Re: tc doesn't shape correct

Linux Advanced Routing and Traffic Control

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Here is my tc config, maybe something is wrong with that config:

/sbin/tc qdisc  del dev bond1 root
/sbin/tc qdisc  add dev bond1 root handle 1: htb default 1
/sbin/tc class  add dev bond1 parent 1: classid 1:1 htb rate 1000mbit burst 1310720
/sbin/tc class  add dev bond1 parent 1: classid 1:2 htb rate 30mbit burst 39321
/sbin/tc class  add dev bond1 parent 1: classid 1:3 htb rate 10mbit burst 13107
/sbin/tc filter add dev bond1 parent 1: protocol ip prio 0 handle 1 fw flowid 1:2
/sbin/tc filter add dev bond1 parent 1: protocol ip prio 0 handle 2 fw flowid 1:3


Any help appreciated!

Johan Huysmans wrote:
Hi All,

I'm configuring my natting-firewall to do some tc shaping. Some traffic has to be shaped on 30mbit, some on 10mbit all the others are unlimited. The configuring and filtering works correctly. The traffic that is shaped at 30mbit is correct, but the traffic that is shapped at 10mbit only gets to 100KB/sec.

It is on a device configured with bonding (both in and out interface).

Any clue why shaped traffic at 10mbit only gets to 100KB/sec and not faster?

Thx for any response,
Johan Huysmans
_______________________________________________
LARTC mailing list
LARTC@xxxxxxxxxxxxxxx
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
_______________________________________________
LARTC mailing list
LARTC@xxxxxxxxxxxxxxx
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc

[Index of Archives]     [LARTC Home Page]     [Netfilter]     [Netfilter Development]     [Network Development]     [Bugtraq]     [GCC Help]     [Yosemite News]     [Linux Kernel]     [Fedora Users]
  Powered by Linux