Re: bgp require in multigateway routing | |
| [Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] | |
somebody suggest me to use border gateway protocol for this, but i don't have any knowledge about this protocol that it will useful for me our not, and plz also guide me how to configure this protocol.
considering the bandwidth, i dont think your ISP would even start to think about BGP, not to mention the fact that as long as you use the same ISP I'd rather think of OSPF or even RIPv2. Also, there is a question of support on modem, as from what you say its actually a router with adsl modem integrated, so it should take part of dynamic routing. All in all, first question to ask is what your ISP is willing to do in this case. As an alternative you can always run some checks on links and switch routing information (aspecially default route, or selection of routing table in policy routing) in static table from some cron script / daemon accordingly.
-- Radek aka Goblin goblin@xxxxxxxxx _______________________________________________ LARTC mailing list LARTC@xxxxxxxxxxxxxxx http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc