd0 is 1.44M
> [    1.798520] sata_via 0000:00:0f.0: version 2.6
> [    1.798553] sata_via 0000:00:0f.0: PCI INT B -> GSI 20 (level, low)
> -> IRQ 20
> [    1.798633] sata_via 0000:00:0f.0: routed to hard irq line 10
> [    1.800759] 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22,
> 2004)
> [    1.808071] usb 2-1: new full speed USB device using uhci_hcd and
> address 2
> [    1.822267] scsi0 : sata_via
> [    1.826678] via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald
> Becker
> [    1.838931] FDC 0 is a post-1991 82077
> [    1.842175] scsi1 : sata_via
> [    1.842307] ata1: SATA max UDMA/133 cmd 0xec00 ctl 0xe800 bmdma
> 0xdc00 irq 20
> [    1.842314] ata2: SATA max UDMA/133 cmd 0xe400 ctl 0xe000 bmdma
> 0xdc08 irq 20
> [    1.842446] 8139cp 0000:00:09.0: This (id 10ec:8139 rev 10) is not an
> 8139C+ compatible chip, use 8139too
> [    1.842507] pata_via 0000:00:0f.1: version 0.3.4
> [    1.842536] pata_via 0000:00:0f.1: PCI INT A -> GSI 20 (level, low)
> -> IRQ 20
> [    1.862368] scsi2 : pata_via
> [    1.876158] scsi3 : pata_via
> [    1.880620] ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00
> irq 14
> [    1.880628] ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfc08
> irq 15
> [    1.889920]   alloc irq_desc for 23 on node -1
> [    1.889928]   alloc kstat_irqs on node -1
> [    1.889944] via-rhine 0000:00:12.0: PCI INT A -> GSI 23 (level, low)
> -> IRQ 23
> [    1.891012] eth0: VIA Rhine II at 0xfebffc00, 00:0b:6a:a2:89:18, IRQ
> 23.
> [    1.891730] eth0: MII PHY found at address 1, status 0x7849
> advertising 05e1 Link 0000.
> [    1.892531]   alloc irq_desc for 19 on node -1
> [    1.892538]   alloc kstat_irqs on node -1
> [    1.892553] b43-pci-bridge 0000:00:0b.0: PCI INT A -> GSI 19 (level,
> low) -> IRQ 19
> [    1.892619] ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x04, vendor
> 0x4243)
> [    1.892629] ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x05,
> vendor 0x4243)
> [    1.892639] ssb: Core 2 found: PCMCIA (cc 0x80D, rev 0x02, vendor
> 0x4243)
> [    1.892649] ssb: Core 3 found: V90 (cc 0x807, rev 0x02, vendor
> 0x4243)
> [    1.892658] ssb: Core 4 found: PCI (cc 0x804, rev 0x09, vendor
> 0x4243)
> [    1.911748] Initializing USB Mass Storage driver...
> [    1.920509] ssb: Sonics Silicon Backplane found on PCI device
> 0000:00:0b.0
> [    1.932580] scsi4 : usb-storage 1-7:1.0
> [    1.941685] usbcore: registered new interface driver usb-storage
> [    1.941694] USB Mass Storage support registered.
> [    2.044084] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
> [    2.234323] ata1.00: ATA-8: ST3500418AS, CC34, max UDMA/133
> [    2.234333] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth
> 0/32)
> [    2.276026] usb 3-1: new full speed USB device using uhci_hcd and
> address 2
> [    2.290345] ata1.00: configured for UDMA/133
> [    2.290561] scsi 0:0:0:0: Direct-Access     ATA      ST3500418AS
> CC34 PQ: 0 ANSI: 5
> [    2.290941] sd 0:0:0:0: Attached scsi generic sg0 type 0
> [    2.291649] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500
> GB/465 GiB)
> [    2.291769] sd 0:0:0:0: [sda] Write Protect is off
> [    2.291776] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
> [    2.291825] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
> enabled, doesn't support DPO or FUA
> [    2.292233]  sda: sda1 sda2 < sda5 >
> [    2.324420] sd 0:0:0:0: [sda] Attached SCSI disk
> [    2.492036] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
> [    2.656394] ata2.00: ATA-6: ST380817AS, 3.42, max UDMA/133
> [    2.656401] ata2.00: 156301488 sectors, multi 16: LBA48 NCQ (not
> used)
> [    2.672414] ata2.00: configured for UDMA/133
> [    2.672640] scsi 1:0:0:0: Direct-Access     ATA      ST380817AS
> 3.42 PQ: 0 ANSI: 5
> [    2.673006] sd 1:0:0:0: Attached scsi generic sg1 type 0
> [    2.673833] sd 1:0:0:0: [sdb] 156301488 512-byte logical blocks:
> (80.0 GB/74.5 GiB)
> [    2.673952] sd 1:0:0:0: [sdb] Write Protect is off
> [    2.673959] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
> [    2.674008] sd 1:0:0:0: [sdb] Write cache: enabled, read cache:
> enabled, doesn't support DPO or FUA
> [    2.674382]  sdb: sdb1 sdb2
> [    2.692229] sd 1:0:0:0: [sdb] Attached SCSI disk
> [    2.700032] usb 4-1: new low speed USB device using uhci_hcd and
> address 2
> [    2.844459] ata4.00: ATAPI: HL-DT-ST DVDRAM GSA-4040B, A300, max
> UDMA/33
> [    2.844532] ata4.01: ATAPI: HL-DT-STDVD-ROM GDR8162B, 0015, max
> UDMA/33
> [    2.860428] ata4.00: configured for UDMA/33
> [    2.875690] usbcore: registered new interface driver hiddev
> [    2.876375] ata4.01: configured for UDMA/33
> [    2.881375] input: Plantronics Plantronics Headset
> as /devices/pci0000:00/0000:00:10.0/usb2/2-1/2-1:1.3/input/input3
> [    2.881928] generic-usb 0003:047F:0CA1.0001: input,hidraw0: USB HID
> v1.00 Device [Plantronics Plantronics Headset] on
> usb-0000:00:10.0-1/input3
> [    2.891585] scsi 3:0:0:0: CD-ROM            HL-DT-ST DVDRAM GSA-4040B
> A300 PQ: 0 ANSI: 5
> [    2.896097] sr0: scsi3-mmc drive: 32x/32x writer dvd-ram cd/rw
> xa/form2 cdda tray
> [    2.896106] Uniform CD-ROM driver Revision: 3.20
> [    2.896430] sr 3:0:0:0: Attached scsi CD-ROM sr0
> [    2.896603] sr 3:0:0:0: Attached scsi generic sg2 type 5
> [    2.899393] input: HID ffc0:0001
> as /devices/pci0000:00/0000:00:10.2/usb4/4-1/4-1:1.0/input/input4
> [    2.900469] generic-usb 0003:FFC0:0001.0002: input,hidraw1: USB HID
> v1.10 Mouse [HID ffc0:0001] on usb-0000:00:10.2-1/input0
> [    2.901035] usbcore: registered new interface driver usbhid
> [    2.901045] usbhid: USB HID core driver
> [    2.903308] scsi 3:0:1:0: CD-ROM            HL-DT-ST DVD-ROM GDR8162B
> 0015 PQ: 0 ANSI: 5
> [    2.919720] sr1: scsi3-mmc drive: 20x/48x cd/rw xa/form2 cdda tray
> [    2.920964] sr 3:0:1:0: Attached scsi CD-ROM sr1
> [    2.921475] sr 3:0:1:0: Attached scsi generic sg3 type 5
> [    2.979306] scsi 4:0:0:0: Direct-Access     Generic  USB SD Reader
> 1.00 PQ: 0 ANSI: 0
> [    2.984938] scsi 4:0:0:1: Direct-Access     Generic  USB CF Reader
> 1.01 PQ: 0 ANSI: 0
> [    2.985616] scsi 4:0:0:2: Direct-Access     Generic  USB SM Reader
> 1.02 PQ: 0 ANSI: 0
> [    2.987226] scsi 4:0:0:3: Direct-Access     Generic  USB MS Reader
> 1.03 PQ: 0 ANSI: 0
> [    2.990469] sd 4:0:0:0: [sdc] Attached SCSI removable disk
> [    3.002305] sd 4:0:0:0: Attached scsi generic sg4 type 0
> [    3.008526] sd 4:0:0:1: [sdd] Attached SCSI removable disk
> [    3.011463] sd 4:0:0:1: Attached scsi generic sg5 type 0
> [    3.013704] sd 4:0:0:2: [sde] Attached SCSI removable disk
> [    3.019434] sd 4:0:0:2: Attached scsi generic sg6 type 0
> [    3.019976] sd 4:0:0:3: Attached scsi generic sg7 type 0
> [    3.021456] sd 4:0:0:3: [sdf] Attached SCSI removable disk
> [    3.036521] 8139too: 8139too Fast Ethernet driver 0.9.28
> [    3.036594]   alloc irq_desc for 17 on node -1
> [    3.036600]   alloc kstat_irqs on node -1
> [    3.036616] 8139too 0000:00:09.0: PCI INT A -> GSI 17 (level, low) ->
> IRQ 17
> [    3.038186] 8139too 0000:00:09.0: eth1: RealTek RTL8139 at 0xb800,
> 00:02:44:37:94:06, IRQ 17
> [    3.096144] usb 5-2: new full speed USB device using uhci_hcd and
> address 2
> [    3.423803] EXT4-fs (sda1): mounted filesystem with ordered data
> mode. Opts: (null)
> [   11.464833] Adding 6033404k swap on /dev/sda5.  Priority:-1 extents:1
> across:6033404k
> [   11.640258] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
> [   11.648944] udev[347]: starting version 163
> [   11.848822] lp: driver loaded but no devices found
> [   12.284333] shpchp: Standard Hot Plug PCI Controller Driver version:
> 0.4
> [   12.510863] Linux agpgart interface v0.103
> [   12.542230] type=1400 audit(1290758381.674:2): apparmor="STATUS"
> operation="profile_load" name="/sbin/dhclient3" pid=460
> comm="apparmor_parser"
> [   12.543171] type=1400 audit(1290758381.674:3): apparmor="STATUS"
> operation="profile_load"
> name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=460
> comm="apparmor_parser"
> [   12.543687] type=1400 audit(1290758381.674:4): apparmor="STATUS"
> operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script"
> pid=460 comm="apparmor_parser"
> [   12.678390] WARNING! power/level is deprecated; use power/control
> instead
> [   12.745203] agpgart: Detected VIA PT880 chipset
> [   12.891651] parport_pc 00:06: reported by Plug and Play ACPI
> [   12.891785] parport0: PC-style at 0x378 (0x778), irq 7, dma 3
> [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
> [   13.020283] agpgart-via 0000:00:00.0: AGP aperture is 64M @
> 0xf8000000
> [   13.136496] lp0: using parport0 (interrupt-driven).
> [   13.749280] cfg80211: Calling CRDA to update world regulatory domain
> [   13.749438] gameport gameport0: NS558 PnP Gameport is
> pnp00:07/gameport0, io 0x200, speed 774kHz
> [   14.156396] ppdev: user-space parallel port driver
> [   14.166028] cfg80211: World regulatory domain updated:
> [   14.166039]     (start_freq - end_freq @ bandwidth),
> (max_antenna_gain, max_eirp)
> [   14.166046]     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi,
> 2000 mBm)
> [   14.166053]     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi,
> 2000 mBm)
> [   14.166059]     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi,
> 2000 mBm)
> [   14.166065]     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi,
> 2000 mBm)
> [   14.166071]     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi,
> 2000 mBm)
> [   14.342222] [drm] Initialized drm 1.1.0 20060810
> [   14.543343] b43-phy0: Broadcom 4306 WLAN found (core revision 5)
> [   15.007851] phy0: Selected rate control algorithm 'minstrel'
> [   15.009306] Registered led device: b43-phy0::tx
> [   15.009353] Registered led device: b43-phy0::rx
> [   15.009392] Registered led device: b43-phy0::radio
> [   15.009566] Broadcom 43xx driver loaded [ Features: PL, Firmware-ID:
> FW13 ]
> [   15.009852] phy1: Selected rate control algorithm 'minstrel'
> [   15.011345] phy1: hwaddr 00:e0:4c:8d:ab:4b, RTL8187BvE V0 +
> rtl8225z2, rfkill mask 2
> [   15.048889] rtl8187: Customer ID is 0x00
> [   15.050291] Registered led device: rtl8187-phy1::radio
> [   15.052352] Registered led device: rtl8187-phy1::tx
> [   15.052887] Registered led device: rtl8187-phy1::rx
> [   15.054631] rtl8187: wireless switch is on
> [   15.055206] usbcore: registered new interface driver rtl8187
> [   15.241118] udev[367]: renamed network interface wlan1 to wlan3
> [   15.378019]   alloc irq_desc for 16 on node -1
> [   15.378027]   alloc kstat_irqs on node -1
> [   15.378043] nouveau 0000:01:00.0: PCI INT A -> GSI 16 (level, low) ->
> IRQ 16
> [   15.443374] [drm] nouveau 0000:01:00.0: Detected an NV10 generation
> card (0x011000b2)
> [   15.443743] [drm] nouveau 0000:01:00.0: Attempting to load BIOS image
> from PRAMIN
> [   15.490461] [drm] nouveau 0000:01:00.0: ... appears to be valid
> [   15.490652] [drm] nouveau 0000:01:00.0: BMP BIOS found
> [   15.490657] [drm] nouveau 0000:01:00.0: BMP version 5.20
> [   15.490663] [drm] nouveau 0000:01:00.0: Bios version 03.11.01.43
> [   15.490670] [drm] nouveau 0000:01:00.0: Found Display Configuration
> Block version 1.4
> [   15.490675] [drm] nouveau 0000:01:00.0: No useful information in BIOS
> output table; adding all possible outputs
> [   15.490680] [drm] nouveau 0000:01:00.0: Probing TV encoders on I2C
> bus: 1
> [   15.536605] usbcore: registered new interface driver snd-usb-audio
> [   15.559335]   alloc irq_desc for 18 on node -1
> [   15.559342]   alloc kstat_irqs on node -1
> [   15.559358] ENS1371 0000:00:0a.0: PCI INT A -> GSI 18 (level, low) ->
> IRQ 18
> [   15.635068] eth1: link down
> [   15.635910] ADDRCONF(NETDEV_UP): eth1: link is not ready
> [   15.727655] type=1400 audit(1290758384.858:5): apparmor="STATUS"
> operation="profile_load" name="/usr/share/gdm/guest-session/Xsession"
> pid=906 comm="apparmor_parser"
> [   15.783164] type=1400 audit(1290758384.914:6): apparmor="STATUS"
> operation="profile_replace" name="/sbin/dhclient3" pid=912
> comm="apparmor_parser"
> [   15.784558] type=1400 audit(1290758384.918:7): apparmor="STATUS"
> operation="profile_replace"
> name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=912
> comm="apparmor_parser"
> [   15.785084] type=1400 audit(1290758384.918:8): apparmor="STATUS"
> operation="profile_replace"
> name="/usr/lib/connman/scripts/dhclient-script" pid=912
> comm="apparmor_parser"
> [   15.929691] [drm] nouveau 0000:01:00.0: Detected TV encoder: ch7006
> [   15.929882] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at
> offset 0xB74C
> [   15.929904] [drm] nouveau 0000:01:00.0: 0xB766: Failed parsing init
> table opcode: INIT_CONFIGURE_PREINIT -19
> [   15.929985] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at
> offset 0xBE3A
> [   15.929996] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at
> offset 0xB767
> [   15.930020] [drm] nouveau 0000:01:00.0: 0xB7F9: Failed parsing init
> table opcode: INIT_CONFIGURE_CLK -19
> [   15.930094] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at
> offset 0xBDE1
> [   15.930108] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at
> offset 0xB7FA
> [   15.930114] [drm] nouveau 0000:01:00.0: 0xB81E: Failed parsing init
> table opcode: INIT_CONFIGURE_MEM -19
> [   15.930189] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 5 at
> offset 0xB94E
> [   15.930214] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 6 at
> offset 0xB81F
> [   15.930245] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 7 at
> offset 0xB8E9
> [   15.930257] [drm] nouveau 0000:01:00.0: Detected 64MiB VRAM
> [   15.962512] type=1400 audit(1290758385.094:9): apparmor="STATUS"
> operation="profile_load" name="/usr/bin/evince" pid=917
> comm="apparmor_parser"
> [   15.971296] [TTM] Zone  kernel: Available graphics memory: 436544
> kiB.
> [   15.971304] [TTM] Zone highmem: Available graphics memory: 1030052
> kiB.
> [   15.971308] [TTM] Initializing pool allocator.
> [   15.971534] agpgart-via 0000:00:00.0: AGP 3.5 bridge
> [   15.971564] agpgart-via 0000:00:00.0: bridge is in legacy mode,
> falling back to 2.x
> [   15.971575] agpgart-via 0000:00:00.0: putting AGP V2 device into 4x
> mode
> [   15.971697] nouveau 0000:01:00.0: putting AGP V2 device into 4x mode
> [   15.971704] [drm] nouveau 0000:01:00.0: 64 MiB GART (aperture)
> [   15.973169] [drm] nouveau 0000:01:00.0: Allocating FIFO number 0
> [   15.975138] [drm] nouveau 0000:01:00.0: nouveau_channel_alloc:
> initialised FIFO 0
> [   15.975160] [drm] nouveau 0000:01:00.0: Initial CRTC_OWNER is 0
> [   15.975173] [drm] nouveau 0000:01:00.0: Saving VGA fonts
> [   16.031949] type=1400 audit(1290758385.162:10): apparmor="STATUS"
> operation="profile_load" name="/usr/bin/evince-previewer" pid=917
> comm="apparmor_parser"
> [   16.078981] type=1400 audit(1290758385.210:11): apparmor="STATUS"
> operation="profile_load" name="/usr/bin/evince-thumbnailer" pid=917
> comm="apparmor_parser"
> [   16.117521] b43-phy0: Loading firmware version 410.2160 (2007-05-26
> 15:32:10)
> [   16.149942] [drm] nouveau 0000:01:00.0: Probing TV encoders on I2C
> bus: 1
> [   16.150869] [drm] nouveau 0000:01:00.0: Detected TV encoder: ch7006
> [   16.190965] ch7006 1-0075: Detected version ID: 50
> [   16.198806] [drm] nouveau 0000:01:00.0: Detected a VGA connector
> [   16.199348] [drm] nouveau 0000:01:00.0: Detected a TV connector
> [   16.210086] ADDRCONF(NETDEV_UP): wlan0: link is not ready
> [   16.372589] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga
> encoder (output 0)
> [   16.372599] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on TV
> encoder (output 1)
> [   16.916856] [drm] nouveau 0000:01:00.0: allocated 1440x900 fb:
> 0x49000, bo f47ec800
> [   16.993377] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on TV
> encoder (output 1)
> [   17.003573] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga
> encoder (output 0)
> [   17.003581] [drm] nouveau 0000:01:00.0: Output VGA-1 is running on
> CRTC 0 using output @
> [   17.012339] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on TV
> encoder (output 1)
> [   17.012360] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on TV
> encoder (output 1)
> [   17.023110] Console: switching to colour frame buffer device 180x56
> [   17.027112] fb0: nouveaufb frame buffer device
> [   17.027117] drm: registered panic notifier
> [   17.032174] Slow work thread pool: Starting up
> [   17.032293] Slow work thread pool: Ready
> [   17.032313] [drm] Initialized nouveau 0.0.16 20090420 for
> 0000:01:00.0 on minor 0
> [   20.953556] ADDRCONF(NETDEV_UP): wlan3: link is not ready
> [   20.972974] eth0: link down
> [   20.973348] ADDRCONF(NETDEV_UP): eth0: link is not ready
> [   22.009359] [drm] nouveau 0000:01:00.0: Allocating FIFO number 1
> [   22.010332] [drm] nouveau 0000:01:00.0: nouveau_channel_alloc:
> initialised FIFO 1
> [   29.783390] EXT4-fs (sda1): re-mounted. Opts:
> errors=remount-ro,commit=0
> [   35.526477] slamr: module license 'Smart Link Ltd.' taints kernel.
> [   35.526487] Disabling lock debugging due to kernel taint
> [   35.553152] slamr: SmartLink AMRMO modem.
> [   46.635240] wlan0: authenticate with 00:80:5a:28:6e:0e (try 1)
> [   46.636687] wlan0: authenticated
> [   46.638558] wlan0: associate with 00:80:5a:28:6e:0e (try 1)
> [   46.640566] wlan0: RX AssocResp from 00:80:5a:28:6e:0e (capab=0x431
> status=0 aid=1)
> [   46.640575] wlan0: associated
> [   46.642025] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
> [   52.832089] ata4: lost interrupt (Status 0x58)
> [   52.832139] ata4: drained 24 bytes to clear DRQ.
> [   52.832155] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
> frozen
> [   52.832169] sr 3:0:0:0: CDB: Xdread, Read track info: 52 01 00 00 00
> 01 00 00 20 00
> [   52.832197] ata4.00: cmd a0/01:00:00:20:00/00:00:00:00:00/a0 tag 0
> dma 16416 in
> [   52.832200]          res 40/00:02:00:08:00/00:00:00:00:00/a0 Emask
> 0x4 (timeout)
> [   52.832206] ata4.00: status: { DRDY }
> [   52.888083] ata4: soft resetting link
> [   53.044273] ata4.01: NODEV after polling detection
> [   53.044281] ata4.01: revalidation failed (errno=-2)
> [   57.640046] wlan0: no IPv6 routers present
> [   58.044094] ata4: soft resetting link
> [   58.200215] ata4.01: NODEV after polling detection
> [   58.200223] ata4.01: revalidation failed (errno=-2)
> [   59.784060] cfg80211: Found new beacon on frequency: 2467 MHz (Ch 12)
> on phy1
> [   60.505317] wlan3: authenticate with 00:80:5a:28:6e:0e (try 1)
> [   60.507426] wlan3: authenticated
> [   60.577290] wlan3: associate with 00:80:5a:28:6e:0e (try 1)
> [   60.653917] wlan3: RX AssocResp from 00:80:5a:28:6e:0e (capab=0x431
> status=0 aid=2)
> [   60.653928] wlan3: associated
> [   60.729725] ADDRCONF(NETDEV_CHANGE): wlan3: link becomes ready
> [   63.200071] ata4: soft resetting link
> [   63.356223] ata4.01: NODEV after polling detection
> [   63.356231] ata4.01: revalidation failed (errno=-2)
> [   63.356239] ata4.01: disabled
> [   63.356250] ata4.00: failed to IDENTIFY (I/O error, err_mask=0x40)
> [   63.356255] ata4.00: revalidation failed (errno=-5)
> [   68.356063] ata4: soft resetting link
> [   68.536373] ata4.00: configured for UDMA/33
> [   68.538669] ata4: EH complete
> [   70.896012] wlan3: no IPv6 routers present
> [   71.461218] ISO 9660 Extensions: Microsoft Joliet Level 1
> [   71.547826] ISOFS: changing to secondary root
> [   72.599097] ISO 9660 Extensions: Microsoft Joliet Level 1
> [   72.628085] ISOFS: changing to secondary root
> [   87.332052] No probe response from AP 00:80:5a:28:6e:0e after 500ms,
> disconnecting.
> [  107.382765] wlan0: authenticate with 00:80:5a:28:6e:0e (try 1)
> [  107.580087] wlan0: authenticate with 00:80:5a:28:6e:0e (try 2)
> [  107.581529] wlan0: authenticated
> [  107.581907] wlan0: associate with 00:80:5a:28:6e:0e (try 1)
> [  107.598793] wlan0: RX AssocResp from 00:80:5a:28:6e:0e (capab=0x431
> status=0 aid=1)
> [  107.598802] wlan0: associated
> [  352.548031] No probe response from AP 00:80:5a:28:6e:0e after 500ms,
> disconnecting.
> [  355.169335] wlan3: authenticate with 00:80:5a:28:6e:0e (try 1)
> [  355.368041] wlan3: authenticate with 00:80:5a:28:6e:0e (try 2)
> [  355.568033] wlan3: authenticate with 00:80:5a:28:6e:0e (try 3)
> [  355.768032] wlan3: authentication with 00:80:5a:28:6e:0e timed out
> [  367.465326] wlan3: direct probe to 00:80:5a:28:6e:0e (try 1)
> [  367.664029] wlan3: direct probe to 00:80:5a:28:6e:0e (try 2)
> [  367.864473] wlan3: direct probe to 00:80:5a:28:6e:0e (try 3)
> [  368.064036] wlan3: direct probe to 00:80:5a:28:6e:0e timed out
> [  370.573440] wlan3: direct probe to 00:80:5a:28:6e:0e (try 1)
> [  370.772039] wlan3: direct probe to 00:80:5a:28:6e:0e (try 2)
> [  370.972035] wlan3: direct probe to 00:80:5a:28:6e:0e (try 3)
> [  371.172058] wlan3: direct probe to 00:80:5a:28:6e:0e timed out
> [  382.889436] wlan3: direct probe to 00:80:5a:28:6e:0e (try 1)
> [  383.088034] wlan3: direct probe to 00:80:5a:28:6e:0e (try 2)
> [  383.288040] wlan3: direct probe to 00:80:5a:28:6e:0e (try 3)
> [  383.488242] wlan3: direct probe to 00:80:5a:28:6e:0e timed out
> [  390.564040] No probe response from AP 00:80:5a:28:6e:0e after 500ms,
> disconnecting.
> [  390.564883] cfg80211: All devices are disconnected, going to restore
> regulatory settings
> [  390.564894] cfg80211: Restoring regulatory settings
> [  390.564901] cfg80211: Calling CRDA to update world regulatory domain
> [  390.583824] cfg80211: World regulatory domain updated:
> [  390.583833]     (start_freq - end_freq @ bandwidth),
> (max_antenna_gain, max_eirp)
> [  390.583841]     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi,
> 2000 mBm)
> [  390.583847]     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi,
> 2000 mBm)
> [  390.583853]     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi,
> 2000 mBm)
> [  390.583859]     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi,
> 2000 mBm)
> [  390.583865]     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi,
> 2000 mBm)
> [  391.970389] wlan0: authenticate with 00:80:5a:28:6e:0e (try 1)
> [  392.169050] wlan0: authenticate with 00:80:5a:28:6e:0e (try 2)
> [  392.368055] wlan0: authenticate with 00:80:5a:28:6e:0e (try 3)
> [  392.568068] wlan0: authentication with 00:80:5a:28:6e:0e timed out
> [  395.213284] wlan3: direct probe to 00:80:5a:28:6e:0e (try 1)
> [  395.412171] wlan3: direct probe to 00:80:5a:28:6e:0e (try 2)
> [  395.612036] wlan3: direct probe to 00:80:5a:28:6e:0e (try 3)
> [  395.812040] wlan3: direct probe to 00:80:5a:28:6e:0e timed out
> [  407.601244] wlan3: direct probe to 00:80:5a:28:6e:0e (try 1)
> [  407.800044] wlan3: direct probe to 00:80:5a:28:6e:0e (try 2)
> [  408.000047] wlan3: direct probe to 00:80:5a:28:6e:0e (try 3)
> [  408.200048] wlan3: direct probe to 00:80:5a:28:6e:0e timed out
> [  409.563599] wlan0: direct probe to 00:80:5a:28:6e:0e (try 1)
> [  409.760062] wlan0: direct probe to 00:80:5a:28:6e:0e (try 2)
> [  409.960050] wlan0: direct probe to 00:80:5a:28:6e:0e (try 3)
> [  410.160032] wlan0: direct probe to 00:80:5a:28:6e:0e timed out
> [  420.011084] wlan3: direct probe to 00:80:5a:28:6e:0e (try 1)
> [  420.208087] wlan3: direct probe to 00:80:5a:28:6e:0e (try 2)
> [  420.409443] wlan3: direct probe to 00:80:5a:28:6e:0e (try 3)
> [  420.609257] wlan3: direct probe to 00:80:5a:28:6e:0e timed out
> [  427.180006] wlan0: direct probe to 00:80:5a:28:6e:0e (try 1)
> [  427.380081] wlan0: direct probe to 00:80:5a:28:6e:0e (try 2)
> [  427.580178] wlan0: direct probe to 00:80:5a:28:6e:0e (try 3)
> [  427.780082] wlan0: direct probe to 00:80:5a:28:6e:0e timed out
> [  443.466153] wlan3: direct probe to 00:80:5a:28:6e:0e (try 1)
> [  443.664080] wlan3: direct probe to 00:80:5a:28:6e:0e (try 2)
> [  443.864078] wlan3: direct probe to 00:80:5a:28:6e:0e (try 3)
> [  444.064071] wlan3: direct probe to 00:80:5a:28:6e:0e timed out
> [  451.115366] wlan0: direct probe to 00:80:5a:28:6e:0e (try 1)
> [  451.312079] wlan0: direct probe to 00:80:5a:28:6e:0e (try 2)
> [  451.512086] wlan0: direct probe to 00:80:5a:28:6e:0e (try 3)
> [  451.712049] wlan0: direct probe to 00:80:5a:28:6e:0e timed out
> [  455.842272] wlan3: direct probe to 00:80:5a:28:6e:0e (try 1)
> [  456.040070] wlan3: direct probe to 00:80:5a:28:6e:0e (try 2)
> [  456.240646] wlan3: direct probe to 00:80:5a:28:6e:0e (try 3)
> [  456.441885] wlan3: direct probe to 00:80:5a:28:6e:0e timed out
> [  468.281329] wlan3: direct probe to 00:80:5a:28:6e:0e (try 1)
> [  468.480313] wlan3: direct probe to 00:80:5a:28:6e:0e (try 2)
> [  468.680101] wlan3: direct probe to 00:80:5a:28:6e:0e (try 3)
> [  468.880113] wlan3: direct probe to 00:80:5a:28:6e:0e timed out
> [  480.705338] wlan3: direct probe to 00:80:5a:28:6e:0e (try 1)
> [  480.904081] wlan3: direct probe to 00:80:5a:28:6e:0e (try 2)
> [  481.104110] wlan3: direct probe to 00:80:5a:28:6e:0e (try 3)
> [  481.304090] wlan3: direct probe to 00:80:5a:28:6e:0e timed out
> [  484.266996] wlan0: authenticate with 00:24:d1:16:a7:25 (try 1)
> [  484.269012] wlan0: authenticated
> [  484.269217] wlan0: associate with 00:24:d1:16:a7:25 (try 1)
> [  484.271483] wlan0: RX AssocResp from 00:24:d1:16:a7:25 (capab=0x411
> status=0 aid=1)
> [  484.271492] wlan0: associated
> [  493.116077] wlan3: direct probe to 00:80:5a:28:6e:0e (try 1)
> [  493.316070] wlan3: direct probe to 00:80:5a:28:6e:0e (try 2)
> [  493.516076] wlan3: direct probe to 00:80:5a:28:6e:0e (try 3)
> [  493.716081] wlan3: direct probe to 00:80:5a:28:6e:0e timed out
> [  499.897864] hcfpcihw 0000:00:0c.0: PCI INT A -> GSI 16 (level, low)
> -> IRQ 16
> [  501.044340] ttySHCF0 at I/O 0xc000 (irq = 16) is a Conexant HCF
> controllerless PCI modem (PCI-14f1:1033-1092:0ac8)
> [  501.765444] hcfpcihw 0000:00:0c.0: PCI INT A disabled
> [  503.018257] hcfpcihw 0000:00:0c.0: PCI INT A -> GSI 16 (level, low)
> -> IRQ 16
> [  504.723050] ttySHCF0 at I/O 0xc000 (irq = 16) is a Conexant HCF
> controllerless PCI modem (PCI-14f1:1033-1092:0ac8)
> [  505.215408] hcfpcihw 0000:00:0c.0: PCI INT A disabled
> [  506.805357] hcfpcihw 0000:00:0c.0: PCI INT A -> GSI 16 (level, low)
> -> IRQ 16
> [  508.263459] ttySHCF0 at I/O 0xc000 (irq = 16) is a Conexant HCF
> controllerless PCI modem (PCI-14f1:1033-1092:0ac8)
> [  517.037333] wlan3: authenticate with 00:80:5a:28:6e:0e (try 1)
> [  517.043827] wlan3: authenticated
> [  517.113347] wlan3: associate with 00:80:5a:28:6e:0e (try 1)
> [  517.186862] wlan3: RX AssocResp from 00:80:5a:28:6e:0e (capab=0x431
> status=0 aid=2)
> [  517.186873] wlan3: associated
> [  924.781371] hcfpcihw 0000:00:0c.0: PCI INT A disabled
> [  960.815473] hcfpcihw 0000:00:0c.0: PCI INT A -> GSI 16 (level, low)
> -> IRQ 16
> [  961.595176] ttySHCF0 at I/O 0xc000 (irq = 16) is a Conexant HCF
> controllerless PCI modem (PCI-14f1:1033-1092:0ac8)
> [  961.851799] hcfpcihw 0000:00:0c.0: PCI INT A disabled
> [  963.182548] hcfpcihw 0000:00:0c.0: PCI INT A -> GSI 16 (level, low)
> -> IRQ 16
> [  963.882184] ttySHCF0 at I/O 0xc000 (irq = 16) is a Conexant HCF
> controllerless PCI modem (PCI-14f1:1033-1092:0ac8)
> [  984.612035] No probe response from AP 00:80:5a:28:6e:0e after 500ms,
> disconnecting.
> [  987.282016] wlan3: authenticate with 00:80:5a:28:6e:0e (try 1)
> [  987.480047] wlan3: authenticate with 00:80:5a:28:6e:0e (try 2)
> [  987.482227] wlan3: authenticated
> [  987.549248] wlan3: associate with 00:80:5a:28:6e:0e (try 1)
> [  987.619266] wlan3: RX AssocResp from 00:80:5a:28:6e:0e (capab=0x431
> status=0 aid=2)
> [  987.619277] wlan3: associated
> [ 1052.580090] No probe response from AP 00:80:5a:28:6e:0e after 500ms,
> disconnecting.
> [ 1055.253290] wlan3: authenticate with 00:80:5a:28:6e:0e (try 1)
> [ 1055.452037] wlan3: authenticate with 00:80:5a:28:6e:0e (try 2)
> [ 1055.652037] wlan3: authenticate with 00:80:5a:28:6e:0e (try 3)
> [ 1055.852026] wlan3: authentication with 00:80:5a:28:6e:0e timed out
> [ 1067.613318] wlan3: direct probe to 00:80:5a:28:6e:0e (try 1)
> [ 1067.812078] wlan3: direct probe to 00:80:5a:28:6e:0e (try 2)
> [ 1068.012064] wlan3: direct probe to 00:80:5a:28:6e:0e (try 3)
> [ 1068.212074] wlan3: direct probe to 00:80:5a:28:6e:0e timed out
> [ 1070.721360] wlan3: direct probe to 00:80:5a:28:6e:0e (try 1)
> [ 1070.920045] wlan3: direct probe to 00:80:5a:28:6e:0e (try 2)
> [ 1070.921785] wlan3: direct probe responded
> [ 1070.921807] wlan3: authenticate with 00:80:5a:28:6e:0e (try 1)
> [ 1070.924439] wlan3: authenticated
> [ 1070.997292] wlan3: associate with 00:80:5a:28:6e:0e (try 1)
> [ 1071.067331] wlan3: RX AssocResp from 00:80:5a:28:6e:0e (capab=0x431
> status=0 aid=2)
> [ 1071.067343] wlan3: associated
> [ 1135.524026] No probe response from AP 00:80:5a:28:6e:0e after 500ms,
> disconnecting.
> [ 1138.197299] wlan3: authenticate with 00:80:5a:28:6e:0e (try 1)
> [ 1138.198807] wlan3: authenticated
> [ 1138.269275] wlan3: associate with 00:80:5a:28:6e:0e (try 1)
> [ 1138.338882] wlan3: RX AssocResp from 00:80:5a:28:6e:0e (capab=0x431
> status=0 aid=2)
> [ 1138.338891] wlan3: associated
> [ 1168.200236] show_signal_msg: 9 callbacks suppressed
> [ 1168.200249] gs[6547]: segfault at 8 ip 00272c67 sp bfc225f0 error 4
> in libtiff.so.4.3.3[26e000+57000]
> [ 1171.556051] No probe response from AP 00:80:5a:28:6e:0e after 500ms,
> disconnecting.
> [ 1174.225265] wlan3: authenticate with 00:80:5a:28:6e:0e (try 1)
> [ 1174.424037] wlan3: authenticate with 00:80:5a:28:6e:0e (try 2)
> [ 1174.624033] wlan3: authenticate with 00:80:5a:28:6e:0e (try 3)
> [ 1174.824035] wlan3: authentication with 00:80:5a:28:6e:0e timed out
> [ 1186.577240] wlan3: direct probe to 00:80:5a:28:6e:0e (try 1)
> [ 1186.776038] wlan3: direct probe to 00:80:5a:28:6e:0e (try 2)
> [ 1186.976070] wlan3: direct probe to 00:80:5a:28:6e:0e (try 3)
> [ 1187.176028] wlan3: direct probe to 00:80:5a:28:6e:0e timed out
> [ 1189.693350] wlan3: direct probe to 00:80:5a:28:6e:0e (try 1)
> [ 1189.892051] wlan3: direct probe to 00:80:5a:28:6e:0e (try 2)
> [ 1190.092031] wlan3: direct probe to 00:80:5a:28:6e:0e (try 3)
> [ 1190.292042] wlan3: direct probe to 00:80:5a:28:6e:0e timed out
> [ 1202.105706] wlan3: authenticate with 00:80:5a:28:6e:0e (try 1)
> [ 1202.107820] wlan3: authenticated
> [ 1202.181282] wlan3: associate with 00:80:5a:28:6e:0e (try 1)
> [ 1202.380044] wlan3: associate with 00:80:5a:28:6e:0e (try 2)
> [ 1202.382344] wlan3: RX AssocResp from 00:80:5a:28:6e:0e (capab=0x431
> status=0 aid=2)
> [ 1202.382352] wlan3: associated
> [ 2303.485359] hcfpcihw 0000:00:0c.0: PCI INT A disabled
> [ 2303.721466] hcfpcihw 0000:00:0c.0: PCI INT A -> GSI 16 (level, low)
> -> IRQ 16
> [ 2304.334881] ttySHCF0 at I/O 0xc000 (irq = 16) is a Conexant HCF
> controllerless PCI modem (PCI-14f1:1033-1092:0ac8)
> [ 2306.230645] process `sysctl' is using deprecated sysctl (syscall)
> net.ipv6.neigh.default.retrans_time; Use
> net.ipv6.neigh.default.retrans_time_ms instead.
> [ 2320.548027] No probe response from AP 00:80:5a:28:6e:0e after 500ms,
> disconnecting.
> [ 2323.214144] wlan3: authenticate with 00:80:5a:28:6e:0e (try 1)
> [ 2323.412034] wlan3: authenticate with 00:80:5a:28:6e:0e (try 2)
> [ 2323.612028] wlan3: authenticate with 00:80:5a:28:6e:0e (try 3)
> [ 2323.812027] wlan3: authentication with 00:80:5a:28:6e:0e timed out
> [ 2335.581731] wlan3: direct probe to 00:80:5a:28:6e:0e (try 1)
> [ 2335.780031] wlan3: direct probe to 00:80:5a:28:6e:0e (try 2)
> [ 2335.980037] wlan3: direct probe to 00:80:5a:28:6e:0e (try 3)
> [ 2336.180085] wlan3: direct probe to 00:80:5a:28:6e:0e timed out
> [ 2338.705313] wlan3: direct probe to 00:80:5a:28:6e:0e (try 1)
> [ 2338.904050] wlan3: direct probe to 00:80:5a:28:6e:0e (try 2)
> [ 2339.104072] wlan3: direct probe to 00:80:5a:28:6e:0e (try 3)
> [ 2339.304083] wlan3: direct probe to 00:80:5a:28:6e:0e timed out
> [ 2351.109477] wlan3: direct probe to 00:80:5a:28:6e:0e (try 1)
> [ 2351.308031] wlan3: direct probe to 00:80:5a:28:6e:0e (try 2)
> [ 2351.508044] wlan3: direct probe to 00:80:5a:28:6e:0e (try 3)
> [ 2351.708038] wlan3: direct probe to 00:80:5a:28:6e:0e timed out
> [ 2363.485259] wlan3: direct probe to 00:80:5a:28:6e:0e (try 1)
> [ 2363.684043] wlan3: direct probe to 00:80:5a:28:6e:0e (try 2)
> [ 2363.884062] wlan3: direct probe to 00:80:5a:28:6e:0e (try 3)
> [ 2364.084041] wlan3: direct probe to 00:80:5a:28:6e:0e timed out
> [ 2375.853316] wlan3: direct probe to 00:80:5a:28:6e:0e (try 1)
> [ 2376.052050] wlan3: direct probe to 00:80:5a:28:6e:0e (try 2)
> [ 2376.252030] wlan3: direct probe to 00:80:5a:28:6e:0e (try 3)
> [ 2376.452040] wlan3: direct probe to 00:80:5a:28:6e:0e timed out
> [ 2388.245325] wlan3: direct probe to 00:80:5a:28:6e:0e (try 1)
> [ 2388.444032] wlan3: direct probe to 00:80:5a:28:6e:0e (try 2)
> [ 2388.644032] wlan3: direct probe to 00:80:5a:28:6e:0e (try 3)
> [ 2388.844032] wlan3: direct probe to 00:80:5a:28:6e:0e timed out
> [ 2405.629307] wlan3: direct probe to 00:80:5a:28:6e:0e (try 1)
> [ 2405.828033] wlan3: direct probe to 00:80:5a:28:6e:0e (try 2)
> [ 2406.028043] wlan3: direct probe to 00:80:5a:28:6e:0e (try 3)
> [ 2406.228042] wlan3: direct probe to 00:80:5a:28:6e:0e timed out
> [ 2417.997338] wlan3: direct probe to 00:80:5a:28:6e:0e (try 1)
> [ 2418.196031] wlan3: direct probe to 00:80:5a:28:6e:0e (try 2)
> [ 2418.396041] wlan3: direct probe to 00:80:5a:28:6e:0e (try 3)
> [ 2418.596041] wlan3: direct probe to 00:80:5a:28:6e:0e timed out
> [ 2430.385248] wlan3: direct probe to 00:80:5a:28:6e:0e (try 1)
> [ 2430.584030] wlan3: direct probe to 00:80:5a:28:6e:0e (try 2)
> [ 2430.784038] wlan3: direct probe to 00:80:5a:28:6e:0e (try 3)
> [ 2430.984041] wlan3: direct probe to 00:80:5a:28:6e:0e timed out
> [ 2442.801298] wlan3: direct probe to 00:80:5a:28:6e:0e (try 1)
> [ 2443.000124] wlan3: direct probe to 00:80:5a:28:6e:0e (try 2)
> [ 2443.200037] wlan3: direct probe to 00:80:5a:28:6e:0e (try 3)
> [ 2443.400041] wlan3: direct probe to 00:80:5a:28:6e:0e timed out
> [ 2455.169583] wlan3: direct probe to 00:80:5a:28:6e:0e (try 1)
> [ 2455.368073] wlan3: direct probe to 00:80:5a:28:6e:0e (try 2)
> [ 2455.568039] wlan3: direct probe to 00:80:5a:28:6e:0e (try 3)
> [ 2455.768028] wlan3: direct probe to 00:80:5a:28:6e:0e timed out
> [ 3607.929090] hcfpcihw 0000:00:0c.0: PCI INT A disabled
> [ 3646.336789] hcfpcihw 0000:00:0c.0: PCI INT A -> GSI 16 (level, low)
> -> IRQ 16
> [ 3646.973085] ttySHCF0 at I/O 0xc000 (irq = 16) is a Conexant HCF
> controllerless PCI modem (PCI-14f1:1033-1092:0ac8)
> [ 3984.717732] hcfpcihw 0000:00:0c.0: PCI INT A disabled
> [ 4021.495374] hcfpcihw 0000:00:0c.0: PCI INT A -> GSI 16 (level, low)
> -> IRQ 16
> [ 4022.162141] ttySHCF0 at I/O 0xc000 (irq = 16) is a Conexant HCF
> controllerless PCI modem (PCI-14f1:1033-1092:0ac8)
> [ 4022.446913] hcfpcihw 0000:00:0c.0: PCI INT A disabled
> [ 4023.825258] hcfpcihw 0000:00:0c.0: PCI INT A -> GSI 16 (level, low)
> -> IRQ 16
> [ 4024.632717] ttySHCF0 at I/O 0xc000 (irq = 16) is a Conexant HCF
> controllerless PCI modem (PCI-14f1:1033-1092:0ac8)
>
> Module                  Size  Used by
> hcfpcihw                4979  0
> hcfpciserial           18627  1 hcfpcihw
> hcfpciengine          945480  2 hcfpcihw,hcfpciserial
> hcfpciosspec           58895  3 hcfpciserial,hcfpciengine
> nls_utf8                1069  1
> isofs                  30022  1
> binfmt_misc             6599  1
> slamr                 420449  0
> ungrab_winmodem         1003  0
> ch7006                 16545  1
> snd_ens1371            18782  2
> nouveau               516971  2
> snd_usb_audio          86704  2
> snd_ac97_codec         99227  1 snd_ens1371
> ac97_bus                1014  1 snd_ac97_codec
> snd_pcm                71475  3 snd_ens1371,snd_ac97_codec,snd_usb_audio
> arc4                    1165  4
> snd_hwdep               5040  1 snd_usb_audio
> snd_usbmidi_lib        17413  1 snd_usb_audio
> snd_seq_midi            4588  0
> ttm                    56633  1 nouveau
> rtl8187                51470  0
> b43                   168681  0
> snd_rawmidi            17783  3 snd_ens1371,snd_usbmidi_lib,snd_seq_midi
> drm_kms_helper         30200  2 ch7006,nouveau
> snd_seq_midi_event      6047  1 snd_seq_midi
> mac80211              231541  2 rtl8187,b43
> snd_seq                47174  2 snd_seq_midi,snd_seq_midi_event
> ppdev                   5556  0
> snd_timer              19067  2 snd_pcm,snd_seq
> snd_seq_device          5744  3 snd_seq_midi,snd_rawmidi,snd_seq
> drm                   168054  5 ch7006,nouveau,ttm,drm_kms_helper
> ns558                   3068  0
> cfg80211              144470  3 rtl8187,b43,mac80211
> parport_pc             26058  1
> eeprom_93cx6            1345  1 rtl8187
> gameport                9327  3 snd_ens1371,ns558
> i2c_viapro              5777  0
> via_agp                 5322  1
> snd                    49006  18
> snd_ens1371,snd_ac97_codec,snd_usb_audio,snd_pcm,snd_hwdep,snd_usbmidi_lib,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
> i2c_algo_bit            5168  1 nouveau
> soundcore                880  1 snd
> led_class               2633  2 rtl8187,b43
> snd_page_alloc          7120  1 snd_pcm
> shpchp                 29886  0
> agpgart                32011  3 ttm,drm,via_agp
> lp                      7342  0
> parport                31492  3 ppdev,parport_pc,lp
> 8139too                19581  0
> usbhid                 36882  0
> hid                    67742  1 usbhid
> usb_storage            40172  0
> via_rhine              19038  0
> pata_via                7300  1
> 8139cp                 16934  0
> sata_via                7344  2
> ssb                    39288  1 b43
> floppy                 54311  0
> mii                     4425  3 8139too,via_rhine,8139cp
>
>
>



[Index of Archives]     [Linux Media Development]     [Asterisk]     [DCCP]     [Netdev]     [X.org]     [Xfree86]     [Fedora Women]     [Linux USB]

  Powered by Linux