RE: prio qdisc not wokring

["Salim S I" <salim.si@xxxxxxxxxxxxxxxx>]

If you use filters, you can use src IP or TOS to send traffic from different clients to different bands. There is no connection tracking in qdisc, the priority mapping is done according to the TC_PRIO.

I think this will help

http://www.opalsoft.net/qos/DS-23.htm

 

-----Original Message-----
From: Archana Rajagopal [mailto:archana.gopal@xxxxxxxxx]
Sent: Friday, December 07, 2007 10:36 AM
To: Salim S I
Cc: lartc@xxxxxxxxxxxxxxx
Subject: Re: prio qdisc not wokring

 

Thank you for the reply!
Is prio per flow based or per connection based.I mean if I have two clients(two different systems)each sending different flows of traffic, it seems to classify flows from one system but it does not aggregate the flows of same priority of all clients.Is this observation correct?How do I aggregate the flows?

Thank you
Archana.

On Dec 6, 2007 8:40 PM, Salim S I <salim.si@xxxxxxxxxxxxxxxx > wrote:

I do not know about TOS, but it can be mapped well with filters.

 

-----Original Message-----
From: lartc-bounces@xxxxxxxxxxxxxxx [mailto:lartc-bounces@xxxxxxxxxxxxxxx] On Behalf Of Archana Rajagopal
Sent: Friday, December 07, 2007 2:56 AM
To: lartc@xxxxxxxxxxxxxxx
Subject: prio qdisc not wokring

 

Hi,
   I am working on linux 2.6.16.I tried to prioritize traffic using prio module but its not working well.It always maps to same class irrespective of ToS.Is it possible to fix it using filters?Anybody fixed this problem?

--
Regards
Archana Rajagopal

--
Regards
Archana Rajagopal

_______________________________________________
LARTC mailing list
LARTC@xxxxxxxxxxxxxxx
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc